Bonjour à tous,
Après avoir migré de Etch vers Testing, tout est OK sauf le WIFI qui ne fonctionne plus.
J’ai une carte ASUS WL-107-g (RT2500) sur port PCMCIA; j’ai installé le module RT2500 à l’aide de Module-Assistant…
Avez-vous des pistes?
Merci,
L
lol, toujours la même chose : des détails, des détails!
dmesg, iwconfig, iwlist scanning, lsmod… tu obtiens quoi, avec tout ça? (grep sur les références de ta cartes pcmcia : sinon ta réponse var faire 22 kilomètres de haut). On ne peux pas répondre si on n’a pas d’information:)
Tu as raison mais avant de vous poster tout ça, je me demande si c’est pas un probleme de dépot; en effet, en essayant d’installer PCMCIA (la carte WIFI est PCMCIA), j’obtiens sous Module assistant:
Échec de l’installation des sources de pcmcia-source.
│
│ Paquet ignoré. Vous devez peut-être ajouter quelque chose à
│ sources.list, comme les archives « contrib » et « non-free ».
Et voici mon source.list
[i]
deb ftp.fr.debian.org/debian/ testing main contrib non-free
deb-src ftp.fr.debian.org/debian/ testing main contrib non-free[/i]
Mmmmm?
Laurent
Désolé pour mon post précédent, “iwlist scanning” reconnait bien mon réseau WIFI (c’est que la carte WIFI PCMCIA est en vie, donc je me plie à ta requete:
debian:/home/laurent# iwlist scanning
lo Interface doesn’t support scanning.
eth0 Interface doesn’t support scanning.
eth1 Interface doesn’t support scanning.
wlan0_rename No scan results
debian:/home/laurent# iwlist scanning
lo Interface doesn’t support scanning.
eth0 Interface doesn’t support scanning.
eth1 Interface doesn’t support scanning.
wlan0_rename Scan completed :
Cell 01 - Address: 00:0F:66:C8:C4:E3
ESSID:"linksys"
Mode:Master
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=51/100 Signal level=-52 dBm
Encryption key:off
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s
12 Mb/s; 48 Mb/s
Extra:tsf=00000000003638fd
debian:/home/laurent# clear
debian:/home/laurent# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-12) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Mon Dec 15 18:15:07 UTC 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e7800 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000000ffe0000 (usable)
[ 0.000000] BIOS-e820: 000000000ffe0000 - 000000000ffefc00 (ACPI data)
[ 0.000000] BIOS-e820: 000000000ffefc00 - 000000000fff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000000fff0000 - 000000000fff2000 (reserved)
[ 0.000000] BIOS-e820: 000000000fff2000 - 0000000010000000 (usable)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 256MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 65536) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 65536
[ 0.000000] HighMem 65536 -> 65536
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 65536
[ 0.000000] On node 0 totalpages: 65536
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 480 pages used for memmap
[ 0.000000] Normal zone: 60960 pages, LIFO batch:15
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000F6440, 0014 (r0 FUJ )
[ 0.000000] ACPI: RSDT 0FFEC1AF, 0028 (r1 FUJ QUILT3 1240000 FUJ 1000)
[ 0.000000] ACPI: FACP 0FFEFB8C, 0074 (r1 FUJ QUILT3 1240000 FUJ 1000)
[ 0.000000] ACPI: DSDT 0FFEC1D7, 39B5 (r1 FUJ QUILT3 1240000 MSFT 1000007)
[ 0.000000] ACPI: FACS 0FFEFFC0, 0040
[ 0.000000] ACPI: DMI detected: Fujitsu Siemens
[ 0.000000] ACPI: PM-Timer IO Port: 0xff08
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 10000000:eff00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e8000
[ 0.000000] PM: Registered nosave memory: 00000000000e8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 000000000ffe0000 - 000000000ffef000
[ 0.000000] PM: Registered nosave memory: 000000000ffef000 - 000000000fff0000
[ 0.000000] PM: Registered nosave memory: 000000000fff0000 - 000000000fff2000
[ 0.000000] SMP: Allowing 0 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
[ 0.000000] Kernel command line: root=/dev/hda1 ro
[ 0.000000] Local APIC disabled by BIOS – you can enable it with “lapic”
[ 0.000000] mapped APIC to ffffb000 (0120c000)
[ 0.000000] Enabling fast FPU save and restore… done.
[ 0.000000] Enabling unmasked SIMD FPU exception support… done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 1024 (order: 10, 4096 bytes)
[ 0.000000] Detected 696.604 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.004000] Memory: 248900k/262144k available (1769k kernel code, 12584k reserved, 752k data, 244k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xd0800000 - 0xff7fe000 ( 751 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba46b - 0xc0376620 ( 752 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba46b (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode…Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084353] Calibrating delay using timer specific routine… 1394.94 BogoMIPS (lpj=2789888)
[ 0.084565] Security Framework initialized
[ 0.084631] SELinux: Disabled at boot.
[ 0.084688] Capability LSM initialized
[ 0.084784] Mount-cache hash table entries: 512
[ 0.085220] Initializing cgroup subsys ns
[ 0.085281] Initializing cgroup subsys cpuacct
[ 0.085340] Initializing cgroup subsys devices
[ 0.085445] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.085537] CPU: L2 cache: 512K
[ 0.085593] Intel machine check architecture supported.
[ 0.085654] Intel machine check reporting enabled on CPU#0.
[ 0.085736] Checking ‘hlt’ instruction… OK.
[ 0.100877] SMP alternatives: switching to UP code
[ 0.113463] Freeing SMP alternatives: 16k freed
[ 0.113523] ACPI: Core revision 20080321
[ 0.124745] ACPI: setting ELCR to 0200 (from 8200)
[ 0.132008] weird, boot CPU (#0) not listedby the BIOS.
[ 0.132008] SMP motherboard not detected.
[ 0.132008] Local APIC not detected. Using dummy APIC emulation.
[ 0.132008] SMP disabled
[ 0.132073] Brought up 1 CPUs
[ 0.132129] Total of 1 processors activated (1394.94 BogoMIPS).
[ 0.132202] CPU0 attaching sched-domain:
[ 0.132211] domain 0: span 0
[ 0.132218] groups: 0
[ 0.132782] net_namespace: 660 bytes
[ 0.132853] Booting paravirtualized kernel on bare hardware
[ 0.133651] NET: Registered protocol family 16
[ 0.134381] ACPI: bus type pci registered
[ 0.136629] PCI: PCI BIOS revision 2.10 entry at 0xfd9ce, last bus=2
[ 0.136691] PCI: Using configuration type 1 for base access
[ 0.136778] Setting up standard PCI resources
[ 0.146557] ACPI: EC: Look up EC in DSDT
[ 0.157706] ACPI: Interpreter enabled
[ 0.157768] ACPI: (supports S0 S3 S4 S5)
[ 0.157992] ACPI: Using PIC for interrupt routing
[ 0.175523] ACPI: EC: GPE = 0x2c, I/O: command/status = 0x66, data = 0x62
[ 0.175592] ACPI: EC: driver started in poll mode
[ 0.175773] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.176335] pci 0000:00:07.3: quirk: region ff00-ff3f claimed by PIIX4 ACPI
[ 0.176402] pci 0000:00:07.3: quirk: region ff80-ff8f claimed by PIIX4 SMB
[ 0.176468] pci 0000:00:07.3: PIIX4 devres C PIO at fd60-fd67
[ 0.176528] pci 0000:00:07.3: PIIX4 devres G PIO at 0118-011f
[ 0.176892] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]
[ 0.181075] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11)
[ 0.181787] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11)
[ 0.182496] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11)
[ 0.183227] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 *15)
[ 0.183880] ACPI: Power Resource [USBP] (on)
[ 0.184089] Linux Plug and Play Support v0.97 © Adam Belay
[ 0.184243] pnp: PnP ACPI init
[ 0.184317] ACPI: bus type pnp registered
[ 0.196719] pnp: PnP ACPI: found 12 devices
[ 0.196781] ACPI: ACPI bus type pnp unregistered
[ 0.196842] PnPBIOS: Disabled by ACPI PNP
[ 0.197706] PCI: Using ACPI for IRQ routing
[ 0.198231] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.198300] system 00:01: ioport range 0xff00-0xff3f has been reserved
[ 0.198363] system 00:01: ioport range 0xf800-0xf87f has been reserved
[ 0.198426] system 00:01: ioport range 0xfd60-0xfd67 has been reserved
[ 0.198490] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.198553] system 00:01: ioport range 0xff80-0xff8f has been reserved
[ 0.229874] PCI: Bus 1, cardbus bridge: 0000:00:13.0
[ 0.229934] IO window: 0x00002000-0x000020ff
[ 0.229992] IO window: 0x00002400-0x000024ff
[ 0.230050] PREFETCH window: 0x20000000-0x23ffffff
[ 0.230108] MEM window: 0x24000000-0x27ffffff
[ 0.230168] PCI: Bus 5, cardbus bridge: 0000:00:13.1
[ 0.230226] IO window: 0x00002800-0x000028ff
[ 0.230283] IO window: 0x00002c00-0x00002cff
[ 0.230341] PREFETCH window: 0x28000000-0x2bffffff
[ 0.230400] MEM window: 0x2c000000-0x2fffffff
[ 0.230889] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[ 0.230952] PCI: setting IRQ 9 as level-triggered
[ 0.230959] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 0.231473] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
[ 0.231534] ACPI: PCI Interrupt 0000:00:13.1[b] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 0.231739] NET: Registered protocol family 2
[ 0.232099] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.232823] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.233093] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.233350] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.233412] TCP reno registered
[ 0.233667] NET: Registered protocol family 1
[ 0.234048] checking if image is initramfs…<7>Switched to high resolution mode on CPU 0
[ 1.130268] it is
[ 2.181440] Freeing initrd memory: 7024k freed
[ 2.183221] audit: initializing netlink socket (disabled)
[ 2.183325] type=2000 audit(1232040514.180:1): initialized
[ 2.183708] Total HugeTLB memory allocated, 0
[ 2.183991] VFS: Disk quotas dquot_6.5.1
[ 2.184189] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.184361] msgmni has been set to 500
[ 2.184805] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 2.184880] io scheduler noop registered
[ 2.184934] io scheduler anticipatory registered
[ 2.184990] io scheduler deadline registered
[ 2.185072] io scheduler cfq registered (default)
[ 2.185211] pci 0000:00:14.0: Boot video device
[ 2.186194] isapnp: Scanning for PnP cards…
[ 2.539353] isapnp: No Plug & Play device found
[ 2.548167] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 2.548474] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.548991] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
[ 2.549751] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.550181] ACPI: PCI Interrupt 0000:00:00.2[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 2.550332] ACPI: PCI interrupt for device 0000:00:00.2 disabled
[ 2.554822] brd: module loaded
[ 2.555189] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.559831] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.559901] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.560701] mice: PS/2 mouse device common for all mice
[ 2.561128] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.561210] rtc0: alarms up to one month, y3k
[ 2.561369] cpuidle: using governor ladder
[ 2.561426] cpuidle: using governor menu
[ 2.561488] No iBFT detected.
[ 2.562998] TCP cubic registered
[ 2.563055] NET: Registered protocol family 17
[ 2.564014] Using IPI No-Shortcut mode
[ 2.564335] registered taskstats version 1
[ 2.564677] rtc_cmos 00:04: setting system clock to 2009-01-15 17:28:35 UTC (1232040515)
[ 2.565336] Freeing unused kernel memory: 244k freed
[ 2.592322] input: AT Translated Set 2 keyboard as /class/input/input0
[ 2.883702] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 2.884008] ACPI: ACPI0007:00 is registered as cooling_device0
[ 2.884102] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 3.876964] No dock devices found.
[ 4.208680] SCSI subsystem initialized
[ 4.245068] 8139too Fast Ethernet driver 0.9.28
[ 4.245714] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[ 4.245776] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[ 4.246943] eth0: RealTek RTL8139 at 0x8000, 00:e0:00:8c:34:1a, IRQ 9
[ 4.247005] eth0: Identified 8139 chip type ‘RTL-8139C’
[ 4.253762] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 4.255557] usbcore: registered new interface driver usbfs
[ 4.255700] usbcore: registered new interface driver hub
[ 4.255871] usbcore: registered new device driver usb
[ 4.280084] USB Universal Host Controller Interface driver v3.0
[ 4.280743] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 15
[ 4.280806] PCI: setting IRQ 15 as level-triggered
[ 4.280814] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 15 (level, low) -> IRQ 15
[ 4.280971] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 4.281309] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 4.281421] uhci_hcd 0000:00:07.2: irq 15, io base 0x00001ca0
[ 4.281726] usb usb1: configuration #1 chosen from 1 choice
[ 4.281866] hub 1-0:1.0: USB hub found
[ 4.281937] hub 1-0:1.0: 2 ports detected
[ 4.384514] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.384591] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.384664] usb usb1: Product: UHCI Host Controller
[ 4.384722] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 4.384781] usb usb1: SerialNumber: 0000:00:07.2
[ 4.624088] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 4.627623] libata version 3.00 loaded.
[ 4.801663] usb 1-2: configuration #1 chosen from 1 choice
[ 4.807658] hub 1-2:1.0: USB hub found
[ 4.808497] hub 1-2:1.0: 2 ports detected
[ 4.811730] Uniform Multi-Platform E-IDE driver
[ 4.812146] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 4.881052] PIIX4: IDE controller (0x8086:0x7199 rev 0x00) at PCI slot 0000:00:07.1
[ 4.881157] PIIX4: not 100% native mode: will probe irqs later
[ 4.881222] PIIX4: IDE port disabled
[ 4.881283] ide0: BM-DMA at 0x1c90-0x1c97
[ 4.881348] Probing IDE interface ide0…
[ 4.918804] usb 1-2: New USB device found, idVendor=0451, idProduct=2036
[ 4.919245] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.919396] usb 1-2: Product: General Purpose USB Hub
[ 5.121452] usb 1-2.1: new low speed USB device using uhci_hcd and address 3
[ 5.168237] hda: HITACHI_DK23EA-30, ATA DISK drive
[ 5.246931] Floppy drive(s): fd0 is 1.44M
[ 5.261570] usb 1-2.1: configuration #1 chosen from 1 choice
[ 5.265071] FDC 0 is a post-1991 82077
[ 5.265436] usb 1-2.1: New USB device found, idVendor=0458, idProduct=003a
[ 5.265501] usb 1-2.1: New USB device strings: Mfr=2, Product=1, SerialNumber=0
[ 5.265573] usb 1-2.1: Product: Optical Mouse
[ 5.265628] usb 1-2.1: Manufacturer: Genius
[ 5.713038] usbcore: registered new interface driver hiddev
[ 5.725278] input: Genius Optical Mouse as /class/input/input1
[ 5.725278] input,hidraw0: USB HID v1.10 Mouse [Genius Optical Mouse] on usb-0000:00:07.2-2.1
[ 5.725278] usbcore: registered new interface driver usbhid
[ 5.725278] usbhid: v2.6:USB HID core driver
[ 5.840018] Marking TSC unstable due to: TSC halts in idle.
[ 5.841747] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.841849] hda: UDMA/33 mode selected
[ 5.841993] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.896319] hda: max request size: 128KiB
[ 5.898476] hda: 58605120 sectors (30005 MB) w/2048KiB Cache, CHS=58140/16/63
[ 5.898870] hda: cache flushes supported
[ 5.899025] hda: hda1 hda2 < hda5 hda6 >
[ 6.332576] PM: Starting manual resume from disk
[ 6.451087] kjournald starting. Commit interval 5 seconds
[ 6.451184] EXT3-fs: mounted filesystem with ordered data mode.
[ 10.012509] udevd version 125 started
[ 14.459740] Yenta: CardBus bridge found at 0000:00:13.0 [10cf:10e6]
[ 14.459841] Yenta O2: res at 0x94/0xD4: ea/00
[ 14.459896] Yenta O2: enabling read prefetch/write burst
[ 14.592966] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
[ 14.593034] Socket status: 30000820
[ 14.593741] Yenta: CardBus bridge found at 0000:00:13.1 [10cf:10e6]
[ 14.721008] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
[ 14.721076] Socket status: 30000006
[ 14.725592] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 15.103823] input: PC Speaker as /class/input/input2
[ 15.228068] pccard: CardBus card inserted into slot 0
[ 15.675112] input: PS/2 Touchpad as /class/input/input3
[ 15.918950] input: LBPS/2 Fujitsu Lifebook TouchScreen as /class/input/input4
[ 16.222283] input: Power Button (FF) as /class/input/input5
[ 16.245181] ACPI: Power Button (FF) [PWRF]
[ 16.245459] input: Power Button (CM) as /class/input/input6
[ 16.268923] ACPI: Power Button (CM) [PWRB]
[ 16.269152] input: Lid Switch as /class/input/input7
[ 16.287306] ACPI: Lid Switch [LID]
[ 16.544858] ACPI: AC Adapter [AC] (on-line)
[ 17.126231] ACPI: Battery Slot [CMB1] (battery present)
[ 19.569257] input: Video Bus as /class/input/input8
[ 19.602116] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 19.934013] parport_pc 00:0a: reported by Plug and Play ACPI
[ 19.934117] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 20.218391] NET: Registered protocol family 23
[ 20.303274] found SMC SuperIO Chip (devid=0x28 rev=01 base=0x03f0): FDC37N769
[ 20.303364] smsc_superio_flat(): fir: 0x118, sir: 0x2e8, dma: 03, irq: 3, mode: 0x0e
[ 20.303443] smsc_ircc_present: can’t get sir_base of 0x2e8
[ 20.590719] cs: IO port probe 0x100-0x3af: excluding 0x118-0x11f
[ 20.591708] cs: IO port probe 0x3e0-0x4ff: clean.
[ 20.592210] cs: IO port probe 0x820-0x8ff: clean.
[ 20.592631] cs: IO port probe 0xc00-0xcf7: clean.
[ 20.593296] cs: IO port probe 0xa00-0xaff: clean.
[ 20.831834] rt2500: no symbol version for struct_module
[ 21.717638] rt2500pci 0000:01:00.0: enabling device (0000 -> 0002)
[ 21.717721] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[ 21.717870] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 21.820978] phy0: Selected rate control algorithm ‘pid’
[ 22.854743] ACPI: PCI Interrupt 0000:00:00.2[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 22.854923] PCI: Setting latency timer of device 0000:00:00.2 to 64
[ 22.917880] Registered led device: rt2500pci-phy0:radio
[ 22.918876] ACPI: PCI Interrupt 0000:00:00.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
[ 22.919483] PCI: Setting latency timer of device 0000:00:00.1 to 64
[ 22.955700] udev: renamed network interface wmaster0 to eth1
[ 22.981090] cs: IO port probe 0x100-0x3af: excluding 0x118-0x11f
[ 22.982077] cs: IO port probe 0x3e0-0x4ff: clean.
[ 22.982549] cs: IO port probe 0x820-0x8ff: clean.
[ 22.982969] cs: IO port probe 0xc00-0xcf7: clean.
[ 22.983628] cs: IO port probe 0xa00-0xaff: clean.
[ 23.492042] intel8x0_measure_ac97_clock: measured 55268 usecs
[ 23.492112] intel8x0: clocking to 48000
[ 54.866111] Adding 755012k swap on /dev/hda5. Priority:-1 extents:1 across:755012k
[ 55.724619] EXT3 FS on hda1, internal journal
[ 56.143266] loop: module loaded
[ 56.346613] device-mapper: uevent: version 1.0.3
[ 56.346822] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 57.392856] kjournald starting. Commit interval 5 seconds
[ 57.401153] EXT3 FS on hda6, internal journal
[ 57.401153] EXT3-fs: mounted filesystem with ordered data mode.
[ 59.049717] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 129.422146] lp0: using parport0 (interrupt-driven).
[ 129.452030] ppdev: user-space parallel port driver
[ 135.417165] NET: Registered protocol family 10
[ 135.418829] lo: Disabled Privacy Extensions
[ 135.580078] warning: `avahi-daemon’ uses 32-bit capabilities (legacy support in use)
[ 140.676016] Bluetooth: Core ver 2.11
[ 140.680033] NET: Registered protocol family 31
[ 140.680033] Bluetooth: HCI device and connection manager initialized
[ 140.680033] Bluetooth: HCI socket layer initialized
[ 140.947184] Bluetooth: L2CAP ver 2.9
[ 140.947253] Bluetooth: L2CAP socket layer initialized
[ 141.123737] Bluetooth: RFCOMM socket layer initialized
[ 141.123836] Bluetooth: RFCOMM TTY layer initialized
[ 141.123895] Bluetooth: RFCOMM ver 1.8
[ 141.404728] ADDRCONF(NETDEV_UP): wlan0_rename: link is not ready
[ 159.452018] eth0: no IPv6 routers present
[ 564.908308] eth0: link down
[ 615.216035] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 615.216035] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 618.555972] eth0: link down
[ 620.405558] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 620.406619] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 639.166715] eth0: no IPv6 routers present
debian:/home/laurent# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 no wireless extensions.
wlan0_rename IEEE 802.11 ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
debian:/home/laurent# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
eth1 no wireless extensions.
wlan0_rename IEEE 802.11 ESSID:""
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
debian:/home/laurent# lsmod
Module Size Used by
rfcomm 28272 2
l2cap 17248 9 rfcomm
bluetooth 44900 4 rfcomm,l2cap
ipv6 235300 18
ppdev 6468 0
lp 8164 0
acpi_cpufreq 6796 0
speedstep_lib 4516 0
cpufreq_stats 3776 0
cpufreq_powersave 1856 0
cpufreq_ondemand 6476 1
freq_table 4224 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_userspace 3172 0
cpufreq_conservative 5960 0
dm_snapshot 14340 0
dm_mirror 15104 0
dm_log 8452 1 dm_mirror
dm_mod 46184 3 dm_snapshot,dm_mirror,dm_log
loop 12748 0
arc4 1824 2
snd_intel8x0 26268 1
snd_intel8x0m 12492 0
ecb 2624 2
snd_ac97_codec 88484 2 snd_intel8x0,snd_intel8x0m
crypto_blkcipher 15236 1 ecb
ac97_bus 1728 1 snd_ac97_codec
snd_pcm_oss 32800 0
snd_mixer_oss 12320 1 snd_pcm_oss
snd_pcm 62596 4 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss
rt2500pci 17152 0
rt2x00pci 7648 1 rt2500pci
rt2x00lib 22432 2 rt2500pci,rt2x00pci
rfkill 5652 1 rt2x00lib
led_class 3908 1 rt2x00lib
input_polldev 3752 1 rt2x00lib
mac80211 139680 2 rt2x00pci,rt2x00lib
joydev 8480 0
cfg80211 21576 2 rt2x00lib,mac80211
eeprom_93cx6 2144 1 rt2500pci
snd_seq_dummy 2660 0
irda 95480 0
crc_ccitt 2080 1 irda
parport_pc 22500 1
parport 30988 3 ppdev,lp,parport_pc
pcmcia 29548 0
firmware_class 6816 2 rt2x00lib,pcmcia
video 16432 0
output 2912 1 video
snd_seq_oss 24992 0
snd_seq_midi 5728 0
snd_rawmidi 18496 1 snd_seq_midi
snd_seq_midi_event 6432 2 snd_seq_oss,snd_seq_midi
battery 10180 0
snd_seq 41456 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
ac 4196 0
button 6096 0
snd_timer 17800 2 snd_pcm,snd_seq
snd_seq_device 6380 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
psmouse 32336 0
snd 45604 13 snd_intel8x0,snd_intel8x0m,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
pcspkr 2432 0
serio_raw 4740 0
i2c_piix4 7216 0
i2c_core 19828 1 i2c_piix4
yenta_socket 20620 3
rsrc_nonstatic 9504 1 yenta_socket
soundcore 6368 1 snd
snd_page_alloc 7816 3 snd_intel8x0,snd_intel8x0m,snd_pcm
pcmcia_core 31892 3 pcmcia,yenta_socket,rsrc_nonstatic
evdev 8000 5
ext3 105512 2
jbd 39444 1 ext3
mbcache 7108 1 ext3
ide_disk 10496 4
usbhid 35904 0
hid 33184 1 usbhid
ff_memless 4392 1 usbhid
floppy 47716 0
piix 6568 0 [permanent]
ide_pci_generic 3908 0 [permanent]
ide_core 96168 3 ide_disk,piix,ide_pci_generic
ata_generic 4676 0
libata 140384 1 ata_generic
uhci_hcd 18672 0
8139cp 16800 0
8139too 20320 0
mii 4896 2 8139cp,8139too
usbcore 118160 3 usbhid,uhci_hcd
scsi_mod 129356 1 libata
dock 8304 1 libata
thermal 15228 0
processor 32576 3 acpi_cpufreq,thermal
fan 4164 0
thermal_sys 10856 4 video,thermal,processor,fan
Problème résolu, ne perdez pas de temps la dessus, par contre j’ai trop honte, je préfère rester discret sur la cause du probleme 
Laurent