Bonjour à tous,
voila j’ai quelques soucis avec la carte graphique depuis le passage a Wheezy.
J’ai finalement réussi à installer les cartes en enlevant le xserver-…-nouveau et en installant le xserver-…-nvidia
Seulement, à chaque fois que je redémarre le serveur x le nombre de menus et d’affichage augmente. Je mets un snapshot (desolé c est la premiere fois que je met un snapshot et ca a pas l air de bien marché mais en suivant le lien on peut voir en haut et en bas la multiplication des …)
http://cjoint.com/data3/?3ElrqhFCBSb.htm
Précisions : j’utilise deux ecrans un hdmi et l autre vga
lspci | grep vga :
02:00.0 VGA compatible controller: NVIDIA Corporation C77 [GeForce 8200] (rev a2)
03:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 405] (rev a2)
xorg.conf:
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 304.88 (pbuilder@cake) Wed Apr 3 08:58:25 UTC 2013
Section "ServerLayout"
# Removed Option "Xinerama" "1"
# Removed Option "Xinerama" "0"
Identifier "X.org Configured"
Screen 0 "Screen0" 1920 0
Screen 1 "Screen1" LeftOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
Option "Xinerama" "1"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection
Section "Module"
Load "record"
Load "glx"
Load "extmod"
Load "dri2"
Load "dbe"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-0"
HorizSync 28.0 - 55.0
VertRefresh 43.0 - 72.0
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "LG Electronics W2361"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 61.0
EndSection
Section "Device"
Identifier "Card0"
Driver "nvidia"
BusID "PCI:2:0:0"
EndSection
Section "Device"
Identifier "Card1"
Driver "nvidia"
BusID "PCI:3:0:0"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 405"
BusID "PCI:3:0:0"
EndSection
Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 9200"
BusID "PCI:2:0:0"
EndSection
Section "Screen"
# Removed Option "metamodes" "nvidia-auto-select +0+0"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "CRT-0"
Option "metamodes" "1360x768 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "nvidiaXineramaInfoOrder" "CRT-0"
Option "Stereo" "0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Disable"
EndSection
Et enfin mon xorg.à.log
Avec ca qui se repete plein de fois :
[ 2420.510] (WW) NVIDIA(GPU-1): The EDID for LG Electronics W2361 (DFP-0) contradicts itself:
[ 2420.510] (WW) NVIDIA(GPU-1): mode "1920x1080" is specified in the EDID; however, the
[ 2420.510] (WW) NVIDIA(GPU-1): EDID's valid HorizSync range (30.000-83.000 kHz) would
[ 2420.510] (WW) NVIDIA(GPU-1): exclude this mode's HorizSync (28.1 kHz); ignoring
[ 2420.510] (WW) NVIDIA(GPU-1): HorizSync check for mode "1920x1080".
Merci pour votre aide.
Galibriel