Re bonjour,
J’ai une carte bi-écran (asus nvidia geforce6600) avec 2 écrans, et pour l’instant par défaut, les affichages sont “clonés”, et la résolution est trop faible, il faut normalement du 1600 x 1200 à 60 Hz.
Si besoin j’ai récupéré les modes d’affichages avec leur réglages de fréquence verticale et horizontale exactes fourni par Samsung, la marque de mes écrans.
Je voudrais également pouvoir étendre le bureau sur les 2 écrans et donc en résolution 1600 x 1200 pour chaque.
Alors je ne sais pas si je dois installer un pilote spécifique de nvidia pour cela, ce qui n’emballerait pas des masses, vu le novice que je suis…
ou peut-etre juste quelques modifs dans certains fichiers suffiraient ?
Voici le contenu du fichier xorg.conf :
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath “/usr/X11R6/lib/X11/fonts/75dpi”
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option “XkbRules” "xorg"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
Option “XkbVariant” "latin9"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option “Device” "/dev/input/mice"
Option “Protocol” "ImPS/2"
Option “Emulate3Buttons” "true"
EndSection
Section "Device"
Identifier "Carte vidéo générique"
Driver "vesa"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "SyncMaster"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Carte vidéo générique"
Monitor "SyncMaster"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes “1600x1200” “1280x1024” “1280x960” “1152x864” “1024x768” “832x624” “800x600” “720x400” "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes “1600x1200” “1280x1024” “1280x960” “1152x864” “1024x768” “832x624” “800x600” “720x400” "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes “1600x1200” “1280x1024” “1280x960” “1152x864” “1024x768” “832x624” “800x600” “720x400” "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes “1600x1200” “1280x1024” “1280x960” “1152x864” “1024x768” “832x624” “800x600” “720x400” "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes “1600x1200” “1280x1024” “1280x960” “1152x864” “1024x768” “832x624” “800x600” “720x400” "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes “1600x1200” “1280x1024” “1280x960” “1152x864” “1024x768” “832x624” “800x600” “720x400” "640x480"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "DRI"
Mode 0666
EndSection
On voit bien dans “screen” le 1600x1200 mais les préférences du sous-menu résolutions d’écran ne le propose pas (1280 x 1024 maxi), donc je suppose que cela vient du pilote de la carte graphique.
La commande $ lspci :
00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3)
00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2)
00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3)
00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2)
00:0a.0 Bridge: nVidia Corporation CK804 Ethernet Controller (rev a3)
00:0b.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0c.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTra nsport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Con troller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscella neous Control
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a 2)
05:06.0 Multimedia controller: Motorola DSP56301 Digital Signal Processor (rev 0 2)
05:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Cont roller (PHY/Link)
le chip graphique est bien identifié, mais apparemment çà ne suffit pas pour exploiter la résolution au max, ainsi que pour l’extension du bureau sur les 2 écrans.
Est-ce que quelqu’un pourrait me donner quelques explications ou informations pour avancer ?
C’est assez frustrant quand on ne connait pas bien un nouveau système, le moindre soucis et on bloque. 
J’en ai pas mal d’autres en réserve… 
A+