bonjour,
suite à un problème qui n’en n’est pas un ,ma sid demarre uniquement en console,je voudrais faire une nouvelle partition ,pour installer Squeese qui me permettra d’avoir toute mes application,le temps d’avancer sur l’utilisation de sid en console(mais c’est un autre sujet)
donc ma requete et simple j’ai lu le wiki isalo.org/wiki.debian-fr/ind … ionnements
mais je ne trouve pas la commande me permettant de faire cette opération
un lien svp
Salut,
Tu peux le faire en 2 lignes de commandes:
apt-get install parted
man parted
Un lien: linux.die.net/man/8/parted
merci,
mais encore une question, qui me turlupine depuis quelque temps,lors du partitionnement,Gparted indique une valeur swap d’une fois et demi le Ram, j’ai “entendu” qu’1GB à 1.5GB serait suffisant, est-ce exact?
Salut,
Avec les quantités de mémoire de nos ordinateurs actuels, la swap ne sert que rarement sauf si tu utilises la fonction Hiberner, auquel cas il te faut une swap légèrement supérieure à cette quantité de mémoire vive pour pouvoir y stocker un instantané de celle-ci.
gparted c’est vraiment du mode console ? 
non non ,c’etait pour un petit plus d’info 
bon j’ai reinstallé Ma Squeese, j’ai l’esprit plus tranquille 
je vais être plus serein pour l’avenir, avec sid 
heureusement que j’avais une autre machine sous la main, merci pour tout
gparted non, parted, oui
Salut,
Oui, ça me fait (re)penser que ce n’est effectivement pas complet sans les programmes pour partitionner…
Tellement de trucs à faire… 
[quote=“lol”]
Tellement de trucs à faire… [/quote]
dès que j’ai un moment je complète
[code]PARTED(8) GNU Parted Manual PARTED(8)
NAME
GNU Parted - a partition manipulation program
SYNOPSIS
parted [options] [device [command [options…]…]]
DESCRIPTION
parted is a disk partitioning and partition resizing program. It
allows you to create, destroy, resize, move and copy ext2, linux-swap,
FAT, FAT32, and reiserfs partitions. It can create, resize, and move
Macintosh HFS partitions, as well as detect jfs, ntfs, ufs, and xfs
partitions. It is useful for creating space for new operating systems,
reorganising disk usage, and copying data to new hard disks.
This manual page documents parted briefly. Complete documentation is
distributed with the package in GNU Info format; see near the bottom.
OPTIONS
-h, --help
displays a help message
-l, --list
lists partition layout on all block devices
-m, --machine
displays machine parseable output
-s, --script
never prompts for user intervention
-v, --version
displays the version
-a alignment-type, --align alignment-type
Set alignment for newly created partitions, valid alignment
types are:
none Use the minimum alignment allowed by the disk type.
cylinder
Align partitions to cylinders.
-l, --list
lists partition layout on all block devices
-m, --machine
displays machine parseable output
-s, --script
never prompts for user intervention
-v, --version
displays the version
-a alignment-type, --align alignment-type
Set alignment for newly created partitions, valid alignment
types are:
none Use the minimum alignment allowed by the disk type.
cylinder
Align partitions to cylinders.
minimal
Use minimum alignment as given by the disk topology
information. This and the opt value will use layout
information provided by the disk to align the logical
partition table addresses to actual physical blocks on
the disks. The min value is the minimum aligment needed
to align the partition properly to physical blocks, which
avoids performance degradation.
optimal
Use optimum alignment as given by the disk topology
information. This aligns to a multiple of the physical
block size in a way that guarantees optimal performance.
COMMANDS
[device]
The block device to be used. When none is given, parted will
use the first block device it finds.
[command [options]]
Specifies the command to be executed. If no command is given,
parted will present a command prompt. Possible commands are:
check partition
Do a simple check on partition.
cp [source-device] source dest
Copy the source partition's filesystem on source-device
(or the current device if no other device was specified)
to the dest partition on the current device.
help [command]
Print general help, or help on command if specified.
mkfs partition fs-type
Make a filesystem fs-type on partition. fs-type can be
one of "fat16", "fat32", "ext2", "linux-swap", or "reis‐
erfs".
mklabel label-type
Create a new disklabel (partition table) of label-type.
label-type should be one of "bsd", "dvh", "gpt", "loop",
: mkpart part-type [fs-type] start end
Make a part-type partition with filesystem fs-type (if
specified), beginning at start and ending at end (by
default in megabytes). fs-type can be one of “fat16”,
“fat32”, “ext2”, “HFS”, “linux-swap”, “NTFS”, “reiserfs”,
or “ufs”. part-type should be one of “primary”, “logi‐
cal”, or “extended”.
mkpartfs part-type fs-type start end
Make a part-type partition with filesystem fs-type begin‐
ning at start and ending at end (by default in
megabytes). Using this command is discouraged. Instead
use mkpart to create an empty partition, and then use
external tools like mke2fs(8) to create the filesystem.
move partition start end
Move partition so that it begins at start and ends at
end. Note: move never changes the minor number.
name partition name
Set the name of partition to name. This option works only
on Mac, PC98, and GPT disklabels. The name can be placed
:
print Display the partition table.
quit Exit from parted.
rescue start end
Rescue a lost partition that was located somewhere
between start and end. If a partition is found, parted
will ask if you want to create an entry for it in the
partition table.
resize partition start end
Resize the filesystem on partition so that it begins at
start and ends at end (by default in megabytes).
rm partition
Delete partition.
select device
Choose device as the current device to edit. device
should usually be a Linux hard disk device, but it can be
a partition, software raid device, or an LVM logical vol‐
ume if necessary.
:
set partition flag state
Change the state of the flag on partition to state. Sup‐
ported flags are: “boot”, “root”, “swap”, “hidden”,
“raid”, “lvm”, “lba”, and “palo”. state should be either
"on" or “off”.
unit unit
Set unit as the unit to use when displaying locations and
sizes, and for interpreting those given by the user when
not suffixed with an explicit unit. unit can be one of
"s" (sectors), "B" (bytes), "kB", "MB", "GB", "TB", "%"
(percentage of device size), "cyl" (cylinders), "chs"
(cylinders, heads, sectors), or "compact" (megabytes for
input, and a human-friendly form for output).
version
Display version information and a copyright message.
KNOWN ISSUES
ext3 filesystem functionality does not currently work. To manage ext3
type filesystems use tools like resize2fs(8) or mke2fs(8). Note that
the currently supported ext2 filesystem will be deprecated once ext3
support is finalized. Further note that ext3 support will have limited
functionality that is yet to be defined. Use tools like resize2fs(8)
and mke2fs(8) to manage these types of filesystems.
To manually resize an ext3 filesystem and/or a partition use
resize2fs(8), fdisk(8) or similar tools. For LVM situations, you will
need to use the LVM commands to resize the LVM elements.
REPORTING BUGS
Report bugs to bug-parted@gnu.org
SEE ALSO
fdisk(8), mkfs(8), The parted program is fully documented in the
info(1) format GNU partitioning software manual which is distributed
with the parted-doc Debian package.
AUTHOR
This manual page was written by Timshel Knoll timshel@debian.org, for
the Debian GNU/Linux system (but may be used by others).
parted 2007 March 29 PARTED(8)
(END)
[/code]
http://www.isalo.org/wiki.debian-fr/index.php?title=Le_partitionnement…lol 27 décembre 2010 à 01:10 (CST)
mais j’ai effectivement ,comme nous tous…des trucs à faire…
Salut Terix,
Je te rappelle que tu es sur un forum, pas une hot-line et que nous ne te devons rien. Si tu n’es pas content, il y a des tas de professionels qui te renseigneront moyennant finances.
c’est noté désolé 