bonjour, 
voila ,je rencontre un probleme de resolution d’ecran.j’ai donc installer le pilote nvidia de la maniere suivante
[code]# apt-get install module-assistant nvidia-kernel-common
m-a auto-install nvidia-kernel${VERSION}-source[/code]
puis j’ai installer “nvidia-xconfig” et “nvidia-settings”,jusque la ca fonctionne,ensuite je veux changer les resolutions de chaque ecran et la je remarque qu’il n’y a pas les bonnes,je vous met la liste vite fait:
640x480 320x240 pour l’ecran CRT-0,celui de gauche qui est branché sur la “nvidia gt 220”
1440x900 1360x768 1280x1024 1280x960 1152x864 1024x768 832x624 800x600 720x450 680x384 640x480 512x384 400x300 320x400 pour l’ecran NUL ,celui du milieu qui est branché sur la “nvidia gt 220”
1360x768 1152x864 1024x768 800x600 680x384 640x480 512x384 400x300 320x400 pour l’ecran CRT-1 ,celui de droite qui est branché sur la “nvidia 9500 gt”
moi je voudrais pour CRT-0:1280x1024
pour NUL:1280x800
pour CRT-1:1280x1024
ecran de droite et ecran de gauche de 17 pouces 4/3,ecran du milieu de 15 pouces 16/9
je poste mon xorg.conf
[code]# nvidia-settings: X configuration file generated by nvidia-settings
nvidia-settings: version 260.19.44 (buildmeister@swio-display-x86-rhel47-04.nvidia.com) Sun Feb 27 21:50:27 PST 2011
Section “ServerLayout”
Identifier “Layout0”
Screen 0 “Screen0” 0 0
Screen 1 “Screen1” RightOf “Screen0”
Screen 2 “Screen2” RightOf “Screen1”
InputDevice “Keyboard0” “CoreKeyboard”
InputDevice “Mouse0” “CorePointer”
Option “Xinerama” “0”
EndSection
Section “Files”
EndSection
Section “InputDevice”
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section “InputDevice”
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section “Monitor”
# HorizSync source: xconfig, VertRefresh source: xconfig
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-0"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section “Monitor”
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor1"
VendorName "Unknown"
ModelName "NUL"
HorizSync 31.0 - 63.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section “Monitor”
# HorizSync source: builtin, VertRefresh source: builtin
Identifier "Monitor2"
VendorName "Unknown"
ModelName "CRT-1"
HorizSync 28.0 - 55.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section “Device”
Identifier “Device0”
Driver “nvidia”
VendorName “NVIDIA Corporation”
BoardName “GeForce GT 220”
BusID “PCI:1:0:0”
Screen 0
EndSection
Section “Device”
Identifier “Device1”
Driver “nvidia”
VendorName “NVIDIA Corporation”
BoardName “GeForce GT 220”
BusID “PCI:1:0:0”
Screen 1
EndSection
Section “Device”
Identifier “Device2”
Driver “nvidia”
VendorName “NVIDIA Corporation”
BoardName “GeForce 9500 GT”
BusID “PCI:2:0:0”
EndSection
Section “Screen”
Identifier “Screen0”
Device “Device0”
Monitor “Monitor0”
DefaultDepth 24
Option “TwinView” “0”
Option “TwinViewXineramaInfoOrder” “CRT-0”
Option “metamodes” “CRT-0: 640x480 +0+0”
SubSection “Display”
Depth 24
EndSubSection
EndSection
Section “Screen”
Identifier “Screen1”
Device “Device1”
Monitor “Monitor1”
DefaultDepth 24
Option “TwinView” “0”
Option “metamodes” “CRT-1: 1024x768 +0+0”
SubSection “Display”
Depth 24
EndSubSection
EndSection
Section “Screen”
Identifier “Screen2”
Device “Device2”
Monitor “Monitor2”
DefaultDepth 24
Option “TwinView” “0”
Option “metamodes” “1024x768 +0+0”
SubSection “Display”
Depth 24
EndSubSection
EndSection
[/code]
voila ,j’attends sur quelqu’un qui saura me sortir de l’embarra…
@edit: j’ai mis a jour le xorg.conf du post pour des raisons de differents test,je suis aussi desormais avec le run de nvidia comme pilotes,j’ai aussi toujours les memes resolutions
