Problème, l'ordinateur gèle

Support Debian
#1

Salut, voici mon problème, j’ai installé Debian Lenny (Xfce) sur l’ordinateur de ma mère http://forum.debian-fr.org/viewtopic.php?f=3&t=17454

[quote=“Alexandre1545”]Salut, j’aimerais pouvoir installé Linux sur l’ordinateur de ma mère:

Compaq Presario S6100NX

Intel Celeron 2.8 Ghz
256 Mb de RAM
Disque Dur de 80 G[/quote]

voila, c’est fais, mais parfois, lorsque que je suis sur l’ordinateur, l’ordinateur, peut d’un coup, geler et ne plus fonctionner, j’ai essayer Ctrl+Alt+Backspace, mais sa ne fonctionne pas, elle devien inutilisable, ils foaut que je maintienne le bouton de mise sous tension pour que l’ordinateur finalement se ferme d’un seul coup, voici le problème, je sais que c’Est vague mais se sont les seul info que j’ai.

#2

Salut

En dernier recours il existe aussi les magic keys :

alt+syst+b : reboot alt+syst+o : arrêt alt+syst+s : synchronisation des disques alt+syst+u : disques durs en lecture seule alt+syst+e : arrêt de tous les programmes alt+syst+i : killer tous les programmes alt+syst+f : killer le process consommant le plus de RAM

Ont elles un effet dans ton cas ?

Repère une heure precise ou ca plante, puis va faire un tour dans les log /var/log/messages et /var/log/syslog pour nous en donner le contenu à +/- 5min du crash

#3

[quote=“SpaTule”]Salut

En dernier recours il existe aussi les magic keys :

alt+syst+b : reboot alt+syst+o : arrêt alt+syst+s : synchronisation des disques alt+syst+u : disques durs en lecture seule alt+syst+e : arrêt de tous les programmes alt+syst+i : killer tous les programmes alt+syst+f : killer le process consommant le plus de RAM

Ont elles un effet dans ton cas ?h[/quote]

Non, aucune effets

L’ordinateur à geler deux fois

#4

/var/log/messages

Mar 16 18:01:04 berniserivest-desktop shutdown[2534]: shutting down for system halt
Mar 16 18:18:48 berniserivest-desktop kernel: imklog 3.18.6, log source = /proc/kmsg started.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuset
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Initializing cgroup subsys cpu
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-provided physical RAM map:
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] 0MB HIGHMEM available.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] 247MB LOWMEM available.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] found SMP MP-table at [c00f5ea0] 000f5ea0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Zone PFN ranges:
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] DMA 0 -> 4096
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Normal 4096 -> 63472
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] HighMem 63472 -> 63472
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Movable zone start PFN for each node
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] early_node_map[1] active PFN ranges
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] 0: 0 -> 63472
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] DMI 2.3 present.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: RSDP 000F7E40, 0014 (r0 IntelR)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: RSDT 0F7F3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD 1)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: FACP 0F7F3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 1)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: DSDT 0F7F30C0, 397D (r1 INTELR AWRDACPI 1000 MSFT 100000D)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: FACS 0F7F0000, 0040
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: APIC 0F7F6A40, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD 1)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0f800000:ef400000)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62976
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-686 root=/dev/hda1 ro
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Enabling fast FPU save and restore… done.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support… done.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Initializing CPU#0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Detected 2800.079 MHz processor.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] Console: colour VGA+ 80x25
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] console [tty0] enabled
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] Memory: 245828k/253888k available (1769k kernel code, 7448k reserved, 752k data, 244k init, 0k highmem)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] virtual kernel memory layout:
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] vmalloc : 0xd0000000 - 0xff7fe000 ( 759 MB)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] lowmem : 0xc0000000 - 0xcf7f0000 ( 247 MB)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode…Ok.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084049] Calibrating delay using timer specific routine… 5606.20 BogoMIPS (lpj=11212410)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084215] Security Framework initialized
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084270] SELinux: Disabled at boot.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084318] Capability LSM initialized
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084391] Mount-cache hash table entries: 512
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084711] Initializing cgroup subsys ns
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084772] Initializing cgroup subsys cpuacct
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084821] Initializing cgroup subsys devices
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084917] CPU: Trace cache: 12K uops, L1 D cache: 8K
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.085000] CPU: L2 cache: 128K
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.085047] CPU: Hyper-Threading is disabled
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.085096] Intel machine check architecture supported.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.085148] Intel machine check reporting enabled on CPU#0.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.085198] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.085249] CPU0: Thermal monitoring enabled
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.085322] Checking ‘hlt’ instruction… OK.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.100424] SMP alternatives: switching to UP code
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.109266] ACPI: Core revision 20080321
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.119505] ENABLING IO-APIC IRQs
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.119744] …TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.159535] CPU0: Intel® Celeron® CPU 2.80GHz stepping 09
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.160010] Brought up 1 CPUs
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.160010] Total of 1 processors activated (5606.20 BogoMIPS).
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.160010] net_namespace: 660 bytes
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.160010] Booting paravirtualized kernel on bare hardware
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.160010] NET: Registered protocol family 16
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.160010] ACPI: bus type pci registered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.188011] PCI: PCI BIOS revision 2.10 entry at 0xfba40, last bus=1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.188011] PCI: Using configuration type 1 for base access
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.188011] Setting up standard PCI resources
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.210409] ACPI: Interpreter enabled
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.210469] ACPI: (supports S0 S1 S3 S4 S5)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.210699] ACPI: Using IOAPIC for interrupt routing
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.220345] ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.220992] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.220996] * this clock source is slow. If you are sure your timer does not have
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.220998] * this bug, please use “acpi_pm_good” to disable the workaround
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.221208] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.221270] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.221646] PCI: Transparent bridge - 0000:00:1e.0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.233040] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.233638] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.234227] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.234825] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11 12 14 15)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.235414] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.236117] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.236782] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.237443] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.238300] Linux Plug and Play Support v0.97 © Adam Belay
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.238470] pnp: PnP ACPI init
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.238536] ACPI: bus type pnp registered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.244832] pnp: PnP ACPI: found 13 devices
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.244887] ACPI: ACPI bus type pnp unregistered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.244938] PnPBIOS: Disabled by ACPI PNP
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.245908] PCI: Using ACPI for IRQ routing
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246399] ACPI: RTC can wake from S4
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246530] system 00:01: ioport range 0xb78-0xb7b has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246584] system 00:01: ioport range 0xf78-0xf7b has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246634] system 00:01: ioport range 0xa78-0xa7b has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246683] system 00:01: ioport range 0xe78-0xe7b has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246733] system 00:01: ioport range 0xbbc-0xbbf has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246782] system 00:01: ioport range 0xfbc-0xfbf has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246832] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246881] system 00:01: ioport range 0x294-0x297 has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246947] system 00:0a: ioport range 0x400-0x4bf could not be reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.278530] PCI: Bridge: 0000:00:1e.0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.278587] IO window: c000-cfff
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.278635] MEM window: 0xec000000-0xedffffff
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.278684] PREFETCH window: 0x0000000010000000-0x00000000100fffff
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.278815] NET: Registered protocol family 2
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.279057] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.279489] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.279608] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.279731] TCP: Hash tables configured (established 8192 bind 8192)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.279784] TCP reno registered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.280149] NET: Registered protocol family 1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.280382] checking if image is initramfs… it is
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.453145] Freeing initrd memory: 1917k freed
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.454959] audit: initializing netlink socket (disabled)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.455039] type=2000 audit(1237241911.452:1): initialized
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.455295] Total HugeTLB memory allocated, 0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.455551] VFS: Disk quotas dquot_6.5.1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.455651] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.455808] msgmni has been set to 484
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.456210] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.456281] io scheduler noop registered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.456327] io scheduler anticipatory registered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.456375] io scheduler deadline registered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.456467] io scheduler cfq registered (default)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.457641] isapnp: Scanning for PnP cards…
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.811861] isapnp: No Plug & Play device found
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.821654] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.821980] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.823205] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.828837] brd: module loaded
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.829195] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.829251] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.830089] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.830514] mice: PS/2 mouse device common for all mice
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.830932] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.831007] rtc0: alarms up to one month
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.831184] cpuidle: using governor ladder
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.831234] cpuidle: using governor menu
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.831290] No iBFT detected.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.831820] TCP cubic registered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.831873] NET: Registered protocol family 17
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.831930] Using IPI No-Shortcut mode
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.832448] registered taskstats version 1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.832662] rtc_cmos 00:03: setting system clock to 2009-03-16 22:18:32 UTC (1237241912)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.833129] Freeing unused kernel memory: 244k freed
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.857451] input: AT Translated Set 2 keyboard as /class/input/input0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.899045] No dock devices found.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.910802] SCSI subsystem initialized
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.930999] Uniform Multi-Platform E-IDE driver
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.931058] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.932396] ICH4: IDE controller (0x8086:0x24cb rev 0x02) at PCI slot 0000:00:1f.1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.932481] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.932584] ICH4: not 100% native mode: will probe irqs later
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.932646] ide0: BM-DMA at 0xf000-0xf007
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.932702] ide1: BM-DMA at 0xf008-0xf00f
Mar 16 18:18:48 berniserivest-desktop kernel: [ 1.220180] hda: WDC WD800BB-22DKA0, ATA DISK drive
Mar 16 18:18:48 berniserivest-desktop kernel: [ 1.893121] hda: UDMA/100 mode selected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 2.628178] hdc: IDE-DVD ROM 16x, ATAPI CD/DVD-ROM drive
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.412179] hdd: SONY CD-RW CRX215E5, ATAPI CD/DVD-ROM drive
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.468413] hdc: UDMA/33 mode selected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.469033] hdd: UDMA/33 mode selected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.469582] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.488193] ide1 at 0x170-0x177,0x376 on irq 15
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.499805] hda: max request size: 512KiB
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.500868] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.502269] hda: cache flushes supported
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.502394] hda: hda1 hda2 < hda5 >
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.590980] ACPI: ACPI0007:00 is registered as cooling_device0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 4.281643] hdc: ATAPI 40X DVD-ROM drive, 256kB Cache
Mar 16 18:18:48 berniserivest-desktop kernel: [ 4.281829] Uniform CD-ROM driver Revision: 3.20
Mar 16 18:18:48 berniserivest-desktop kernel: [ 4.289541] hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache
Mar 16 18:18:48 berniserivest-desktop kernel: [ 4.567851] PM: Starting manual resume from disk
Mar 16 18:18:48 berniserivest-desktop kernel: [ 4.661282] kjournald starting. Commit interval 5 seconds
Mar 16 18:18:48 berniserivest-desktop kernel: [ 4.661367] EXT3-fs: mounted filesystem with ordered data mode.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 6.818339] udevd version 125 started
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.376081] Linux agpgart interface v0.103
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.397770] agpgart: Detected an Intel 830M Chipset.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.397949] agpgart: Detected 8060K stolen memory.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.415151] agpgart: AGP aperture is 128M @ 0xe0000000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.537635] usbcore: registered new interface driver usbfs
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.537746] usbcore: registered new interface driver hub
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.537906] usbcore: registered new device driver usb
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.550156] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.566412] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

#5

/var/log/messages (suite)

Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.589526] USB Universal Host Controller Interface driver v3.0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.589663] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.589775] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.590132] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.590240] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.590435] usb usb1: configuration #1 chosen from 1 choice
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.590538] hub 1-0:1.0: USB hub found
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.590605] hub 1-0:1.0: 2 ports detected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.604649] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.604810] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.604902] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.661370] intel_rng: FWH not detected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.678789] input: Power Button (FF) as /class/input/input1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692292] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692351] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692410] usb usb1: Product: UHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692457] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692505] usb usb1: SerialNumber: 0000:00:1d.0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692636] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692745] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692850] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692949] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.693131] usb usb2: configuration #1 chosen from 1 choice
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.693238] hub 2-0:1.0: USB hub found
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.693305] hub 2-0:1.0: 2 ports detected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.716143] ACPI: Power Button (FF) [PWRF]
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.716322] input: Power Button (CM) as /class/input/input2
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.748107] ACPI: Power Button (CM) [PWRB]
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796242] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796301] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796359] usb usb2: Product: UHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796406] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796454] usb usb2: SerialNumber: 0000:00:1d.1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796581] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796691] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796807] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796914] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.797100] usb usb3: configuration #1 chosen from 1 choice
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.797204] hub 3-0:1.0: USB hub found
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.797269] hub 3-0:1.0: 2 ports detected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900236] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900296] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900355] usb usb3: Product: UHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900402] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900450] usb usb3: SerialNumber: 0000:00:1d.2
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900641] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900764] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900877] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.904874] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee080000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.920047] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.920250] usb usb4: configuration #1 chosen from 1 choice
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.920355] hub 4-0:1.0: USB hub found
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.920419] hub 4-0:1.0: 6 ports detected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.024264] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.024322] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.024381] usb usb4: Product: EHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.024428] usb usb4: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.024476] usb usb4: SerialNumber: 0000:00:1d.7
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.568072] usb 3-2: new low speed USB device using uhci_hcd and address 2
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.590109] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.657146] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.710610] 8139too Fast Ethernet driver 0.9.28
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.710725] ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 23 (level, low) -> IRQ 23
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.711566] eth0: RealTek RTL8139 at 0xc800, 00:0c:76:89:77:1c, IRQ 23
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.745959] usb 3-2: configuration #1 chosen from 1 choice
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.746225] input: PC Speaker as /class/input/input3
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.749093] usb 3-2: New USB device found, idVendor=045e, idProduct=00f6
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.749153] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.749204] usb 3-2: Product: Comfort Optical Mouse 1000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.749252] usb 3-2: Manufacturer: Microsoft
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.908910] Floppy drive(s): fd0 is 2.88M AMI BIOS
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.927894] FDC 0 is a post-1991 82077
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.967528] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
Mar 16 18:18:48 berniserivest-desktop kernel: [ 10.043659] parport_pc 00:08: reported by Plug and Play ACPI
Mar 16 18:18:48 berniserivest-desktop kernel: [ 10.043810] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
Mar 16 18:18:48 berniserivest-desktop kernel: [ 10.292070] intel8x0_measure_ac97_clock: measured 53549 usecs
Mar 16 18:18:48 berniserivest-desktop kernel: [ 10.292126] intel8x0: clocking to 48000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 11.006596] usbcore: registered new interface driver hiddev
Mar 16 18:18:48 berniserivest-desktop kernel: [ 11.022857] input: Microsoft Comfort Optical Mouse 1000 as /class/input/input4
Mar 16 18:18:48 berniserivest-desktop kernel: [ 11.052174] input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:1d.2-2
Mar 16 18:18:48 berniserivest-desktop kernel: [ 11.052400] usbcore: registered new interface driver usbhid
Mar 16 18:18:48 berniserivest-desktop kernel: [ 11.052453] usbhid: v2.6:USB HID core driver
Mar 16 18:18:48 berniserivest-desktop kernel: [ 12.338769] Adding 722884k swap on /dev/hda5. Priority:-1 extents:1 across:722884k
Mar 16 18:18:48 berniserivest-desktop kernel: [ 12.709726] EXT3 FS on hda1, internal journal
Mar 16 18:18:48 berniserivest-desktop kernel: [ 13.073393] loop: module loaded
Mar 16 18:18:48 berniserivest-desktop kernel: [ 15.393202] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Mar 16 18:18:48 berniserivest-desktop rsyslogd: [origin software=“rsyslogd” swVersion=“3.18.6” x-pid=“1936” x-info=“http://www.rsyslog.com”] restart
Mar 16 18:18:48 berniserivest-desktop kernel: [ 17.614233] NET: Registered protocol family 10
Mar 16 18:18:48 berniserivest-desktop kernel: [ 17.614911] lo: Disabled Privacy Extensions
Mar 16 18:18:49 berniserivest-desktop kernel: [ 18.012535] lp0: using parport0 (interrupt-driven).
Mar 16 18:18:49 berniserivest-desktop kernel: [ 18.044243] ppdev: user-space parallel port driver
Mar 16 18:18:55 berniserivest-desktop kernel: [ 24.717774] [drm] Initialized drm 1.1.0 20060810
Mar 16 18:18:55 berniserivest-desktop kernel: [ 24.732068] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
Mar 16 18:18:55 berniserivest-desktop kernel: [ 24.732232] [drm] Initialized i915 1.6.0 20060119 on minor 0
Mar 16 19:36:15 berniserivest-desktop kernel: imklog 3.18.6, log source = /proc/kmsg started.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuset
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Initializing cgroup subsys cpu
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-provided physical RAM map:
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] 0MB HIGHMEM available.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] 247MB LOWMEM available.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] found SMP MP-table at [c00f5ea0] 000f5ea0
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Zone PFN ranges:
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] DMA 0 -> 4096
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Normal 4096 -> 63472
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] HighMem 63472 -> 63472
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Movable zone start PFN for each node
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] early_node_map[1] active PFN ranges
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] 0: 0 -> 63472
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] DMI 2.3 present.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: RSDP 000F7E40, 0014 (r0 IntelR)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: RSDT 0F7F3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD 1)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: FACP 0F7F3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 1)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: DSDT 0F7F30C0, 397D (r1 INTELR AWRDACPI 1000 MSFT 100000D)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: FACS 0F7F0000, 0040
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: APIC 0F7F6A40, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD 1)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0f800000:ef400000)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62976
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-686 root=/dev/hda1 ro
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Enabling fast FPU save and restore… done.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support… done.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Initializing CPU#0
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Detected 2800.067 MHz processor.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.004000] Console: colour VGA+ 80x25
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.004000] console [tty0] enabled
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.004000] Memory: 245828k/253888k available (1769k kernel code, 7448k reserved, 752k data, 244k init, 0k highmem)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.004000] virtual kernel memory layout:
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.004000] vmalloc : 0xd0000000 - 0xff7fe000 ( 759 MB)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.004000] lowmem : 0xc0000000 - 0xcf7f0000 ( 247 MB)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode…Ok.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.084047] Calibrating delay using timer specific routine… 5606.18 BogoMIPS (lpj=11212366)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.084213] Security Framework initialized
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.084268] SELinux: Disabled at boot.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.084316] Capability LSM initialized
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.084391] Mount-cache hash table entries: 512
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.084708] Initializing cgroup subsys ns
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.084769] Initializing cgroup subsys cpuacct
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.084817] Initializing cgroup subsys devices
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.084911] CPU: Trace cache: 12K uops, L1 D cache: 8K
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.084994] CPU: L2 cache: 128K
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.085040] CPU: Hyper-Threading is disabled
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.085091] Intel machine check architecture supported.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.085142] Intel machine check reporting enabled on CPU#0.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.085193] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.085244] CPU0: Thermal monitoring enabled
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.085318] Checking ‘hlt’ instruction… OK.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.100426] SMP alternatives: switching to UP code
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.109253] ACPI: Core revision 20080321
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.119550] ENABLING IO-APIC IRQs
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.119786] …TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.159578] CPU0: Intel® Celeron® CPU 2.80GHz stepping 09
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.160010] Brought up 1 CPUs
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.160010] Total of 1 processors activated (5606.18 BogoMIPS).
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.160010] net_namespace: 660 bytes
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.160010] Booting paravirtualized kernel on bare hardware
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.160010] NET: Registered protocol family 16
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.160010] ACPI: bus type pci registered
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.188011] PCI: PCI BIOS revision 2.10 entry at 0xfba40, last bus=1
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.188011] PCI: Using configuration type 1 for base access
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.188011] Setting up standard PCI resources
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.210759] ACPI: Interpreter enabled
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.210817] ACPI: (supports S0 S1 S3 S4 S5)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.211046] ACPI: Using IOAPIC for interrupt routing
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.220468] ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.221119] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.221122] * this clock source is slow. If you are sure your timer does not have
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.221124] * this bug, please use “acpi_pm_good” to disable the workaround
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.221335] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.221395] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.221770] PCI: Transparent bridge - 0000:00:1e.0
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.233309] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.233908] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.234496] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.235096] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11 12 14 15)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.235683] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.236380] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.237044] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.237700] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.238531] Linux Plug and Play Support v0.97 © Adam Belay
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.238695] pnp: PnP ACPI init
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.238758] ACPI: bus type pnp registered
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.245046] pnp: PnP ACPI: found 13 devices
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.245103] ACPI: ACPI bus type pnp unregistered
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.245156] PnPBIOS: Disabled by ACPI PNP
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.246206] PCI: Using ACPI for IRQ routing
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.246721] ACPI: RTC can wake from S4
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.246851] system 00:01: ioport range 0xb78-0xb7b has been reserved
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.246905] system 00:01: ioport range 0xf78-0xf7b has been reserved
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.246954] system 00:01: ioport range 0xa78-0xa7b has been reserved
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.247003] system 00:01: ioport range 0xe78-0xe7b has been reserved
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.247052] system 00:01: ioport range 0xbbc-0xbbf has been reserved
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.247101] system 00:01: ioport range 0xfbc-0xfbf has been reserved
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.247150] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.247200] system 00:01: ioport range 0x294-0x297 has been reserved
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.247267] system 00:0a: ioport range 0x400-0x4bf could not be reserved
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.278851] PCI: Bridge: 0000:00:1e.0
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.278907] IO window: c000-cfff
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.278956] MEM window: 0xec000000-0xedffffff
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.279005] PREFETCH window: 0x0000000010000000-0x00000000100fffff
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.279142] NET: Registered protocol family 2

#6

/var/log/syslog

Mar 16 17:53:28 berniserivest-desktop kernel: [ 24.565440] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
Mar 16 17:53:28 berniserivest-desktop kernel: [ 24.565462] PCI: Setting latency timer of device 0000:00:02.0 to 64
Mar 16 17:53:28 berniserivest-desktop kernel: [ 24.565597] [drm] Initialized i915 1.6.0 20060119 on minor 0
Mar 16 17:53:31 berniserivest-desktop kernel: [ 27.804030] eth0: no IPv6 routers present
Mar 16 17:59:14 berniserivest-desktop gdmgreeter[2445]: WARNING: Theme broken: must have pam-message label!
Mar 16 18:00:47 berniserivest-desktop gdm[2338]: WARNING: gdm_slave_xioerror_handler : erreur X fatale - Redémarrage de :0
Mar 16 18:00:49 berniserivest-desktop acpid: client connected from 2515[0:0]
Mar 16 18:01:04 berniserivest-desktop acpid: client 2344[0:0] has disconnected
Mar 16 18:01:04 berniserivest-desktop shutdown[2534]: shutting down for system halt
Mar 16 18:01:04 berniserivest-desktop init: Switching to runlevel: 0
Mar 16 18:01:05 berniserivest-desktop rpc.statd[1630]: Caught signal 15, un-registering and exiting.
Mar 16 18:01:07 berniserivest-desktop avahi-daemon[1968]: Got SIGTERM, quitting.
Mar 16 18:01:07 berniserivest-desktop avahi-daemon[1968]: Leaving mDNS multicast group on interface eth0.IPv6 with address fe80::20c:76ff:fe89:771c.
Mar 16 18:01:07 berniserivest-desktop avahi-daemon[1968]: Leaving mDNS multicast group on interface eth0.IPv4 with address 192.168.0.103.
Mar 16 18:18:48 berniserivest-desktop kernel: imklog 3.18.6, log source = /proc/kmsg started.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuset
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Initializing cgroup subsys cpu
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-provided physical RAM map:
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] 0MB HIGHMEM available.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] 247MB LOWMEM available.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] found SMP MP-table at [c00f5ea0] 000f5ea0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Entering add_active_range(0, 0, 63472) 0 entries of 256 used
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Zone PFN ranges:
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] DMA 0 -> 4096
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Normal 4096 -> 63472
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] HighMem 63472 -> 63472
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Movable zone start PFN for each node
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] early_node_map[1] active PFN ranges
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] 0: 0 -> 63472
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] On node 0 totalpages: 63472
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] DMA zone: 0 pages reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Normal zone: 464 pages used for memmap
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Normal zone: 58912 pages, LIFO batch:15
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] HighMem zone: 0 pages used for memmap
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] DMI 2.3 present.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: RSDP 000F7E40, 0014 (r0 IntelR)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: RSDT 0F7F3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD 1)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: FACP 0F7F3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 1)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: DSDT 0F7F30C0, 397D (r1 INTELR AWRDACPI 1000 MSFT 100000D)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: FACS 0F7F0000, 0040
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: APIC 0F7F6A40, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD 1)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: IRQ0 used by override.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: IRQ2 used by override.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] ACPI: IRQ9 used by override.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Allocating PCI resources starting at 10000000 (gap: 0f800000:ef400000)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 62976
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-686 root=/dev/hda1 ro
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] mapped APIC to ffffb000 (fee00000)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Enabling fast FPU save and restore… done.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support… done.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Initializing CPU#0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.000000] Detected 2800.079 MHz processor.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] Console: colour VGA+ 80x25
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] console [tty0] enabled
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] Memory: 245828k/253888k available (1769k kernel code, 7448k reserved, 752k data, 244k init, 0k highmem)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] virtual kernel memory layout:
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] vmalloc : 0xd0000000 - 0xff7fe000 ( 759 MB)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] lowmem : 0xc0000000 - 0xcf7f0000 ( 247 MB)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode…Ok.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084049] Calibrating delay using timer specific routine… 5606.20 BogoMIPS (lpj=11212410)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084215] Security Framework initialized
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084270] SELinux: Disabled at boot.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084318] Capability LSM initialized
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084391] Mount-cache hash table entries: 512
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084711] Initializing cgroup subsys ns
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084772] Initializing cgroup subsys cpuacct
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084821] Initializing cgroup subsys devices
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.084917] CPU: Trace cache: 12K uops, L1 D cache: 8K
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.085000] CPU: L2 cache: 128K
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.085047] CPU: Hyper-Threading is disabled
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.085096] Intel machine check architecture supported.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.085148] Intel machine check reporting enabled on CPU#0.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.085198] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.085249] CPU0: Thermal monitoring enabled
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.085322] Checking ‘hlt’ instruction… OK.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.100424] SMP alternatives: switching to UP code
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.109266] ACPI: Core revision 20080321
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.119505] ENABLING IO-APIC IRQs
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.119744] …TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.159535] CPU0: Intel® Celeron® CPU 2.80GHz stepping 09
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.160010] Brought up 1 CPUs
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.160010] Total of 1 processors activated (5606.20 BogoMIPS).
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.160010] CPU0 attaching sched-domain:
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.160010] domain 0: span 0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.160010] groups: 0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.160010] net_namespace: 660 bytes
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.160010] Booting paravirtualized kernel on bare hardware
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.160010] NET: Registered protocol family 16
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.160010] ACPI: bus type pci registered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.188011] PCI: PCI BIOS revision 2.10 entry at 0xfba40, last bus=1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.188011] PCI: Using configuration type 1 for base access
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.188011] Setting up standard PCI resources
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.204012] ACPI: EC: Look up EC in DSDT
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.210409] ACPI: Interpreter enabled
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.210469] ACPI: (supports S0 S1 S3 S4 S5)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.210699] ACPI: Using IOAPIC for interrupt routing
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.220345] ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.220992] * The chipset may have PM-Timer Bug. Due to workarounds for a bug,
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.220996] * this clock source is slow. If you are sure your timer does not have
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.220998] * this bug, please use “acpi_pm_good” to disable the workaround
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.221208] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.221270] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH4 GPIO
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.221646] PCI: Transparent bridge - 0000:00:1e.0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.221732] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PRT]
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.222070] ACPI: PCI Interrupt Routing Table [_SB.PCI0.HUB0._PRT]
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.233040] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.233638] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.234227] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12 14 15)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.234825] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11 12 14 15)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.235414] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.236117] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.236782] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.237443] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 12 14 15)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.238300] Linux Plug and Play Support v0.97 © Adam Belay
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.238470] pnp: PnP ACPI init
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.238536] ACPI: bus type pnp registered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.244832] pnp: PnP ACPI: found 13 devices
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.244887] ACPI: ACPI bus type pnp unregistered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.244938] PnPBIOS: Disabled by ACPI PNP
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.245908] PCI: Using ACPI for IRQ routing
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246399] ACPI: RTC can wake from S4
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246530] system 00:01: ioport range 0xb78-0xb7b has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246584] system 00:01: ioport range 0xf78-0xf7b has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246634] system 00:01: ioport range 0xa78-0xa7b has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246683] system 00:01: ioport range 0xe78-0xe7b has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246733] system 00:01: ioport range 0xbbc-0xbbf has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246782] system 00:01: ioport range 0xfbc-0xfbf has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246832] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246881] system 00:01: ioport range 0x294-0x297 has been reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.246947] system 00:0a: ioport range 0x400-0x4bf could not be reserved
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.278530] PCI: Bridge: 0000:00:1e.0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.278587] IO window: c000-cfff
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.278635] MEM window: 0xec000000-0xedffffff
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.278684] PREFETCH window: 0x0000000010000000-0x00000000100fffff
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.278748] PCI: Setting latency timer of device 0000:00:1e.0 to 64
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.278815] NET: Registered protocol family 2
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.279057] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.279489] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.279608] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.279731] TCP: Hash tables configured (established 8192 bind 8192)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.279784] TCP reno registered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.280149] NET: Registered protocol family 1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.280382] checking if image is initramfs… it is
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.453145] Freeing initrd memory: 1917k freed
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.454959] audit: initializing netlink socket (disabled)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.455039] type=2000 audit(1237241911.452:1): initialized
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.455295] Total HugeTLB memory allocated, 0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.455551] VFS: Disk quotas dquot_6.5.1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.455651] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.455808] msgmni has been set to 484
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.456210] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.456281] io scheduler noop registered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.456327] io scheduler anticipatory registered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.456375] io scheduler deadline registered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.456467] io scheduler cfq registered (default)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.456535] pci 0000:00:02.0: Boot video device
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.457641] isapnp: Scanning for PnP cards…
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.780032] Switched to high resolution mode on CPU 0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.811861] isapnp: No Plug & Play device found
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.821654] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.821980] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.823205] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.828837] brd: module loaded
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.829195] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.829251] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.830089] serio: i8042 KBD port at 0x60,0x64 irq 1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.830514] mice: PS/2 mouse device common for all mice
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.830932] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.831007] rtc0: alarms up to one month
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.831184] cpuidle: using governor ladder
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.831234] cpuidle: using governor menu
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.831290] No iBFT detected.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.831820] TCP cubic registered
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.831873] NET: Registered protocol family 17
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.831930] Using IPI No-Shortcut mode
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.832448] registered taskstats version 1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.832662] rtc_cmos 00:03: setting system clock to 2009-03-16 22:18:32 UTC (1237241912)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.833129] Freeing unused kernel memory: 244k freed
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.857451] input: AT Translated Set 2 keyboard as /class/input/input0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.899045] No dock devices found.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.910802] SCSI subsystem initialized
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.921903] libata version 3.00 loaded.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.930999] Uniform Multi-Platform E-IDE driver
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.931058] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.932396] ICH4: IDE controller (0x8086:0x24cb rev 0x02) at PCI slot 0000:00:1f.1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.932481] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.932584] ICH4: not 100% native mode: will probe irqs later
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.932646] ide0: BM-DMA at 0xf000-0xf007
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.932702] ide1: BM-DMA at 0xf008-0xf00f
Mar 16 18:18:48 berniserivest-desktop kernel: [ 0.932752] Probing IDE interface ide0…
Mar 16 18:18:48 berniserivest-desktop kernel: [ 1.220180] hda: WDC WD800BB-22DKA0, ATA DISK drive
Mar 16 18:18:48 berniserivest-desktop kernel: [ 1.892202] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Mar 16 18:18:48 berniserivest-desktop kernel: [ 1.893121] hda: UDMA/100 mode selected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 1.894099] Probing IDE interface ide1…
Mar 16 18:18:48 berniserivest-desktop kernel: [ 2.628178] hdc: IDE-DVD ROM 16x, ATAPI CD/DVD-ROM drive
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.412179] hdd: SONY CD-RW CRX215E5, ATAPI CD/DVD-ROM drive
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.468189] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.468413] hdc: UDMA/33 mode selected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.468736] hdd: host max PIO4 wanted PIO255(auto-tune) selected PIO4
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.469033] hdd: UDMA/33 mode selected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.469582] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.488193] ide1 at 0x170-0x177,0x376 on irq 15
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.499805] hda: max request size: 512KiB
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.500868] hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.502269] hda: cache flushes supported
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.502394] hda: hda1 hda2 < hda5 >
Mar 16 18:18:48 berniserivest-desktop kernel: [ 3.590980] ACPI: ACPI0007:00 is registered as cooling_device0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 4.281643] hdc: ATAPI 40X DVD-ROM drive, 256kB Cache
Mar 16 18:18:48 berniserivest-desktop kernel: [ 4.281829] Uniform CD-ROM driver Revision: 3.20
Mar 16 18:18:48 berniserivest-desktop kernel: [ 4.289541] hdd: ATAPI 48X CD-ROM CD-R/RW drive, 2048kB Cache
Mar 16 18:18:48 berniserivest-desktop kernel: [ 4.567851] PM: Starting manual resume from disk
Mar 16 18:18:48 berniserivest-desktop kernel: [ 4.661282] kjournald starting. Commit interval 5 seconds
Mar 16 18:18:48 berniserivest-desktop kernel: [ 4.661367] EXT3-fs: mounted filesystem with ordered data mode.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 6.818339] udevd version 125 started
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.376081] Linux agpgart interface v0.103
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.397770] agpgart: Detected an Intel 830M Chipset.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.397949] agpgart: Detected 8060K stolen memory.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.415151] agpgart: AGP aperture is 128M @ 0xe0000000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.537635] usbcore: registered new interface driver usbfs
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.537746] usbcore: registered new interface driver hub
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.537906] usbcore: registered new device driver usb
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.550156] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.566412] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.589526] USB Universal Host Controller Interface driver v3.0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.589663] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.589770] PCI: Setting latency timer of device 0000:00:1d.0 to 64
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.589775] uhci_hcd 0000:00:1d.0: UHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.590132] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.590240] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000d800
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.590435] usb usb1: configuration #1 chosen from 1 choice
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.590538] hub 1-0:1.0: USB hub found
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.590605] hub 1-0:1.0: 2 ports detected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.604649] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.604810] iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0460)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.604902] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.661370] intel_rng: FWH not detected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.678789] input: Power Button (FF) as /class/input/input1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692292] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692351] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692410] usb usb1: Product: UHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692457] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692505] usb usb1: SerialNumber: 0000:00:1d.0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692636] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692740] PCI: Setting latency timer of device 0000:00:1d.1 to 64
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692745] uhci_hcd 0000:00:1d.1: UHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692850] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.692949] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.693131] usb usb2: configuration #1 chosen from 1 choice
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.693238] hub 2-0:1.0: USB hub found
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.693305] hub 2-0:1.0: 2 ports detected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.716143] ACPI: Power Button (FF) [PWRF]
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.716322] input: Power Button (CM) as /class/input/input2
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.748107] ACPI: Power Button (CM) [PWRB]
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796242] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796301] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796359] usb usb2: Product: UHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796406] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796454] usb usb2: SerialNumber: 0000:00:1d.1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796581] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796686] PCI: Setting latency timer of device 0000:00:1d.2 to 64
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796691] uhci_hcd 0000:00:1d.2: UHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796807] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.796914] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.797100] usb usb3: configuration #1 chosen from 1 choice
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.797204] hub 3-0:1.0: USB hub found
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.797269] hub 3-0:1.0: 2 ports detected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900236] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900296] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900355] usb usb3: Product: UHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900402] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900450] usb usb3: SerialNumber: 0000:00:1d.2
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900641] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900760] PCI: Setting latency timer of device 0000:00:1d.7 to 64
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900764] ehci_hcd 0000:00:1d.7: EHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.900877] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.904852] PCI: cache line size of 128 is not supported by device 0000:00:1d.7
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.904874] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xee080000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.920047] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.920250] usb usb4: configuration #1 chosen from 1 choice
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.920355] hub 4-0:1.0: USB hub found
Mar 16 18:18:48 berniserivest-desktop kernel: [ 8.920419] hub 4-0:1.0: 6 ports detected
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.024264] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.024322] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.024381] usb usb4: Product: EHCI Host Controller
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.024428] usb usb4: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.024476] usb usb4: SerialNumber: 0000:00:1d.7
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.568072] usb 3-2: new low speed USB device using uhci_hcd and address 2
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.590109] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.590200] 8139cp 0000:01:0c.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.590261] 8139cp 0000:01:0c.0: Try the “8139too” driver instead.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.657146] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.710610] 8139too Fast Ethernet driver 0.9.28
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.710725] ACPI: PCI Interrupt 0000:01:0c.0[A] -> GSI 23 (level, low) -> IRQ 23
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.711566] eth0: RealTek RTL8139 at 0xc800, 00:0c:76:89:77:1c, IRQ 23
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.711623] eth0: Identified 8139 chip type 'RTL-8101’
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.745959] usb 3-2: configuration #1 chosen from 1 choice
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.746225] input: PC Speaker as /class/input/input3
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.749093] usb 3-2: New USB device found, idVendor=045e, idProduct=00f6
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.749153] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.749204] usb 3-2: Product: Comfort Optical Mouse 1000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.749252] usb 3-2: Manufacturer: Microsoft
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.908910] Floppy drive(s): fd0 is 2.88M AMI BIOS
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.927894] FDC 0 is a post-1991 82077
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.967528] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
Mar 16 18:18:48 berniserivest-desktop kernel: [ 9.967685] PCI: Setting latency timer of device 0000:00:1f.5 to 64
Mar 16 18:18:48 berniserivest-desktop kernel: [ 10.043659] parport_pc 00:08: reported by Plug and Play ACPI
Mar 16 18:18:48 berniserivest-desktop kernel: [ 10.043810] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
Mar 16 18:18:48 berniserivest-desktop kernel: [ 10.292070] intel8x0_measure_ac97_clock: measured 53549 usecs
Mar 16 18:18:48 berniserivest-desktop kernel: [ 10.292126] intel8x0: clocking to 48000
Mar 16 18:18:48 berniserivest-desktop kernel: [ 11.006596] usbcore: registered new interface driver hiddev
Mar 16 18:18:48 berniserivest-desktop kernel: [ 11.022857] input: Microsoft Comfort Optical Mouse 1000 as /class/input/input4
Mar 16 18:18:48 berniserivest-desktop kernel: [ 11.052174] input,hidraw0: USB HID v1.11 Mouse [Microsoft Comfort Optical Mouse 1000] on usb-0000:00:1d.2-2
Mar 16 18:18:48 berniserivest-desktop kernel: [ 11.052400] usbcore: registered new interface driver usbhid
Mar 16 18:18:48 berniserivest-desktop kernel: [ 11.052453] usbhid: v2.6:USB HID core driver
Mar 16 18:18:48 berniserivest-desktop kernel: [ 12.338769] Adding 722884k swap on /dev/hda5. Priority:-1 extents:1 across:722884k
Mar 16 18:18:48 berniserivest-desktop kernel: [ 12.709726] EXT3 FS on hda1, internal journal
Mar 16 18:18:48 berniserivest-desktop kernel: [ 13.073393] loop: module loaded
Mar 16 18:18:48 berniserivest-desktop kernel: [ 15.393202] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Mar 16 18:18:48 berniserivest-desktop rsyslogd: [origin software=“rsyslogd” swVersion=“3.18.6” x-pid=“1936” x-info=“http://www.rsyslog.com”] restart
Mar 16 18:18:48 berniserivest-desktop avahi-daemon[1969]: Found user ‘avahi’ (UID 104) and group ‘avahi’ (GID 109).
Mar 16 18:18:48 berniserivest-desktop avahi-daemon[1969]: Successfully dropped root privileges.
Mar 16 18:18:48 berniserivest-desktop avahi-daemon[1969]: avahi-daemon 0.6.23 starting up.
Mar 16 18:18:48 berniserivest-desktop avahi-daemon[1969]: Successfully called chroot().
Mar 16 18:18:48 berniserivest-desktop avahi-daemon[1969]: Successfully dropped remaining capabilities.
Mar 16 18:18:48 berniserivest-desktop avahi-daemon[1969]: No service file found in /etc/avahi/services.
Mar 16 18:18:48 berniserivest-desktop kernel: [ 17.614233] NET: Registered protocol family 10
Mar 16 18:18:48 berniserivest-desktop kernel: [ 17.614911] lo: Disabled Privacy Extensions
Mar 16 18:18:48 berniserivest-desktop avahi-daemon[1969]: Joining mDNS multicast group on interface eth0.IPv6 with address fe80::20c:76ff:fe89:771c.
Mar 16 18:18:48 berniserivest-desktop avahi-daemon[1969]: New relevant interface eth0.IPv6 for mDNS.
Mar 16 18:18:48 berniserivest-desktop avahi-daemon[1969]: Network interface enumeration completed.
Mar 16 18:18:48 berniserivest-desktop avahi-daemon[1969]: Registering new address record for fe80::20c:76ff:fe89:771c on eth0..
Mar 16 18:18:48 berniserivest-desktop avahi-daemon[1969]: Registering HINFO record with values ‘I686’/‘LINUX’.
Mar 16 18:18:49 berniserivest-desktop dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
Mar 16 18:18:49 berniserivest-desktop dhclient: DHCPOFFER from 192.168.0.1
Mar 16 18:18:49 berniserivest-desktop dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67
Mar 16 18:18:49 berniserivest-desktop dhclient: DHCPACK from 192.168.0.1
Mar 16 18:18:49 berniserivest-desktop avahi-daemon[1969]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.103.
Mar 16 18:18:49 berniserivest-desktop avahi-daemon[1969]: New relevant interface eth0.IPv4 for mDNS.
Mar 16 18:18:49 berniserivest-desktop avahi-daemon[1969]: Registering new address record for 192.168.0.103 on eth0.IPv4.
Mar 16 18:18:49 berniserivest-desktop dhclient: bound to 192.168.0.103 – renewal in 247852 seconds.
Mar 16 18:18:49 berniserivest-desktop kernel: [ 18.012535] lp0: using parport0 (interrupt-driven).
Mar 16 18:18:49 berniserivest-desktop kernel: [ 18.044243] ppdev: user-space parallel port driver
Mar 16 18:18:49 berniserivest-desktop avahi-daemon[1969]: Server startup complete. Host name is berniserivest-desktop.local. Local service cookie is 559211084.
Mar 16 18:18:53 berniserivest-desktop anacron[2351]: Anacron 2.3 started on 2009-03-16
Mar 16 18:18:53 berniserivest-desktop anacron[2351]: Normal exit (0 jobs run)
Mar 16 18:18:53 berniserivest-desktop /usr/sbin/cron[2378]: (CRON) INFO (pidfile fd = 3)
Mar 16 18:18:53 berniserivest-desktop /usr/sbin/cron[2379]: (CRON) STARTUP (fork ok)
Mar 16 18:18:53 berniserivest-desktop /usr/sbin/cron[2379]: (CRON) INFO (Running @reboot jobs)
Mar 16 18:18:54 berniserivest-desktop acpid: client connected from 2345[0:0]
Mar 16 18:18:55 berniserivest-desktop kernel: [ 24.717774] [drm] Initialized drm 1.1.0 20060810
Mar 16 18:18:55 berniserivest-desktop kernel: [ 24.732068] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
Mar 16 18:18:55 berniserivest-desktop kernel: [ 24.732088] PCI: Setting latency timer of device 0000:00:02.0 to 64
Mar 16 18:18:55 berniserivest-desktop kernel: [ 24.732232] [drm] Initialized i915 1.6.0 20060119 on minor 0
Mar 16 18:18:59 berniserivest-desktop kernel: [ 28.572043] eth0: no IPv6 routers present
Mar 16 18:27:23 berniserivest-desktop gdmgreeter[2446]: WARNING: Theme broken: must have pam-message label!
Mar 16 19:17:01 berniserivest-desktop /USR/SBIN/CRON[2537]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly)
Mar 16 19:36:15 berniserivest-desktop kernel: imklog 3.18.6, log source = /proc/kmsg started.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Initializing cgroup subsys cpuset
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Initializing cgroup subsys cpu
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-provided physical RAM map:
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000000f7f0000 (usable)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 000000000f7f0000 - 000000000f7f3000 (ACPI NVS)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 000000000f7f3000 - 000000000f800000 (ACPI data)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] 0MB HIGHMEM available.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] 247MB LOWMEM available.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] found SMP MP-table at [c00f5ea0] 000f5ea0
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Entering add_active_range(0, 0, 63472) 0 entries of 256 used
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Zone PFN ranges:
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] DMA 0 -> 4096
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Normal 4096 -> 63472
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] HighMem 63472 -> 63472
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Movable zone start PFN for each node
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] early_node_map[1] active PFN ranges
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] 0: 0 -> 63472
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] On node 0 totalpages: 63472
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] DMA zone: 32 pages used for memmap
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] DMA zone: 0 pages reserved
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Normal zone: 464 pages used for memmap
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Normal zone: 58912 pages, LIFO batch:15
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] HighMem zone: 0 pages used for memmap
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] Movable zone: 0 pages used for memmap
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] DMI 2.3 present.
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: RSDP 000F7E40, 0014 (r0 IntelR)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: RSDT 0F7F3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD 1)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: FACP 0F7F3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 1)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: DSDT 0F7F30C0, 397D (r1 INTELR AWRDACPI 1000 MSFT 100000D)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: FACS 0F7F0000, 0040
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: APIC 0F7F6A40, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD 1)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0x408
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: Local APIC address 0xfee00000
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Mar 16 19:36:15 berniserivest-desktop kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])

#7

Tu as essayé de faire un test de ta RAM à partir d’un Live-CD ?

#8

J’ai essayer, et j’ai aucune erreur

#9

Salut,

Combien de temps à duré l’essai ? 1 mn, 1H, 1 journée

#10

Environ 15 Min

#11

sa ressemble a un pc qui surchauffe, que dise les sensors ?
il date de quand le pc ? déjà nettoyer ?

sa gèle aux plutôt quand ?
sa gèle aux plu-tard quand ?

#12

[quote=“panthere”]sa ressemble a un pc qui surchauffe, que dise les sensors ?
il date de quand le pc ? déjà nettoyer ?

sa gèle aux plutôt quand ?
sa gèle aux plu-tard quand ?[/quote]

Le PC date de environs 4 ou 5 années, jamais nettoyé , sa gèle on peut n’importe quand, mais environ aux plus tard, après 20 ou 30 min d’utilisation ou même de non utilisation, en autant que l’ordi soit overte , même si on fait rien dessus sa peut finir par geler.

J’ai essayer Damn Small Linux, et l’ordinateur na pas geler, mais la distribution est trop minimaliste, en se moment j’essaie Debian Etch, je vais voir ce que sa fais.

#13

DML est très léger donc ne fait rien chauffer ou presque mai bon.:slightly_smiling:
t’a scanner le disque des foit que les erreur ne vienne pas de là ?

#14

Si la machine n’a jamais été nettoyée depuis 5 ans je tablerais quand même bien sur un bon gros nettoyage des conduites d’aération ( de toute façon ça ne pourra pas lui faire de mal).
Après ça reste une opération ou il faut être minutieux (pas paumer de vis, remonter dans le bon sens … ce qui parait évident mais une fois tout le bordel étalé sur la table l’est beaucoup moins XD), prendre son temps, et si possible trouver le plan de montage (chez dell c’est quasi-systématique mais je ne pense pas que ça soit le cas chez les autres constructeurs).
Si tu décides de nettoyer : une bombe d’air sec sans alcool sert toujours et surtout ne pas tripoter de trop les ventilos, faut pas les fausser / flinguer en les faisant tourner dans un sens qui leur plait pas.

Sinon je ne sais pas si les plantages pourraient être dus à du soft “trop récent” qui se comporte mal sur une ancienne machine … m’enfin ça m’étonnerait … et pis c’est pas le premier prototype de minitel non plus ton portable :mrgreen: .

#15

C,est pas un portable, c’est un PC

[quote=“Alexandre1545”]Compaq Presario S6100NX

Intel Celeron 2.8 Ghz
256 Mb de RAM
Disque Dur de 80 G[/quote]

#16

C,est pas un portable, c’est un PC

[quote=“Alexandre1545”]Compaq Presario S6100NX

Intel Celeron 2.8 Ghz
256 Mb de RAM
Disque Dur de 80 G[/quote][/quote]

sa ne change pas les question,pc ou portable qui chauffe = plantage :slightly_smiling:

#17

Bonjour Alexandre1545,

Parfois lorsque les cartes sont mal enfichées dans la carte mère l’ordi. se bloque.
Vérifie aussi toutes tes connections.

Salutations.