salut !!
j’ai installé debian (netinstall 6.0.3-i386)avec le bureau gnome (v 2.30.3) sur PC futgisu-siemens amilo avec un Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 04), depuis quelque temps. je n’arrive pas a me dépatouiller de la config de mon wifi. En liens copie de lspci et ifconfig . si vous pouvez m’aider merci
lspci.odt (17.6 KB)
ifconfig.odt (16.2 KB)
salut,
peut tu poster les résultats en copié-collé (avec balises code) et non pas en fichiers joints.
j’ai une machine avec la même carte wifi que la tienne (le pilote est ath5k) , donc je devrais pouvoir t’aider.
besoin de plus d’informations:
nm-tool
lsmod
cat /etc/network/interfaces
#rfkill list
(éventuellement faire en connexion filaire #apt-get install rfkill lshw)
salut!! et merci a toi nikoos car je galere vraiment c pas facile de passer de windows a linux mais sa vaut le coup!!
je t’ai mis ce que tu m’ a demander sauf la commande (lshw -C network)qui est introuvable.
root@debian:/home/lilou# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1f:16:0f:1a:05
inet adr:192.168.1.21 Bcast:192.168.1.255 Masque:255.255.255.0
adr inet6: fe80::21f:16ff:fe0f:1a05/64 Scope:Lien
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2594 errors:0 dropped:0 overruns:0 frame:0
TX packets:5540 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:1015207 (991.4 KiB) TX bytes:643287 (628.2 KiB)
Interruption:27 Adresse de base:0xe000
lo Link encap:Boucle locale
inet adr:127.0.0.1 Masque:255.0.0.0
adr inet6: ::1/128 Scope:Hôte
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:10 errors:0 dropped:0 overruns:0 frame:0
TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:0
RX bytes:660 (660.0 B) TX bytes:660 (660.0 B)
wlan0 Link encap:Ethernet HWaddr 00:22:5f:01:e3:3e
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 lg file transmission:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
root@debian:/home/lilou# lspci
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 04)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 04)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 04)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 04)
00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 04)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 04)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 04)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 04)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f4)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 04)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 04)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 01)
08:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 04)
NetworkManager Tool
State: connected
Device: eth0 [Auto eth0] ----------------------------------------------------
Type: Wired
Driver: r8169
State: connected
Default: yes
HW Address: 00:1F:16:0F:1A:05
Capabilities:
Carrier Detect: yes
Speed: 100 Mb/s
Wired Properties
Carrier: on
IPv4 Settings:
Address: 192.168.1.21
Prefix: 24 (255.255.255.0)
Gateway: 192.168.1.254
DNS: 192.168.1.254
Device: wlan0 ----------------------------------------------------------------
Type: 802.11 WiFi
Driver: ath5k
State: disconnected
Default: no
HW Address: 00:22:5F:01:E3:3E
Capabilities:
Wireless Properties
WEP Encryption: yes
WPA Encryption: yes
WPA2 Encryption: yes
Wireless Access Points
voila la suite de ce que tu m’as demande j’espere que tu as ce qui faut! en fait au vue de ce que tu m’as demander il semblerait qu’il ne me manquerai qu’a connecter ou activer la carte??? merci
Et bonne année 
root@debian:/home/lilou# lsmod
Module Size Used by
cpufreq_powersave 602 0
cpufreq_conservative 4018 0
cpufreq_stats 1997 0
cpufreq_userspace 1488 0
parport_pc 15799 0
ppdev 4058 0
lp 5570 0
parport 22554 3 parport_pc,ppdev,lp
sco 5885 2
bridge 33063 0
stp 996 1 bridge
bnep 7468 2
rfcomm 25215 0
l2cap 21721 6 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36335 6 sco,bnep,rfcomm,l2cap
binfmt_misc 4915 1
uinput 4796 1
fuse 44316 1
loop 9777 0
arc4 974 2
ecb 1405 2
snd_hda_codec_realtek 163318 1
ath5k 104106 0
mac80211 123754 1 ath5k
snd_hda_intel 16831 1
joydev 6739 0
ath 6026 1 ath5k
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
i915 223118 2
drm_kms_helper 18577 1 i915
snd_hwdep 4054 1 snd_hda_codec
drm 112040 3 i915,drm_kms_helper
snd_pcm 47226 2 snd_hda_intel,snd_hda_codec
snd_seq 35495 0
snd_timer 12270 2 snd_pcm,snd_seq
i2c_algo_bit 3497 1 i915
snd_seq_device 3673 1 snd_seq
psmouse 44817 0
cfg80211 87797 3 ath5k,mac80211,ath
rfkill 10280 4 bluetooth,cfg80211
serio_raw 2916 0
wmi 3575 0
processor 26343 1
button 3598 1 i915
ac 1640 0
video 14605 1 i915
battery 3782 0
evdev 5609 19
i2c_i801 6462 0
snd 34431 10 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
pcspkr 1207 0
output 1204 1 video
i2c_core 12795 5 i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
led_class 1757 1 ath5k
soundcore 3450 1 snd
snd_page_alloc 5061 2 snd_hda_intel,snd_pcm
ext3 94484 2
jbd 32365 1 ext3
mbcache 3762 1 ext3
sg 19945 0
sr_mod 10770 0
sd_mod 26029 4
crc_t10dif 1012 1 sd_mod
cdrom 26487 1 sr_mod
ata_generic 2247 0
ata_piix 17744 0
uhci_hcd 16073 0
ahci 27418 3
thermal 9206 0
libata 115925 3 ata_generic,ata_piix,ahci
r8169 31365 0
mii 2714 1 r8169
thermal_sys 9378 3 processor,video,thermal
ehci_hcd 28749 0
scsi_mod 104909 4 sg,sr_mod,sd_mod,libata
usbcore 99017 3 uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
root@debian:/home/lilou# cat /etc/network/interfaces
auto lo
iface lo inet loopback
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp
rfkill list : commande introuvable
lorsque tu fais la commande rfkill list il faut que tu sois en root dans le teminal.
(su …mot de passe)
tu as oublié la commande lshw -C network
mais j’ai déjà vu un truc pas bon dans le fichier /etc/network/interfaces
tu fais gksu gedit /etc/network/interfaces
tu ne laisses que ces 2 lignes:
auto lo
iface lo inet loopback
tu supprimes ou commentes celle-ci qui met le bazar avec network-manager:
allow-hotplug eth0
tu redémarres ta machine