Pas de signal sur la sortie VGA

blaisoth · Février 21, 2016, 1:29am

Bonjour,
je voudrais brancher occasionnellement un vidéoprojecteur sur mon portable mais je n’ai jamais d’image. (J’ai essayé en bootant avec le périphérique branché ou non).
Pouvez-vous m’indiquer dans quelle direction chercher ?

pour le PC, lshw :

debian description: Notebook product: K50IJ vendor: ASUSTeK Computer Inc. version: 1.0 serial: A2N0AS47724109B width: 64 bits capabilities: smbios-2.5 dmi-2.5 vsyscall64 vsyscall32 configuration: chassis=notebook uuid=F03081DF-1FF4-7AF8-A100-485B3904BF94 *-core description: Motherboard product: K50IJ vendor: ASUSTeK Computer Inc. physical id: 0 version: 1.0 serial: BSN12345678901234567 slot: MIDDLE *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 217 (12/04/2009) size: 64KiB capacity: 960KiB capabilities: isa pci pnp upgrade shadowing escd cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int17printer int10video acpi usb smartbattery biosbootspecification netboot *-cpu description: CPU product: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Pentium(R) Dual-Core CPU T4400 @ 2.20GHz serial: PSN12345678901234567 slot: Socket 478 size: 2200MHz capacity: 2200MHz width: 64 bits clock: 200MHz capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx x86-64 constant_tsc arch_perfmon pebs bts rep_good aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm xsave lahf_lm cpufreq *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 64KiB capacity: 64KiB capabilities: internal write-back data *-cache:1 description: L2 cache physical id: 7 slot: L2-Cache size: 1MiB capacity: 1MiB capabilities: internal write-back unified *-cache description: L1 cache physical id: 6 slot: L1-Cache size: 64KiB capacity: 64KiB capabilities: internal write-back instruction *-memory description: System Memory physical id: 1d slot: System board or motherboard size: 4GiB *-bank:0 description: SODIMM Synchronous 667 MHz (1.5 ns) product: N/A vendor: N/A physical id: 0 serial: N/A slot: SODIMM0 size: 2GiB width: 64 bits clock: 667MHz (1.5ns) *-bank:1 description: SODIMM Synchronous 667 MHz (1.5 ns) product: N/A vendor: N/A physical id: 1 serial: N/A slot: SODIMM1 size: 2GiB width: 64 bits clock: 667MHz (1.5ns) *-pci description: Host bridge product: Mobile 4 Series Chipset Memory Controller Hub vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel *-display:0 UNCLAIMED description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 09 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 *-usb:0 description: USB Controller product: 82801I (ICH9 Family) USB UHCI Controller #4 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 03 width: 32 bits clock: 33MHz capabilities: uhci bus_master cap_list configuration: driver=uhci_hcd latency=0 module=uhci_hcd *-usbhost product: UHCI Host Controller vendor: Linux 2.6.32-bpo.5-amd64 uhci_hcd physical id: 1 bus info: usb@1 logical name: usb1 version: 2.06 capabilities: usb-1.10 configuration: driver=hub slots=2 speed=12.0MB/s *-usb:1 description: USB Controller product: 82801I (ICH9 Family) USB UHCI Controller #5 vendor: Intel Corporation physical id: 1a.1 bus info: pci@0000:00:1a.1 version: 03 width: 32 bits clock: 33MHz capabilities: uhci bus_master cap_list configuration: driver=uhci_hcd latency=0 module=uhci_hcd *-usbhost product: UHCI Host Controller vendor: Linux 2.6.32-bpo.5-amd64 uhci_hcd physical id: 1 bus info: usb@2 logical name: usb2 version: 2.06 capabilities: usb-1.10 configuration: driver=hub slots=2 speed=12.0MB/s *-usb:2 description: USB Controller product: 82801I (ICH9 Family) USB UHCI Controller #6 vendor: Intel Corporation physical id: 1a.2 bus info: pci@0000:00:1a.2 version: 03 width: 32 bits clock: 33MHz capabilities: uhci bus_master cap_list configuration: driver=uhci_hcd latency=0 module=uhci_hcd *-usbhost product: UHCI Host Controller vendor: Linux 2.6.32-bpo.5-amd64 uhci_hcd physical id: 1 bus info: usb@3 logical name: usb3 version: 2.06 capabilities: usb-1.10 configuration: driver=hub slots=2 speed=12.0MB/s *-usb:3 description: USB Controller product: 82801I (ICH9 Family) USB2 EHCI Controller #2 vendor: Intel Corporation physical id: 1a.7 bus info: pci@0000:00:1a.7 version: 03 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 module=ehci_hcd *-usbhost product: EHCI Host Controller vendor: Linux 2.6.32-bpo.5-amd64 ehci_hcd physical id: 1 bus info: usb@7 logical name: usb7 version: 2.06 capabilities: usb-2.00 configuration: driver=hub slots=6 speed=480.0MB/s *-usb description: Video product: CNF7129 vendor: Chicony Electronics Co., Ltd. physical id: 3 bus info: usb@7:3 version: 15.15 serial: SN0001 capabilities: usb-2.00 configuration: driver=uvcvideo maxpower=500mA speed=480.0MB/s *-multimedia description: Audio device product: 82801I (ICH9 Family) HD Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=HDA Intel latency=0 module=snd_hda_intel *-pci:0 description: PCI bridge product: 82801I (ICH9 Family) PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 03 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport *-pci:1 description: PCI bridge product: 82801I (ICH9 Family) PCI Express Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 03 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport *-network description: Wireless interface product: Atheros Communications Inc. vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 01 serial: 1c:4b:d6:7b:65:5c width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k ip=192.168.1.102 latency=0 module=ath9k multicast=yes wireless=IEEE 802.11bgn *-pci:2 description: PCI bridge product: 82801I (ICH9 Family) PCI Express Port 6 vendor: Intel Corporation physical id: 1c.5 bus info: pci@0000:00:1c.5 version: 03 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport *-network description: Ethernet interface product: L1 Gigabit Ethernet Adapter vendor: Attansic Technology Corp. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: b0 serial: 48:5b:39:04:bf:94 capacity: 1GB/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=ATL1E driverversion=1.0.0.7-NAPI firmware=L1e latency=0 link=no module=atl1e multicast=yes port=twisted pair *-usb:4 description: USB Controller product: 82801I (ICH9 Family) USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 03 width: 32 bits clock: 33MHz capabilities: uhci bus_master cap_list configuration: driver=uhci_hcd latency=0 module=uhci_hcd *-usbhost product: UHCI Host Controller vendor: Linux 2.6.32-bpo.5-amd64 uhci_hcd physical id: 1 bus info: usb@4 logical name: usb4 version: 2.06 capabilities: usb-1.10 configuration: driver=hub slots=2 speed=12.0MB/s *-usb:5 description: USB Controller product: 82801I (ICH9 Family) USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 03 width: 32 bits clock: 33MHz capabilities: uhci bus_master cap_list configuration: driver=uhci_hcd latency=0 module=uhci_hcd *-usbhost product: UHCI Host Controller vendor: Linux 2.6.32-bpo.5-amd64 uhci_hcd physical id: 1 bus info: usb@5 logical name: usb5 version: 2.06 capabilities: usb-1.10 configuration: driver=hub slots=2 speed=12.0MB/s *-usb:6 description: USB Controller product: 82801I (ICH9 Family) USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 03 width: 32 bits clock: 33MHz capabilities: uhci bus_master cap_list configuration: driver=uhci_hcd latency=0 module=uhci_hcd *-usbhost product: UHCI Host Controller vendor: Linux 2.6.32-bpo.5-amd64 uhci_hcd physical id: 1 bus info: usb@6 logical name: usb6 version: 2.06 capabilities: usb-1.10 configuration: driver=hub slots=2 speed=12.0MB/s *-usb:7 description: USB Controller product: 82801I (ICH9 Family) USB2 EHCI Controller #1 vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 03 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 module=ehci_hcd *-usbhost product: EHCI Host Controller vendor: Linux 2.6.32-bpo.5-amd64 ehci_hcd physical id: 1 bus info: usb@8 logical name: usb8 version: 2.06 capabilities: usb-2.00 configuration: driver=hub slots=6 speed=480.0MB/s *-pci:3 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: 93 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: ICH9M LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 03 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: ICH9M/M-E SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi1 version: 03 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 module=ahci *-disk description: ATA Disk product: Hitachi HTS54503 vendor: Hitachi physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: PB3O serial: 100130PBN3001TH7MU1R size: 298GiB (320GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=76692ca8 *-volume:0 description: EXT3 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: b7dc8d46-12ea-40ef-94e8-f14f25506499 size: 3271MiB capacity: 3271MiB capabilities: primary bootable journaled extended_attributes large_files huge_files recover ext3 ext2 initialized configuration: created=2010-04-04 18:15:08 filesystem=ext3 modified=2011-03-23 09:56:47 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,data=ordered mounted=2011-04-08 22:04:06 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 294GiB capacity: 294GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux filesystem partition physical id: 5 logical name: /dev/sda5 logical name: /usr capacity: 4769MiB configuration: mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=ordered state=mounted *-logicalvolume:1 description: Linux filesystem partition physical id: 6 logical name: /dev/sda6 logical name: /var capacity: 2863MiB configuration: mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=ordered state=mounted *-logicalvolume:2 description: Linux swap / Solaris partition physical id: 7 logical name: /dev/sda7 capacity: 11GiB capabilities: nofs *-logicalvolume:3 description: Linux filesystem partition physical id: 8 logical name: /dev/sda8 logical name: /tmp capacity: 384MiB configuration: mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=ordered state=mounted *-logicalvolume:4 description: Linux filesystem partition physical id: 9 logical name: /dev/sda9 logical name: /home capacity: 275GiB configuration: mount.fstype=ext3 mount.options=rw,relatime,errors=continue,data=ordered state=mounted *-cdrom description: DVD-RAM writer product: DVD A DS8A4S vendor: Slimtype physical id: 1 bus info: scsi@1:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/scd0 logical name: /dev/sr0 version: JA22 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-battery description: Other Battery product: F82--22 vendor: AS044Ih43E physical id: 1 version: 00/01/22 serial: <600 slot: In the back capacity: 4200mWh configuration: voltage=11.1V *-network DISABLED description: Ethernet interface physical id: 2 logical name: vboxnet0 serial: 0a:00:27:00:00:00 capabilities: ethernet physical configuration: broadcast=yes multicast=yes

blaisoth · Février 21, 2016, 1:29am

lorsque je branche mon écran HPw2007v il dit “Monito Going to Sleep” et il s’éteint

et quand je débranche : “Check Video Cable”

sebB · Février 21, 2016, 1:29am

Salut,

Peux tu dire quelle carte graphique tu as et la modele de ton video projecteur.
Puisque tu es sous gnome dans systeme/preferences/ecran il apparait pas ton video projecteur?

blaisoth · Février 21, 2016, 1:29am

[quote=“sebB”]Salut,

Peux tu dire quelle carte graphique tu as [/quote]

debian:/home/eric# lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09)

Ca varie car je me déplace et j’utilise le matériel mis à disposition

Dans systeme/preferences/ j’ai pas /ecran …?
J’ai ‘Economiseur d’écran’ ou ‘Résolution de l’écran’
(Et là, je suis chez moi je tente d’afficher sur mon écran externe)

sebB · Février 21, 2016, 1:29am

A priori tu es sous lenny et je sais pas comment est nommé cette entrée sous gnome 2.22.
Dans “Résolution de l’écran” t’as pas le second ecran qui s’affiche?
Branche ton ecran/projecteur et donne la sortie de xrandr
Au fait ca se connecte comment? HDMI…?

blaisoth · Février 21, 2016, 1:30am

debian:/home/eric# xrandr Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768 default connected 1024x768 0.0 800x600 0.0 640x480 0.0
Dans résolution d’écran, je peux juste cocher la case, pas choisir de ‘réglages par défaut’ (cases restent grises)

blaisoth · Février 21, 2016, 1:31am

up

sebB · Février 21, 2016, 1:32am

debian:/home/eric# xrandr Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768 default connected 1024x768 0.0 800x600 0.0 640x480 0.0
Bizarre, a priori t’as qu’une sortie video, ton ecran.

Tu les connecte par quelle prise tes video projecteurs?

blaisoth · Février 21, 2016, 1:32am

[quote=“blaisoth”]lorsque je branche mon écran HPw2007v il dit “Monito Going to Sleep” et il s’éteint[/quote] Ce que j’obtiens quand je le branche à un PC éteint.

sebB · Février 21, 2016, 1:32am

Tu as toujours l’image sur ton portable ou elle s’eteint aussi quand tu branche l’écran?

Essaye

Sinon tu dois avoir sur ton clavier une combinaison de touches qui bascule l’affichage (chez moi Fn + F8)

Tu as installé quel driver pour ta carte graphique?

blaisoth · Février 21, 2016, 1:32am

Mon écran reste allumé, les combinaisons de touches Fn + F… qui marchaient quand il y avait encore seven ne marchent plus que pour la veille (F1) qui s’apparente plus à un coma dépassé d’ailleurs.

Pour la carte graphique :[code]debian:/home/eric# lspci | grep "VGA"
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09)

debian:/home/eric# grep -i ‘/usr/lib/xorg/modules/drivers/’ /var/log/Xorg.0.log
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so[/code]

et
xrandr --output VGA --pos 0x0 --mode 1024x768 --rate 60.00
ne donne pas de sortie (ni 800x600)

sebB · Février 21, 2016, 1:32am

Ca doit venir des drivers non installés pour ta carte.
On va y aller a taton car je ne suis pas un spécialiste des cartes intel.
Installe xserver-xorg-video-intel.

As tu un fichier xorg.conf?
Si oui renomme le en xorg.conf2 afin que xorg se demerde a charger les bons drivers, mais je ne sais pas si sous Lenny ca fonctionne.

Si ca ne fonctionne pas crée un fichier xorg.conf avec driver “intel”

Ensuite reessaye les commandes que je t’ai données et dans Preferences/resolution

blaisoth · Février 21, 2016, 2:44am

Résolu par le passage à squeeze.

Fn+F8 me permet de basculer entre toutes les combinaisons monécran/sortie VGA plus une où le bureau s’étale sur deux écrans.
C’est beau