Et enfin de /var/log/xorg.0.log :
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-2-686 (Debian 2.6.26-21) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Sat Dec 26 09:01:51 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe70000 (usable)
[ 0.000000] BIOS-e820: 000000003fe70000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00f6a10] 000f6a10
[ 0.000000] Entering add_active_range(0, 0, 261744) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261744
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261744
[ 0.000000] On node 0 totalpages: 261744
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32115 pages, LIFO batch:7
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F6960, 0024 (r2 TOSINV)
[ 0.000000] ACPI: XSDT 3FE78436, 008C (r1 TOSINV TOSINV00 6040000 INV 0)
[ 0.000000] ACPI: FACP 3FE81BF8, 00F4 (r3 TOSINV TOSINV00 6040000 ALAN 1)
[ 0.000000] ACPI: DSDT 3FE7A1CF, 79B5 (r2 TOSINV CALISTGA 6040000 INTL 20050624)
[ 0.000000] ACPI: FACS 3FE82FC0, 0040
[ 0.000000] ACPI: APIC 3FE81CEC, 0068 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: HPET 3FE81D54, 0038 (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: MCFG 3FE81D8C, 003C (r1 INTEL CALISTGA 6040000 LOHR 5A)
[ 0.000000] ACPI: TCPA 3FE81DC8, 0032 (r1 PTLTD CALISTGA 6040000 PTL 1)
[ 0.000000] ACPI: APIC 3FE81DFA, 0068 (r1 TOSINV APIC 6040000 INV 0)
[ 0.000000] ACPI: SLIC 3FE81E62, 0176 (r1 TOSINV TOSINV00 6040000 INV 0)
[ 0.000000] ACPI: BOOT 3FE81FD8, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP 1)
[ 0.000000] ACPI: SSDT 3FE79B80, 064F (r1 SataRe SataPri 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3FE794EE, 0692 (r1 SataRe SataSec 1000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3FE78A4E, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3FE789A8, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT 3FE784C2, 04E6 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
[ 0.000000] ACPI: DMI detected: Toshiba
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37992 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259699
[ 0.000000] Kernel command line: root=/dev/sda1 ro single
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Detected 1596.130 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 1027960k/1046976k available (1770k kernel code, 18412k reserved, 750k data, 244k init, 129472k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02baba9 - 0xc0376620 ( 750 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02baba9 (1770 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083919] Calibrating delay using timer specific routine.. 3196.39 BogoMIPS (lpj=6392793)
[ 0.084005] Security Framework initialized
[ 0.084005] SELinux: Disabled at boot.
[ 0.084005] Capability LSM initialized
[ 0.084005] Mount-cache hash table entries: 512
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084005] CPU: L2 cache: 2048K
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084005] Intel machine check architecture supported.
[ 0.084005] Intel machine check reporting enabled on CPU#0.
[ 0.084005] using mwait in idle threads.
[ 0.084005] Checking 'hlt' instruction... OK.
[ 0.099462] ACPI: Core revision 20080321
[ 0.116007] ENABLING IO-APIC IRQs
[ 0.116007] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.155827] CPU0: Intel Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
[ 0.156009] Booting processor 1/1 ip 6000
[ 0.164010] Initializing CPU#1
[ 0.164010] Calibrating delay using timer specific routine.. 3192.01 BogoMIPS (lpj=6384033)
[ 0.164010] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.164010] CPU: L2 cache: 2048K
[ 0.164010] CPU: Physical Processor ID: 0
[ 0.164010] CPU: Processor Core ID: 1
[ 0.164010] Intel machine check architecture supported.
[ 0.164010] Intel machine check reporting enabled on CPU#1.
[ 0.244015] CPU1: Intel Genuine Intel(R) CPU T2050 @ 1.60GHz stepping 08
[ 0.244015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.248015] Brought up 2 CPUs
[ 0.248015] Total of 2 processors activated (6388.41 BogoMIPS).
[ 0.248015] CPU0 attaching sched-domain:
[ 0.248015] domain 0: span 0-1
[ 0.248015] groups: 0 1
[ 0.248015] CPU1 attaching sched-domain:
[ 0.248015] domain 0: span 0-1
[ 0.248015] groups: 1 0
[ 0.248015] net_namespace: 660 bytes
[ 0.248015] Booting paravirtualized kernel on bare hardware
[ 0.248015] NET: Registered protocol family 16
[ 0.248015] ACPI: bus type pci registered
[ 0.248015] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.248142] PCI: Not using MMCONFIG.
[ 0.248385] PCI: PCI BIOS revision 2.10 entry at 0xfd604, last bus=7
[ 0.248505] PCI: Using configuration type 1 for base access
[ 0.248631] Setting up standard PCI resources
[ 0.253074] ACPI: EC: Look up EC in DSDT
[ 0.280017] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 0.281036] ACPI: Interpreter enabled
[ 0.281153] ACPI: (supports S0 S3 S4 S5)
[ 0.281689] ACPI: Using IOAPIC for interrupt routing
[ 0.281869] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.353491] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
[ 0.353613] PCI: Using MMCONFIG for extended config space
[ 0.356022] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.479824] ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.479824] ACPI: EC: driver started in interrupt mode
[ 0.479824] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.479824] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.479824] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.479824] PCI: Transparent bridge - 0000:00:1e.0
[ 0.479824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.480242] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 0.480425] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.480603] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.480778] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.480967] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.607826] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.607826] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.607826] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.609415] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.611826] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.613305] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.614992] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.616466] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.620652] ACPI: Power Resource [FN00] (off)
[ 0.620652] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.620652] pnp: PnP ACPI init
[ 0.620652] ACPI: bus type pnp registered
[ 0.693330] pnp: PnP ACPI: found 10 devices
[ 0.693447] ACPI: ACPI bus type pnp unregistered
[ 0.693566] PnPBIOS: Disabled by ACPI PNP
[ 0.695035] PCI: Using ACPI for IRQ routing
[ 0.697704] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.699035] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.699035] ACPI: RTC can wake from S4
[ 0.700058] Switched to high resolution mode on CPU 0
[ 0.705255] Switched to high resolution mode on CPU 1
[ 0.705275] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.705396] system 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 0.705526] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 0.705657] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 0.705787] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 0.705917] system 00:01: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 0.706047] system 00:01: iomem range 0xfed40000-0xfed44fff could not be reserved
[ 0.706177] system 00:01: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 0.709251] system 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
[ 0.709386] system 00:06: ioport range 0x3e8-0x3ef has been reserved
[ 0.709506] system 00:06: ioport range 0x400-0x401 has been reserved
[ 0.709626] system 00:06: ioport range 0x680-0x69f has been reserved
[ 0.709745] system 00:06: ioport range 0x800-0x80f has been reserved
[ 0.709864] system 00:06: ioport range 0x1000-0x107f has been reserved
[ 0.709984] system 00:06: ioport range 0x1180-0x11bf has been reserved
[ 0.710106] system 00:06: ioport range 0x1640-0x164f has been reserved
[ 0.710227] system 00:06: ioport range 0xfe00-0xfe01 has been reserved
[ 0.741222] PCI: region 0000:07:06.0/9 too large: 0x0000000000000000-0x0000000003ffffff
[ 0.741357] PCI: Bridge: 0000:00:01.0
[ 0.741473] IO window: 2000-2fff
[ 0.742288] MEM window: 0xf8700000-0xf87fffff
[ 0.742406] PREFETCH window: 0x00000000f0000000-0x00000000f7ffffff
[ 0.742528] PCI: Bridge: 0000:00:1c.0
[ 0.742644] IO window: disabled.
[ 0.742763] MEM window: disabled.
[ 0.742881] PREFETCH window: disabled.
[ 0.743003] PCI: Bridge: 0000:00:1c.1
[ 0.743120] IO window: 3000-3fff
[ 0.743240] MEM window: 0xf8800000-0xf88fffff
[ 0.743360] PREFETCH window: 0x00000000f8200000-0x00000000f83fffff
[ 0.743484] PCI: Bridge: 0000:00:1c.2
[ 0.743601] IO window: 4000-4fff
[ 0.743721] MEM window: 0xf8900000-0xf89fffff
[ 0.743842] PREFETCH window: 0x00000000f8400000-0x00000000f85fffff
[ 0.743884] PCI: Bus 8, cardbus bridge: 0000:07:06.0
[ 0.743884] IO window: 0x00005400-0x000054ff
[ 0.743884] IO window: 0x00005800-0x000058ff
[ 0Qui.743884] MEM window: 0x50000000-0x53ffffff
[ 0.743884] PCI: Bridge: 0000:00:1e.0
[ 0.743884] IO window: 5000-5fff
[ 0.743884] MEM window: 0xf8a00000-0xf8afffff
[ 0.743884] PREFETCH window: disabled.
[ 0.743884] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.744120] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.744146] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.744380] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.744406] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.744640] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.744666] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.744900] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.744916] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.744935] pci 0000:07:06.0: enabling device (0000 -> 0003)
[ 0.745055] ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 0.746284] NET: Registered protocol family 2
[ 0.761122] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.761517] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.762402] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.762903] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.763023] TCP reno registered
[ 0.769141] NET: Registered protocol family 1
[ 0.769388] checking if image is initramfs... it is
[ 1.373138] Freeing initrd memory: 6076k freed
[ 1.376847] Simple Boot Flag at 0x36 set to 0x1
[ 1.380849] audit: initializing netlink socket (disabled)
[ 1.380849] type=2000 audit(1265298933.360:1): initialized
[ 1.380849] highmem bounce pool size: 64 pages
[ 1.380849] Total HugeTLB memory allocated, 0
[ 1.380849] VFS: Disk quotas dquot_6.5.1
[ 1.380849] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.380849] msgmni has been set to 1767
[ 1.380849] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.380849] io scheduler noop registered
[ 1.380849] io scheduler anticipatory registered
[ 1.380849] io scheduler deadline registered
[ 1.380849] io scheduler cfq registered (default)
[ 1.380849] pci 0000:01:00.0: Boot video device
[ 1.380849] pci 0000:07:08.0: Firmware left e100 interrupts enabled; disabling
[ 1.381037] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 1.381037] assign_interrupt_mode Found MSI capability
[ 1.381037] Allocate Port Service[0000:00:01.0:pcie00]
[ 1.381037] Allocate Port Service[0000:00:01.0:pcie03]
[ 1.381037] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.381037] assign_interrupt_mode Found MSI capability
[ 1.381037] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.381037] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.381037] Allocate Port Service[0000:00:1c.0:pcie03]
[ 1.381037] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.381073] assign_interrupt_mode Found MSI capability
[ 1.381239] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.383290] Allocate Port Service[0000:00:1c.1:pcie02]
[ 1.384848] Allocate Port Service[0000:00:1c.1:pcie03]
[ 1.384848] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 1.384848] assign_interrupt_mode Found MSI capability
[ 1.384848] Allocate Port Service[0000:00:1c.2:pcie00]
[ 1.384848] Allocate Port Service[0000:00:1c.2:pcie02]
[ 1.384848] Allocate Port Service[0000:00:1c.2:pcie03]
[ 1.384848] isapnp: Scanning for PnP cards...
[ 1.738346] isapnp: No Plug & Play device found
[ 1.740863] hpet_resources: 0xfed00000 is busy
[ 1.740863] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.744848] brd: module loaded
[ 1.744848] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.746376] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.748044] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.748044] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.748044] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.748044] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.748044] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.752045] mice: PS/2 mouse device common for all mice
[ 1.752045] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 1.752045] rtc0: alarms up to one month, y3k
[ 1.752045] cpuidle: using governor ladder
[ 1.752045] cpuidle: using governor menu
[ 1.752045] No iBFT detected.
[ 1.752045] TCP cubic registered
[ 1.752045] NET: Registered protocol family 17
[ 1.752045] Using IPI No-Shortcut mode
[ 1.752045] registered taskstats version 1
[ 1.752045] rtc_cmos 00:07: setting system clock to 2010-02-04 15:55:34 UTC (1265298934)
[ 1.752045] Freeing unused kernel memory: 244k freed
[ 1.787810] input: AT Translated Set 2 keyboard as /class/input/input0
[ 1.857682] ACPI: Transitioning device [FAN0] to D3
[ 1.857682] ACPI: PNP0C0B:00 is registered as cooling_device0
[ 1.857682] ACPI: Fan [FAN0] (off)
[ 1.869678] ACPI: SSDT 3FE791F4, 023D (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 1.870556] ACPI: SSDT 3FE78CAD, 04C2 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 1.876908] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 1.876908] ACPI: ACPI0007:00 is registered as cooling_device1
[ 1.876908] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.876908] ACPI: SSDT 3FE79431, 00BD (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 1.876908] ACPI: SSDT 3FE7916F, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 1.880905] Marking TSC unstable due to: TSC halts in idle.
[ 1.880911] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 1.880911] ACPI: ACPI0007:01 is registered as cooling_device2
[ 1.880911] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.880925] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.880925] ACPI: Thermal Zone [TZ00] (41 C)
[ 1.883933] ACPI: LNXTHERM:02 is registered as thermal_zone1
[ 1.884489] ACPI: Transitioning device [FAN0] to D0
[ 1.884607] ACPI: Unable to turn cooling device [f7437fcc] 'on'
[ 1.884728] ACPI: Thermal Zone [TZ01] (39 C)
[ 2.104130] ACPI: ACPI Dock Station Driver
[ 2.294364] usbcore: registered new interface driver usbfs
[ 2.294519] usbcore: registered new interface driver hub
[ 2.294687] usbcore: registered new device driver usb
[ 2.297342] USB Universal Host Controller Interface driver v3.0
[ 2.297505] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
[ 2.297744] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.297749] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.297999] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.298162] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
[ 2.298374] usb usb1: configuration #1 chosen from 1 choice
[ 2.298523] hub 1-0:1.0: USB hub found
[ 2.298644] hub 1-0:1.0: 2 ports detected
[ 2.399897] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.400022] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.400152] usb usb1: Product: UHCI Host Controller
[ 2.400270] usb usb1: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.400388] usb usb1: SerialNumber: 0000:00:1d.0
[ 2.400556] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
[ 2.402533] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 2.402538] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 2.402682] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 2.402847] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
[ 2.403059] usb usb2: configuration #1 chosen from 1 choice
[ 2.403212] hub 2-0:1.0: USB hub found
[ 2.403333] hub 2-0:1.0: 2 ports detected
[ 2.413227] SCSI subsystem initialized
[ 2.428479] libata version 3.00 loaded.
[ 2.474532] sdhci: Secure Digital Host Controller Interface driver
[ 2.474532] sdhci: Copyright(c) Pierre Ossman
[ 2.481035] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 2.481157] e100: Copyright(c) 1999-2006 Intel Corporation
[ 2.506974] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.507125] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.507255] usb usb2: Product: UHCI Host Controller
[ 2.508998] usb usb2: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.508998] usb usb2: SerialNumber: 0000:00:1d.1
[ 2.508998] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 2.508998] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 2.508998] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 2.508998] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 2.508998] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 2.508998] usb usb3: configuration #1 chosen from 1 choice
[ 2.508998] hub 3-0:1.0: USB hub found
[ 2.508998] hub 3-0:1.0: 2 ports detected
[ 2.610464] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.610596] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.610739] usb usb3: Product: UHCI Host Controller
[ 2.610856] usb usb3: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.610975] usb usb3: SerialNumber: 0000:00:1d.2
[ 2.613076] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 2.613076] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 2.613076] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 2.613076] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 2.613076] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 2.613076] usb usb4: configuration #1 chosen from 1 choice
[ 2.613076] hub 4-0:1.0: USB hub found
[ 2.613076] hub 4-0:1.0: 2 ports detected
[ 2.714168] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.714300] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.714443] usb usb4: Product: UHCI Host Controller
[ 2.714560] usb usb4: Manufacturer: Linux 2.6.26-2-686 uhci_hcd
[ 2.714679] usb usb4: SerialNumber: 0000:00:1d.3
[ 2.717770] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
[ 2.717770] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 2.717770] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 2.717770] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 2.723504] ehci_hcd 0000:00:1d.7: debug port 1
[ 2.723504] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 2.723504] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8d04000
[ 2.736676] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.736892] usb usb5: configuration #1 chosen from 1 choice
[ 2.737044] hub 5-0:1.0: USB hub found
[ 2.737166] hub 5-0:1.0: 8 ports detected
[ 2.845636] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.845787] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.845917] usb usb5: Product: EHCI Host Controller
[ 2.846044] usb usb5: Manufacturer: Linux 2.6.26-2-686 ehci_hcd
[ 2.846163] usb usb5: SerialNumber: 0000:00:1d.7
[ 2.851458] ACPI: PCI Interrupt 0000:07:06.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 2.899445] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17] MMIO=[f8a06000-f8a067ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 2.903420] sdhci: SDHCI controller found at 0000:07:06.3 [104c:803c] (rev 0)
[ 2.903420] ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> IRQ 18
[ 2.903420] mmc0: SDHCI at 0xf8a06800 irq 18 DMA
[ 2.903420] ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 2.933329] e100: eth0: e100_probe: addr 0xf8a05000, irq 20, MAC addr 00:a0:d1:4e:72:df
[ 2.933329] ata_piix 0000:00:1f.2: version 2.12
[ 2.933329] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
[ 2.933329] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 3.089403] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.093367] scsi0 : ata_piix
[ 3.093367] scsi1 : ata_piix
[ 3.093367] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x18b0 irq 14
[ 3.093367] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18b8 irq 15
[ 3.253998] ata1.00: ATA-6: TOSHIBA MK1032GSX, AS021G, max UDMA/100
[ 3.254131] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 3.262006] ata1.00: configured for UDMA/100
[ 3.428879] ata2.00: ATAPI: MATSHITADVD-RAM UJ-841S, 1.60, max UDMA/33
[ 3.444687] ata2.00: configured for UDMA/33
[ 3.444687] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1032GS AS02 PQ: 0 ANSI: 5
[ 3.449304] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-841S 1.60 PQ: 0 ANSI: 5
[ 3.456338] Uniform Multi-Platform E-IDE driver
[ 3.456338] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 3.475386] Driver 'sd' needs updating - please use bus_type methods
[ 3.475386] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 3.475386] sd 0:0:0:0: [sda] Write Protect is off
[ 3.475386] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.475386] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.475386] sd 0:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
[ 3.475386] sd 0:0:0:0: [sda] Write Protect is off
[ 3.475386] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.475386] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.475386] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 3.506875] sda1 sda2 < sda5 sda6 >
[ 3.527631] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.532513] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 3.532513] Uniform CD-ROM driver Revision: 3.20
[ 3.532513] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.548512] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.548512] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 3.817438] PM: Starting manual resume from disk
[ 3.836059] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 3.836059] EXT3-fs: write access will be enabled during recovery.
[ 4.176826] kjournald starting. Commit interval 5 seconds
[ 4.176826] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 4.198292] ext3_orphan_cleanup: deleting unreferenced inode 286691
[ 4.198292] EXT3-fs: sda1: 1 orphan inode deleted
[ 4.198292] EXT3-fs: recovery complete.
[ 4.202168] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.818666] udevd version 125 started
[ 6.399733] Linux agpgart interface v0.103
[ 6.585725] ACPI: AC Adapter [ADP0] (on-line)
[ 6.598138] input: Power Button (FF) as /class/input/input1
[ 6.663497] ACPI: Power Button (FF) [PWRF]
[ 6.687224] ACPI: Battery Slot [BAT0] (battery present)
[ 6.687961] input: Lid Switch as /class/input/input2
[ 6.736411] ACPI: Lid Switch [LID]
[ 6.736610] input: Power Button (CM) as /class/input/input3
[ 6.781505] ACPI: Power Button (CM) [PWRB]
[ 6.817472] ACPI: device:04 is registered as cooling_device3
[ 6.817875] input: Video Bus as /class/input/input4
[ 6.875318] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.884844] ACPI: device:0a is registered as cooling_device4
[ 6.885096] input: Video Bus as /class/input/input5
[ 6.959399] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 7.404072] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
[ 7.404337] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 7.429956] hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
[ 7.527003] intel_rng: FWH not detected
[ 7.527415] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
[ 7.560262] Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10]
[ 7.560262] PCI: Bus 8, cardbus bridge: 0000:07:06.0
[ 7.560262] IO window: 0x00005400-0x000054ff
[ 7.560393] IO window: 0x00005800-0x000058ff
[ 7.560513] PREFETCH window: 0x54000000-0x543fffff
[ 7.560634] MEM window: 0x50000000-0x53ffffff
[ 7.560756] Yenta: Enabling burst memory read transactions
[ 7.560878] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 7.560996] Yenta: Routing CardBus interrupts to PCI
[ 7.561118] Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66
[ 7.754103] input: PC Speaker as /class/input/input6
[ 7.793202] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
[ 7.796082] Socket status: 30000006
[ 7.798095] Yenta: Raising subordinate bus# of parent bus (#07) from #07 to #0b
[ 7.798234] pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
[ 7.798356] cs: IO port probe 0x5000-0x5fff: clean.
[ 7.798859] pcmcia: parent PCI bridge Memory window: 0xf8a00000 - 0xf8afffff
[ 7.799012] ACPI: PCI Interrupt 0000:07:06.2[A] -> GSI 18 (level, low) -> IRQ 18
[ 7.845317] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26ks
[ 7.845453] iwl3945: Copyright(c) 2003-2008 Intel Corporation
[ 7.845704] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 7.845988] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 7.846011] iwl3945: Detected Intel Wireless WiFi Link 3945ABG
[ 7.906373] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 7.917344] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 8.141326] ACPI: PCI interrupt for device 0000:05:00.0 disabled
[ 8.212291] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa04713/0x0
[ 8.214562] synaptics: Toshiba Satellite A100 detected, limiting rate to 40pps.
[ 8.247238] input: SynPS/2 Synaptics TouchPad as /class/input/input7
[ 8.387035] cs: IO port probe 0x100-0x3af: clean.
[ 8.389035] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 8.390188] cs: IO port probe 0x820-0x8ff: clean.
[ 8.390262] cs: IO port probe 0xc00-0xcf7: clean.
[ 8.391270] cs: IO port probe 0xa00-0xaff: clean.
[ 8.834644] Adding 2650684k swap on /dev/sda5. Priority:-1 extents:1 across:2650684k
[ 84.734116] EXT3 FS on sda1, internal journal
[ 84.908403] loop: module loaded
[ 86.304584] kjournald starting. Commit interval 5 seconds
[ 86.314424] EXT3 FS on sda6, internal journal
[ 86.314424] EXT3-fs: mounted filesystem with ordered data mode.
[ 91.608329] NET: Registered protocol family 10
[ 91.608329] lo: Disabled Privacy Extensions
[ 91.608329] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 91.780790] lp: driver loaded but no devices found
[ 91.816389] ppdev: user-space parallel port driver
[ 95.162029] Bluetooth: Core ver 2.11
[ 95.163090] NET: Registered protocol family 31
[ 95.163090] Bluetooth: HCI device and connection manager initialized
[ 95.163239] Bluetooth: HCI socket layer initialized
[ 95.194023] Bluetooth: L2CAP ver 2.9
[ 95.194153] Bluetooth: L2CAP socket layer initialized
[ 95.263462] Bluetooth: RFCOMM socket layer initialized
[ 95.263462] Bluetooth: RFCOMM TTY layer initialized
[ 95.263462] Bluetooth: RFCOMM ver 1.8
[ 95.398538] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 95.398992] PM: Writing back config space on device 0000:05:00.0 at offset 1 (was 100002, writing 100006)
[ 95.398992] firmware: requesting iwlwifi-3945-1.ucode
[ 95.496169] Registered led device: iwl-phy0:radio
[ 95.496169] Registered led device: iwl-phy0:assoc
[ 95.496169] Registered led device: iwl-phy0:RX
[ 95.496169] Registered led device: iwl-phy0:TX
[ 95.504463] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 97.551182] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 97.610428] [fglrx] Maximum main memory to use for locked dma buffers: 928 MBytes.
[ 97.613704] [fglrx] vendor: 1002 device: 7145 count: 1
[ 97.613704] [fglrx] ioport: bar 1, base 0x2000, size: 0x100
[ 97.613704] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 97.613704] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 97.616617] [fglrx] Driver built-in PAT support is enabled successfully
[ 97.616675] [fglrx] module loaded - fglrx 8.56.4 [Dec 1 2008] with 1 minors
[ 99.679029] [fglrx] Gart USWC size:192 M.
[ 99.679029] [fglrx] Gart cacheable size:60 M.
[ 99.679029] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 99.679029] [fglrx] Reserved FB block: Unshared offset:7fb6000, size:45000
[ 99.679029] [fglrx] Reserved FB block: Unshared offset:7ffb000, size:5000
[ 126.580032] CPU0 attaching NULL sched-domain.
[ 126.580032] CPU1 attaching NULL sched-domain.
[ 126.584049] CPU0 attaching sched-domain:
[ 126.584049] domain 0: span 0-1
[ 126.584049] groups: 0 1
[ 126.584049] CPU1 attaching sched-domain:
[ 126.584049] domain 0: span 0-1
[ 126.584049] groups: 1 0
[ 130.110136] wlan0: Initial auth_alg=0
[ 130.110136] wlan0: authenticate with AP 00:13:10:0b:18:50
[ 130.111894] wlan0: RX authentication from 00:13:10:0b:18:50 (alg=0 transaction=2 status=0)
[ 130.111894] wlan0: authenticated
[ 130.111894] wlan0: associate with AP 00:13:10:0b:18:50
[ 130.117874] wlan0: RX AssocResp from 00:13:10:0b:18:50 (capab=0x411 status=0 aid=1)
[ 130.117882] wlan0: associated
[ 130.117900] wlan0: switched to short barker preamble (BSSID=00:13:10:0b:18:50)
[ 130.118304] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 144.719329] wlan0: no IPv6 routers present
[ 225.384946] CE: hpet increasing min_delta_ns to 15000 nsec
Voila, j’espere que vous pourrez m’aider 
J’ai convaincu la personne de passez sous debian et oublier windows
j’aimerait ne pas la decevoie xD
Merci d’avance, bonne journée a tous 
