Bonjour à toutes et à tous,
Je viens d’avoir un rapsberry 3.
Savez-vous s’il y a une documentation officielle pour installer Debian, sur un pi3 avec le support ARM64 ?
Car j’ai trouvé une doc sur le wiki de debian.org, RaspberryPi3, mais non officielle et non supportée…
Ou avez-vous effectué la manip ?
Je vous remercie pour les conseils.
Bonne après-midi.
Bonjour,
d’après ton lien, ce n’est pas demain la veille qu’on aura une image d’installation officielle de Stretch pour RPi3 (et donc pas vraiment de doc officielle, parce que c’est toujours le truc qu’on fait en dernier ^^).
Tu veux vraiment installer Debian vanilla sur ton Pi 3 ? Personnellement je me satisfais très bien de Raspbian, une Debian maintenue par la fondation Raspberry Pi, il y a toute la doc nécessaire.
Salut Sputnik93,
Je te remercie pour la rapidité de la réponse.
En fait, j’ai déjà test la version. Mais un # uname -a me renvoie Linux pi 4.9.59-v7+ #1047 SMP Sun Oct 29 12:19:23 GMT 2017 armv7l GNU/Linuxsoit le même retour qu’avec un raspberry 2 …
Certains OS (Archlinux par exemple) supportent l’architecture ARMv8. J’me disais, je vais mettre Debian ARM64 (pour profiter de l’architecture 64)…
Ah, oui effectivement. Si tu testes l’installation de la version ARM64, je suis curieux de lire ton retour.
Pareil !
Quelques infos sympas ici (mais rien de spécifique à Debian) :
https://www.blaess.fr/christophe/2017/03/13/un-noyau-4-10-sur-un-raspberry-pi-3-64-bits/
Merci pour l’info 
Je teste (si je peux, avant la fin de l’année) et vous tiens informé.
Je peux déjà vous dire, que sur ArchLinux ARMv8, ça fonctionne. Par contre, je ne suis pas aller plus loin que l’installation mentionnée dans la doc :
Donc, j’ai laissé tomber.
Je verrais avec Debian.
Bonne soirée.
Bonsoir,
Je viens d’effectuer des essais.
J’ai donc suivi la procédure, du site Raspberry Pi 3, sur Archlinux ARM
Voici des retours de commandes qui peuvent nous fournir quelques infos :
# cat /proc/cpuinforenvoie[code]processor : 0
BogoMIPS : 38.40
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 1
BogoMIPS : 38.40
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 2
BogoMIPS : 38.40
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 3
BogoMIPS : 38.40
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
[/code]
# lscpurenvoieArchitecture: aarch64
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Model: 4
BogoMIPS: 38.40
Flags: fp asimd evtstrm crc32 cpuidet les premières lignes de# dmesgsont[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.4-1-ARCH (builduser@leming) (gcc version 7.2.0 (GCC)) #1 SMP Tue Dec 5 14:24:07 MST 2017
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] Machine model: Raspberry Pi 3 Model BLe retour complet est :[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.14.4-1-ARCH (builduser@leming) (gcc version 7.2.0 (GCC)) #1 SMP Tue Dec 5 14:24:07 MST 2017
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] Machine model: Raspberry Pi 3 Model B
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] cma: Reserved 64 MiB at 0x0000000037400000
[ 0.000000] On node 0 totalpages: 245760
[ 0.000000] DMA zone: 3840 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 245760 pages, LIFO batch:31
[ 0.000000] random: fast init done
[ 0.000000] percpu: Embedded 22 pages/cpu @ffff80003bf85000 s51608 r8192 d30312 u90112
[ 0.000000] pcpu-alloc: s51608 r8192 d30312 u90112 alloc=22*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 241920
[ 0.000000] Kernel command line: console=ttyS1,115200 console=tty0 root=PARTUUID=f943424b-02 rw rootwait smsc95xx.macaddr=b8:27:eb:2d:f5:ab
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Memory: 872020K/983040K available (12348K kernel code, 2290K rwdata, 5368K rodata, 1472K init, 803K bss, 45484K reserved, 65536K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
[ 0.000000] .text : 0xffff000008080000 - 0xffff000008c90000 ( 12352 KB)
[ 0.000000] .rodata : 0xffff000008c90000 - 0xffff0000091d0000 ( 5376 KB)
[ 0.000000] .init : 0xffff0000091d0000 - 0xffff000009340000 ( 1472 KB)
[ 0.000000] .data : 0xffff000009340000 - 0xffff00000957ca00 ( 2291 KB)
[ 0.000000] .bss : 0xffff00000957ca00 - 0xffff000009645898 ( 804 KB)
[ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
[ 0.000000] 0xffff7e0000000000 - 0xffff7e0000f00000 ( 15 MB actual)
[ 0.000000] memory : 0xffff800000000000 - 0xffff80003c000000 ( 960 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 44417 entries in 174 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low
[ 0.000000] arch_timer: WARNING: Please fix your firmware
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000007] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000214] Console: colour dummy device 80x25
[ 0.000795] console [tty0] enabled
[ 0.000837] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000870] pid_max: default: 32768 minimum: 301
[ 0.001175] Security Framework initialized
[ 0.001196] Yama: becoming mindful.
[ 0.001346] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.001384] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.003086] ASID allocator initialised with 65536 entries
[ 0.003204] Hierarchical SRCU implementation.
[ 0.006470] EFI services will not be available.
[ 0.006878] smp: Bringing up secondary CPUs ...
[ 0.007483] Detected VIPT I-cache on CPU1
[ 0.007543] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low
[ 0.007546] arch_timer: WARNING: Please fix your firmware
[ 0.007559] CPU1: Booted secondary processor [410fd034]
[ 0.008254] Detected VIPT I-cache on CPU2
[ 0.008287] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low
[ 0.008290] arch_timer: WARNING: Please fix your firmware
[ 0.008300] CPU2: Booted secondary processor [410fd034]
[ 0.008947] Detected VIPT I-cache on CPU3
[ 0.008979] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low
[ 0.008982] arch_timer: WARNING: Please fix your firmware
[ 0.008994] CPU3: Booted secondary processor [410fd034]
[ 0.009119] smp: Brought up 1 node, 4 CPUs
[ 0.009288] SMP: Total of 4 processors activated.
[ 0.009309] CPU features: detected feature: 32-bit EL0 Support
[ 0.009485] CPU: All CPU(s) started at EL2
[ 0.011067] devtmpfs: initialized
[ 0.017216] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017267] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 0.020656] pinctrl core: initialized pinctrl subsystem
[ 0.021724] DMI not present or invalid.
[ 0.022187] NET: Registered protocol family 16
[ 0.025435] cpuidle: using governor ladder
[ 0.025592] cpuidle: using governor menu
[ 0.026374] vdso: 2 pages (1 code @ ffff000008c95000, 1 data @ ffff000009345000)
[ 0.026405] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.028048] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.028566] Serial: AMBA PL011 UART driver
[ 0.031303] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_gpio32, deferring probe
[ 0.047476] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.048823] ACPI: Interpreter disabled.
[ 0.049725] vgaarb: loaded
[ 0.050694] SCSI subsystem initialized
[ 0.050914] libata version 3.00 loaded.
[ 0.051155] usbcore: registered new interface driver usbfs
[ 0.051233] usbcore: registered new interface driver hub
[ 0.051335] usbcore: registered new device driver usb
[ 0.051553] usb_phy_generic phy: phy supply vcc not found, using dummy regulator
[ 0.052109] EDAC MC: Ver: 3.0.0
[ 0.052433] dmi: Firmware registration failed.
[ 0.053056] Advanced Linux Sound Architecture Driver Initialized.
[ 0.053617] NetLabel: Initializing
[ 0.053634] NetLabel: domain hash size = 128
[ 0.053649] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.053747] NetLabel: unlabeled traffic allowed by default
[ 0.054248] clocksource: Switched to clocksource arch_sys_counter
[ 0.182158] VFS: Disk quotas dquot_6.6.0
[ 0.182290] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.182834] simple-framebuffer 3e7fe000.framebuffer: framebuffer at 0x3e7fe000, 0x3fc000 bytes, mapped to 0xffff000009800000
[ 0.182870] simple-framebuffer 3e7fe000.framebuffer: format=a8r8g8b8, mode=1360x768x32, linelength=5440
[ 0.208506] Console: switching to colour frame buffer device 170x48
[ 0.231773] simple-framebuffer 3e7fe000.framebuffer: fb0: simplefb registered!
[ 0.232246] pnp: PnP ACPI: disabled
[ 0.241076] NET: Registered protocol family 2
[ 0.241974] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.242356] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.242803] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.243273] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.243545] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.244090] NET: Registered protocol family 1
[ 0.244947] RPC: Registered named UNIX socket transport module.
[ 0.245182] RPC: Registered udp transport module.
[ 0.245366] RPC: Registered tcp transport module.
[ 0.245550] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.245803] PCI: CLS 0 bytes, default 128
[ 0.246005] Unpacking initramfs...
[ 0.609288] Freeing initrd memory: 4696K
[ 0.610334] kvm [1]: 8-bit VMID
[ 0.610476] kvm [1]: IDMAP page: 1c80000
[ 0.610634] kvm [1]: HYP VA range: 800000000000:ffffffffffff
[ 0.619037] kvm [1]: Invalid trigger for IRQ4, assuming level low
[ 0.625939] kvm [1]: virtual timer IRQ4
[ 0.632790] kvm [1]: Hyp mode initialized successfully
[ 0.721447] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 0.735544] zbud: loaded
[ 0.745868] NFS: Registering the id_resolver key type
[ 0.752952] Key type id_resolver registered
[ 0.760081] Key type id_legacy registered
[ 0.767044] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 0.774289] SGI XFS with ACLs, security attributes, no debug enabled
[ 0.806427] NET: Registered protocol family 38
[ 0.813769] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[ 0.821271] io scheduler noop registered
[ 0.828471] io scheduler deadline registered
[ 0.836042] io scheduler cfq registered (default)
[ 0.843196] io scheduler mq-deadline registered
[ 0.850323] io scheduler kyber registered
[ 0.857541] io scheduler bfq registered
[ 0.864773] atomic64_test: passed
[ 0.878216] ipmi message handler version 39.2
[ 0.893648] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.902288] console [ttyS1] disabled
[ 0.909005] 3f215040.serial: ttyS1 at MMIO 0x0 (irq = 61, base_baud = 31250000) is a 16550
[ 1.748217] console [ttyS1] enabled
[ 1.759395] msm_serial: driver initialized
[ 2.591273] bcm2835-rng 3f104000.rng: hwrng registered
[ 2.604106] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 2.620080] libphy: Fixed MDIO Bus: probed
[ 2.632784] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.646062] ehci-pci: EHCI PCI platform driver
[ 2.657160] ehci-platform: EHCI generic platform driver
[ 2.669126] ehci-orion: EHCI orion driver
[ 2.679735] ehci-msm: Qualcomm On-Chip EHCI Host Controller
[ 2.691940] tegra-ehci: Tegra EHCI driver
[ 2.702673] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.715514] ohci-pci: OHCI PCI platform driver
[ 2.726706] ohci-platform: OHCI generic platform driver
[ 2.738805] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.752512] usbcore: registered new interface driver uas
[ 2.764710] usbcore: registered new interface driver usb-storage
[ 2.777556] usbcore: registered new interface driver ums-alauda
[ 2.790296] usbcore: registered new interface driver ums-cypress
[ 2.803041] usbcore: registered new interface driver ums-datafab
[ 2.815685] usbcore: registered new interface driver ums_eneub6250
[ 2.828424] usbcore: registered new interface driver ums-freecom
[ 2.840913] usbcore: registered new interface driver ums-isd200
[ 2.853166] usbcore: registered new interface driver ums-jumpshot
[ 2.865453] usbcore: registered new interface driver ums-karma
[ 2.877383] usbcore: registered new interface driver ums-onetouch
[ 2.889498] usbcore: registered new interface driver ums-realtek
[ 2.901482] usbcore: registered new interface driver ums-sddr09
[ 2.913262] usbcore: registered new interface driver ums-sddr55
[ 2.924834] usbcore: registered new interface driver ums-usbat
[ 2.936248] usbcore: registered new interface driver usbserial
[ 2.947405] usbcore: registered new interface driver usbserial_generic
[ 2.959118] usbserial: USB Serial support registered for generic
[ 2.971770] mousedev: PS/2 mouse device common for all mice
[ 2.985802] device-mapper: uevent: version 1.0.3
[ 2.996126] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
[ 3.011137] sdhci: Secure Digital Host Controller Interface driver
[ 3.023061] sdhci: Copyright(c) Pierre Ossman
[ 3.033722] Synopsys Designware Multimedia Card Interface Driver
[ 3.184303] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1)
[ 3.196430] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.274329] mmc1: SDHCI controller on 3f300000.sdhci [3f300000.sdhci] using PIO
[ 3.291859] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.303938] dmi-sysfs: dmi entry is absent.
[ 3.311074] mmc0: host does not support reading read-only switch, assuming write-enable
[ 3.312963] mmc0: new high speed SDHC card at address 59b4
[ 3.313453] bounce: isa pool size: 16 pages
[ 3.313594] mmcblk0: mmc0:59b4 USD 14.7 GiB
[ 3.360364] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.361136] mmcblk0: p1 p2
[ 3.380312] usbcore: registered new interface driver usbhid
[ 3.391739] usbhid: USB HID core driver
[ 3.402285] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 3.409834] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 3.411530] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.413224] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.416281] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 3.461083] drop_monitor: Initializing network drop monitor service
[ 3.473108] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.483961] Initializing XFRM netlink socket
[ 3.494594] NET: Registered protocol family 10
[ 3.514966] mmc1: new high speed SDIO card at address 0001
[ 3.528093] Segment Routing with IPv6
[ 3.537786] mip6: Mobile IPv6
[ 3.546614] NET: Registered protocol family 17
[ 3.557263] Key type dns_resolver registered
[ 3.568539] registered taskstats version 1
[ 3.578926] zswap: loaded using pool lzo/zbud
[ 3.599145] Key type big_key registered
[ 3.618104] Key type encrypted registered
[ 3.632122] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 72, base_baud = 0) is a PL011 rev2
[ 3.650833] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-12-01 16:16
[ 3.667382] OF: /soc/usb@7e980000: could not get #phy-cells for /phy
[ 3.680935] dwc2 3f980000.usb: 3f980000.usb supply vusb_d not found, using dummy regulator
[ 3.696714] dwc2 3f980000.usb: 3f980000.usb supply vusb_a not found, using dummy regulator
[ 3.763131] dwc2 3f980000.usb: DWC OTG Controller
[ 3.775181] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1
[ 3.789457] dwc2 3f980000.usb: irq 41, io mem 0x3f980000
[ 3.802042] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.815900] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.830196] usb usb1: Product: DWC OTG Controller
[ 3.841862] usb usb1: Manufacturer: Linux 4.14.4-1-ARCH dwc2_hsotg
[ 3.855052] usb usb1: SerialNumber: 3f980000.usb
[ 3.867142] hub 1-0:1.0: USB hub found
[ 3.877689] hub 1-0:1.0: 1 port detected
[ 3.889712] hctosys: unable to open rtc device (rtc0)
[ 3.901626] ALSA device list:
[ 3.911039] No soundcards found.
[ 3.924942] Freeing unused kernel memory: 1472K
[ 4.324328] usb 1-1: new high-speed USB device number 2 using dwc2
[ 4.584719] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 4.597838] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.612212] hub 1-1:1.0: USB hub found
[ 4.622617] hub 1-1:1.0: 5 ports detected
[ 4.954349] usb 1-1.1: new high-speed USB device number 3 using dwc2
[ 5.104649] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 5.118497] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.147371] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.444298] usb 1-1.4: new low-speed USB device number 4 using dwc2
[ 5.600816] usb 1-1.4: New USB device found, idVendor=04fc, idProduct=05d8
[ 5.615056] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.629667] usb 1-1.4: Product: Trust Keyboard 14909
[ 5.641870] usb 1-1.4: Manufacturer: MLK
[ 5.831455] systemd[1]: System time before build time, advancing clock.
[ 5.880566] systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 5.917603] systemd[1]: Detected architecture arm64.
[ 5.955955] systemd[1]: Set hostname to <alarm>.
[ 6.259095] random: crng init done
[ 6.464225] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 6.490806] systemd[1]: Created slice System Slice.
[ 6.515529] systemd[1]: Mounting POSIX Message Queue File System...
[ 6.539725] systemd[1]: Created slice system-getty.slice.
[ 6.561958] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 6.585007] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 6.610454] systemd[1]: Listening on udev Control Socket.
[ 7.180961] systemd-journald[248]: Received request to flush runtime journal from PID 1
[ 7.225624] systemd-journald[248]: File /var/log/journal/45fee1e6d1cd441b965d76fd0c400a69/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 8.448346] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 8.480922] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property
[ 8.645937] input: MLK Trust Keyboard 14909 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:04FC:05D8.0001/input/input0
[ 8.735347] sunplus 0003:04FC:05D8.0001: input,hidraw0: USB HID v1.00 Keyboard [MLK Trust Keyboard 14909] on usb-3f980000.usb-1.4/input0
[ 8.756270] sunplus 0003:04FC:05D8.0002: fixing up Sunplus Wireless Desktop report descriptor
[ 8.779426] input: MLK Trust Keyboard 14909 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:04FC:05D8.0002/input/input1
[ 8.833102] smsc95xx v1.0.6
[ 8.865274] sunplus 0003:04FC:05D8.0002: input,hiddev96,hidraw1: USB HID v1.00 Mouse [MLK Trust Keyboard 14909] on usb-3f980000.usb-1.4/input1
[ 8.957099] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2d:f5:ab
[ 8.959670] usbcore: registered new interface driver smsc95xx
[ 9.064429] Registered IR keymap rc-cec
[ 9.082743] rc rc0: RC for vc4 as /devices/platform/soc/3f902000.hdmi/rc/rc0
[ 9.083039] input: RC for vc4 as /devices/platform/soc/3f902000.hdmi/rc/rc0/input2
[ 9.128341] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[ 9.128386] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok
[ 9.128413] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name!
[ 9.129629] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[ 9.130056] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4])
[ 9.130237] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 9.130576] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 9.130839] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 9.131131] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 9.142460] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 9.143040] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.182019] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[ 9.182034] checking generic (3e7fe000 3fc000) vs hw (0 ffffffffffffffff)
[ 9.182040] fb: switching to vc4drmfb from simple
[ 9.348971] Console: switching to colour dummy device 80x25
[ 9.349125] usbcore: registered new interface driver brcmfmac
[ 9.369268] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[ 9.376126] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.382881] [drm] Driver supports precise vblank timestamp query.
[ 9.440084] Console: switching to colour frame buffer device 170x48
[ 9.490244] vc4-drm soc:gpu: fb0: frame buffer device
[ 9.526119] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Aug 7 2017 00:46:29 version 7.45.41.46 (r666254 CY) FWID 01-f8a78378
[ 10.608281] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.616261] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1Les essais suivants sont pour DebianJ’ai donc suivi la procédure, que j’ai mentionnée plus haut.
[code]processor : 0
BogoMIPS : 38.40
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 1
BogoMIPS : 38.40
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 2
BogoMIPS : 38.40
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4
processor : 3
BogoMIPS : 38.40
Features : fp asimd evtstrm crc32 cpuid
CPU implementer : 0x41
CPU architecture: 8
CPU variant : 0x0
CPU part : 0xd03
CPU revision : 4[/code]
Architecture: aarch64
Byte Order: Little Endian
CPU(s): 4
On-line CPU(s) list: 0-3
Thread(s) per core: 1
Core(s) per socket: 4
Socket(s): 1
Model: 4
BogoMIPS: 38.40
Flags: fp asimd evtstrm crc32 cpuid
[code][ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] random: get_random_bytes called from start_kernel+0x50/0x404 with crng_init=0
[ 0.000000] Linux version 4.13.0-1-arm64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170920 (Debian 6.4.0-7)) #1 SMP Debian 4.13.4-1 (2017-10-01)
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2[/code]
Le retour complet est :[code][ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] random: get_random_bytes called from start_kernel+0x50/0x404 with crng_init=0
[ 0.000000] Linux version 4.13.0-1-arm64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170920 (Debian 6.4.0-7)) #1 SMP Debian 4.13.4-1 (2017-10-01)
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] On node 0 totalpages: 242688
[ 0.000000] DMA zone: 3792 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 242688 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 25 pages/cpu @ffff9257bb379000 s63384 r8192 d30824 u102400
[ 0.000000] pcpu-alloc: s63384 r8192 d30824 u102400 alloc=25*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 238896
[ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 bcm2708_fb.fbwidth=1360 bcm2708_fb.fbheight=768 bcm2708_fb.fbswap=1 dma.dmachans=0x7f35 bcm2709.boardrev=0xa02082 bcm2709.serial=0x542df5ab bcm2709.uart_clock=48000000 smsc95xx.macaddr=B8:27:EB:2D:F5:AB vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 root=/dev/mmcblk0p2 rw elevator=deadline fsck.repair=yes net.ifnames=0 rootwait
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Memory: 918104K/970752K available (7740K kernel code, 1406K rwdata, 2580K rodata, 4288K init, 608K bss, 52648K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
[ 0.000000] .text : 0xffff0a533a880000 - 0xffff0a533b010000 ( 7744 KB)
[ 0.000000] .rodata : 0xffff0a533b010000 - 0xffff0a533b2a0000 ( 2624 KB)
[ 0.000000] .init : 0xffff0a533b2a0000 - 0xffff0a533b6d0000 ( 4288 KB)
[ 0.000000] .data : 0xffff0a533b6d0000 - 0xffff0a533b82fa00 ( 1407 KB)
[ 0.000000] .bss : 0xffff0a533b82fa00 - 0xffff0a533b8c7b90 ( 609 KB)
[ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
[ 0.000000] 0xffff7e495e000000 - 0xffff7e495eed0000 ( 14 MB actual)
[ 0.000000] memory : 0xffff925780000000 - 0xffff9257bb400000 ( 948 MB)
[ 0.000000] ftrace: allocating 29376 entries in 115 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low
[ 0.000000] arch_timer: WARNING: Please fix your firmware
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000550] Console: colour dummy device 80x25
[ 0.000583] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.000599] pid_max: default: 32768 minimum: 301
[ 0.000871] Security Framework initialized
[ 0.000883] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000918] AppArmor: AppArmor disabled by boot time parameter
[ 0.001016] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.001042] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.002530] ASID allocator initialised with 65536 entries
[ 0.002639] Hierarchical SRCU implementation.
[ 0.004665] EFI services will not be available.
[ 0.005001] smp: Bringing up secondary CPUs ...
[ 0.005657] Detected VIPT I-cache on CPU1
[ 0.005711] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low
[ 0.005714] arch_timer: WARNING: Please fix your firmware
[ 0.005728] CPU1: Booted secondary processor [410fd034]
[ 0.006481] Detected VIPT I-cache on CPU2
[ 0.006515] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low
[ 0.006518] arch_timer: WARNING: Please fix your firmware
[ 0.006528] CPU2: Booted secondary processor [410fd034]
[ 0.007226] Detected VIPT I-cache on CPU3
[ 0.007258] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low
[ 0.007260] arch_timer: WARNING: Please fix your firmware
[ 0.007271] CPU3: Booted secondary processor [410fd034]
[ 0.007390] smp: Brought up 1 node, 4 CPUs
[ 0.007440] SMP: Total of 4 processors activated.
[ 0.007451] CPU features: detected feature: 32-bit EL0 Support
[ 0.007653] CPU: All CPU(s) started at EL2
[ 0.007683] alternatives: patching kernel code
[ 0.009032] devtmpfs: initialized
[ 0.014689] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.014713] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 0.015050] pinctrl core: initialized pinctrl subsystem
[ 0.015872] DMI not present or invalid.
[ 0.016288] NET: Registered protocol family 16
[ 0.019505] cpuidle: using governor ladder
[ 0.019646] cpuidle: using governor menu
[ 0.020284] vdso: 2 pages (1 code @ ffff0a533b016000, 1 data @ ffff0a533b6d5000)
[ 0.020306] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.020763] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.020994] Serial: AMBA PL011 UART driver
[ 0.034126] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.035277] ACPI: Interpreter disabled.
[ 0.035721] vgaarb: loaded
[ 0.036004] EDAC MC: Ver: 3.0.0
[ 0.036369] dmi: Firmware registration failed.
[ 0.037690] clocksource: Switched to clocksource arch_sys_counter
[ 0.107296] VFS: Disk quotas dquot_6.6.0
[ 0.107393] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.108284] simple-framebuffer 3e9fc000.framebuffer: framebuffer at 0x3e9fc000, 0x1fe000 bytes, mapped to 0xffff000008200000
[ 0.108300] simple-framebuffer 3e9fc000.framebuffer: format=r5g6b5, mode=1360x768x16, linelength=2720
[ 0.121768] Console: switching to colour frame buffer device 170x48
[ 0.134559] simple-framebuffer 3e9fc000.framebuffer: fb0: simplefb registered!
[ 0.134612] pnp: PnP ACPI: disabled
[ 0.144294] NET: Registered protocol family 2
[ 0.145106] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.145223] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.145441] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.145653] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.145741] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.145997] NET: Registered protocol family 1
[ 0.146034] PCI: CLS 0 bytes, default 128
[ 0.146271] Unpacking initramfs...
[ 1.663846] Freeing initrd memory: 17444K
[ 1.669035] kvm [1]: 8-bit VMID
[ 1.669050] kvm [1]: IDMAP page: 7f8000
[ 1.669059] kvm [1]: HYP VA range: 800000000000:ffffffffffff
[ 1.669919] kvm [1]: Hyp mode initialized successfully
[ 1.669959] kvm [1]: Invalid trigger for IRQ4, assuming level low
[ 1.669985] kvm [1]: virtual timer IRQ4
[ 1.672200] audit: initializing netlink subsys (disabled)
[ 1.672370] audit: type=2000 audit(1.670:1): state=initialized audit_enabled=0 res=1
[ 1.672916] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 1.673100] zbud: loaded
[ 3.817532] random: fast init done
[ 3.820101] Key type asymmetric registered
[ 3.820114] Asymmetric key parser 'x509' registered
[ 3.820230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 3.820371] io scheduler noop registered
[ 3.820381] io scheduler deadline registered (default)
[ 3.820432] io scheduler cfq registered
[ 3.820441] io scheduler mq-deadline registered
[ 3.833224] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.834863] console [ttyS0] disabled
[ 3.834929] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 61, base_baud = 31250000) is a 16550
[ 4.596978] console [ttyS0] enabled
[ 4.601123] Serial: AMBA driver
[ 4.604616] msm_serial: driver initialized
[ 4.609253] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 4.615956] mousedev: PS/2 mouse device common for all mice
[ 4.623199] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.629321] dmi-sysfs: dmi entry is absent.
[ 4.633989] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 4.640056] NET: Registered protocol family 10
[ 4.645519] Segment Routing with IPv6
[ 4.649310] mip6: Mobile IPv6
[ 4.652335] NET: Registered protocol family 17
[ 4.656863] mpls_gso: MPLS GSO support
[ 4.661057] Registered cp15_barrier emulation handler
[ 4.666200] Registered setend emulation handler
[ 4.671533] registered taskstats version 1
[ 4.675779] zswap: loaded using pool lzo/zbud
[ 4.680386] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 4.690523] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 72, base_baud = 0) is a PL011 rev2
[ 7.218357] console [ttyAMA0] enabled
[ 7.234299] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-10-06 13:56
[ 7.267506] hctosys: unable to open rtc device (rtc0)
[ 7.287895] PM: Hibernation image not present or could not be loaded.
[ 7.295042] Freeing unused kernel memory: 4288K
[ 7.648684] sdhci: Secure Digital Host Controller Interface driver
[ 7.673579] sdhci: Copyright(c) Pierre Ossman
[ 7.679735] usbcore: registered new interface driver usbfs
[ 7.679803] usbcore: registered new interface driver hub
[ 7.679975] usbcore: registered new device driver usb
[ 7.755916] sdhci-pltfm: SDHCI platform and OF driver helper
[ 7.757783] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1)
[ 7.758347] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property
[ 7.786831] OF: /soc/usb@7e980000: could not get #phy-cells for /phy
[ 7.786890] dwc2 3f980000.usb: 3f980000.usb supply vusb_d not found, using dummy regulator
[ 7.786986] dwc2 3f980000.usb: 3f980000.usb supply vusb_a not found, using dummy regulator
[ 7.837508] dwc2 3f980000.usb: DWC OTG Controller
[ 7.837562] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1
[ 7.837605] dwc2 3f980000.usb: irq 41, io mem 0x3f980000
[ 7.837962] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.837971] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.837977] usb usb1: Product: DWC OTG Controller
[ 7.837984] usb usb1: Manufacturer: Linux 4.13.0-1-arm64 dwc2_hsotg
[ 7.837990] usb usb1: SerialNumber: 3f980000.usb
[ 7.838768] hub 1-0:1.0: USB hub found
[ 7.838819] hub 1-0:1.0: 1 port detected
[ 7.852602] mmc0: host does not support reading read-only switch, assuming write-enable
[ 7.854499] mmc0: new high speed SDHC card at address 59b4
[ 7.854986] bounce: isa pool size: 16 pages
[ 7.855177] mmcblk0: mmc0:59b4 USD 14.7 GiB
[ 7.857248] mmcblk0: p1 p2
[ 8.225723] usb 1-1: new high-speed USB device number 2 using dwc2
[ 8.313793] mmc1: SDHCI controller on 3f300000.sdhci [3f300000.sdhci] using PIO
[ 8.366808] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 8.391782] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 8.415619] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 8.438033] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 8.440851] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 8.487003] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.516551] hub 1-1:1.0: USB hub found
[ 8.531791] hub 1-1:1.0: 5 ports detected
[ 8.542376] mmc1: new high speed SDIO card at address 0001
[ 8.575962] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.861743] usb 1-1.1: new high-speed USB device number 3 using dwc2
[ 8.986073] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 9.013701] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9.242019] systemd[1]: System time before build time, advancing clock.
[ 9.269730] usb 1-1.4: new low-speed USB device number 4 using dwc2
[ 9.404470] usb 1-1.4: New USB device found, idVendor=04fc, idProduct=05d8
[ 9.413169] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.453375] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.482700] usb 1-1.4: Product: Trust Keyboard 14909
[ 9.502604] usb 1-1.4: Manufacturer: MLK
[ 9.520128] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 9.603668] systemd[1]: Detected architecture arm64.
[ 9.646804] systemd[1]: Set hostname to <rpi3>.
[ 9.762731] uart-pl011 3f201000.serial: no DMA platform data
[ 10.072180] systemd[1]: Created slice User and Session Slice.
[ 10.110157] systemd[1]: Listening on Journal Socket.
[ 10.146622] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 10.202711] systemd[1]: Created slice System Slice.
[ 10.244253] systemd[1]: Starting Load Kernel Modules...
[ 10.277160] random: crng init done
[ 10.295094] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 10.354073] systemd[1]: Mounting Huge Pages File System...
[ 10.883603] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 10.939242] EXT4-fs (mmcblk0p2): resizing filesystem from 179200 to 3783424 blocks
[ 11.712561] EXT4-fs (mmcblk0p2): resized filesystem to 3783424
[ 12.334240] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 12.487670] systemd-journald[177]: Received request to flush runtime journal from PID 1
[ 12.755373] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 12.783271] bcm2835-rng 3f104000.rng: hwrng registered
[ 13.050935] hidraw: raw HID events driver (C) Jiri Kosina
[ 13.154671] smsc95xx: unknown parameter 'macaddr' ignored
[ 13.178728] smsc95xx v1.0.6
[ 13.185158] usbcore: registered new interface driver usbhid
[ 13.185165] usbhid: USB HID core driver
[ 13.216891] input: MLK Trust Keyboard 14909 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:04FC:05D8.0001/input/input0
[ 13.249444] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok
[ 13.249465] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name!
[ 13.250583] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[ 13.250854] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4])
[ 13.250980] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 13.251344] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 13.251597] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 13.251852] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 13.251953] vc4-drm soc:gpu: Cannot do DMA to address 0x0000000000000000
[ 13.251961] swiotlb: coherent allocation failed for device soc:gpu size=16777216
[ 13.251975] CPU: 0 PID: 207 Comm: systemd-udevd Not tainted 4.13.0-1-arm64 #1 Debian 4.13.4-1
[ 13.251978] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 13.251985] Call trace:
[ 13.252013] [<ffff0a533a88a590>] dump_backtrace+0x0/0x2a0
[ 13.252025] [<ffff0a533a88a8a4>] show_stack+0x24/0x30
[ 13.252040] [<ffff0a533afdb134>] dump_stack+0x98/0xbc
[ 13.252052] [<ffff0a533ac21364>] swiotlb_alloc_coherent+0x17c/0x190
[ 13.252062] [<ffff0a533a89c5c0>] __dma_alloc+0x78/0x160
[ 13.252258] [<ffff03b38225910c>] drm_gem_cma_create+0xac/0x138 [drm]
[ 13.252345] [<ffff03b38246d714>] vc4_bo_create+0x104/0x160 [vc4]
[ 13.252432] [<ffff03b38247cbac>] vc4_allocate_bin_bo+0x9c/0x198 [vc4]
[ 13.252518] [<ffff03b38247ce60>] vc4_v3d_bind+0x100/0x288 [vc4]
[ 13.252532] [<ffff0a533adbbbe8>] component_bind_all+0x140/0x2c8
[ 13.252618] [<ffff03b38246fdac>] vc4_drm_bind+0x84/0x168 [vc4]
[ 13.252628] [<ffff0a533adbb770>] try_to_bring_up_master+0x290/0x2e0
[ 13.252637] [<ffff0a533adbba54>] component_master_add_with_match+0xb4/0x108
[ 13.252722] [<ffff03b38246ff60>] vc4_platform_drm_probe+0xd0/0x130 [vc4]
[ 13.252734] [<ffff0a533adc5b20>] platform_drv_probe+0x60/0xc8
[ 13.252742] [<ffff0a533adc31e4>] driver_probe_device+0x2e4/0x460
[ 13.252749] [<ffff0a533adc3484>] __driver_attach+0x124/0x128
[ 13.252756] [<ffff0a533adc08f0>] bus_for_each_dev+0x88/0xe8
[ 13.252763] [<ffff0a533adc28d0>] driver_attach+0x30/0x40
[ 13.252770] [<ffff0a533adc2268>] bus_add_driver+0x1f8/0x2b0
[ 13.252777] [<ffff0a533adc4238>] driver_register+0x68/0x100
[ 13.252785] [<ffff0a533adc5a44>] __platform_driver_register+0x54/0x60
[ 13.252872] [<ffff03b382496034>] vc4_drm_register+0x34/0x58 [vc4]
[ 13.252881] [<ffff0a533a88399c>] do_one_initcall+0x5c/0x168
[ 13.252890] [<ffff0a533a96ef58>] do_init_module+0x64/0x1cc
[ 13.252897] [<ffff0a533a96ddac>] load_module+0x2074/0x2718
[ 13.252903] [<ffff0a533a96e778>] SyS_finit_module+0x128/0x140
[ 13.252911] [<ffff0a533a88378c>] __sys_trace_return+0x0/0x4
[ 13.252943] vc4-drm soc:gpu: failed to allocate buffer with size 16777216
[ 13.252999] vc4-drm soc:gpu: Cannot do DMA to address 0x0000000000000000
[ 13.253005] swiotlb: coherent allocation failed for device soc:gpu size=16777216
[ 13.253013] CPU: 0 PID: 207 Comm: systemd-udevd Not tainted 4.13.0-1-arm64 #1 Debian 4.13.4-1
[ 13.253017] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 13.253020] Call trace:
[ 13.253031] [<ffff0a533a88a590>] dump_backtrace+0x0/0x2a0
[ 13.253040] [<ffff0a533a88a8a4>] show_stack+0x24/0x30
[ 13.253051] [<ffff0a533afdb134>] dump_stack+0x98/0xbc
[ 13.253061] [<ffff0a533ac21364>] swiotlb_alloc_coherent+0x17c/0x190
[ 13.253070] [<ffff0a533a89c5c0>] __dma_alloc+0x78/0x160
[ 13.253228] [<ffff03b38225910c>] drm_gem_cma_create+0xac/0x138 [drm]
[ 13.253313] [<ffff03b38246d738>] vc4_bo_create+0x128/0x160 [vc4]
[ 13.253398] [<ffff03b38247cbac>] vc4_allocate_bin_bo+0x9c/0x198 [vc4]
[ 13.253484] [<ffff03b38247ce60>] vc4_v3d_bind+0x100/0x288 [vc4]
[ 13.253494] [<ffff0a533adbbbe8>] component_bind_all+0x140/0x2c8
[ 13.253578] [<ffff03b38246fdac>] vc4_drm_bind+0x84/0x168 [vc4]
[ 13.253588] [<ffff0a533adbb770>] try_to_bring_up_master+0x290/0x2e0
[ 13.253596] [<ffff0a533adbba54>] component_master_add_with_match+0xb4/0x108
[ 13.253681] [<ffff03b38246ff60>] vc4_platform_drm_probe+0xd0/0x130 [vc4]
[ 13.253693] [<ffff0a533adc5b20>] platform_drv_probe+0x60/0xc8
[ 13.253701] [<ffff0a533adc31e4>] driver_probe_device+0x2e4/0x460
[ 13.253709] [<ffff0a533adc3484>] __driver_attach+0x124/0x128
[ 13.253716] [<ffff0a533adc08f0>] bus_for_each_dev+0x88/0xe8
[ 13.253723] [<ffff0a533adc28d0>] driver_attach+0x30/0x40
[ 13.253730] [<ffff0a533adc2268>] bus_add_driver+0x1f8/0x2b0
[ 13.253737] [<ffff0a533adc4238>] driver_register+0x68/0x100
[ 13.253745] [<ffff0a533adc5a44>] __platform_driver_register+0x54/0x60
[ 13.253831] [<ffff03b382496034>] vc4_drm_register+0x34/0x58 [vc4]
[ 13.253839] [<ffff0a533a88399c>] do_one_initcall+0x5c/0x168
[ 13.253847] [<ffff0a533a96ef58>] do_init_module+0x64/0x1cc
[ 13.253854] [<ffff0a533a96ddac>] load_module+0x2074/0x2718
[ 13.253860] [<ffff0a533a96e778>] SyS_finit_module+0x128/0x140
[ 13.253868] [<ffff0a533a88378c>] __sys_trace_return+0x0/0x4
[ 13.253926] vc4-drm soc:gpu: failed to allocate buffer with size 16777216
[ 13.254023] [drm:vc4_bo_create [vc4]] *ERROR* Failed to allocate from CMA:
[ 13.254034] [drm] num bos allocated: 0
[ 13.254037] [drm] size bos allocated: 0kb
[ 13.254039] [drm] num bos used: 0
[ 13.254042] [drm] size bos used: 0kb
[ 13.254044] [drm] num bos cached: 0
[ 13.254047] [drm] size bos cached: 0kb
[ 13.254058] vc4_v3d 3fc00000.v3d: Failed to allocate memory for tile binning: -12. You may need to enable CMA or give it more memory.
[ 13.254174] vc4-drm soc:gpu: failed to bind 3fc00000.v3d (ops vc4_v3d_ops [vc4]): -12
[ 13.257090] vc4-drm soc:gpu: master bind failed: -12
[ 13.257157] vc4-drm: probe of soc:gpu failed with error -12
[ 13.282707] sunplus 0003:04FC:05D8.0001: input,hidraw0: USB HID v1.00 Keyboard [MLK Trust Keyboard 14909] on usb-3f980000.usb-1.4/input0
[ 13.282807] sunplus 0003:04FC:05D8.0002: fixing up Sunplus Wireless Desktop report descriptor
[ 13.289106] input: MLK Trust Keyboard 14909 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:04FC:05D8.0002/input/input1
[ 13.358390] sunplus 0003:04FC:05D8.0002: input,hiddev0,hidraw1: USB HID v1.00 Mouse [MLK Trust Keyboard 14909] on usb-3f980000.usb-1.4/input1
[ 15.599610] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2d:f5:ab
[ 15.646622] usbcore: registered new interface driver smsc95xx
[ 16.439420] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.861477] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 16.890036] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.319357] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.345975] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1[/code]C'est un plus long.
Conclusion
----------
Les deux OS reconnaissent le raspberry correctement.
Par contre, sous ArchLinux, la carte son n'est pas reconnu. Et sous Debian, le fichier /boot/config.txt est complètement différent. Il est déjà beaucoup plus long. Il faut un peu plus de 7000 lignes.
Il y a bien un partition de boot, mais je n'ai pas encore eu le temps de regarder.
Quelques infos :
[url=https://unix.stackexchange.com/questions/43539/what-do-the-flags-in-proc-cpuinfo-mean]Explication des flags de lscpu[/url]
[url=https://en.wikipedia.org/wiki/ARM_architecture#64/32-bit_architecture]ARMv8-A & AArch64 sur wikipedia[/url]
[url=https://en.wikipedia.org/wiki/Comparison_of_ARMv8-A_cores]Comparaison des ARMv8-A sur wikipedia[/url]
[url=https://en.wikipedia.org/wiki/ARM_Cortex-A53]Un petit détail de l'ARM Cortex-A53 sur wikipedia[/url]
[url=https://en.wikipedia.org/wiki/Raspberry_Pi#Specifications]Spécifications des différents rasp... encore sur wikipedia[/url]
Je reviens vers vous concernant le fichier de boot et la reconnaissance de la carte.
Bonne journée.[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] random: get_random_bytes called from start_kernel+0x50/0x404 with crng_init=0
[ 0.000000] Linux version 4.13.0-1-arm64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170920 (Debian 6.4.0-7)) #1 SMP Debian 4.13.4-1 (2017-10-01)
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
Le retour complet est :[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] random: get_random_bytes called from start_kernel+0x50/0x404 with crng_init=0
[ 0.000000] Linux version 4.13.0-1-arm64 (debian-kernel@lists.debian.org) (gcc version 6.4.0 20170920 (Debian 6.4.0-7)) #1 SMP Debian 4.13.4-1 (2017-10-01)
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] On node 0 totalpages: 242688
[ 0.000000] DMA zone: 3792 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 242688 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 25 pages/cpu @ffff9257bb379000 s63384 r8192 d30824 u102400
[ 0.000000] pcpu-alloc: s63384 r8192 d30824 u102400 alloc=25*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 238896
[ 0.000000] Kernel command line: earlyprintk console=ttyAMA0 bcm2708_fb.fbwidth=1360 bcm2708_fb.fbheight=768 bcm2708_fb.fbswap=1 dma.dmachans=0x7f35 bcm2709.boardrev=0xa02082 bcm2709.serial=0x542df5ab bcm2709.uart_clock=48000000 smsc95xx.macaddr=B8:27:EB:2D:F5:AB vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 root=/dev/mmcblk0p2 rw elevator=deadline fsck.repair=yes net.ifnames=0 rootwait
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Memory: 918104K/970752K available (7740K kernel code, 1406K rwdata, 2580K rodata, 4288K init, 608K bss, 52648K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffff000000000000 - 0xffff000008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffff000008000000 - 0xffff7dffbfff0000 (129022 GB)
[ 0.000000] .text : 0xffff0a533a880000 - 0xffff0a533b010000 ( 7744 KB)
[ 0.000000] .rodata : 0xffff0a533b010000 - 0xffff0a533b2a0000 ( 2624 KB)
[ 0.000000] .init : 0xffff0a533b2a0000 - 0xffff0a533b6d0000 ( 4288 KB)
[ 0.000000] .data : 0xffff0a533b6d0000 - 0xffff0a533b82fa00 ( 1407 KB)
[ 0.000000] .bss : 0xffff0a533b82fa00 - 0xffff0a533b8c7b90 ( 609 KB)
[ 0.000000] fixed : 0xffff7dfffe7fd000 - 0xffff7dfffec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffff7dfffee00000 - 0xffff7dffffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffff7e0000000000 - 0xffff800000000000 ( 2048 GB maximum)
[ 0.000000] 0xffff7e495e000000 - 0xffff7e495eed0000 ( 14 MB actual)
[ 0.000000] memory : 0xffff925780000000 - 0xffff9257bb400000 ( 948 MB)
[ 0.000000] ftrace: allocating 29376 entries in 115 pages
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low
[ 0.000000] arch_timer: WARNING: Please fix your firmware
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000550] Console: colour dummy device 80x25
[ 0.000583] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[ 0.000599] pid_max: default: 32768 minimum: 301
[ 0.000871] Security Framework initialized
[ 0.000883] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000918] AppArmor: AppArmor disabled by boot time parameter
[ 0.001016] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.001042] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.002530] ASID allocator initialised with 65536 entries
[ 0.002639] Hierarchical SRCU implementation.
[ 0.004665] EFI services will not be available.
[ 0.005001] smp: Bringing up secondary CPUs ...
[ 0.005657] Detected VIPT I-cache on CPU1
[ 0.005711] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low
[ 0.005714] arch_timer: WARNING: Please fix your firmware
[ 0.005728] CPU1: Booted secondary processor [410fd034]
[ 0.006481] Detected VIPT I-cache on CPU2
[ 0.006515] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low
[ 0.006518] arch_timer: WARNING: Please fix your firmware
[ 0.006528] CPU2: Booted secondary processor [410fd034]
[ 0.007226] Detected VIPT I-cache on CPU3
[ 0.007258] arch_timer: WARNING: Invalid trigger for IRQ2, assuming level low
[ 0.007260] arch_timer: WARNING: Please fix your firmware
[ 0.007271] CPU3: Booted secondary processor [410fd034]
[ 0.007390] smp: Brought up 1 node, 4 CPUs
[ 0.007440] SMP: Total of 4 processors activated.
[ 0.007451] CPU features: detected feature: 32-bit EL0 Support
[ 0.007653] CPU: All CPU(s) started at EL2
[ 0.007683] alternatives: patching kernel code
[ 0.009032] devtmpfs: initialized
[ 0.014689] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.014713] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 0.015050] pinctrl core: initialized pinctrl subsystem
[ 0.015872] DMI not present or invalid.
[ 0.016288] NET: Registered protocol family 16
[ 0.019505] cpuidle: using governor ladder
[ 0.019646] cpuidle: using governor menu
[ 0.020284] vdso: 2 pages (1 code @ ffff0a533b016000, 1 data @ ffff0a533b6d5000)
[ 0.020306] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.020763] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.020994] Serial: AMBA PL011 UART driver
[ 0.034126] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.035277] ACPI: Interpreter disabled.
[ 0.035721] vgaarb: loaded
[ 0.036004] EDAC MC: Ver: 3.0.0
[ 0.036369] dmi: Firmware registration failed.
[ 0.037690] clocksource: Switched to clocksource arch_sys_counter
[ 0.107296] VFS: Disk quotas dquot_6.6.0
[ 0.107393] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.108284] simple-framebuffer 3e9fc000.framebuffer: framebuffer at 0x3e9fc000, 0x1fe000 bytes, mapped to 0xffff000008200000
[ 0.108300] simple-framebuffer 3e9fc000.framebuffer: format=r5g6b5, mode=1360x768x16, linelength=2720
[ 0.121768] Console: switching to colour frame buffer device 170x48
[ 0.134559] simple-framebuffer 3e9fc000.framebuffer: fb0: simplefb registered!
[ 0.134612] pnp: PnP ACPI: disabled
[ 0.144294] NET: Registered protocol family 2
[ 0.145106] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.145223] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.145441] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.145653] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.145741] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.145997] NET: Registered protocol family 1
[ 0.146034] PCI: CLS 0 bytes, default 128
[ 0.146271] Unpacking initramfs...
[ 1.663846] Freeing initrd memory: 17444K
[ 1.669035] kvm [1]: 8-bit VMID
[ 1.669050] kvm [1]: IDMAP page: 7f8000
[ 1.669059] kvm [1]: HYP VA range: 800000000000:ffffffffffff
[ 1.669919] kvm [1]: Hyp mode initialized successfully
[ 1.669959] kvm [1]: Invalid trigger for IRQ4, assuming level low
[ 1.669985] kvm [1]: virtual timer IRQ4
[ 1.672200] audit: initializing netlink subsys (disabled)
[ 1.672370] audit: type=2000 audit(1.670:1): state=initialized audit_enabled=0 res=1
[ 1.672916] workingset: timestamp_bits=46 max_order=18 bucket_order=0
[ 1.673100] zbud: loaded
[ 3.817532] random: fast init done
[ 3.820101] Key type asymmetric registered
[ 3.820114] Asymmetric key parser 'x509' registered
[ 3.820230] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[ 3.820371] io scheduler noop registered
[ 3.820381] io scheduler deadline registered (default)
[ 3.820432] io scheduler cfq registered
[ 3.820441] io scheduler mq-deadline registered
[ 3.833224] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 3.834863] console [ttyS0] disabled
[ 3.834929] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 61, base_baud = 31250000) is a 16550
[ 4.596978] console [ttyS0] enabled
[ 4.601123] Serial: AMBA driver
[ 4.604616] msm_serial: driver initialized
[ 4.609253] cacheinfo: Unable to detect cache hierarchy for CPU 0
[ 4.615956] mousedev: PS/2 mouse device common for all mice
[ 4.623199] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.629321] dmi-sysfs: dmi entry is absent.
[ 4.633989] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 4.640056] NET: Registered protocol family 10
[ 4.645519] Segment Routing with IPv6
[ 4.649310] mip6: Mobile IPv6
[ 4.652335] NET: Registered protocol family 17
[ 4.656863] mpls_gso: MPLS GSO support
[ 4.661057] Registered cp15_barrier emulation handler
[ 4.666200] Registered setend emulation handler
[ 4.671533] registered taskstats version 1
[ 4.675779] zswap: loaded using pool lzo/zbud
[ 4.680386] ima: No TPM chip found, activating TPM-bypass! (rc=-19)
[ 4.690523] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 72, base_baud = 0) is a PL011 rev2
[ 7.218357] console [ttyAMA0] enabled
[ 7.234299] raspberrypi-firmware soc:firmware: Attached to firmware from 2017-10-06 13:56
[ 7.267506] hctosys: unable to open rtc device (rtc0)
[ 7.287895] PM: Hibernation image not present or could not be loaded.
[ 7.295042] Freeing unused kernel memory: 4288K
[ 7.648684] sdhci: Secure Digital Host Controller Interface driver
[ 7.673579] sdhci: Copyright(c) Pierre Ossman
[ 7.679735] usbcore: registered new interface driver usbfs
[ 7.679803] usbcore: registered new interface driver hub
[ 7.679975] usbcore: registered new device driver usb
[ 7.755916] sdhci-pltfm: SDHCI platform and OF driver helper
[ 7.757783] sdhost-bcm2835 3f202000.mmc: loaded - DMA enabled (>1)
[ 7.758347] i2c-bcm2835 3f805000.i2c: Could not read clock-frequency property
[ 7.786831] OF: /soc/usb@7e980000: could not get #phy-cells for /phy
[ 7.786890] dwc2 3f980000.usb: 3f980000.usb supply vusb_d not found, using dummy regulator
[ 7.786986] dwc2 3f980000.usb: 3f980000.usb supply vusb_a not found, using dummy regulator
[ 7.837508] dwc2 3f980000.usb: DWC OTG Controller
[ 7.837562] dwc2 3f980000.usb: new USB bus registered, assigned bus number 1
[ 7.837605] dwc2 3f980000.usb: irq 41, io mem 0x3f980000
[ 7.837962] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.837971] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.837977] usb usb1: Product: DWC OTG Controller
[ 7.837984] usb usb1: Manufacturer: Linux 4.13.0-1-arm64 dwc2_hsotg
[ 7.837990] usb usb1: SerialNumber: 3f980000.usb
[ 7.838768] hub 1-0:1.0: USB hub found
[ 7.838819] hub 1-0:1.0: 1 port detected
[ 7.852602] mmc0: host does not support reading read-only switch, assuming write-enable
[ 7.854499] mmc0: new high speed SDHC card at address 59b4
[ 7.854986] bounce: isa pool size: 16 pages
[ 7.855177] mmcblk0: mmc0:59b4 USD 14.7 GiB
[ 7.857248] mmcblk0: p1 p2
[ 8.225723] usb 1-1: new high-speed USB device number 2 using dwc2
[ 8.313793] mmc1: SDHCI controller on 3f300000.sdhci [3f300000.sdhci] using PIO
[ 8.366808] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 8.391782] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 8.415619] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 8.438033] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 8.440851] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 8.487003] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 8.516551] hub 1-1:1.0: USB hub found
[ 8.531791] hub 1-1:1.0: 5 ports detected
[ 8.542376] mmc1: new high speed SDIO card at address 0001
[ 8.575962] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[ 8.861743] usb 1-1.1: new high-speed USB device number 3 using dwc2
[ 8.986073] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 9.013701] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9.242019] systemd[1]: System time before build time, advancing clock.
[ 9.269730] usb 1-1.4: new low-speed USB device number 4 using dwc2
[ 9.404470] usb 1-1.4: New USB device found, idVendor=04fc, idProduct=05d8
[ 9.413169] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 9.453375] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 9.482700] usb 1-1.4: Product: Trust Keyboard 14909
[ 9.502604] usb 1-1.4: Manufacturer: MLK
[ 9.520128] systemd[1]: systemd 234 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 9.603668] systemd[1]: Detected architecture arm64.
[ 9.646804] systemd[1]: Set hostname to <rpi3>.
[ 9.762731] uart-pl011 3f201000.serial: no DMA platform data
[ 10.072180] systemd[1]: Created slice User and Session Slice.
[ 10.110157] systemd[1]: Listening on Journal Socket.
[ 10.146622] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 10.202711] systemd[1]: Created slice System Slice.
[ 10.244253] systemd[1]: Starting Load Kernel Modules...
[ 10.277160] random: crng init done
[ 10.295094] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 10.354073] systemd[1]: Mounting Huge Pages File System...
[ 10.883603] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 10.939242] EXT4-fs (mmcblk0p2): resizing filesystem from 179200 to 3783424 blocks
[ 11.712561] EXT4-fs (mmcblk0p2): resized filesystem to 3783424
[ 12.334240] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 12.487670] systemd-journald[177]: Received request to flush runtime journal from PID 1
[ 12.755373] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 12.783271] bcm2835-rng 3f104000.rng: hwrng registered
[ 13.050935] hidraw: raw HID events driver (C) Jiri Kosina
[ 13.154671] smsc95xx: unknown parameter 'macaddr' ignored
[ 13.178728] smsc95xx v1.0.6
[ 13.185158] usbcore: registered new interface driver usbhid
[ 13.185165] usbhid: USB HID core driver
[ 13.216891] input: MLK Trust Keyboard 14909 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:04FC:05D8.0001/input/input0
[ 13.249444] vc4_hdmi 3f902000.hdmi: vc4-hdmi-hifi <-> 3f902000.hdmi mapping ok
[ 13.249465] vc4_hdmi 3f902000.hdmi: ASoC: no DMI vendor name!
[ 13.250583] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[ 13.250854] vc4-drm soc:gpu: bound 3f806000.vec (ops vc4_vec_ops [vc4])
[ 13.250980] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 13.251344] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 13.251597] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 13.251852] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 13.251953] vc4-drm soc:gpu: Cannot do DMA to address 0x0000000000000000
[ 13.251961] swiotlb: coherent allocation failed for device soc:gpu size=16777216
[ 13.251975] CPU: 0 PID: 207 Comm: systemd-udevd Not tainted 4.13.0-1-arm64 #1 Debian 4.13.4-1
[ 13.251978] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 13.251985] Call trace:
[ 13.252013] [<ffff0a533a88a590>] dump_backtrace+0x0/0x2a0
[ 13.252025] [<ffff0a533a88a8a4>] show_stack+0x24/0x30
[ 13.252040] [<ffff0a533afdb134>] dump_stack+0x98/0xbc
[ 13.252052] [<ffff0a533ac21364>] swiotlb_alloc_coherent+0x17c/0x190
[ 13.252062] [<ffff0a533a89c5c0>] __dma_alloc+0x78/0x160
[ 13.252258] [<ffff03b38225910c>] drm_gem_cma_create+0xac/0x138 [drm]
[ 13.252345] [<ffff03b38246d714>] vc4_bo_create+0x104/0x160 [vc4]
[ 13.252432] [<ffff03b38247cbac>] vc4_allocate_bin_bo+0x9c/0x198 [vc4]
[ 13.252518] [<ffff03b38247ce60>] vc4_v3d_bind+0x100/0x288 [vc4]
[ 13.252532] [<ffff0a533adbbbe8>] component_bind_all+0x140/0x2c8
[ 13.252618] [<ffff03b38246fdac>] vc4_drm_bind+0x84/0x168 [vc4]
[ 13.252628] [<ffff0a533adbb770>] try_to_bring_up_master+0x290/0x2e0
[ 13.252637] [<ffff0a533adbba54>] component_master_add_with_match+0xb4/0x108
[ 13.252722] [<ffff03b38246ff60>] vc4_platform_drm_probe+0xd0/0x130 [vc4]
[ 13.252734] [<ffff0a533adc5b20>] platform_drv_probe+0x60/0xc8
[ 13.252742] [<ffff0a533adc31e4>] driver_probe_device+0x2e4/0x460
[ 13.252749] [<ffff0a533adc3484>] __driver_attach+0x124/0x128
[ 13.252756] [<ffff0a533adc08f0>] bus_for_each_dev+0x88/0xe8
[ 13.252763] [<ffff0a533adc28d0>] driver_attach+0x30/0x40
[ 13.252770] [<ffff0a533adc2268>] bus_add_driver+0x1f8/0x2b0
[ 13.252777] [<ffff0a533adc4238>] driver_register+0x68/0x100
[ 13.252785] [<ffff0a533adc5a44>] __platform_driver_register+0x54/0x60
[ 13.252872] [<ffff03b382496034>] vc4_drm_register+0x34/0x58 [vc4]
[ 13.252881] [<ffff0a533a88399c>] do_one_initcall+0x5c/0x168
[ 13.252890] [<ffff0a533a96ef58>] do_init_module+0x64/0x1cc
[ 13.252897] [<ffff0a533a96ddac>] load_module+0x2074/0x2718
[ 13.252903] [<ffff0a533a96e778>] SyS_finit_module+0x128/0x140
[ 13.252911] [<ffff0a533a88378c>] __sys_trace_return+0x0/0x4
[ 13.252943] vc4-drm soc:gpu: failed to allocate buffer with size 16777216
[ 13.252999] vc4-drm soc:gpu: Cannot do DMA to address 0x0000000000000000
[ 13.253005] swiotlb: coherent allocation failed for device soc:gpu size=16777216
[ 13.253013] CPU: 0 PID: 207 Comm: systemd-udevd Not tainted 4.13.0-1-arm64 #1 Debian 4.13.4-1
[ 13.253017] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT)
[ 13.253020] Call trace:
[ 13.253031] [<ffff0a533a88a590>] dump_backtrace+0x0/0x2a0
[ 13.253040] [<ffff0a533a88a8a4>] show_stack+0x24/0x30
[ 13.253051] [<ffff0a533afdb134>] dump_stack+0x98/0xbc
[ 13.253061] [<ffff0a533ac21364>] swiotlb_alloc_coherent+0x17c/0x190
[ 13.253070] [<ffff0a533a89c5c0>] __dma_alloc+0x78/0x160
[ 13.253228] [<ffff03b38225910c>] drm_gem_cma_create+0xac/0x138 [drm]
[ 13.253313] [<ffff03b38246d738>] vc4_bo_create+0x128/0x160 [vc4]
[ 13.253398] [<ffff03b38247cbac>] vc4_allocate_bin_bo+0x9c/0x198 [vc4]
[ 13.253484] [<ffff03b38247ce60>] vc4_v3d_bind+0x100/0x288 [vc4]
[ 13.253494] [<ffff0a533adbbbe8>] component_bind_all+0x140/0x2c8
[ 13.253578] [<ffff03b38246fdac>] vc4_drm_bind+0x84/0x168 [vc4]
[ 13.253588] [<ffff0a533adbb770>] try_to_bring_up_master+0x290/0x2e0
[ 13.253596] [<ffff0a533adbba54>] component_master_add_with_match+0xb4/0x108
[ 13.253681] [<ffff03b38246ff60>] vc4_platform_drm_probe+0xd0/0x130 [vc4]
[ 13.253693] [<ffff0a533adc5b20>] platform_drv_probe+0x60/0xc8
[ 13.253701] [<ffff0a533adc31e4>] driver_probe_device+0x2e4/0x460
[ 13.253709] [<ffff0a533adc3484>] __driver_attach+0x124/0x128
[ 13.253716] [<ffff0a533adc08f0>] bus_for_each_dev+0x88/0xe8
[ 13.253723] [<ffff0a533adc28d0>] driver_attach+0x30/0x40
[ 13.253730] [<ffff0a533adc2268>] bus_add_driver+0x1f8/0x2b0
[ 13.253737] [<ffff0a533adc4238>] driver_register+0x68/0x100
[ 13.253745] [<ffff0a533adc5a44>] __platform_driver_register+0x54/0x60
[ 13.253831] [<ffff03b382496034>] vc4_drm_register+0x34/0x58 [vc4]
[ 13.253839] [<ffff0a533a88399c>] do_one_initcall+0x5c/0x168
[ 13.253847] [<ffff0a533a96ef58>] do_init_module+0x64/0x1cc
[ 13.253854] [<ffff0a533a96ddac>] load_module+0x2074/0x2718
[ 13.253860] [<ffff0a533a96e778>] SyS_finit_module+0x128/0x140
[ 13.253868] [<ffff0a533a88378c>] __sys_trace_return+0x0/0x4
[ 13.253926] vc4-drm soc:gpu: failed to allocate buffer with size 16777216
[ 13.254023] [drm:vc4_bo_create [vc4]] *ERROR* Failed to allocate from CMA:
[ 13.254034] [drm] num bos allocated: 0
[ 13.254037] [drm] size bos allocated: 0kb
[ 13.254039] [drm] num bos used: 0
[ 13.254042] [drm] size bos used: 0kb
[ 13.254044] [drm] num bos cached: 0
[ 13.254047] [drm] size bos cached: 0kb
[ 13.254058] vc4_v3d 3fc00000.v3d: Failed to allocate memory for tile binning: -12. You may need to enable CMA or give it more memory.
[ 13.254174] vc4-drm soc:gpu: failed to bind 3fc00000.v3d (ops vc4_v3d_ops [vc4]): -12
[ 13.257090] vc4-drm soc:gpu: master bind failed: -12
[ 13.257157] vc4-drm: probe of soc:gpu failed with error -12
[ 13.282707] sunplus 0003:04FC:05D8.0001: input,hidraw0: USB HID v1.00 Keyboard [MLK Trust Keyboard 14909] on usb-3f980000.usb-1.4/input0
[ 13.282807] sunplus 0003:04FC:05D8.0002: fixing up Sunplus Wireless Desktop report descriptor
[ 13.289106] input: MLK Trust Keyboard 14909 as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:04FC:05D8.0002/input/input1
[ 13.358390] sunplus 0003:04FC:05D8.0002: input,hiddev0,hidraw1: USB HID v1.00 Mouse [MLK Trust Keyboard 14909] on usb-3f980000.usb-1.4/input1
[ 15.599610] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2d:f5:ab
[ 15.646622] usbcore: registered new interface driver smsc95xx
[ 16.439420] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 16.861477] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
[ 16.890036] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.319357] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 18.345975] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1C’est un plus long.
Les deux OS reconnaissent le raspberry correctement.
Par contre, sous ArchLinux, la carte son n’est pas reconnu. Et sous Debian, le fichier /boot/config.txt est complètement différent. Il est déjà beaucoup plus long. Il faut un peu plus de 7000 lignes.
Il y a bien un partition de boot, mais je n’ai pas encore eu le temps de regarder.
Quelques infos :
Explication des flags de lscpu
ARMv8-A & AArch64 sur wikipedia
Comparaison des ARMv8-A sur wikipedia
Un petit détail de l’ARM Cortex-A53 sur wikipedia
Spécifications des différents rasp… encore sur wikipedia
Je reviens vers vous concernant le fichier de boot et la reconnaissance de la carte.
Bonne journée.
Bonjour,
Ayant commandé la version 3 de la framboise au papa noël, ton sujet m’a attiré l’œil.
Comme ça c’est clair…
En même temps, quel intérêt d’un OS en 64bit avec si peu de mémoire ? En fait, quelle utilisation fais-tu de ton raspberry pour avoir besoin spécifiquement du 64bit ?
Bonjour sk4hrr,
Rien de bien spécial. Je l’utilise comme médiacenter. Il y a pleins (xbian, osmc, …) je les ai testé.
Globalement, c’est pareil. Perso, je déconseille openelec (et les dérivés…), car le système est bridé en lecture. Point de vue stabilité, nickel, j’avoue. Mais dès que tu veux modifier le système, c’est mort.
Là où ça se complique, c’est que j’ai une carte audio sur le gpio (carte audio BOSS DAC, de chez ALLO, au passage, que du bonheur.). Elle n’est pas reconnue avec les systèmes types OSMC (ou si reconnue, le son ne sort pas sur la carte). J’ai suivi la doc officielle, des tutos sur le net … Bref, à force de bidouiller un système, autant partir avec un nouveau.
Et je me suis dis, tant qu’à installer un système, autant prendre un OS compatible avec le hard.
Ceci, explique cela… Et puis, ça permet également d’en apprendre un peu plus.
Rien de plus.
Bonne soirée.
Perso j’utilise du rock64 (version 4 et 2Go de RAM) ainsi que de l’odroid C2 pour du cluster Docker hébergé sur de l’openstack maison.
L’intérêt d’utiliser de l’ARMV8 n’est pas juste d’utiliser de la framboise mais toutes les cartes exploitant cette architecture avec un OS commun permettant de part la même pouvoir mixer les cartes pour monter du cluster hybride à moindre coût et pleinement fonctionnel avec le support de playbook Ansible.
Je recommande effectivement de sortir du cadre de Raspbian dès que vous souhaitez faire quelque chose de précis, le support de ARM V8 de Debian est amplement suffisant pour mes besoins, j’avour ne pas utiliser par contre de cartes annexes DAC ou autre ni de la sortie vidéo ou son de la carte.
Merci de ta réponse, je ne jugeais pas dans ma question, c’était de la curiosité de ma part.
Ce sont des SE dédiés et optimisés pour Kodi ; ce n’est clairement pas destiné aux bricoleurs.
Je posais la question à @gunsx au cas où un intérêt du 64 bits m’échappait en fait. Par ailleurs, utiliser de l’ARMv8 ne force pas a avoir un système en 64 bits. Je comprends par contre parfaitement le besoin d’avoir un OS “universel”.
Bonsoir,
Bonne année et bonne santé.
Je vous remercie pour les réponses et conseils.
Je n’ai pas encore eu le temps de me pencher complètement sur la partition de boot pour débian. Et je pense que je n’aurais pas forcement le temps tout de suite.
Je reviens vers vous dès que j’aurais des news 
Je vous souhaite une bonne soirée.