Partage de fichier entre debian et xp pro

bonjour et merci d’avance de lire ce message
donc j ai accés au fichiers en partage du xp pro depuis ma debian lenny sans probleme mais xp pro ne vois pas du tout ma debian sur le reseau
les deux machines sont en reseau par le routeur alicebox
petite precision je n’arrive pas a mettre en partage un fichier depuis shares-admin…
voici mon smb.conf

[global]

Browsing/Identification

Change this to the workgroup/NT-domain name your Samba server will part of

workgroup = workgroup

server string is the equivalent of the NT Description field

server string = %h server

Windows Internet Name Serving Support Section:

WINS Support - Tells the NMBD component of Samba to enable its WINS Server

wins support = no

WINS Server - Tells the NMBD components of Samba to be a WINS Client

Note: Samba can be either a WINS Server, or a WINS Client, but NOT both

; wins server = w.x.y.z

This will prevent nmbd to search for NetBIOS names through DNS.

dns proxy = no

What naming service and in what order should we use to resolve host names

to IP addresses

; name resolve order = lmhosts host wins bcast

Allow users to create shares

usershare owner only = YES

Partage public

map to guest = Bad User

Autoriser l’accès a certains réseaux (le point final est important)

hosts allow = 192.168.1.2.

Networking

The specific set of interfaces / networks to bind to

This can be either the interface name or an IP address/netmask;

interface names are normally preferred

; interfaces = 127.0.0.0/8 eth0

Only bind to the named interfaces and/or networks; you must use the

‘interfaces’ option above to use this.

It is recommended that you enable this feature if your Samba machine is

not protected by a firewall or is a firewall itself. However, this

option cannot handle dynamic or non-broadcast interfaces correctly.

; bind interfaces only = yes

Debugging/Accounting

This tells Samba to use a separate log file for each machine

that connects

log file = /var/log/samba/log.%m

Cap the size of the individual log files (in KiB).

max log size = 1000

If you want Samba to only log through syslog then set the following

parameter to ‘yes’.

syslog only = no

We want Samba to log a minimum amount of information to syslog. Everything

should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log

through syslog you should set the following parameter to something higher.

syslog = 0

Do something sensible when Samba crashes: mail the admin a backtrace

panic action = /usr/share/samba/panic-action %d

####### Authentication #######

“security = user” is always a good idea. This will require a Unix account

in this server for every user accessing the server. See

/usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html

in the samba-doc package for details.

security = share

You may wish to use password encryption. See the section on

‘encrypt passwords’ in the smb.conf(5) manpage before enabling.

encrypt passwords = true

If you are using encrypted passwords, Samba will need to know what

password database type you are using.

passdb backend = tdbsam

obey pam restrictions = yes

This boolean parameter controls whether Samba attempts to sync the Unix

password with the SMB password when the encrypted SMB password in the

passdb is changed.

unix password sync = yes

For Unix password sync to work on a Debian GNU/Linux system, the following

parameters must be set (thanks to Ian Kahan <kahan@informatik.tu-muenchen.de for

sending the correct chat script for the passwd program in Debian Sarge).

passwd program = /usr/bin/passwd %u
passwd chat = Enter\snew\s\spassword:* %n\n Retype\snew\s\spassword:* %n\n password\supdated\ssuccessfully .

This boolean controls whether PAM will be used for password changes

when requested by an SMB client instead of the program listed in

‘passwd program’. The default is ‘no’.

pam password change = yes

########## Domains ###########

Is this machine able to authenticate users. Both PDC and BDC

must have this setting enabled. If you are the BDC you must

change the ‘domain master’ setting to no

; domain logons = yes

The following setting only takes effect if ‘domain logons’ is set

It specifies the location of the user’s profile directory

from the client point of view)

The following required a [profiles] share to be setup on the

samba server (see below)

; logon path = \%N\profiles%U

Another common choice is storing the profile in the user’s home directory

(this is Samba’s default)

logon path = \%N%U\profile

The following setting only takes effect if ‘domain logons’ is set

It specifies the location of a user’s home directory (from the client

point of view)

; logon drive = H:

logon home = \%N%U

The following setting only takes effect if ‘domain logons’ is set

It specifies the script to run during logon. The script must be stored

in the [netlogon] share

NOTE: Must be store in ‘DOS’ file format convention

; logon script = logon.cmd

This allows Unix users to be created on the domain controller via the SAMR

RPC pipe. The example command creates a user account with a disabled Unix

password; please adapt to your needs

; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos “” %u

This allows machine accounts to be created on the domain controller via the

SAMR RPC pipe.

The following assumes a “machines” group exists on the system

; add machine script = /usr/sbin/useradd -g machines -c “%u machine account” -d /var/lib/samba -s /bin/false %u

This allows Unix groups to be created on the domain controller via the SAMR

RPC pipe.

; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

If you want to automatically load your printer list rather

than setting them up individually then you’ll need this

load printers = yes

lpr(ng) printing. You may wish to override the location of the

printcap file

; printing = bsd
; printcap name = /etc/printcap

CUPS printing. See also the cupsaddsmb(8) manpage in the

cupsys-client package.

; printing = cups
; printcap name = cups

############ Misc ############

Using the following line enables you to customise your configuration

on a per machine basis. The %m gets replaced with the netbios name

of the machine that is connecting

; include = /home/samba/etc/smb.conf.%m

Most people will find that this option gives better performance.

See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html

for details

You may want to add the following on a Linux system:

SO_RCVBUF=8192 SO_SNDBUF=8192

socket options = TCP_NODELAY

The following parameter is useful only if you have the linpopup package

installed. The samba maintainer and the linpopup maintainer are

working to ease installation and configuration of linpopup and samba.

; message command = /bin/sh -c ‘/usr/bin/linpopup “%f” “%m” %s; rm %s’ &

Domain Master specifies Samba to be the Domain Master Browser. If this

machine will be configured as a BDC (a secondary logon server), you

must set this to ‘no’; otherwise, the default behavior is recommended.

domain master = auto

Some defaults for winbind (make sure you’re not using the ranges

for something else.)

; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

The following was the default behaviour in sarge,

but samba upstream reverted the default because it might induce

performance issues in large organizations.

See Debian bug #368251 for some of the consequences of not

having this setting and smb.conf(5) for details.

; winbind enum groups = yes
; winbind enum users = yes

Setup usershare options to enable non-root users to share folders

with the net usershare command.

Maximum number of usershare. 0 (default) means that usershare is disabled.

; usershare max shares = 100

#======================= Share Definitions =======================

[homes]
comment = Home Directories
browseable = no

By default, the home directories are exported read-only. Change the

next parameter to ‘no’ if you want to be able to write to them.

read only = no

File creation mask is set to 0700 for security reasons. If you want to

create files with group=rw permissions, set next parameter to 0775.

create mask = 0775

Directory creation mask is set to 0700 for security reasons. If you want to

create dirs. with group=rw permissions, set next parameter to 0775.

directory mask = 0775

By default, \server\username shares can be connected to by anyone

with access to the samba server.

The following parameter makes sure that only “username” can connect

to \server\username

This might need tweaking when using external authentication schemes

valid users = %S

Un-comment the following and create the netlogon directory for Domain Logons

(you need to configure Samba to act as a domain controller too.)

;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
; share modes = no

Un-comment the following and create the profiles directory to store

users profiles (see the “logon path” option above)

(you need to configure Samba to act as a domain controller too.)

The path below should be writable by all users so that their

profile directory may be created the first time they log on

;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700

Windows clients look for this share name as a source of downloadable

printer drivers

[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no

Uncomment to allow remote administration of Windows print drivers.

You may need to replace ‘lpadmin’ with the name of the group your

admin users are members of.

Please note that you also need to set appropriate Unix permissions

to the drivers directory for these users to have write rights in it

; write list = root, @lpadmin

A sample share for sharing your CD-ROM with others.

;[cdrom]
; comment = Samba server’s CD-ROM
; read only = yes
; locking = no
; path = /cdrom
; guest ok = yes

The next two parameters show how to auto-mount a CD-ROM when the

cdrom share is accesed. For this to work /etc/fstab must contain

an entry like this:

/dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0

The CD-ROM gets unmounted automatically after the connection to the

If you don’t want to use auto-mounting/unmounting make sure the CD

is mounted on /cdrom

; preexec = /bin/mount /cdrom
; postexec = /bin/umount /cdrom

[vidéos]
path = /home/adilly/Vidéos
available = yes
browsable = yes
public = yes
writable = yes
guest ok = yes

merci d’avance

bonjour

hosts allow = 192.168.1.2.
il ne doit pas y avoir de point a la fin ici
192.168.1. pour toutes les adresses de 192.168.1.0 à 192.168.1.255
si tu veux juste 192.168.1.2
hosts allow = 192.168.1.2
pour voir le partage il faut un nom netbios (dans [global])
netbios name = mon_partage
:smt006

merci de m’aider ,je sais que c’est un probleme qui reviens souvent
xp pro ne voit toujours pas ma debian et pourtant il ping bien cette derniére
petite precision, je n’arrive pas a mettre un dossier en partage avec shares-admin meme en root
donc voici mon smb.conf modifié

[global]

Browsing/Identification

Nom de la machine

netbios name =ADILLY

Change this to the workgroup/NT-domain name your Samba server will part of

workgroup = WORKGROUP

server string is the equivalent of the NT Description field

server string = %h server

Windows Internet Name Serving Support Section:

WINS Support - Tells the NMBD component of Samba to enable its WINS Server

wins support = no

WINS Server - Tells the NMBD components of Samba to be a WINS Client

Note: Samba can be either a WINS Server, or a WINS Client, but NOT both

; wins server = w.x.y.z

This will prevent nmbd to search for NetBIOS names through DNS.

dns proxy = no

What naming service and in what order should we use to resolve host names

to IP addresses

; name resolve order = lmhosts host wins bcast

Allow users to create shares

usershare owner only = YES

Partage public

map to guest = Bad User

Autoriser l’accès a certains réseaux (le point final est important)

hosts allow = 192.168.1.

Networking

The specific set of interfaces / networks to bind to

This can be either the interface name or an IP address/netmask;

interface names are normally preferred

; interfaces = 127.0.0.0/8 eth0

Only bind to the named interfaces and/or networks; you must use the

‘interfaces’ option above to use this.

It is recommended that you enable this feature if your Samba machine is

not protected by a firewall or is a firewall itself. However, this

option cannot handle dynamic or non-broadcast interfaces correctly.

; bind interfaces only = yes

Debugging/Accounting

This tells Samba to use a separate log file for each machine

that connects

log file = /var/log/samba/log.%m

Cap the size of the individual log files (in KiB).

max log size = 1000

If you want Samba to only log through syslog then set the following

parameter to ‘yes’.

syslog only = no

We want Samba to log a minimum amount of information to syslog. Everything

should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log

through syslog you should set the following parameter to something higher.

syslog = 0

Do something sensible when Samba crashes: mail the admin a backtrace

panic action = /usr/share/samba/panic-action %d

####### Authentication #######

“security = user” is always a good idea. This will require a Unix account

in this server for every user accessing the server. See

/usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html

in the samba-doc package for details.

security = share
username map = /etc/samba/smbusers

You may wish to use password encryption. See the section on

‘encrypt passwords’ in the smb.conf(5) manpage before enabling.

encrypt passwords = true

If you are using encrypted passwords, Samba will need to know what

password database type you are using.

passdb backend = tdbsam

obey pam restrictions = yes

This boolean parameter controls whether Samba attempts to sync the Unix

password with the SMB password when the encrypted SMB password in the

passdb is changed.

unix password sync = yes

For Unix password sync to work on a Debian GNU/Linux system, the following

parameters must be set (thanks to Ian Kahan <kahan@informatik.tu-muenchen.de for

sending the correct chat script for the passwd program in Debian Sarge).

passwd program = /usr/bin/passwd %u
passwd chat = Enter\snew\s\spassword:* %n\n Retype\snew\s\spassword:* %n\n password\supdated\ssuccessfully .

This boolean controls whether PAM will be used for password changes

when requested by an SMB client instead of the program listed in

‘passwd program’. The default is ‘no’.

pam password change = yes

########## Domains ###########

Is this machine able to authenticate users. Both PDC and BDC

must have this setting enabled. If you are the BDC you must

change the ‘domain master’ setting to no

domain logons = yes

The following setting only takes effect if ‘domain logons’ is set

It specifies the location of the user’s profile directory

from the client point of view)

The following required a [profiles] share to be setup on the

samba server (see below)

; logon path = \%N\profiles%U

Another common choice is storing the profile in the user’s home directory

(this is Samba’s default)

logon path = \%N%U\profile

The following setting only takes effect if ‘domain logons’ is set

It specifies the location of a user’s home directory (from the client

point of view)

; logon drive = H:

logon home = \%N%U

The following setting only takes effect if ‘domain logons’ is set

It specifies the script to run during logon. The script must be stored

in the [netlogon] share

NOTE: Must be store in ‘DOS’ file format convention

; logon script = logon.cmd

This allows Unix users to be created on the domain controller via the SAMR

RPC pipe. The example command creates a user account with a disabled Unix

password; please adapt to your needs

; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos “” %u

This allows machine accounts to be created on the domain controller via the

SAMR RPC pipe.

The following assumes a “machines” group exists on the system

; add machine script = /usr/sbin/useradd -g machines -c “%u machine account” -d /var/lib/samba -s /bin/false %u

This allows Unix groups to be created on the domain controller via the SAMR

RPC pipe.

; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

If you want to automatically load your printer list rather

than setting them up individually then you’ll need this

load printers = yes

lpr(ng) printing. You may wish to override the location of the

printcap file

; printing = bsd
; printcap name = /etc/printcap

CUPS printing. See also the cupsaddsmb(8) manpage in the

cupsys-client package.

; printing = cups
; printcap name = cups

############ Misc ############

Using the following line enables you to customise your configuration

on a per machine basis. The %m gets replaced with the netbios name

of the machine that is connecting

; include = /home/samba/etc/smb.conf.%m

Most people will find that this option gives better performance.

See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html

for details

You may want to add the following on a Linux system:

SO_RCVBUF=8192 SO_SNDBUF=8192

socket options = TCP_NODELAY

The following parameter is useful only if you have the linpopup package

installed. The samba maintainer and the linpopup maintainer are

working to ease installation and configuration of linpopup and samba.

; message command = /bin/sh -c ‘/usr/bin/linpopup “%f” “%m” %s; rm %s’ &

Domain Master specifies Samba to be the Domain Master Browser. If this

machine will be configured as a BDC (a secondary logon server), you

must set this to ‘no’; otherwise, the default behavior is recommended.

domain master = auto

Some defaults for winbind (make sure you’re not using the ranges

for something else.)

; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

The following was the default behaviour in sarge,

but samba upstream reverted the default because it might induce

performance issues in large organizations.

See Debian bug #368251 for some of the consequences of not

having this setting and smb.conf(5) for details.

; winbind enum groups = yes
; winbind enum users = yes

Setup usershare options to enable non-root users to share folders

with the net usershare command.

Maximum number of usershare. 0 (default) means that usershare is disabled.

; usershare max shares = 100

#======================= Share Definitions =======================

By default, the home directories are exported read-only. Change the

next parameter to ‘no’ if you want to be able to write to them.

read only = no

File creation mask is set to 0700 for security reasons. If you want to

create files with group=rw permissions, set next parameter to 0775.

create mask = 0775

Directory creation mask is set to 0700 for security reasons. If you want to

create dirs. with group=rw permissions, set next parameter to 0775.

directory mask = 0775

By default, \server\username shares can be connected to by anyone

with access to the samba server.

The following parameter makes sure that only “username” can connect

to \server\username

This might need tweaking when using external authentication schemes

valid users = %S

Un-comment the following and create the netlogon directory for Domain Logons

(you need to configure Samba to act as a domain controller too.)

[netlogon]
comment = Repertoires scripts
path = /var/samba/netlogon
browseable = No

Un-comment the following and create the profiles directory to store

users profiles (see the “logon path” option above)

(you need to configure Samba to act as a domain controller too.)

The path below should be writable by all users so that their

profile directory may be created the first time they log on

[profiles]
comment = Homes windows
path = /var/samba/profiles
browseable = No
read only = No

[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700

[homes]
comment = Répertoires personnels
path = /home/%U
browseable = No
read only = No

Windows clients look for this share name as a source of downloadable

printer drivers

[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no

Uncomment to allow remote administration of Windows print drivers.

You may need to replace ‘lpadmin’ with the name of the group your

admin users are members of.

Please note that you also need to set appropriate Unix permissions

to the drivers directory for these users to have write rights in it

; write list = root, @lpadmin

A sample share for sharing your CD-ROM with others.

;[cdrom]
; comment = Samba server’s CD-ROM
; read only = yes
; locking = no
; path = /cdrom
; guest ok = yes

The next two parameters show how to auto-mount a CD-ROM when the

cdrom share is accesed. For this to work /etc/fstab must contain

an entry like this:

/dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0

The CD-ROM gets unmounted automatically after the connection to the

If you don’t want to use auto-mounting/unmounting make sure the CD

is mounted on /cdrom

; preexec = /bin/mount /cdrom
; postexec = /bin/umount /cdrom

[vidéos]
path = /home/adilly/Vidéos
available = yes
browsable = yes
public = yes
writable = yes
guest ok = yes

[photos]
path = /home/adilly/Images
available = yes
browsable = yes
public = yes
writable = yes
guest ok = yes

Il te suffit de mettre ADILLY et l’IP dans le lmhosts du XP ou encore de déclarer soit un serveur WINS extérieur soit de mettre ADILLY en serveur WINS par

wins support = yes

Le XP Pro verra ta machine.

merci de m’aider
j 'ai finis par reussir a force de bidouiller avec les tutos qui trainent par ci par la
j’ai dabbord reutiliser un smb.conf venant d’une installation precedente avec ubuntu car le partage marchais trés bien.
aprés l avoir recopier ,j’ai redemarrer mais toujours rien,
et la je fais un /etc/init.d/samba restart, je reteste le partage,debian vois les dossier xp et miracle xp vois enfin ma chére debian!
j’ai donc ecrit un script pour relancer samba a chaque demarrage demarrage et le partage marche dans tout les sens
quelqun sait il pourqoui je dois faire un samba restart?
de toute facon je suis trés content que ca marche aprés 3 nuit a chercher

Il te faut attendre, sur un Netbios, les machines peuvent mettre 12 minutes avant de toutes se voir mulutellement (par broadcast, sur un netbios, les machines passent leur temps à gueuler «il y a qq’un? je suis là!»)

Salut,

Tu n’es pas obligé de communiquer ton samba.conf, mais on ne sait jamais, cela aiderait certains à démarrer :slightly_smiling:

voici mon smb.conf

#======================= Global Settings =======================

[global]

Browsing/Identification

#nom de la machine
netbios name = ADILLY

Change this to the workgroup/NT-domain name your Samba server will part of

workgroup = WORKGROUP

server string is the equivalent of the NT Description field

server string = %h server

Windows Internet Name Serving Support Section:

WINS Support - Tells the NMBD component of Samba to enable its WINS Server

; wins support = no

WINS Server - Tells the NMBD components of Samba to be a WINS Client

Note: Samba can be either a WINS Server, or a WINS Client, but NOT both

; wins server = w.x.y.z

This will prevent nmbd to search for NetBIOS names through DNS.

dns proxy = no

What naming service and in what order should we use to resolve host names

to IP addresses

; name resolve order = lmhosts host wins bcast

Allow users to create shares

usershare owner only = False

Networking

The specific set of interfaces / networks to bind to

This can be either the interface name or an IP address/netmask;

interface names are normally preferred

; interfaces = 127.0.0.0/8 eth0

Only bind to the named interfaces and/or networks; you must use the

‘interfaces’ option above to use this.

It is recommended that you enable this feature if your Samba machine is

not protected by a firewall or is a firewall itself. However, this

option cannot handle dynamic or non-broadcast interfaces correctly.

; bind interfaces only = true

Debugging/Accounting

This tells Samba to use a separate log file for each machine

that connects

log file = /var/log/samba/log.%m

Cap the size of the individual log files (in KiB).

max log size = 1000

If you want Samba to only log through syslog then set the following

parameter to ‘yes’.

; syslog only = no

We want Samba to log a minimum amount of information to syslog. Everything

should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log

through syslog you should set the following parameter to something higher.

syslog = 0

Do something sensible when Samba crashes: mail the admin a backtrace

panic action = /usr/share/samba/panic-action %d

####### Authentication #######

“security = user” is always a good idea. This will require a Unix account

in this server for every user accessing the server. See

/usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html

in the samba-doc package for details.

; security = share

You may wish to use password encryption. See the section on

‘encrypt passwords’ in the smb.conf(5) manpage before enabling.

encrypt passwords = true

If you are using encrypted passwords, Samba will need to know what

password database type you are using.

passdb backend = tdbsam

obey pam restrictions = yes

; guest account = nobody
invalid users = root

This boolean parameter controls whether Samba attempts to sync the Unix

password with the SMB password when the encrypted SMB password in the

passdb is changed.

unix password sync = yes

For Unix password sync to work on a Debian GNU/Linux system, the following

parameters must be set (thanks to Ian Kahan <kahan@informatik.tu-muenchen.de for

sending the correct chat script for the passwd program in Debian Sarge).

passwd program = /usr/bin/passwd %u
passwd chat = Enter\snew\s\spassword:* %n\n Retype\snew\s\spassword:* %n\n password\supdated\ssuccessfully .

This boolean controls whether PAM will be used for password changes

when requested by an SMB client instead of the program listed in

‘passwd program’. The default is ‘no’.

pam password change = yes

This option controls how nsuccessful authentication attempts are mapped

to anonymous connections

map to guest = bad user

########## Domains ###########

Is this machine able to authenticate users. Both PDC and BDC

must have this setting enabled. If you are the BDC you must

change the ‘domain master’ setting to no

; domain logons = yes

The following setting only takes effect if ‘domain logons’ is set

It specifies the location of the user’s profile directory

from the client point of view)

The following required a [profiles] share to be setup on the

samba server (see below)

; logon path = \%N\profiles%U

Another common choice is storing the profile in the user’s home directory

; logon path = \%N%U\profile

The following setting only takes effect if ‘domain logons’ is set

It specifies the location of a user’s home directory (from the client

point of view)

; logon drive = H:
; logon home = \%N%U

The following setting only takes effect if ‘domain logons’ is set

It specifies the script to run during logon. The script must be stored

in the [netlogon] share

NOTE: Must be store in ‘DOS’ file format convention

; logon script = logon.cmd

This allows Unix users to be created on the domain controller via the SAMR

RPC pipe. The example command creates a user account with a disabled Unix

password; please adapt to your needs

; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos “” %u

########## Printing ##########

If you want to automatically load your printer list rather

than setting them up individually then you’ll need this

; load printers = yes

lpr(ng) printing. You may wish to override the location of the

printcap file

; printing = bsd
; printcap name = /etc/printcap

CUPS printing. See also the cupsaddsmb(8) manpage in the

cupsys-client package.

; printing = cups
; printcap name = cups

############ Misc ############

Using the following line enables you to customise your configuration

on a per machine basis. The %m gets replaced with the netbios name

of the machine that is connecting

; include = /home/samba/etc/smb.conf.%m

Most people will find that this option gives better performance.

See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html

for details

You may want to add the following on a Linux system:

SO_RCVBUF=8192 SO_SNDBUF=8192

socket options = TCP_NODELAY

The following parameter is useful only if you have the linpopup package

installed. The samba maintainer and the linpopup maintainer are

working to ease installation and configuration of linpopup and samba.

; message command = /bin/sh -c ‘/usr/bin/linpopup “%f” “%m” %s; rm %s’ &

Domain Master specifies Samba to be the Domain Master Browser. If this

machine will be configured as a BDC (a secondary logon server), you

must set this to ‘no’; otherwise, the default behavior is recommended.

; domain master = auto

Some defaults for winbind (make sure you’re not using the ranges

for something else.)

; idmap uid = 10000-20000
; idmap gid = 10000-20000
; template shell = /bin/bash

The following was the default behaviour in sarge,

but samba upstream reverted the default because it might induce

performance issues in large organizations.

See Debian bug #368251 for some of the consequences of not

having this setting and smb.conf(5) for details.

; winbind enum groups = yes
; winbind enum users = yes

Setup usershare options to enable non-root users to share folders

with the net usershare command.

Maximum number of usershare. 0 (default) means that usershare is disabled.

; usershare max shares = 100

Allow users who’ve been granted usershare privileges to create

public shares, not just authenticated ones

usershare allow guests = yes

#======================= Share Definitions =======================

Un-comment the following (and tweak the other settings below to suit)

to enable the default home directory shares. This will share each

user’s home directory as \server\username

;[homes]
; comment = Home Directories
; browseable = no

By default, the home directories are exported read-only. Change the

next parameter to ‘no’ if you want to be able to write to them.

; read only = yes

File creation mask is set to 0700 for security reasons. If you want to

create files with group=rw permissions, set next parameter to 0775.

; create mask = 0700

Directory creation mask is set to 0700 for security reasons. If you want to

create dirs. with group=rw permissions, set next parameter to 0775.

; directory mask = 0700

By default, \server\username shares can be connected to by anyone

with access to the samba server. Un-comment the following parameter

to make sure that only “username” can connect to \server\username

This might need tweaking when using external authentication schemes

; valid users = %S

Un-comment the following and create the netlogon directory for Domain Logons

(you need to configure Samba to act as a domain controller too.)

;[netlogon]
; comment = Network Logon Service
; path = /home/samba/netlogon
; guest ok = yes
; read only = yes
; share modes = yes

Un-comment the following and create the profiles directory to store

users profiles (see the “logon path” option above)

(you need to configure Samba to act as a domain controller too.)

The path below should be writable by all users so that their

profile directory may be created the first time they log on

;[profiles]
; comment = Users profiles
; path = /home/samba/profiles
; guest ok = no
; browseable = no
; create mask = 0600
; directory mask = 0700

wins support = no
[printers]
comment = All Printers
browseable = no
path = /var/spool/samba
printable = yes
guest ok = no
read only = yes
create mask = 0700

Windows clients look for this share name as a source of downloadable

printer drivers

[print$]
comment = Printer Drivers
path = /var/lib/samba/printers
browseable = yes
read only = yes
guest ok = no

Uncomment to allow remote administration of Windows print drivers.

Replace ‘ntadmin’ with the name of the group your admin users are

members of.

; write list = root, @ntadmin

A sample share for sharing your CD-ROM with others.

;[cdrom]
; comment = Samba server’s CD-ROM
; read only = yes
; locking = no
; path = /cdrom
; guest ok = yes

The next two parameters show how to auto-mount a CD-ROM when the

cdrom share is accesed. For this to work /etc/fstab must contain

an entry like this:

/dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0

The CD-ROM gets unmounted automatically after the connection to the

If you don’t want to use auto-mounting/unmounting make sure the CD

is mounted on /cdrom

; preexec = /bin/mount /cdrom
; postexec = /bin/umount /cdrom

[vidéos]
path = /home/adilly/Vidéos
available = yes
browsable = yes
public = yes
writable = yes
guest ok = yes

[photos]
path = /home/adilly/Images
available = yes
browsable = yes
public = yes
writable = yes
guest ok = yes

[HDD multimedia]
path = /media/Iomega ScreenPlay HD
available = yes
browsable = yes
public = yes
writable = yes
guest ok = yes

chez moi ce smb.conf ne fonctionne pas .
je vois le partage mais “inaccessible” selon vista

[quote=“gus77111”]voici mon smb.conf[/quote] :smt023