problème de connexion internet

Support Debian
#1

Bonjour,
il s’agit d’une installe de debian datant d’il y a deux ans et demie, une squeeze très peu mise à jour depuis plus d’un an et très peu bidouillé par faute de temps (d’ailleurs l’intalle avait été faite un peu à l’arrache lol)

mais bon voila qu’il y a deux jour de cela un petit souci m’oblige a rebooter ma box, une foie cela fait bizarrement plus de connexion alors que la box a l’air de fonctionner impeccable. j’ai deux carte réseau sur cette machine, une intégré et une autre que j’avais récupéré d’une de mes ancienne bécanne, je décide donc d’intervertir la conf des deux interface et de changer mon cable de port … toujours pareil. au passage je test un petit ping … le ping fonctionne correctement ?!

j’ai également peu tester le bon fonctionnement de ma box vu que je poste depuis cette connexion à l’aide de mon portable de secoure (une grande idée d’avoir une machine supplémentaire :slightly_smiling: )

alors je précise que lorsque je dis plus de connexion cela englobe tout les browsers, même un apt-get update mouline dans le vent …

maintenant que le problème est énoncé, place aux diverse commande :slightly_smiling: :

uname -a
Linux warhammer 2.6.30-2-amd64 #1 SMP Mon Dec 7 05:21:45 UTC 2009 x86_64 GNU/Linux

lspci
00:00.0 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP78S [GeForce 8200] LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP78S [GeForce 8200] SMBus (rev a1)
00:01.2 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
00:01.3 Co-processor: nVidia Corporation MCP78S [GeForce 8200] Co-Processor (rev a2)
00:01.4 RAM memory: nVidia Corporation MCP78S [GeForce 8200] Memory Controller (rev a1)
00:02.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:04.0 USB Controller: nVidia Corporation MCP78S [GeForce 8200] OHCI USB 1.1 Controller (rev a1)
00:04.1 USB Controller: nVidia Corporation MCP78S [GeForce 8200] EHCI USB 2.0 Controller (rev a1)
00:06.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] IDE (rev a1)
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:09.0 IDE interface: nVidia Corporation MCP78S [GeForce 8200] SATA Controller (non-AHCI mode) (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP77 Ethernet (rev a2)
00:10.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Express Bridge (rev a1)
00:13.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:14.0 PCI bridge: nVidia Corporation MCP78S [GeForce 8200] PCI Bridge (rev a1)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:09.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
02:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a2)
03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a2)
03:02.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a2)
04:00.0 VGA compatible controller: nVidia Corporation G92 [GeForce 8800 GTS 512] (rev a2)
07:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller

lsusb
Bus 003 Device 004: ID 046d:c71c Logitech, Inc. 
Bus 003 Device 003: ID 046d:c71b Logitech, Inc. 
Bus 003 Device 002: ID 046d:0b06 Logitech, Inc. 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

ifconfig
eth0      Link encap:Ethernet  HWaddr 00:40:f4:c2:43:4c  
          inet adr:82.251.14.152  Bcast:82.251.14.255  Masque:255.255.255.0
          adr inet6: fe80::240:f4ff:fec2:434c/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:30 errors:0 dropped:0 overruns:0 frame:0
          TX packets:54 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000 
          RX bytes:8854 (8.6 KiB)  TX bytes:10526 (10.2 KiB)
          Interruption:16 Adresse de base:0x4c00 

eth2      Link encap:Ethernet  HWaddr 90:e6:ba:3c:40:b6  
          inet adr:192.168.2.51  Bcast:192.168.2.255  Masque:255.255.255.0
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interruption:28 Adresse de base:0xa000 

lo        Link encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:20 errors:0 dropped:0 overruns:0 frame:0
          TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0 
          RX bytes:1064 (1.0 KiB)  TX bytes:1064 (1.0 KiB)

ping www.google.fr
PING www-cctld.l.google.com (209.85.147.94) 56(84) bytes of data.
64 bytes from bru01m01-in-f94.1e100.net (209.85.147.94): icmp_req=1 ttl=55 time=35.3 ms
64 bytes from bru01m01-in-f94.1e100.net (209.85.147.94): icmp_req=2 ttl=55 time=35.1 ms
64 bytes from bru01m01-in-f94.1e100.net (209.85.147.94): icmp_req=3 ttl=55 time=35.4 ms
64 bytes from bru01m01-in-f94.1e100.net (209.85.147.94): icmp_req=4 ttl=55 time=35.7 ms
64 bytes from bru01m01-in-f94.1e100.net (209.85.147.94): icmp_req=5 ttl=55 time=34.7 ms
^C
--- www-cctld.l.google.com ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4005ms
rtt min/avg/max/mdev = 34.700/35.276/35.731/0.400 ms

voilà j’espère que mes explications sont à peu près claire et que je n’ai rien oublié, sinon n’hésitez pas a me demander des précisions
merci

#2 
dmesg /var/log/messages
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.30-2-amd64 (Debian 2.6.30-8squeeze1) (dannf@debian.org) (gcc version 4.3.4 (Debian 4.3.4-5) ) #1 SMP Mon Dec 7 05:21:45 UTC 2009
[    0.000000] Command line: auto BOOT_IMAGE=Linux ro root=801
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000cff90000 (usable)
[    0.000000]  BIOS-e820: 00000000cff90000 - 00000000cffa8000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000cffa8000 - 00000000cffe0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[    0.000000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[    0.000000] DMI present.
[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0x130000 max_arch_pfn = 0x100000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFF0000000 write-back
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 0000000130000000 aka 4864M
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xcff90 max_arch_pfn = 0x100000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000cff90000
[    0.000000] Using GB pages for direct mapping
[    0.000000]  0000000000 - 00c0000000 page 1G
[    0.000000]  00c0000000 - 00cfe00000 page 2M
[    0.000000]  00cfe00000 - 00cff90000 page 4k
[    0.000000] kernel direct mapping tables up to cff90000 @ 10000-13000
[    0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[    0.000000] Using GB pages for direct mapping
[    0.000000]  0100000000 - 0130000000 page 2M
[    0.000000] kernel direct mapping tables up to 130000000 @ 12000-14000
[    0.000000] RAMDISK: 03930000 - 040fe394
[    0.000000] ACPI: RSDP 00000000000fbcd0 00014 (v00 ACPIAM)
[    0.000000] ACPI: RSDT 00000000cff90000 00044 (v01 062909 RSDT1104 20090629 MSFT 00000097)
[    0.000000] ACPI: FACP 00000000cff90200 00084 (v01 062909 FACP1104 20090629 MSFT 00000097)
[    0.000000] ACPI: DSDT 00000000cff90450 0BF72 (v01  A1154 A1154000 00000000 INTL 20060113)
[    0.000000] ACPI: FACS 00000000cffa8000 00040
[    0.000000] ACPI: APIC 00000000cff90390 00080 (v01 062909 APIC1104 20090629 MSFT 00000097)
[    0.000000] ACPI: MCFG 00000000cff90410 0003C (v01 062909 OEMMCFG  20090629 MSFT 00000097)
[    0.000000] ACPI: OEMB 00000000cffa8040 00073 (v01 062909 OEMB1104 20090629 MSFT 00000097)
[    0.000000] ACPI: HPET 00000000cff9c3d0 00038 (v01 062909 OEMHPET0 20090629 MSFT 00000097)
[    0.000000] ACPI: INFO 00000000cffa80c0 00124 (v01 062909 AMDINFO  20090629 MSFT 00000097)
[    0.000000] ACPI: NVHD 00000000cffa81f0 00554 (v01 062909  NVHDCP  20090629 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000cff9c410 0088C (v01 A M I  POWERNOW 00000001 AMD  00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] Scanning NUMA topology in Northbridge 24
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000130000000
[    0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[    0.000000]   NODE_DATA [0000000000013000 - 000000000001afff]
[    0.000000]   bootmap [000000000001b000 -  0000000000040fff] pages 26
[    0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0000200000 - 00007d9b0c]    TEXT DATA BSS ==> [0000200000 - 00007d9b0c]
[    0.000000]   #3 [0003930000 - 00040fe394]          RAMDISK ==> [0003930000 - 00040fe394]
[    0.000000]   #4 [000009fc00 - 0000100000]    BIOS reserved ==> [000009fc00 - 0000100000]
[    0.000000]   #5 [00007da000 - 00007da294]              BRK ==> [00007da000 - 00007da294]
[    0.000000]   #6 [0000010000 - 0000012000]          PGTABLE ==> [0000010000 - 0000012000]
[    0.000000]   #7 [0000012000 - 0000013000]          PGTABLE ==> [0000012000 - 0000013000]
[    0.000000] found SMP MP-table at [ffff8800000ff780] ff780
[    0.000000]  [ffffe20000000000-ffffe200043fffff] PMD -> [ffff880028200000-ffff88002bbfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00130000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009f
[    0.000000]     0: 0x00000100 -> 0x000cff90
[    0.000000]     0: 0x00100000 -> 0x00130000
[    0.000000] On node 0 totalpages: 1048351
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1599 pages reserved
[    0.000000]   DMA zone: 2328 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 833480 pages, LIFO batch:31
[    0.000000]   Normal zone: 2688 pages used for memmap
[    0.000000]   Normal zone: 193920 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x508
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 4, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ14 used by override.
[    0.000000] ACPI: IRQ15 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[    0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] nr_irqs_gsi: 24
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000
[    0.000000] PM: Registered nosave memory: 00000000000e3000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cff90000 - 00000000cffa8000
[    0.000000] PM: Registered nosave memory: 00000000cffa8000 - 00000000cffe0000
[    0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000
[    0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000fff00000
[    0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
[    0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 26 pages at ffff880028022000, static data 76256 bytes
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1029728
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: auto BOOT_IMAGE=Linux ro root=801
[    0.000000] Initializing CPU#0
[    0.000000] Experimental hierarchical RCU implementation.
[    0.000000] Experimental hierarchical RCU init done.
[    0.000000] NR_IRQS:4352 nr_irqs:440
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 3400.419 MHz processor.
[    0.004000] spurious 8259A interrupt: IRQ7.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Checking aperture...
[    0.004000] No AGP bridge found
[    0.004000] Node 0: aperture @ 20000000 size 32 MB
[    0.004000] Aperture pointing to e820 RAM. Ignoring.
[    0.004000] Your BIOS doesn't leave a aperture memory hole
[    0.004000] Please enable the IOMMU option in the BIOS setup
[    0.004000] This costs you 64 MB of RAM
[    0.004000] Mapping aperture over 65536 KB of RAM @ 20000000
[    0.004000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[    0.004000] Memory: 4053812k/4980736k available (2785k kernel code, 787332k absent, 139592k reserved, 1399k data, 560k init)
[    0.004000] hpet clockevent registered
[    0.004000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 6800.82 BogoMIPS (lpj=13601656)
[    0.004000] Security Framework initialized
[    0.004000] SELinux:  Disabled at boot.
[    0.004000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.004000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004000] Mount-cache hash table entries: 256
[    0.004000] Initializing cgroup subsys ns
[    0.004000] Initializing cgroup subsys cpuacct
[    0.004000] Initializing cgroup subsys devices
[    0.004000] Initializing cgroup subsys freezer
[    0.004000] Initializing cgroup subsys net_cls
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[    0.004000] CPU 0/0x0 -> Node 0
[    0.004000] tseg: 0000000000
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.004000] using C1E aware idle routine
[    0.004000] ACPI: Core revision 20090320
[    0.018142] Setting APIC routing to flat
[    0.018649] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.058203] CPU0: AMD Phenom(tm) II X4 965 Processor stepping 02
[    0.060001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 6800.03 BogoMIPS (lpj=13600075)
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[    0.004000] CPU 1/0x1 -> Node 0
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.004000] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[    0.144835] CPU1: AMD Phenom(tm) II X4 965 Processor stepping 02
[    0.145377] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.148062] Booting processor 2 APIC 0x2 ip 0x6000
[    0.004000] Initializing CPU#2
[    0.004000] Calibrating delay using timer specific routine.. 6800.01 BogoMIPS (lpj=13600032)
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[    0.004000] CPU 2/0x2 -> Node 0
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 2
[    0.004000] x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
[    0.240908] CPU2: AMD Phenom(tm) II X4 965 Processor stepping 02
[    0.241448] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[    0.244058] Booting processor 3 APIC 0x3 ip 0x6000
[    0.004000] Initializing CPU#3
[    0.004000] Calibrating delay using timer specific routine.. 6800.02 BogoMIPS (lpj=13600044)
[    0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[    0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[    0.004000] CPU 3/0x3 -> Node 0
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 3
[    0.004000] x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
[    0.336876] CPU3: AMD Phenom(tm) II X4 965 Processor stepping 02
[    0.340090] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[    0.344010] Brought up 4 CPUs
[    0.344059] Total of 4 processors activated (27200.90 BogoMIPS).
[    0.344208] CPU0 attaching sched-domain:
[    0.344210]  domain 0: span 0-3 level MC
[    0.344211]   groups: 0 1 2 3
[    0.344215] CPU1 attaching sched-domain:
[    0.344216]  domain 0: span 0-3 level MC
[    0.344218]   groups: 1 2 3 0
[    0.344221] CPU2 attaching sched-domain:
[    0.344222]  domain 0: span 0-3 level MC
[    0.344223]   groups: 2 3 0 1
[    0.344226] CPU3 attaching sched-domain:
[    0.344227]  domain 0: span 0-3 level MC
[    0.344228]   groups: 3 0 1 2
[    0.344281] net_namespace: 1936 bytes
[    0.344281] Booting paravirtualized kernel on bare hardware
[    0.344281] regulator: core version 0.5
[    0.344281] NET: Registered protocol family 16
[    0.344281] node 0 link 0: io port [1000, ffffff]
[    0.344281] node 0 link 0: io port [1000, 1fff]
[    0.344281] TOM: 00000000d0000000 aka 3328M
[    0.348003] Fam 10h mmconf [e0000000, efffffff]
[    0.348005] node 0 link 0: mmio [e0000000, efffffff] ==> none
[    0.348007] node 0 link 0: mmio [a0000, bffff]
[    0.348008] node 0 link 0: mmio [d0000000, fe0bffff] ==> [d0000000, dfffffff] and [f0000000, fe0bffff]
[    0.348011] TOM2: 0000000130000000 aka 4864M
[    0.348062] bus: [00,07] on node 0 link 0
[    0.348063] bus: 00 index 0 io port: [0, ffff]
[    0.348064] bus: 00 index 1 mmio: [a0000, bffff]
[    0.348066] bus: 00 index 2 mmio: [d0000000, dfffffff]
[    0.348067] bus: 00 index 3 mmio: [f0000000, ffffffff]
[    0.348068] bus: 00 index 4 mmio: [130000000, fcffffffff]
[    0.348080] ACPI: bus type pci registered
[    0.348136] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.348136] PCI: Not using MMCONFIG.
[    0.348136] PCI: Using configuration type 1 for base access
[    0.348185] PCI: Using configuration type 1 for extended access
[    0.348247] bio: create slab <bio-0> at 0
[    0.348600] ACPI: EC: Look up EC in DSDT
[    0.409762] ACPI: Interpreter enabled
[    0.409815] ACPI: (supports S0 S1 S3 S4 S5)
[    0.410043] ACPI: Using IOAPIC for interrupt routing
[    0.410151] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[    0.416399] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[    0.421558] PCI: Using MMCONFIG at e0000000 - efffffff
[    0.436169] ACPI Warning (tbutils-0246): Incorrect checksum in table [OEMB] - 54, should be 53 [20090320]
[    0.436449] ACPI: No dock devices found.
[    0.436827] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.436902] pci 0000:00:01.0: reg 10 io port: [0x900-0x9ff]
[    0.436902] pci 0000:00:01.1: reg 10 io port: [0xe00-0xe3f]
[    0.436902] pci 0000:00:01.1: reg 20 io port: [0x600-0x63f]
[    0.436902] pci 0000:00:01.1: reg 24 io port: [0x700-0x73f]
[    0.436902] pci 0000:00:01.1: PME# supported from D3hot D3cold
[    0.436902] pci 0000:00:01.1: PME# disabled
[    0.436902] pci 0000:00:01.3: reg 10 32bit mmio: [0xf7e80000-0xf7efffff]
[    0.436902] pci 0000:00:02.0: reg 10 32bit mmio: [0xf7e7e000-0xf7e7efff]
[    0.436902] pci 0000:00:02.0: supports D1 D2
[    0.436902] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.436902] pci 0000:00:02.0: PME# disabled
[    0.436902] pci 0000:00:02.1: reg 10 32bit mmio: [0xf7e7fc00-0xf7e7fcff]
[    0.436902] pci 0000:00:02.1: supports D1 D2
[    0.436902] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.436902] pci 0000:00:02.1: PME# disabled
[    0.436902] pci 0000:00:04.0: reg 10 32bit mmio: [0xf7e7d000-0xf7e7dfff]
[    0.436902] pci 0000:00:04.0: supports D1 D2
[    0.436902] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.436930] pci 0000:00:04.0: PME# disabled
[    0.436998] pci 0000:00:04.1: reg 10 32bit mmio: [0xf7e7f800-0xf7e7f8ff]
[    0.437021] pci 0000:00:04.1: supports D1 D2
[    0.437022] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.437077] pci 0000:00:04.1: PME# disabled
[    0.437155] pci 0000:00:06.0: reg 20 io port: [0xffa0-0xffaf]
[    0.437181] pci 0000:00:07.0: reg 10 32bit mmio: [0xf7e78000-0xf7e7bfff]
[    0.437201] pci 0000:00:07.0: PME# supported from D3hot D3cold
[    0.437254] pci 0000:00:07.0: PME# disabled
[    0.437345] pci 0000:00:09.0: reg 10 io port: [0xb080-0xb087]
[    0.437348] pci 0000:00:09.0: reg 14 io port: [0xb000-0xb003]
[    0.437350] pci 0000:00:09.0: reg 18 io port: [0xac00-0xac07]
[    0.437353] pci 0000:00:09.0: reg 1c io port: [0xa880-0xa883]
[    0.437356] pci 0000:00:09.0: reg 20 io port: [0xa800-0xa80f]
[    0.437358] pci 0000:00:09.0: reg 24 32bit mmio: [0xf7e76000-0xf7e77fff]
[    0.437389] pci 0000:00:0a.0: reg 10 32bit mmio: [0xf7e7c000-0xf7e7cfff]
[    0.437392] pci 0000:00:0a.0: reg 14 io port: [0xa480-0xa487]
[    0.437394] pci 0000:00:0a.0: reg 18 32bit mmio: [0xf7e7f400-0xf7e7f4ff]
[    0.437397] pci 0000:00:0a.0: reg 1c 32bit mmio: [0xf7e7f000-0xf7e7f00f]
[    0.437414] pci 0000:00:0a.0: supports D1 D2
[    0.437415] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.437471] pci 0000:00:0a.0: PME# disabled
[    0.437721] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.437780] pci 0000:00:10.0: PME# disabled
[    0.438059] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.438119] pci 0000:00:13.0: PME# disabled
[    0.438395] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.438455] pci 0000:00:14.0: PME# disabled
[    0.438615] pci 0000:01:09.0: reg 10 io port: [0xc800-0xc8ff]
[    0.438620] pci 0000:01:09.0: reg 14 32bit mmio: [0xf7fffc00-0xf7fffcff]
[    0.438647] pci 0000:01:09.0: supports D1 D2
[    0.438649] pci 0000:01:09.0: PME# supported from D1 D2 D3hot D3cold
[    0.438704] pci 0000:01:09.0: PME# disabled
[    0.440023] pci 0000:00:08.0: transparent bridge
[    0.440075] pci 0000:00:08.0: bridge io port: [0xc000-0xcfff]
[    0.440078] pci 0000:00:08.0: bridge 32bit mmio: [0xf7f00000-0xf7ffffff]
[    0.440117] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.440171] pci 0000:02:00.0: PME# disabled
[    0.440262] pci 0000:00:10.0: bridge io port: [0xd000-0xdfff]
[    0.440269] pci 0000:00:10.0: bridge 32bit mmio: [0xf8000000-0xfbefffff]
[    0.440281] pci 0000:00:10.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.440307] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.440361] pci 0000:03:00.0: PME# disabled
[    0.440439] pci 0000:03:02.0: PME# supported from D0 D3hot D3cold
[    0.440493] pci 0000:03:02.0: PME# disabled
[    0.440562] pci 0000:02:00.0: bridge io port: [0xd000-0xdfff]
[    0.440565] pci 0000:02:00.0: bridge 32bit mmio: [0xf8000000-0xfbefffff]
[    0.440568] pci 0000:02:00.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.440593] pci 0000:04:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[    0.440601] pci 0000:04:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
[    0.440609] pci 0000:04:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[    0.440613] pci 0000:04:00.0: reg 24 io port: [0xdc00-0xdc7f]
[    0.440618] pci 0000:04:00.0: reg 30 32bit mmio: [0xfbee0000-0xfbefffff]
[    0.440664] pci 0000:03:00.0: bridge io port: [0xd000-0xdfff]
[    0.440666] pci 0000:03:00.0: bridge 32bit mmio: [0xf8000000-0xfbefffff]
[    0.440670] pci 0000:03:00.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[    0.440806] pci 0000:07:00.0: reg 10 64bit mmio: [0xfbfff800-0xfbffffff]
[    0.440811] pci 0000:07:00.0: reg 18 io port: [0xe800-0xe8ff]
[    0.440847] pci 0000:07:00.0: supports D2
[    0.440849] pci 0000:07:00.0: PME# supported from D2 D3hot D3cold
[    0.440904] pci 0000:07:00.0: PME# disabled
[    0.441001] pci 0000:00:14.0: bridge io port: [0xe000-0xefff]
[    0.441008] pci 0000:00:14.0: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
[    0.441059] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.441283] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[    0.441373] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0._PRT]
[    0.441444] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0.BR20._PRT]
[    0.441555] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0.BR20.BR21._PRT]
[    0.441623] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MXR0.BR20.BR23._PRT]
[    0.441694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR13._PRT]
[    0.441762] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
[    0.460755] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled.
[    0.460852] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
[    0.461415] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[    0.462011] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[    0.462610] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
[    0.464362] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[    0.464958] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[    0.465558] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[    0.466155] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[    0.466751] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[    0.467347] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[    0.467942] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[    0.468526] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *0, disabled.
[    0.469121] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[    0.469718] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[    0.470313] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[    0.470913] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *11
[    0.471477] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[    0.472101] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[    0.472698] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[    0.473297] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *15
[    0.473859] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[    0.474455] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[    0.475051] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[    0.475647] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[    0.476247] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[    0.476843] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[    0.477439] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[    0.478036] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[    0.478632] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[    0.479229] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[    0.479825] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[    0.480397] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
[    0.480993] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
[    0.481592] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
[    0.482189] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
[    0.482788] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *15
[    0.483354] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *11
[    0.483920] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *15
[    0.484495] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *11
[    0.485058] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *0, disabled.
[    0.485660] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[    0.486226] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *7
[    0.486792] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[    0.487404] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[    0.488030] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *10
[    0.488596] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *10
[    0.488933] usbcore: registered new interface driver usbfs
[    0.488933] usbcore: registered new interface driver hub
[    0.488933] usbcore: registered new device driver usb
[    0.488933] PCI: Using ACPI for IRQ routing
[    0.500192] PCI-DMA: Disabling AGP.
[    0.500301] PCI-DMA: aperture base @ 20000000 size 65536 KB
[    0.500301] PCI-DMA: using GART IOMMU.
[    0.500301] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[    0.501664] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[    0.501849] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[    0.516011] Switched to high resolution mode on CPU 0
[    0.517483] Switched to high resolution mode on CPU 1
[    0.517556] Switched to high resolution mode on CPU 2
[    0.518789] Switched to high resolution mode on CPU 3
[    0.532024] pnp: PnP ACPI init
[    0.532088] ACPI: bus type pnp registered
[    0.539082] pnp: PnP ACPI: found 12 devices
[    0.539133] ACPI: ACPI bus type pnp unregistered
[    0.539190] system 00:04: ioport range 0x4d0-0x4d1 has been reserved
[    0.539245] system 00:04: ioport range 0x800-0x80f has been reserved
[    0.539299] system 00:04: ioport range 0x500-0x57f has been reserved
[    0.539352] system 00:04: ioport range 0x580-0x5ff has been reserved
[    0.539406] system 00:04: ioport range 0x800-0x87f could not be reserved
[    0.539461] system 00:04: ioport range 0x880-0x8ff has been reserved
[    0.539515] system 00:04: ioport range 0xd00-0xd7f has been reserved
[    0.539569] system 00:04: ioport range 0xd80-0xdff has been reserved
[    0.539623] system 00:04: iomem range 0xfed04000-0xfed04fff has been reserved
[    0.539678] system 00:04: iomem range 0xfee01000-0xfeefffff has been reserved
[    0.539736] system 00:07: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.539803] system 00:07: iomem range 0xfee00000-0xfee00fff has been reserved
[    0.539859] system 00:08: ioport range 0x230-0x23f has been reserved
[    0.539913] system 00:08: ioport range 0x290-0x29f has been reserved
[    0.539967] system 00:08: ioport range 0xa00-0xa0f has been reserved
[    0.540027] system 00:08: ioport range 0xa10-0xa1f has been reserved
[    0.540082] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved
[    0.540139] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[    0.540193] system 00:0b: iomem range 0xc0000-0xcffff has been reserved
[    0.540247] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[    0.540302] system 00:0b: iomem range 0x100000-0xcfffffff could not be reserved
[    0.540369] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved
[    0.545362] pci 0000:00:08.0: PCI bridge, secondary bus 0000:01
[    0.545416] pci 0000:00:08.0:   IO window: 0xc000-0xcfff
[    0.545469] pci 0000:00:08.0:   MEM window: 0xf7f00000-0xf7ffffff
[    0.545523] pci 0000:00:08.0:   PREFETCH window: disabled
[    0.545577] pci 0000:03:00.0: PCI bridge, secondary bus 0000:04
[    0.545631] pci 0000:03:00.0:   IO window: 0xd000-0xdfff
[    0.545684] pci 0000:03:00.0:   MEM window: 0xf8000000-0xfbefffff
[    0.545739] pci 0000:03:00.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.545808] pci 0000:03:02.0: PCI bridge, secondary bus 0000:05
[    0.545860] pci 0000:03:02.0:   IO window: disabled
[    0.545913] pci 0000:03:02.0:   MEM window: disabled
[    0.545965] pci 0000:03:02.0:   PREFETCH window: disabled
[    0.546019] pci 0000:02:00.0: PCI bridge, secondary bus 0000:03
[    0.546073] pci 0000:02:00.0:   IO window: 0xd000-0xdfff
[    0.546126] pci 0000:02:00.0:   MEM window: 0xf8000000-0xfbefffff
[    0.546181] pci 0000:02:00.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.546250] pci 0000:00:10.0: PCI bridge, secondary bus 0000:02
[    0.546305] pci 0000:00:10.0:   IO window: 0xd000-0xdfff
[    0.546365] pci 0000:00:10.0:   MEM window: 0xf8000000-0xfbefffff
[    0.546423] pci 0000:00:10.0:   PREFETCH window: 0x000000d0000000-0x000000dfffffff
[    0.546500] pci 0000:00:13.0: PCI bridge, secondary bus 0000:06
[    0.546553] pci 0000:00:13.0:   IO window: disabled
[    0.546611] pci 0000:00:13.0:   MEM window: disabled
[    0.546668] pci 0000:00:13.0:   PREFETCH window: disabled
[    0.546730] pci 0000:00:14.0: PCI bridge, secondary bus 0000:07
[    0.546785] pci 0000:00:14.0:   IO window: 0xe000-0xefff
[    0.546845] pci 0000:00:14.0:   MEM window: 0xfbf00000-0xfbffffff
[    0.546903] pci 0000:00:14.0:   PREFETCH window: disabled
[    0.552237] pci 0000:00:08.0: setting latency timer to 64
[    0.552638] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 19
[    0.552692]   alloc irq_desc for 19 on cpu 0 node 0
[    0.552693]   alloc kstat_irqs on cpu 0 node 0
[    0.552700] pci 0000:00:10.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[    0.552773] pci 0000:00:10.0: setting latency timer to 64
[    0.552780] pci 0000:02:00.0: setting latency timer to 64
[    0.552784] pci 0000:03:00.0: setting latency timer to 64
[    0.552788] pci 0000:03:02.0: setting latency timer to 64
[    0.553175] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 18
[    0.553229]   alloc irq_desc for 18 on cpu 0 node 0
[    0.553230]   alloc kstat_irqs on cpu 0 node 0
[    0.553236] pci 0000:00:13.0: PCI INT A -> Link[LN3A] -> GSI 18 (level, low) -> IRQ 18
[    0.553309] pci 0000:00:13.0: setting latency timer to 64
[    0.553697] ACPI: PCI Interrupt Link [LN4A] enabled at IRQ 17
[    0.553750]   alloc irq_desc for 17 on cpu 0 node 0
[    0.553751]   alloc kstat_irqs on cpu 0 node 0
[    0.553757] pci 0000:00:14.0: PCI INT A -> Link[LN4A] -> GSI 17 (level, low) -> IRQ 17
[    0.553830] pci 0000:00:14.0: setting latency timer to 64
[    0.553834] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.553836] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.553838] pci_bus 0000:01: resource 0 io:  [0xc000-0xcfff]
[    0.553840] pci_bus 0000:01: resource 1 mem: [0xf7f00000-0xf7ffffff]
[    0.553842] pci_bus 0000:01: resource 3 io:  [0x00-0xffff]
[    0.553843] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.553845] pci_bus 0000:02: resource 0 io:  [0xd000-0xdfff]
[    0.553846] pci_bus 0000:02: resource 1 mem: [0xf8000000-0xfbefffff]
[    0.553848] pci_bus 0000:02: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.553849] pci_bus 0000:03: resource 0 io:  [0xd000-0xdfff]
[    0.553851] pci_bus 0000:03: resource 1 mem: [0xf8000000-0xfbefffff]
[    0.553852] pci_bus 0000:03: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.553854] pci_bus 0000:04: resource 0 io:  [0xd000-0xdfff]
[    0.553855] pci_bus 0000:04: resource 1 mem: [0xf8000000-0xfbefffff]
[    0.553856] pci_bus 0000:04: resource 2 pref mem [0xd0000000-0xdfffffff]
[    0.553858] pci_bus 0000:07: resource 0 io:  [0xe000-0xefff]
[    0.553860] pci_bus 0000:07: resource 1 mem: [0xfbf00000-0xfbffffff]
[    0.553931] NET: Registered protocol family 2
[    0.640142] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.640951] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    0.643000] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.643351] TCP: Hash tables configured (established 524288 bind 65536)
[    0.643405] TCP reno registered
[    0.656112] NET: Registered protocol family 1
[    0.656198] Trying to unpack rootfs image as initramfs...
[    0.768211] Freeing initrd memory: 7992k freed
[    0.771597] audit: initializing netlink socket (disabled)
[    0.771661] type=2000 audit(1334679950.768:1): initialized
[    0.772012] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.772183] VFS: Disk quotas dquot_6.5.2
[    0.772255] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.772344] msgmni has been set to 7933
[    0.772537] alg: No test for stdrng (krng)
[    0.772632] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.772700] io scheduler noop registered
[    0.772750] io scheduler anticipatory registered
[    0.772800] io scheduler deadline registered
[    0.772865] io scheduler cfq registered (default)
[    0.820152] pci 0000:00:08.0: Enabling HT MSI Mapping
[    0.820298] pci 0000:00:09.0: Enabling HT MSI Mapping
[    0.820447] pci 0000:00:0a.0: Enabling HT MSI Mapping
[    0.820686] pci 0000:04:00.0: Boot video device
[    0.821035]   alloc irq_desc for 24 on cpu 0 node 0
[    0.821037]   alloc kstat_irqs on cpu 0 node 0
[    0.821054] pcieport-driver 0000:00:10.0: irq 24 for MSI/MSI-X
[    0.821091] pcieport-driver 0000:00:10.0: setting latency timer to 64
[    0.821498]   alloc irq_desc for 25 on cpu 0 node 0
[    0.821499]   alloc kstat_irqs on cpu 0 node 0
[    0.821518] pcieport-driver 0000:00:13.0: irq 25 for MSI/MSI-X
[    0.821554] pcieport-driver 0000:00:13.0: setting latency timer to 64
[    0.821964]   alloc irq_desc for 26 on cpu 0 node 0
[    0.821965]   alloc kstat_irqs on cpu 0 node 0
[    0.821980] pcieport-driver 0000:00:14.0: irq 26 for MSI/MSI-X
[    0.822016] pcieport-driver 0000:00:14.0: setting latency timer to 64
[    0.824488] Linux agpgart interface v0.103
[    0.824539] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.824690] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.825029] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.826105] brd: module loaded
[    0.826203] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[    0.826426] PNP: No PS/2 controller found. Probing ports directly.
[    0.826875] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.826932] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.827102] mice: PS/2 mouse device common for all mice
[    0.827222] rtc_cmos 00:06: RTC can wake from S4
[    0.827308] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    0.827410] rtc0: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[    0.827486] cpuidle: using governor ladder
[    0.827536] cpuidle: using governor menu
[    0.827588] No iBFT detected.
[    0.827833] TCP cubic registered
[    0.827926] NET: Registered protocol family 10
[    0.828252] lo: Disabled Privacy Extensions
[    0.828474] Mobile IPv6
[    0.828524] NET: Registered protocol family 17
[    0.828683] registered taskstats version 1
[    0.828891] rtc_cmos 00:06: setting system clock to 2012-04-17 16:25:51 UTC (1334679951)
[    0.828995] Freeing unused kernel memory: 560k freed
[    0.829191] Write protecting the kernel read-only data: 3796k
[    0.858254] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.859487] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 23
[    0.859543]   alloc irq_desc for 23 on cpu 0 node 0
[    0.859545]   alloc kstat_irqs on cpu 0 node 0
[    0.859554] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 23 (level, low) -> IRQ 23
[    0.859645] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    0.859647] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    0.859761] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.859854] ehci_hcd 0000:00:02.1: debug port 1
[    0.859907] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    0.859923] ehci_hcd 0000:00:02.1: irq 23, io mem 0xf7e7fc00
[    0.868601] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.868672] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.868726] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.868793] usb usb1: Product: EHCI Host Controller
[    0.868845] usb usb1: Manufacturer: Linux 2.6.30-2-amd64 ehci_hcd
[    0.868898] usb usb1: SerialNumber: 0000:00:02.1
[    0.868986] usb usb1: configuration #1 chosen from 1 choice
[    0.869055] hub 1-0:1.0: USB hub found
[    0.869110] hub 1-0:1.0: 6 ports detected
[    0.869561] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    0.870025] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 22
[    0.870079]   alloc irq_desc for 22 on cpu 0 node 0
[    0.870081]   alloc kstat_irqs on cpu 0 node 0
[    0.870089] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 22 (level, low) -> IRQ 22
[    0.870159] forcedeth 0000:00:0a.0: setting latency timer to 64
[    0.872214] SCSI subsystem initialized
[    0.876758] Uniform Multi-Platform E-IDE driver
[    0.885767] 8139too Fast Ethernet driver 0.9.28
[    0.886236] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 16
[    0.886291]   alloc irq_desc for 16 on cpu 0 node 0
[    0.886292]   alloc kstat_irqs on cpu 0 node 0
[    0.886300] 8139too 0000:01:09.0: PCI INT A -> Link[LNKB] -> GSI 16 (level, low) -> IRQ 16
[    0.887014] eth0: RealTek RTL8139 at 0xffffc20000664c00, 00:40:f4:c2:43:4c, IRQ 16
[    0.887082] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[    0.889110] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    0.889298] firewire_ohci 0000:07:00.0: PCI INT A -> Link[LN4A] -> GSI 17 (level, low) -> IRQ 17
[    0.889369] firewire_ohci 0000:07:00.0: setting latency timer to 64
[    0.889428] libata version 3.00 loaded.
[    0.933126] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x732 @ 3, addr 90:e6:ba:3c:40:b6
[    0.933196] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt gbit lnktim msi desc-v3
[    0.933759] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 21
[    0.933813]   alloc irq_desc for 21 on cpu 0 node 0
[    0.933814]   alloc kstat_irqs on cpu 0 node 0
[    0.933820] ehci_hcd 0000:00:04.1: PCI INT B -> Link[UB12] -> GSI 21 (level, low) -> IRQ 21
[    0.933903] ehci_hcd 0000:00:04.1: setting latency timer to 64
[    0.933905] ehci_hcd 0000:00:04.1: EHCI Host Controller
[    0.933998] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 2
[    0.934083] ehci_hcd 0000:00:04.1: debug port 1
[    0.934136] ehci_hcd 0000:00:04.1: cache line size of 64 is not supported
[    0.934150] ehci_hcd 0000:00:04.1: irq 21, io mem 0xf7e7f800
[    0.944014] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[    0.944085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.944139] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.944206] usb usb2: Product: EHCI Host Controller
[    0.944257] usb usb2: Manufacturer: Linux 2.6.30-2-amd64 ehci_hcd
[    0.944310] usb usb2: SerialNumber: 0000:00:04.1
[    0.944392] usb usb2: configuration #1 chosen from 1 choice
[    0.944459] hub 2-0:1.0: USB hub found
[    0.944512] hub 2-0:1.0: 6 ports detected
[    0.945419] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.945631] amd74xx 0000:00:06.0: UDMA133 controller
[    0.945683] amd74xx 0000:00:06.0: IDE controller (0x10de:0x0759 rev 0xa1)
[    0.945744] amd74xx 0000:00:06.0: IDE port disabled
[    0.945799] amd74xx 0000:00:06.0: BIOS didn't set cable bits correctly. Enabling workaround.
[    0.945869] amd74xx 0000:00:06.0: not 100% native mode: will probe irqs later
[    0.945925]     ide0: BM-DMA at 0xffa0-0xffa7
[    0.945978] Probing IDE interface ide0...
[    0.968030] firewire_ohci: Added fw-ohci device 0000:07:00.0, OHCI version 1.10
[    1.232113] hda: ST3320620A, ATA DISK drive
[    1.468043] firewire_core: created device fw0: GUID 001e8c0000aefb46, S400
[    2.072016] hdb: _NEC DVD_RW ND-3500AG, ATAPI CD/DVD-ROM drive
[    2.072154] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    2.072313] hda: UDMA/100 mode selected
[    2.072567] hdb: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[    2.073530] hdb: UDMA/33 mode selected
[    2.075727] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[    2.089858] ahci 0000:00:09.0: version 3.0
[    2.090252] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 20
[    2.090306]   alloc irq_desc for 20 on cpu 0 node 0
[    2.090307]   alloc kstat_irqs on cpu 0 node 0
[    2.090314] ahci 0000:00:09.0: PCI INT A -> Link[LSA0] -> GSI 20 (level, low) -> IRQ 20
[    2.090416]   alloc irq_desc for 27 on cpu 0 node 0
[    2.090417]   alloc kstat_irqs on cpu 0 node 0
[    2.090421] ahci 0000:00:09.0: irq 27 for MSI/MSI-X
[    2.090464] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[    2.090533] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pmp pio 
[    2.090587] ahci 0000:00:09.0: setting latency timer to 64
[    2.090812] scsi0 : ahci
[    2.090960] scsi1 : ahci
[    2.091054] scsi2 : ahci
[    2.091146] scsi3 : ahci
[    2.091236] scsi4 : ahci
[    2.091329] scsi5 : ahci
[    2.091443] ata1: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76100 irq 27
[    2.091510] ata2: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76180 irq 27
[    2.091577] ata3: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76200 irq 27
[    2.091644] ata4: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76280 irq 27
[    2.091711] ata5: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76300 irq 27
[    2.091778] ata6: SATA max UDMA/133 abar m8192@0xf7e76000 port 0xf7e76380 irq 27
[    2.092368] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[    2.092422] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23
[    2.092499] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    2.092504] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    2.092588] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 3
[    2.092663] ohci_hcd 0000:00:02.0: irq 23, io mem 0xf7e7e000
[    2.150011] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    2.150067] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.150133] usb usb3: Product: OHCI Host Controller
[    2.150185] usb usb3: Manufacturer: Linux 2.6.30-2-amd64 ohci_hcd
[    2.150238] usb usb3: SerialNumber: 0000:00:02.0
[    2.150321] usb usb3: configuration #1 chosen from 1 choice
[    2.150389] hub 3-0:1.0: USB hub found
[    2.150443] hub 3-0:1.0: 6 ports detected
[    2.150958] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 22
[    2.156280] ohci_hcd 0000:00:04.0: PCI INT A -> Link[UB11] -> GSI 22 (level, low) -> IRQ 22
[    2.156357] ohci_hcd 0000:00:04.0: setting latency timer to 64
[    2.156359] ohci_hcd 0000:00:04.0: OHCI Host Controller
[    2.156438] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 4
[    2.156521] ohci_hcd 0000:00:04.0: irq 22, io mem 0xf7e7d000
[    2.214010] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    2.214065] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.214132] usb usb4: Product: OHCI Host Controller
[    2.214183] usb usb4: Manufacturer: Linux 2.6.30-2-amd64 ohci_hcd
[    2.214236] usb usb4: SerialNumber: 0000:00:04.0
[    2.214317] usb usb4: configuration #1 chosen from 1 choice
[    2.214384] hub 4-0:1.0: USB hub found
[    2.214438] hub 4-0:1.0: 6 ports detected
[    2.416525] ata6: SATA link down (SStatus 0 SControl 300)
[    2.416592] ata4: SATA link down (SStatus 0 SControl 300)
[    2.524017] usb 3-1: new full speed USB device using ohci_hcd and address 2
[    2.572019] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.572023] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.572134] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.573031] ata1.00: ATA-8: ST3250318AS, CC38, max UDMA/133
[    2.573085] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.574331] ata1.00: configured for UDMA/133
[    2.574448] scsi 0:0:0:0: Direct-Access     ATA      ST3250318AS      CC38 PQ: 0 ANSI: 5
[    2.580021] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.600806] ata2.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[    2.600860] ata2.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.600933] ata3.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[    2.600986] ata3.00: 2930277168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.608721] ata5.00: ATA-8: ST31500341AS, CC1H, max UDMA/133
[    2.608774] ata5.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[    2.642803] ata2.00: configured for UDMA/133
[    2.642909] scsi 1:0:0:0: Direct-Access     ATA      ST31500341AS     CC1H PQ: 0 ANSI: 5
[    2.642949] ata3.00: configured for UDMA/133
[    2.643123] scsi 2:0:0:0: Direct-Access     ATA      ST31500341AS     CC1H PQ: 0 ANSI: 5
[    2.650746] ata5.00: configured for UDMA/133
[    2.650846] scsi 4:0:0:0: Direct-Access     ATA      ST31500341AS     CC1H PQ: 0 ANSI: 5
[    2.654075] ide-gd driver 1.18
[    2.654140] hda: max request size: 512KiB
[    2.656422] ide-cd driver 5.00
[    2.697898] hda: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63
[    2.722304] hda: cache flushes supported
[    2.722381]  hda: hda1 hda2 hda3 <<6>usb 3-1: New USB device found, idVendor=046d, idProduct=0b06
[    2.746061] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.746116] usb 3-1: Product: Logitech BT Mini-Receiver
[    2.746168] usb 3-1: Manufacturer: Logitech
[    2.746250] usb 3-1: configuration #1 chosen from 1 choice
[    2.748982] hub 3-1:1.0: USB hub found
[    2.751960] hub 3-1:1.0: 3 ports detected
[    2.754712] Driver 'sd' needs updating - please use bus_type methods
[    2.754819] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    2.754894] sd 0:0:0:0: [sda] Write Protect is off
[    2.754945] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.754955] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.755026] sd 1:0:0:0: [sdb] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB)
[    2.755070]  sda:<5>sd 2:0:0:0: [sdc] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB)
[    2.755099] sd 2:0:0:0: [sdc] Write Protect is off
[    2.755100] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    2.755109] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.755143]  sdc:<5>sd 4:0:0:0: [sdd] 2930277168 512-byte hardware sectors: (1.50 TB/1.36 TiB)
[    2.755166] sd 4:0:0:0: [sdd] Write Protect is off
[    2.755168] sd 4:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[    2.755176] sd 4:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.755211]  sdd:<5>sd 1:0:0:0: [sdb] Write Protect is off
[    2.755568] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    2.755578] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.755690]  sdb: hda5 >
[    2.765523] ide-cd: hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[    2.765773] Uniform CD-ROM driver Revision: 3.20
[    2.769895]  unknown partition table
[    2.769999] sd 4:0:0:0: [sdd] Attached SCSI disk
[    2.771624]  sdc1 sdc2
[    2.771817] sd 2:0:0:0: [sdc] Attached SCSI disk
[    2.772881]  sda1 sda2 sda3 < sdb1
[    2.773681] sd 1:0:0:0: [sdb] Attached SCSI disk
[    2.792499]  sda5 >
[    2.792715] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.054926] usb 3-1.2: new full speed USB device using ohci_hcd and address 3
[    3.178910] usb 3-1.2: New USB device found, idVendor=046d, idProduct=c71b
[    3.178966] usb 3-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.179032] usb 3-1.2: Product: Logitech BT Mini-Receiver
[    3.179085] usb 3-1.2: Manufacturer: Logitech
[    3.179135] usb 3-1.2: SerialNumber: 001F2009545D
[    3.179232] usb 3-1.2: configuration #1 chosen from 1 choice
[    3.189033] usbcore: registered new interface driver hiddev
[    3.197036] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.2/3-1.2:1.0/input/input1
[    3.197129] generic-usb 0003:046D:C71B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:02.0-1.2/input0
[    3.197211] usbcore: registered new interface driver usbhid
[    3.197263] usbhid: v2.6:USB HID core driver
[    3.262900] usb 3-1.3: new full speed USB device using ohci_hcd and address 4
[    3.386885] usb 3-1.3: New USB device found, idVendor=046d, idProduct=c71c
[    3.386941] usb 3-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    3.387007] usb 3-1.3: Product: Logitech BT Mini-Receiver
[    3.387060] usb 3-1.3: Manufacturer: Logitech
[    3.387110] usb 3-1.3: SerialNumber: 001F2009545D
[    3.387193] usb 3-1.3: configuration #1 chosen from 1 choice
[    3.406143] input: Logitech Logitech BT Mini-Receiver as /devices/pci0000:00/0000:00:02.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input2
[    3.406258] generic-usb 0003:046D:C71C.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:02.0-1.3/input0
[    4.830717] PM: Starting manual resume from disk
[    4.834771] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[    4.835248] SGI XFS Quota Management subsystem
[    4.846081] XFS mounting filesystem sda1
[    4.995873] Ending clean XFS mount for filesystem: sda1
[    7.465815] udev[819]: starting version 164
[    8.013231] udev[880]: renamed network interface eth1 to eth2
[    8.307050] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    8.307123] ACPI: Power Button [PWRF]
[    8.307229] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[    8.307298] ACPI: Power Button [PWRB]
[    8.317556] processor ACPI_CPU:00: registered as cooling_device0
[    8.317630] processor ACPI_CPU:01: registered as cooling_device1
[    8.317701] processor ACPI_CPU:02: registered as cooling_device2
[    8.317771] processor ACPI_CPU:03: registered as cooling_device3
[    8.729322] ACPI: WMI: Mapper loaded
[    8.745544] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    8.812565] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    8.828472] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    9.201483] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x600
[    9.201547] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x700
[    9.996821] nvidia: module license 'NVIDIA' taints kernel.
[    9.996878] Disabling lock debugging due to kernel taint
[   10.249515] nvidia 0000:04:00.0: PCI INT A -> Link[LN0A] -> GSI 19 (level, low) -> IRQ 19
[   10.249591] nvidia 0000:04:00.0: setting latency timer to 64
[   10.249965] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  270.41.19  Mon May 16 23:32:08 PDT 2011
[   10.641746] HDA Intel 0000:00:07.0: power state changed by ACPI to D0
[   10.642140] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
[   10.642194] HDA Intel 0000:00:07.0: PCI INT A -> Link[LAZA] -> GSI 21 (level, low) -> IRQ 21
[   10.642305] HDA Intel 0000:00:07.0: setting latency timer to 64
[   11.232016] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   11.264059] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:07.0/input/input6
[   12.324690] Adding 3036244k swap on /dev/sda5.  Priority:-1 extents:1 across:3036244k 
[   12.639635] loop: module loaded
[   17.086431] kjournald starting.  Commit interval 5 seconds
[   17.086563] EXT3 FS on hda1, internal journal
[   17.086649] EXT3-fs: mounted filesystem with ordered data mode.
[   17.107231] kjournald starting.  Commit interval 5 seconds
[   17.107358] EXT3 FS on hda2, internal journal
[   17.107444] EXT3-fs: mounted filesystem with ordered data mode.
[   17.128736] XFS mounting filesystem sdb1
[   17.286616] Ending clean XFS mount for filesystem: sdb1
[   18.752124] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.821540]   alloc irq_desc for 28 on cpu 0 node 0
[   18.821542]   alloc kstat_irqs on cpu 0 node 0
[   18.821549] forcedeth 0000:00:0a.0: irq 28 for MSI/MSI-X
[   18.821737] eth2: no link during initialization.
[   18.822498] ADDRCONF(NETDEV_UP): eth2: link is not ready
[   18.848871] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[   18.849043] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[   18.849110] nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
[   18.849177] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[   19.536914] fuse init (API version 7.11)
[   21.757179] powernow-k8: Found 1 AMD Phenom(tm) II X4 965 Processor processors (4 cpu cores) (version 2.20.00)
[   21.757216] powernow-k8:    0 : pstate 0 (3400 MHz)
[   21.757218] powernow-k8:    1 : pstate 1 (2700 MHz)
[   21.757220] powernow-k8:    2 : pstate 2 (2200 MHz)
[   21.757221] powernow-k8:    3 : pstate 3 (800 MHz)
[   25.189927] Bluetooth: Core ver 2.15
[   25.190469] NET: Registered protocol family 31
[   25.190528] Bluetooth: HCI device and connection manager initialized
[   25.190590] Bluetooth: HCI socket layer initialized
[   25.199345] Bluetooth: L2CAP ver 2.13
[   25.199405] Bluetooth: L2CAP socket layer initialized
[   25.246961] Bluetooth: RFCOMM socket layer initialized
[   25.247017] Bluetooth: RFCOMM TTY layer initialized
[   25.247068] Bluetooth: RFCOMM ver 1.11
[   25.288411] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.288464] Bluetooth: BNEP filters: protocol multicast
[   25.372787] Bridge firewalling registered
[   25.475451] Bluetooth: SCO (Voice Link) ver 0.6
[   25.475514] Bluetooth: SCO socket layer initialized
[   25.836537] lp: driver loaded but no devices found
[   25.876743] ppdev: user-space parallel port driver
[   26.584974] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[   37.153509] eth0: no IPv6 routers present
[  391.024761] Inbound IN=eth0 OUT= MAC=00:40:f4:c2:43:4c:00:07:cb:0a:ae:bd:08:00 SRC=82.229.223.213 DST=82.251.14.152 LEN=48 TOS=0x00 PREC=0x00 TTL=120 ID=6161 DF PROTO=TCP SPT=4052 DPT=445 WINDOW=64240 RES=0x00 SYN URGP=0 
[  393.976650] Inbound IN=eth0 OUT= MAC=00:40:f4:c2:43:4c:00:07:cb:0a:ae:bd:08:00 SRC=82.229.223.213 DST=82.251.14.152 LEN=48 TOS=0x00 PREC=0x00 TTL=120 ID=7046 DF PROTO=TCP SPT=4052 DPT=445 WINDOW=64240 RES=0x00 SYN URGP=0

pardon j’ai du couper mon message d’origine en deux car trop long a cause des commandes

#3

peut être désactiver une des deux cartes et configurer la carte restante dans le fichier interfaces?

#4

Bonjour Marcastro :slightly_smiling:
j’ai executé la commande suivante :

#ifconfig eth2 down

la carte intégré est donc maintenant désactivé, mais cela n’a rien changé a mon souci :frowning:

au passage, j’en profite pour poster une copie du fichier interfaces :

# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp

#The secondary network interface
allow-hotplug eth2
iface eth2 inet static
	address 192.168.2.51
	netmask	255.255.255.0
#5

Si le ping par nom de domaine répond, c’est que la connexion internet fonctionne (réseau et résolution de nom). A priori c’est seulement le web (HTTP) qui ne fonctionne pas.
Il y a des messages d’erreur ?
Que donne l’accès HTTP par adresse IP ?
Que donne l’accès à un serveur sécurisé en HTTPS ?
Que donne un tcptraceroute vers un site web ?
Il y a des règles iptables ?

#6

Bonjour PascalHambourg :slightly_smiling:

j’ai lancé iceweasel depuis un terminal, et je constate que non, aucun message, juste du moulinage intensif.

même chose moulinage en boucle.

je suis désolé, je n’ai pas pu tester, car je n’ai pas d’adresse https de test en tête, si tu peux m’en donner une je la testerais aussi sec :wink:

ça :

tcptraceroute www.google.fr
Selected device eth0, address 82.251.14.152, port 35966 for outgoing packets
Tracing the path to www.google.fr (209.85.147.94) on TCP port 80 (www), 30 hops max
 1  * * *
 2  * * *
 3  * * *
 4  * * *
 5  * * *
 6  * * *
 7  * * *
 8  * * *
 9  * * *
10  * * *
11  * * *
12  * * *
13  * * *
14  * * *
15  * * *
16  * * *
17  * * *
18  * * *
19  * * *
20  * * *
21  * * *
22  * * *
23  * * *
24  * * *
25  * * *
26  * * *
27  * * *
28  * * *
29  * * *
30  * * *
Destination not reached

:frowning:

effectivement, il y a des rêgles qui ont été ajouté a l’aide de firestarter :
un blocage de toute les connexion sortante sur les ports 27950, 27650, 28004 et 27666, ce sont les port utilisé par quake 4 et doom3 pour le vérification de la validité des clé cd ( :whistle: ), je les utilise depuis plus de trois ans ces rêgles là.

je poste malgré tout le listing de toute les rêgles de iptable :

iptables -L
Chain INPUT (policy DROP)
target     prot opt source               destination         
ACCEPT     tcp  --  dns1.proxad.net      anywhere            tcp flags:!FIN,SYN,RST,ACK/SYN 
ACCEPT     udp  --  dns1.proxad.net      anywhere            
ACCEPT     tcp  --  dns2.proxad.net      anywhere            tcp flags:!FIN,SYN,RST,ACK/SYN 
ACCEPT     udp  --  dns2.proxad.net      anywhere            
ACCEPT     all  --  anywhere             anywhere            
ACCEPT     icmp --  anywhere             anywhere            limit: avg 10/sec burst 5 
DROP       all  --  anywhere             255.255.255.255     
DROP       all  --  anywhere             lns-bzn-36-82-251-14-255-illegal.adsl.proxad.net 
DROP       all  --  base-address.mcast.net/8  anywhere            
DROP       all  --  anywhere             base-address.mcast.net/8 
DROP       all  --  255.255.255.255      anywhere            
DROP       all  --  anywhere             default             
DROP       all  --  anywhere             anywhere            state INVALID 
LSI        all  -f  anywhere             anywhere            limit: avg 10/min burst 5 
INBOUND    all  --  anywhere             anywhere            
INBOUND    all  --  anywhere             192.168.2.51        
INBOUND    all  --  anywhere             lns-bzn-36-82-251-14-152.adsl.proxad.net 
INBOUND    all  --  anywhere             192.168.2.255       
LOG_FILTER  all  --  anywhere             anywhere            
LOG        all  --  anywhere             anywhere            LOG level info prefix `Unknown Input' 

Chain FORWARD (policy DROP)
target     prot opt source               destination         
ACCEPT     icmp --  anywhere             anywhere            limit: avg 10/sec burst 5 
TCPMSS     tcp  --  anywhere             anywhere            tcp flags:SYN,RST/SYN TCPMSS clamp to PMTU 
OUTBOUND   all  --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             192.168.2.0/24      state RELATED,ESTABLISHED 
ACCEPT     udp  --  anywhere             192.168.2.0/24      state RELATED,ESTABLISHED 
LOG_FILTER  all  --  anywhere             anywhere            
LOG        all  --  anywhere             anywhere            LOG level info prefix `Unknown Forward' 

Chain OUTPUT (policy DROP)
target     prot opt source               destination         
ACCEPT     tcp  --  lns-bzn-36-82-251-14-152.adsl.proxad.net  dns1.proxad.net     tcp dpt:domain 
ACCEPT     udp  --  lns-bzn-36-82-251-14-152.adsl.proxad.net  dns1.proxad.net     udp dpt:domain 
ACCEPT     tcp  --  lns-bzn-36-82-251-14-152.adsl.proxad.net  dns2.proxad.net     tcp dpt:domain 
ACCEPT     udp  --  lns-bzn-36-82-251-14-152.adsl.proxad.net  dns2.proxad.net     udp dpt:domain 
ACCEPT     all  --  anywhere             anywhere            
DROP       all  --  base-address.mcast.net/8  anywhere            
DROP       all  --  anywhere             base-address.mcast.net/8 
DROP       all  --  255.255.255.255      anywhere            
DROP       all  --  anywhere             default             
DROP       all  --  anywhere             anywhere            state INVALID 
OUTBOUND   all  --  anywhere             anywhere            
OUTBOUND   all  --  anywhere             anywhere            
LOG_FILTER  all  --  anywhere             anywhere            
LOG        all  --  anywhere             anywhere            LOG level info prefix `Unknown Output' 

Chain INBOUND (4 references)
target     prot opt source               destination         
ACCEPT     tcp  --  anywhere             anywhere            state RELATED,ESTABLISHED 
ACCEPT     udp  --  anywhere             anywhere            state RELATED,ESTABLISHED 
LSI        all  --  anywhere             anywhere            

Chain LOG_FILTER (5 references)
target     prot opt source               destination         

Chain LSI (2 references)
target     prot opt source               destination         
LOG_FILTER  all  --  anywhere             anywhere            
LOG        tcp  --  anywhere             anywhere            tcp flags:FIN,SYN,RST,ACK/SYN limit: avg 1/sec burst 5 LOG level info prefix `Inbound ' 
DROP       tcp  --  anywhere             anywhere            tcp flags:FIN,SYN,RST,ACK/SYN 
LOG        tcp  --  anywhere             anywhere            tcp flags:FIN,SYN,RST,ACK/RST limit: avg 1/sec burst 5 LOG level info prefix `Inbound ' 
DROP       tcp  --  anywhere             anywhere            tcp flags:FIN,SYN,RST,ACK/RST 
LOG        icmp --  anywhere             anywhere            icmp echo-request limit: avg 1/sec burst 5 LOG level info prefix `Inbound ' 
DROP       icmp --  anywhere             anywhere            icmp echo-request 
LOG        all  --  anywhere             anywhere            limit: avg 5/sec burst 5 LOG level info prefix `Inbound ' 
DROP       all  --  anywhere             anywhere            

Chain LSO (8 references)
target     prot opt source               destination         
LOG_FILTER  all  --  anywhere             anywhere            
LOG        all  --  anywhere             anywhere            limit: avg 5/sec burst 5 LOG level info prefix `Outbound ' 
REJECT     all  --  anywhere             anywhere            reject-with icmp-port-unreachable 

Chain OUTBOUND (3 references)
target     prot opt source               destination         
ACCEPT     icmp --  anywhere             anywhere            
ACCEPT     tcp  --  anywhere             anywhere            state RELATED,ESTABLISHED 
ACCEPT     udp  --  anywhere             anywhere            state RELATED,ESTABLISHED 
LSO        tcp  --  anywhere             anywhere            tcp dpt:27950 
LSO        udp  --  anywhere             anywhere            udp dpt:27950 
LSO        tcp  --  anywhere             anywhere            tcp dpt:27650 
LSO        udp  --  anywhere             anywhere            udp dpt:27650 
LSO        tcp  --  anywhere             anywhere            tcp dpt:28004 
LSO        udp  --  anywhere             anywhere            udp dpt:28004 
LSO        tcp  --  anywhere             anywhere            tcp dpt:27666 
LSO        udp  --  anywhere             anywhere            udp dpt:27666 
ACCEPT     all  --  anywhere             anywhere
#7

Le site de Google répond aussi en HTTPS (google.fr/).
En complément, tu peux aussi refaire le tcptraceroute avec le port 443, ou n’importe quel autre port non bloqué par tes règles iptables en sortie.

A propos des règles, la sortie d’iptables-save serait netterment plus lisible. Mais si tu n’as rien modifié, ça ne vient probablement pas de là.

#8

Bonjour PascalHambourg :slightly_smiling:

désolé, je n’aie pas pu répondre dans la journée, je n’avais pas accès a ma bécane défaillante ^^

alors pour l’accès via une connexion https (j’aurais du y penser que google laissait trainer ce genre de chose :wink: ), et bien ça mouline également.

j’ai refait un traceroute en utilisant le port 443 :

tcptraceroute www.google.fr -p 443
Selected device eth0, address 82.248.30.98, port 443 for outgoing packets
Tracing the path to www.google.fr (173.194.67.94) on TCP port 80 (www), 30 hops max
 1  * * *
 2  * * *
 3  * * *
 4  * * *
 5  * * *
 6  * * *
 7  * * *
 8  * * *
 9  * * *
10  * * *
11  * * *
12  * * *
13  * * *
14  * * *
15  * * *
16  * * *
17  * * *
18  * * *
19  * * *
20  * * *
21  * * *
22  * * *
23  * * *
24  * * *
25  * * *
26  * * *
27  * * *
28  * * *
29  * * *
30  * * *
Destination not reached

et je t’ai préparé une sortie de iptables-save même si tu pressens que le souci ne viens pas de là :

iptables-save -L
iptables-save: invalid option -- 'L'
# Generated by iptables-save v1.4.8 on Wed Apr 18 17:50:04 2012
*nat
:PREROUTING ACCEPT [2:128]
:POSTROUTING ACCEPT [0:0]
:OUTPUT ACCEPT [47:5689]
-A POSTROUTING -o eth0 -j MASQUERADE 
COMMIT
# Completed on Wed Apr 18 17:50:04 2012
# Generated by iptables-save v1.4.8 on Wed Apr 18 17:50:04 2012
*mangle
:PREROUTING ACCEPT [60:9059]
:INPUT ACCEPT [60:9059]
:FORWARD ACCEPT [0:0]
:OUTPUT ACCEPT [176:11100]
:POSTROUTING ACCEPT [171:9946]
COMMIT
# Completed on Wed Apr 18 17:50:04 2012
# Generated by iptables-save v1.4.8 on Wed Apr 18 17:50:04 2012
*filter
:INPUT DROP [0:0]
:FORWARD DROP [0:0]
:OUTPUT DROP [0:0]
:INBOUND - [0:0]
:LOG_FILTER - [0:0]
:LSI - [0:0]
:LSO - [0:0]
:OUTBOUND - [0:0]
-A INPUT -s 212.27.40.241/32 -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -j ACCEPT 
-A INPUT -s 212.27.40.241/32 -p udp -j ACCEPT 
-A INPUT -s 212.27.40.240/32 -p tcp -m tcp ! --tcp-flags FIN,SYN,RST,ACK SYN -j ACCEPT 
-A INPUT -s 212.27.40.240/32 -p udp -j ACCEPT 
-A INPUT -i lo -j ACCEPT 
-A INPUT -p icmp -m limit --limit 10/sec -j ACCEPT 
-A INPUT -d 255.255.255.255/32 -i eth0 -j DROP 
-A INPUT -d 82.248.30.255/32 -j DROP 
-A INPUT -s 224.0.0.0/8 -j DROP 
-A INPUT -d 224.0.0.0/8 -j DROP 
-A INPUT -s 255.255.255.255/32 -j DROP 
-A INPUT -d 0.0.0.0/32 -j DROP 
-A INPUT -m state --state INVALID -j DROP 
-A INPUT -f -m limit --limit 10/min -j LSI 
-A INPUT -i eth0 -j INBOUND 
-A INPUT -d 192.168.2.51/32 -i eth2 -j INBOUND 
-A INPUT -d 82.248.30.98/32 -i eth2 -j INBOUND 
-A INPUT -d 192.168.2.255/32 -i eth2 -j INBOUND 
-A INPUT -j LOG_FILTER 
-A INPUT -j LOG --log-prefix "Unknown Input" --log-level 6 
-A FORWARD -p icmp -m limit --limit 10/sec -j ACCEPT 
-A FORWARD -p tcp -m tcp --tcp-flags SYN,RST SYN -j TCPMSS --clamp-mss-to-pmtu 
-A FORWARD -i eth2 -j OUTBOUND 
-A FORWARD -d 192.168.2.0/24 -p tcp -m state --state RELATED,ESTABLISHED -j ACCEPT 
-A FORWARD -d 192.168.2.0/24 -p udp -m state --state RELATED,ESTABLISHED -j ACCEPT 
-A FORWARD -j LOG_FILTER 
-A FORWARD -j LOG --log-prefix "Unknown Forward" --log-level 6 
-A OUTPUT -s 82.248.30.98/32 -d 212.27.40.241/32 -p tcp -m tcp --dport 53 -j ACCEPT 
-A OUTPUT -s 82.248.30.98/32 -d 212.27.40.241/32 -p udp -m udp --dport 53 -j ACCEPT 
-A OUTPUT -s 82.248.30.98/32 -d 212.27.40.240/32 -p tcp -m tcp --dport 53 -j ACCEPT 
-A OUTPUT -s 82.248.30.98/32 -d 212.27.40.240/32 -p udp -m udp --dport 53 -j ACCEPT 
-A OUTPUT -o lo -j ACCEPT 
-A OUTPUT -s 224.0.0.0/8 -j DROP 
-A OUTPUT -d 224.0.0.0/8 -j DROP 
-A OUTPUT -s 255.255.255.255/32 -j DROP 
-A OUTPUT -d 0.0.0.0/32 -j DROP 
-A OUTPUT -m state --state INVALID -j DROP 
-A OUTPUT -o eth0 -j OUTBOUND 
-A OUTPUT -o eth2 -j OUTBOUND 
-A OUTPUT -j LOG_FILTER 
-A OUTPUT -j LOG --log-prefix "Unknown Output" --log-level 6 
-A INBOUND -p tcp -m state --state RELATED,ESTABLISHED -j ACCEPT 
-A INBOUND -p udp -m state --state RELATED,ESTABLISHED -j ACCEPT 
-A INBOUND -j LSI 
-A LSI -j LOG_FILTER 
-A LSI -p tcp -m tcp --tcp-flags FIN,SYN,RST,ACK SYN -m limit --limit 1/sec -j LOG --log-prefix "Inbound " --log-level 6 
-A LSI -p tcp -m tcp --tcp-flags FIN,SYN,RST,ACK SYN -j DROP 
-A LSI -p tcp -m tcp --tcp-flags FIN,SYN,RST,ACK RST -m limit --limit 1/sec -j LOG --log-prefix "Inbound " --log-level 6 
-A LSI -p tcp -m tcp --tcp-flags FIN,SYN,RST,ACK RST -j DROP 
-A LSI -p icmp -m icmp --icmp-type 8 -m limit --limit 1/sec -j LOG --log-prefix "Inbound " --log-level 6 
-A LSI -p icmp -m icmp --icmp-type 8 -j DROP 
-A LSI -m limit --limit 5/sec -j LOG --log-prefix "Inbound " --log-level 6 
-A LSI -j DROP 
-A LSO -j LOG_FILTER 
-A LSO -m limit --limit 5/sec -j LOG --log-prefix "Outbound " --log-level 6 
-A LSO -j REJECT --reject-with icmp-port-unreachable 
-A OUTBOUND -p icmp -j ACCEPT 
-A OUTBOUND -p tcp -m state --state RELATED,ESTABLISHED -j ACCEPT 
-A OUTBOUND -p udp -m state --state RELATED,ESTABLISHED -j ACCEPT 
-A OUTBOUND -p tcp -m tcp --dport 27950 -j LSO 
-A OUTBOUND -p udp -m udp --dport 27950 -j LSO 
-A OUTBOUND -p tcp -m tcp --dport 27650 -j LSO 
-A OUTBOUND -p udp -m udp --dport 27650 -j LSO 
-A OUTBOUND -p tcp -m tcp --dport 28004 -j LSO 
-A OUTBOUND -p udp -m udp --dport 28004 -j LSO 
-A OUTBOUND -p tcp -m tcp --dport 27666 -j LSO 
-A OUTBOUND -p udp -m udp --dport 27666 -j LSO 
-A OUTBOUND -j ACCEPT 
COMMIT
# Completed on Wed Apr 18 17:50:04 2012

voilà j’espère que cela va t’aider pour diagnostiquer le souci, et merci pour ton aide :slightly_smiling:

#9

Hep ! -p spécifie le port source, pas destination. On peut voir que le port destination est encore 80 (port par défaut). Il faut simplement spécifier le port après le nom d’hôte, sans -p.

#10

haha ça m’apprendra a lire le man en diagonal :laughing:

voici la commande telle que tu la voulait :

tcptraceroute www.google.fr 443
Selected device eth0, address 82.248.30.98, port 57656 for outgoing packets
Tracing the path to www.google.fr (173.194.78.94) on TCP port 443 (https), 30 hops max
 1  * * *
 2  * * *
 3  * * *
 4  * * *
 5  * * *
 6  * * *
 7  * * *
 8  * * *
 9  * * *
10  * * *
11  * * *
12  * * *
13  * * *
14  * * *
15  * * *
16  * * *
17  * * *
18  * * *
19  * * *
20  * * *
21  * * *
22  * * *
23  * * *
24  * * *
25  * * *
26  * * *
27  * * *
28  * * *
29  * * *
30  * * *
Destination not reached
#11

Hypothèse 1 :
Ton fichier /etc/network/interfaces nous indique :

[quote]# The primary network interface
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp[/quote]

La ligne activant le DHCP n’est pas commentée ?

Hypothèse 2 :
As-tu activé le mode routeur sur ta bobox ? Si oui, pourquoi eth0 possède une IP en 82.x.x.x ?

eth0 Link encap:Ethernet HWaddr 00:40:f4:c2:43:4c inet adr:82.251.14.152 Bcast:82.251.14.255 Masque:255.255.255.0

Que te retourne la commande suivante :

Merci

#12

Bonjour secuip :slightly_smiling:

hum il vient de se passer quelque chose d’intéressant :
alors pour rassurer tout le monde, je confirme que j’ai de nouveau ma connexion depuis ce poste qui fonctionne. :slightly_smiling:

suite a ton message, j’ai commenté le fichier interfaces, pour voir ce que cela allait donner, et c’est cela qui m’a remis ma connexion, alors je me demande si lorsque j’ai redémarré ma box l’autre jour cela n’a pas eu pour effet de bord de remettre mes paramètres de box par defaut, cela m’étonne un peu, ou alors il y a eu un souci autre venant de chez mon fai (je suis chez free) qui aurait enlevé mes rêglage de box … bref il faut que je retrouve mes identifiant free et que je verifie de ce coté, cela a peut être un lien avec les souci de box que j’ai eu juste avant et qui m’avaient forcé a la redémarrer.

merci pour votre aide a tous et pour le temps que vous avez consacré à analyser mes souci :slightly_smiling:

je passe le sujet en résolu.

Cordialement,
Sébastien.

#13

Cool !

Et quelle est l’@ IP attribuée à l’eth0 ? Par curiosité :wink:

#14

un petit ifconfig de derrière les fagots mindique cela :

ifconfig
eth0      Link encap:Ethernet  HWaddr 00:40:f4:c2:43:4c  
          inet adr:82.248.30.98  Bcast:82.248.30.255  Masque:255.255.255.0
          adr inet6: fe80::240:f4ff:fec2:434c/64 Scope:Lien
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:10298 errors:0 dropped:0 overruns:0 frame:0
          TX packets:8992 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000 
          RX bytes:9773120 (9.3 MiB)  TX bytes:1007584 (983.9 KiB)
          Interruption:16 Adresse de base:0xec00 

eth2      Link encap:Ethernet  HWaddr 90:e6:ba:3c:40:b6  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interruption:28 Adresse de base:0xc000 

lo        Link encap:Boucle locale  
          inet adr:127.0.0.1  Masque:255.0.0.0
          adr inet6: ::1/128 Scope:Hôte
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:20 errors:0 dropped:0 overruns:0 frame:0
          TX packets:20 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 lg file transmission:0 
          RX bytes:1160 (1.1 KiB)  TX bytes:1160 (1.1 KiB)

ps : je galère un peu pour retrouver le mail ou sont notés mes identifiants de box c’est que ça fait un bout de temps qu’il m’a été envoyé ce mail, donc je pense que ne saurais pas à quoi m’en tenir concernant ma box pour ce soir, mais je tiendrais bon de jouer les indiana jones jusqu’a ce que je les retrouves :laughing:

#15

Ta freebox est en mode modem (et non pas routeur).

Tu arrive à surfer avec tes deux ordinateurs en même temps avec cette configuration ?

https://subscribe.free.fr/login/send_pass.html

:wink:

#16

je ne sais pas si je peux surfer avec les deux pc, car j’ai toujours fait en sorte que mon pc principale partage la connexion vers les autres (mon pc portable ou vers les pc de pote squattant chez moi … d’ou l’utilité que j’avais eu a posséder deux carte réseau).
mais la je ne peut pas partager ma connection car eth2 n’est pas configuré … donc il faudra que je remette ma box en routeur (faudra aussi que j’essaye de savoir pourquoi ça a changé … car depuis le temps que je suis chez free, j’avais jamais eu ce coup là) et enfin je pourrais reconfigurer (décommenter :mrgreen: ) mon réseau comme il l’était jusqu’a il y a deux jours

ps : merci pour l’adresse de recup des mot de passe, je vais gagner du temps :wink:

#17

Ok, merci du retour et bon surf.

:023