Bon, j’ai activé le support ipv6 de la box. Je n’ai plus de “no ipv6 present” mais ça ne change rien, toujours déconnecté au bout d’un 1/4 d’heure environ (parfois 1/2 heure, parfois 5mn).
Voici mon dmesg après déconnexion:
[ 0.000000] BIOS EBDA/lowmem at: 0009dc00/0009dc00
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.28 (2.6.28) (root@bruno) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP PREEMPT Sat Jan 10 00:38:47 CET 2009
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
[ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfe80000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe80000 - 00000000bfe98000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfe98000 - 00000000bff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bff00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0xbfe80 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 10000-16000
[ 0.000000] RAMDISK: 378aa000 - 37feffda
[ 0.000000] Allocated new RAMDISK: 00480000 - 00bc5fda
[ 0.000000] Move RAMDISK from 00000000378aa000 - 0000000037feffd9 to 00480000 - 00bc5fd9
[ 0.000000] ACPI: RSDP 000F8020, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT BFE8F1BA, 0084 (r1 PTLTD XSDT 6040000 LTP 0)
[ 0.000000] ACPI: FACP BFE97E66, 00F4 (r3 VN896 PTLTW 6040000 PTL_ F4240)
[ 0.000000] ACPI: DSDT BFE932AE, 4B44 (r1 VIA PTL_ACPI 6040000 MSFT 100000E)
[ 0.000000] ACPI: FACS BFE98FC0, 0040
[ 0.000000] ACPI: APIC BFE97F5A, 006A (r1 PTLTD APIC 6040000 LTP 0)
[ 0.000000] ACPI: MCFG BFE97FC4, 003C (r1 PTLTD MCFG 6040000 LTP 0)
[ 0.000000] ACPI: SSDT BFE90AB1, 025F (r1 PmRef Cpu0Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFE90A0B, 00A6 (r1 PmRef Cpu7Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFE90965, 00A6 (r1 PmRef Cpu6Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFE908BF, 00A6 (r1 PmRef Cpu5Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFE90819, 00A6 (r1 PmRef Cpu4Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFE90773, 00A6 (r1 PmRef Cpu3Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFE906CD, 00A6 (r1 PmRef Cpu2Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFE90627, 00A6 (r1 PmRef Cpu1Tst 3000 INTL 20050228)
[ 0.000000] ACPI: SSDT BFE8F23E, 13E9 (r1 PmRef CpuPm 3000 INTL 20050228)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 2182MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 00000000 - 377fe000
[ 0.000000] bootmap 00012000 - 00018f00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 000047cae0] TEXT DATA BSS ==> [0000100000 - 000047cae0]
[ 0.000000] #4 [000047d000 - 0000480000] INIT_PG_TABLE ==> [000047d000 - 0000480000]
[ 0.000000] #5 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
[ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
[ 0.000000] #7 [0000480000 - 0000bc5fda] NEW RAMDISK ==> [0000480000 - 0000bc5fda]
[ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000]
[ 0.000000] found SMP MP-table at [c00f8050] 000f8050
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x000bfe80
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x000bfe80
[ 0.000000] On node 0 totalpages: 785933
[ 0.000000] free_area_init_node: node 0, pgdat c03a74c0, node_mem_map c1000200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3949 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4366 pages used for memmap
[ 0.000000] HighMem zone: 554356 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 2 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] PERCPU: Allocating 32768 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779791
[ 0.000000] Kernel command line: root=UUID=80568a19-0a80-46b6-9bd6-01a4bc04ffe6 ro quiet vga=786
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2393.612 MHz processor.
[ 0.004000] Console: colour dummy device 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 3106296k/3144192k available (1920k kernel code, 36556k reserved, 910k data, 304k init, 2234888k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff50000 - 0xfffff000 ( 700 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.004000] .init : 0xc03c9000 - 0xc0415000 ( 304 kB)
[ 0.004000] .data : 0xc02e0229 - 0xc03c3a78 ( 910 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02e0229 (1920 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004016] Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.22 BogoMIPS (lpj=9574448)
[ 0.004054] Security Framework initialized
[ 0.004062] SELinux: Disabled at boot.
[ 0.004075] Mount-cache hash table entries: 512
[ 0.004216] Initializing cgroup subsys ns
[ 0.004221] Initializing cgroup subsys cpuacct
[ 0.004222] Initializing cgroup subsys devices
[ 0.004244] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004246] CPU: L2 cache: 3072K
[ 0.004248] CPU: Physical Processor ID: 0
[ 0.004249] CPU: Processor Core ID: 0
[ 0.004252] Intel machine check architecture supported.
[ 0.004254] Intel machine check reporting enabled on CPU#0.
[ 0.004256] using mwait in idle threads.
[ 0.004267] Checking 'hlt' instruction... OK.
[ 0.020899] ACPI: Core revision 20080926
[ 0.032572] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 0.036001] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
[ 0.036001] ...trying to set up timer (IRQ0) through the 8259A ...
[ 0.036001] ..... (found apic 0 pin 0) ...
[ 0.077874] ....... works.
[ 0.077875] CPU0: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
[ 0.080001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4788.33 BogoMIPS (lpj=9576676)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 3072K
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] Intel machine check architecture supported.
[ 0.004000] Intel machine check reporting enabled on CPU#1.
[ 0.164549] CPU1: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.40GHz stepping 06
[ 0.164563] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.168024] Brought up 2 CPUs
[ 0.168027] Total of 2 processors activated (9575.56 BogoMIPS).
[ 0.168094] CPU0 attaching sched-domain:
[ 0.168097] domain 0: span 0-1 level MC
[ 0.168098] groups: 0 1
[ 0.168103] CPU1 attaching sched-domain:
[ 0.168104] domain 0: span 0-1 level MC
[ 0.168106] groups: 1 0
[ 0.168164] net_namespace: 776 bytes
[ 0.168164] Booting paravirtualized kernel on bare hardware
[ 0.168185] NET: Registered protocol family 16
[ 0.168185] ACPI: bus type pci registered
[ 0.168185] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 5
[ 0.168185] PCI: MCFG area at e0000000 reserved in E820
[ 0.168185] PCI: Using MMCONFIG for extended config space
[ 0.168185] PCI: Using configuration type 1 for base access
[ 0.168443] ACPI: EC: Look up EC in DSDT
[ 0.172010] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.172048] ACPI: Interpreter enabled
[ 0.172050] ACPI: (supports S0 S3 S4 S5)
[ 0.172061] ACPI: Using IOAPIC for interrupt routing
[ 0.180069] ACPI: EC: GPE = 0xb, I/O: command/status = 0x66, data = 0x62
[ 0.180069] ACPI: EC: driver started in interrupt mode
[ 0.180076] ACPI: No dock devices found.
[ 0.180084] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.180112] pci 0000:00:00.0: reg 10 32bit mmio: [0xd0000000-0xd7ffffff]
[ 0.180532] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.180536] pci 0000:00:02.0: PME# disabled
[ 0.180591] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.180595] pci 0000:00:03.0: PME# disabled
[ 0.180663] pci 0000:00:0f.0: reg 10 io port: [0x4cb0-0x4cb7]
[ 0.180670] pci 0000:00:0f.0: reg 14 io port: [0x4ca4-0x4ca7]
[ 0.180676] pci 0000:00:0f.0: reg 18 io port: [0x4ca8-0x4caf]
[ 0.180683] pci 0000:00:0f.0: reg 1c io port: [0x4ca0-0x4ca3]
[ 0.180690] pci 0000:00:0f.0: reg 20 io port: [0x4c80-0x4c8f]
[ 0.180696] pci 0000:00:0f.0: reg 24 io port: [0x4400-0x44ff]
[ 0.180764] pci 0000:00:0f.1: reg 20 io port: [0x4c90-0x4c9f]
[ 0.180845] pci 0000:00:10.0: reg 20 io port: [0x4c00-0x4c1f]
[ 0.180864] pci 0000:00:10.0: supports D1 D2
[ 0.180865] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.180869] pci 0000:00:10.0: PME# disabled
[ 0.184002] pci 0000:00:10.1: reg 20 io port: [0x4c20-0x4c3f]
[ 0.184002] pci 0000:00:10.1: supports D1 D2
[ 0.184002] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184002] pci 0000:00:10.1: PME# disabled
[ 0.184002] pci 0000:00:10.2: reg 20 io port: [0x4c40-0x4c5f]
[ 0.184002] pci 0000:00:10.2: supports D1 D2
[ 0.184002] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184002] pci 0000:00:10.2: PME# disabled
[ 0.184002] pci 0000:00:10.3: reg 20 io port: [0x4c60-0x4c7f]
[ 0.184002] pci 0000:00:10.3: supports D1 D2
[ 0.184002] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184002] pci 0000:00:10.3: PME# disabled
[ 0.184002] pci 0000:00:10.4: reg 10 32bit mmio: [0xdc400000-0xdc4000ff]
[ 0.184002] pci 0000:00:10.4: supports D1 D2
[ 0.184002] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184002] pci 0000:00:10.4: PME# disabled
[ 0.184002] pci 0000:00:12.0: reg 10 io port: [0x4800-0x48ff]
[ 0.184002] pci 0000:00:12.0: reg 14 32bit mmio: [0xdc400400-0xdc4004ff]
[ 0.184002] pci 0000:00:12.0: supports D1 D2
[ 0.184002] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.184002] pci 0000:00:12.0: PME# disabled
[ 0.184130] pci 0000:02:00.0: reg 10 32bit mmio: [0xd9000000-0xd9ffffff]
[ 0.184141] pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff]
[ 0.184152] pci 0000:02:00.0: reg 1c 64bit mmio: [0xda000000-0xdbffffff]
[ 0.184159] pci 0000:02:00.0: reg 24 io port: [0x5000-0x507f]
[ 0.184165] pci 0000:02:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.184228] pci 0000:00:02.0: bridge io port: [0x5000-0x5fff]
[ 0.184232] pci 0000:00:02.0: bridge 32bit mmio: [0xd9000000-0xdbffffff]
[ 0.184238] pci 0000:00:02.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff]
[ 0.184289] pci 0000:00:03.0: bridge io port: [0x6000-0x7fff]
[ 0.184293] pci 0000:00:03.0: bridge 32bit mmio: [0xd8800000-0xd8ffffff]
[ 0.184300] pci 0000:00:03.0: bridge 64bit mmio pref: [0xd8000000-0xd87fffff]
[ 0.184340] pci 0000:05:01.0: reg 10 64bit mmio: [0xdc000000-0xdc003fff]
[ 0.184370] pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
[ 0.184373] pci 0000:05:01.0: PME# disabled
[ 0.184426] pci 0000:00:13.0: bridge 32bit mmio: [0xdc000000-0xdc0fffff]
[ 0.184470] pci 0000:06:04.0: reg 10 32bit mmio: [0x000000-0x00007f]
[ 0.184509] pci 0000:06:04.0: supports D1 D2
[ 0.184511] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot
[ 0.184515] pci 0000:06:04.0: PME# disabled
[ 0.184548] pci 0000:06:04.1: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.184587] pci 0000:06:04.1: supports D1 D2
[ 0.184588] pci 0000:06:04.1: PME# supported from D0 D1 D2 D3hot
[ 0.184592] pci 0000:06:04.1: PME# disabled
[ 0.184627] pci 0000:06:04.3: reg 10 32bit mmio: [0x000000-0x0000ff]
[ 0.184667] pci 0000:06:04.3: supports D1 D2
[ 0.184668] pci 0000:06:04.3: PME# supported from D0 D1 D2 D3hot
[ 0.184672] pci 0000:06:04.3: PME# disabled
[ 0.184718] pci 0000:00:13.1: transparent bridge
[ 0.184724] pci 0000:00:13.1: bridge 32bit mmio: [0xdc100000-0xdc1fffff]
[ 0.184754] bus 00 -> node 0
[ 0.184758] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.185052] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGC._PRT]
[ 0.185125] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE0C._PRT]
[ 0.185204] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SP2P._PRT]
[ 0.185309] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PE._PRT]
[ 0.196073] ACPI: PCI Interrupt Link [ALKA] (IRQs 16 17 18 19 20 21 22 23) *9, disabled.
[ 0.196144] ACPI: PCI Interrupt Link [ALKB] (IRQs 16 17 18 19 20 21 22 23) *10, disabled.
[ 0.196166] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *11, disabled.
[ 0.196166] ACPI: PCI Interrupt Link [ALKD] (IRQs 21) *3, disabled.
[ 0.196242] ACPI: PCI Interrupt Link [LNKA] (IRQs *9 10 11 12)
[ 0.196342] ACPI: PCI Interrupt Link [LNKB] (IRQs 9 *10 11 12)
[ 0.196442] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11 12)
[ 0.196541] ACPI: PCI Interrupt Link [LNKD] (IRQs 9 10 11 12) *3
[ 0.196585] PCI: Using ACPI for IRQ routing
[ 0.204582] pnp: PnP ACPI init
[ 0.204588] ACPI: bus type pnp registered
[ 0.206954] pnp: PnP ACPI: found 10 devices
[ 0.206956] ACPI: ACPI bus type pnp unregistered
[ 0.206959] PnPBIOS: Disabled by ACPI PNP
[ 0.206967] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.206969] system 00:01: iomem range 0xf0012000-0xf0012fff has been reserved
[ 0.206972] system 00:01: iomem range 0xf0013000-0xf0013fff has been reserved
[ 0.206977] system 00:06: iomem range 0x0-0x9ffff could not be reserved
[ 0.206979] system 00:06: iomem range 0xd0000000-0xd7ffffff has been reserved
[ 0.206981] system 00:06: iomem range 0xe0000-0xfffff could not be reserved
[ 0.206983] system 00:06: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.206986] system 00:06: iomem range 0xffee0000-0xffefffff has been reserved
[ 0.206988] system 00:06: iomem range 0xfec00000-0xfec0ffff has been reserved
[ 0.206990] system 00:06: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 0.206994] system 00:07: ioport range 0x200-0x20f has been reserved
[ 0.206996] system 00:07: ioport range 0x400-0x40f has been reserved
[ 0.206997] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
[ 0.206999] system 00:07: ioport range 0xfe10-0xfe11 has been reserved
[ 0.207001] system 00:07: ioport range 0xfe00-0xfe00 has been reserved
[ 0.207003] system 00:07: ioport range 0x4000-0x407f has been reserved
[ 0.207005] system 00:07: ioport range 0x4100-0x411f has been reserved
[ 0.241841] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.241843] pci 0000:00:01.0: IO window: disabled
[ 0.241848] pci 0000:00:01.0: MEM window: disabled
[ 0.241851] pci 0000:00:01.0: PREFETCH window: disabled
[ 0.241859] pci 0000:02:00.0: BAR 6: can't allocate mem resource [0xd0000000-0xcfffffff]
[ 0.241866] pci 0000:00:02.0: PCI bridge, secondary bus 0000:02
[ 0.241869] pci 0000:00:02.0: IO window: 0x5000-0x5fff
[ 0.241873] pci 0000:00:02.0: MEM window: 0xd9000000-0xdbffffff
[ 0.241877] pci 0000:00:02.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff
[ 0.241884] pci 0000:00:03.0: PCI bridge, secondary bus 0000:03
[ 0.241886] pci 0000:00:03.0: IO window: 0x6000-0x7fff
[ 0.241892] pci 0000:00:03.0: MEM window: 0xd8800000-0xd8ffffff
[ 0.241896] pci 0000:00:03.0: PREFETCH window: 0x000000d8000000-0x000000d87fffff
[ 0.241903] pci 0000:00:13.0: PCI bridge, secondary bus 0000:05
[ 0.241905] pci 0000:00:13.0: IO window: disabled
[ 0.241909] pci 0000:00:13.0: MEM window: 0xdc000000-0xdc0fffff
[ 0.241913] pci 0000:00:13.0: PREFETCH window: disabled
[ 0.241928] pci 0000:00:13.1: PCI bridge, secondary bus 0000:06
[ 0.241929] pci 0000:00:13.1: IO window: disabled
[ 0.241934] pci 0000:00:13.1: MEM window: 0xdc100000-0xdc1fffff
[ 0.241937] pci 0000:00:13.1: PREFETCH window: disabled
[ 0.241951] pci 0000:00:01.0: setting latency timer to 64
[ 0.241957] pci 0000:00:02.0: power state changed by ACPI to D0
[ 0.241963] pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27
[ 0.241967] pci 0000:00:02.0: setting latency timer to 64
[ 0.241975] pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31
[ 0.241979] pci 0000:00:03.0: setting latency timer to 64
[ 0.241985] pci 0000:00:13.0: setting latency timer to 64
[ 0.241991] pci 0000:00:13.1: setting latency timer to 64
[ 0.241994] bus: 00 index 0 io port: [0x00-0xffff]
[ 0.241996] bus: 00 index 1 mmio: [0x000000-0xffffffff]
[ 0.241997] bus: 01 index 0 mmio: [0x0-0x0]
[ 0.241999] bus: 01 index 1 mmio: [0x0-0x0]
[ 0.242000] bus: 01 index 2 mmio: [0x0-0x0]
[ 0.242002] bus: 01 index 3 mmio: [0x0-0x0]
[ 0.242003] bus: 02 index 0 io port: [0x5000-0x5fff]
[ 0.242005] bus: 02 index 1 mmio: [0xd9000000-0xdbffffff]
[ 0.242006] bus: 02 index 2 mmio: [0xc0000000-0xcfffffff]
[ 0.242008] bus: 02 index 3 mmio: [0x0-0x0]
[ 0.242009] bus: 03 index 0 io port: [0x6000-0x7fff]
[ 0.242011] bus: 03 index 1 mmio: [0xd8800000-0xd8ffffff]
[ 0.242013] bus: 03 index 2 mmio: [0xd8000000-0xd87fffff]
[ 0.242014] bus: 03 index 3 mmio: [0x0-0x0]
[ 0.242015] bus: 05 index 0 mmio: [0x0-0x0]
[ 0.242017] bus: 05 index 1 mmio: [0xdc000000-0xdc0fffff]
[ 0.242018] bus: 05 index 2 mmio: [0x0-0x0]
[ 0.242020] bus: 05 index 3 mmio: [0x0-0x0]
[ 0.242021] bus: 06 index 0 mmio: [0x0-0x0]
[ 0.242023] bus: 06 index 1 mmio: [0xdc100000-0xdc1fffff]
[ 0.242024] bus: 06 index 2 mmio: [0x0-0x0]
[ 0.242025] bus: 06 index 3 io port: [0x00-0xffff]
[ 0.242027] bus: 06 index 4 mmio: [0x000000-0xffffffff]
[ 0.242048] NET: Registered protocol family 2
[ 0.252632] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.252818] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.253181] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.253383] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.253385] TCP reno registered
[ 0.256648] NET: Registered protocol family 1
[ 0.256730] checking if image is initramfs... it is
[ 0.702736] Freeing initrd memory: 7447k freed
[ 0.703684] audit: initializing netlink socket (disabled)
[ 0.703703] type=2000 audit(1233772587.700:1): initialized
[ 0.703928] highmem bounce pool size: 64 pages
[ 0.703933] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.704017] VFS: Disk quotas dquot_6.5.1
[ 0.704043] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.704096] msgmni has been set to 1718
[ 0.704202] alg: No test for stdrng (krng)
[ 0.704242] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.704245] io scheduler noop registered
[ 0.704247] io scheduler anticipatory registered
[ 0.704248] io scheduler deadline registered
[ 0.704258] io scheduler cfq registered (default)
[ 0.704278] PCI: VIA PCI bridge detected.Disabling DAC.
[ 0.740705] Switched to high resolution mode on CPU 1
[ 0.744123] Switched to high resolution mode on CPU 0
[ 8.704008] pci 0000:00:10.4: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 8.704041] pci 0000:02:00.0: Boot video device
[ 8.707490] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 8.707533] pcieport-driver 0000:00:02.0: found MSI capability
[ 8.707569] pcieport-driver 0000:00:02.0: irq 511 for MSI/MSI-X
[ 8.707583] pci_express 0000:00:02.0:pcie00: allocate port service
[ 8.707615] pci_express 0000:00:02.0:pcie01: allocate port service
[ 8.707641] pci_express 0000:00:02.0:pcie02: allocate port service
[ 8.707667] pci_express 0000:00:02.0:pcie03: allocate port service
[ 8.707747] pcieport-driver 0000:00:03.0: setting latency timer to 64
[ 8.707794] pcieport-driver 0000:00:03.0: found MSI capability
[ 8.707832] pcieport-driver 0000:00:03.0: irq 510 for MSI/MSI-X
[ 8.707848] pci_express 0000:00:03.0:pcie00: allocate port service
[ 8.707877] pci_express 0000:00:03.0:pcie01: allocate port service
[ 8.707906] pci_express 0000:00:03.0:pcie02: allocate port service
[ 8.707936] pci_express 0000:00:03.0:pcie03: allocate port service
[ 8.709677] aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support
[ 8.711294] aer 0000:00:03.0:pcie01: AER service couldn't init device: no _OSC support
[ 8.711482] vesafb: framebuffer at 0xdb000000, mapped to 0xf8080000, using 2400k, total 14336k
[ 8.711485] vesafb: mode is 640x480x32, linelength=2560, pages=1
[ 8.711486] vesafb: protected mode interface info at c000:b750
[ 8.711489] vesafb: pmi: set display start = c00cb7b3, set palette = c00cb80e
[ 8.711490] vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 8.711502] vesafb: scrolling: redraw
[ 8.711503] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 8.720960] Console: switching to colour frame buffer device 80x30
[ 8.730308] fb0: VESA VGA frame buffer device
[ 8.730358] isapnp: Scanning for PnP cards...
[ 9.040943] isapnp: No Plug & Play device found
[ 9.042659] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 9.043941] brd: module loaded
[ 9.044011] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 9.048112] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 9.050451] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.050456] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 9.050457] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 9.050459] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 9.050461] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 9.050566] mice: PS/2 mouse device common for all mice
[ 9.050858] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 9.050886] rtc0: alarms up to one year, y3k, 242 bytes nvram
[ 9.050912] cpuidle: using governor ladder
[ 9.050914] cpuidle: using governor menu
[ 9.050918] No iBFT detected.
[ 9.051213] TCP cubic registered
[ 9.051216] NET: Registered protocol family 17
[ 9.051225] Using IPI No-Shortcut mode
[ 9.051309] registered taskstats version 1
[ 9.051450] rtc_cmos 00:04: setting system clock to 2009-02-04 18:36:36 UTC (1233772596)
[ 9.051626] Freeing unused kernel memory: 304k freed
[ 9.136252] input: AT Translated Set 2 keyboard as /class/input/input0
[ 9.136737] ACPI: SSDT BFE915CB, 02A3 (r1 PmRef Cpu0Ist 3000 INTL 20050228)
[ 9.137648] ACPI: SSDT BFE90D10, 0518 (r1 PmRef Cpu0Cst 3001 INTL 20050228)
[ 9.139719] Monitor-Mwait will be used to enter C-1 state
[ 9.139832] processor ACPI_CPU:00: registered as cooling_device0
[ 9.139838] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 9.140252] ACPI: SSDT BFE9186E, 0234 (r1 PmRef Cpu1Ist 3000 INTL 20050228)
[ 9.140520] ACPI: SSDT BFE91228, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050228)
[ 9.141540] processor ACPI_CPU:01: registered as cooling_device1
[ 9.141545] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 9.282244] thermal LNXTHERM:01: registered as thermal_zone0
[ 9.285879] ACPI: Thermal Zone [THRM] (54 C)
[ 9.293873] thermal LNXTHERM:02: registered as thermal_zone1
[ 9.309875] ACPI: Thermal Zone [TZ0] (-73 C)
[ 9.536108] Uniform Multi-Platform E-IDE driver
[ 9.545994] SCSI subsystem initialized
[ 9.555546] libata version 3.00 loaded.
[ 9.556802] sata_via 0000:00:0f.0: version 2.4
[ 9.556821] sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 9.556849] sata_via 0000:00:0f.0: routed to hard irq line 10
[ 9.556894] scsi0 : sata_via
[ 9.556956] scsi1 : sata_via
[ 9.556977] ata1: SATA max UDMA/133 cmd 0x4cb0 ctl 0x4ca4 bmdma 0x4c80 irq 21
[ 9.556979] ata2: SATA max UDMA/133 cmd 0x4ca8 ctl 0x4ca0 bmdma 0x4c88 irq 21
[ 9.594161] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 9.597947] usbcore: registered new interface driver usbfs
[ 9.597972] usbcore: registered new interface driver hub
[ 9.598006] usbcore: registered new device driver usb
[ 9.599570] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 9.600663] uhci_hcd: USB Universal Host Controller Interface driver
[ 9.760012] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9.924334] ata1.00: ATA-7: ST9160823ASG, 3.AAB, max UDMA/133
[ 9.924336] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 9.940352] ata1.00: configured for UDMA/133
[ 10.160015] ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
[ 10.176089] scsi 0:0:0:0: Direct-Access ATA ST9160823ASG 3.AA PQ: 0 ANSI: 5
[ 10.176216] via82cxxx 0000:00:0f.1: VIA vt8237a (rev 00) IDE UDMA133
[ 10.176219] via82cxxx 0000:00:0f.1: IDE controller (0x1106:0x0571 rev 0x07)
[ 10.176285] VIA_IDE 0000:00:0f.1: power state changed by ACPI to D0
[ 10.176312] via82cxxx 0000:00:0f.1: not 100% native mode: will probe irqs later
[ 10.176318] ide0: BM-DMA at 0x4c90-0x4c97
[ 10.176324] ide1: BM-DMA at 0x4c98-0x4c9f
[ 10.176326] Probing IDE interface ide0...
[ 11.040108] hda: Optiarc DVD RW AD-7530B, ATAPI CD/DVD-ROM drive
[ 11.712033] hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4
[ 11.712340] hda: UDMA/33 mode selected
[ 11.714487] Probing IDE interface ide1...
[ 12.280041] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 12.280548] ide1 at 0x170-0x177,0x376 on irq 15
[ 12.280652] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 12.284785] eth0: VIA Rhine II at 0x14800, 00:90:f5:6d:f9:fe, IRQ 23.
[ 12.285496] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
[ 12.285706] ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 12.285762] ehci_hcd 0000:00:10.4: EHCI Host Controller
[ 12.285796] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1
[ 12.285825] ehci_hcd 0000:00:10.4: irq 21, io mem 0xdc400000
[ 12.296005] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00
[ 12.296065] usb usb1: configuration #1 chosen from 1 choice
[ 12.296086] hub 1-0:1.0: USB hub found
[ 12.296091] hub 1-0:1.0: 8 ports detected
[ 12.296182] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 12.296184] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.296186] usb usb1: Product: EHCI Host Controller
[ 12.296187] usb usb1: Manufacturer: Linux 2.6.28 ehci_hcd
[ 12.296188] usb usb1: SerialNumber: 0000:00:10.4
[ 12.296213] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 12.296220] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 12.296239] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 12.296267] uhci_hcd 0000:00:10.0: irq 20, io base 0x00004c00
[ 12.296320] usb usb2: configuration #1 chosen from 1 choice
[ 12.296339] hub 2-0:1.0: USB hub found
[ 12.296344] hub 2-0:1.0: 2 ports detected
[ 12.296403] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 12.296405] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.296407] usb usb2: Product: UHCI Host Controller
[ 12.296408] usb usb2: Manufacturer: Linux 2.6.28 uhci_hcd
[ 12.296410] usb usb2: SerialNumber: 0000:00:10.0
[ 12.296432] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
[ 12.296438] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 12.296454] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 12.296479] uhci_hcd 0000:00:10.1: irq 22, io base 0x00004c20
[ 12.296529] usb usb3: configuration #1 chosen from 1 choice
[ 12.296549] hub 3-0:1.0: USB hub found
[ 12.296555] hub 3-0:1.0: 2 ports detected
[ 12.296612] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 12.296613] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.296615] usb usb3: Product: UHCI Host Controller
[ 12.296616] usb usb3: Manufacturer: Linux 2.6.28 uhci_hcd
[ 12.296618] usb usb3: SerialNumber: 0000:00:10.1
[ 12.296925] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[ 12.296931] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 12.296951] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 12.296970] uhci_hcd 0000:00:10.2: irq 21, io base 0x00004c40
[ 12.297032] usb usb4: configuration #1 chosen from 1 choice
[ 12.297054] hub 4-0:1.0: USB hub found
[ 12.297059] hub 4-0:1.0: 2 ports detected
[ 12.297121] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 12.297122] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.297124] usb usb4: Product: UHCI Host Controller
[ 12.297126] usb usb4: Manufacturer: Linux 2.6.28 uhci_hcd
[ 12.297127] usb usb4: SerialNumber: 0000:00:10.2
[ 12.297143] uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 12.297148] uhci_hcd 0000:00:10.3: UHCI Host Controller
[ 12.297163] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
[ 12.297189] uhci_hcd 0000:00:10.3: irq 23, io base 0x00004c60
[ 12.297245] usb usb5: configuration #1 chosen from 1 choice
[ 12.297267] hub 5-0:1.0: USB hub found
[ 12.297271] hub 5-0:1.0: 2 ports detected
[ 12.297332] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 12.297334] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 12.297336] usb usb5: Product: UHCI Host Controller
[ 12.297337] usb usb5: Manufacturer: Linux 2.6.28 uhci_hcd
[ 12.297339] usb usb5: SerialNumber: 0000:00:10.3
[ 12.310899] Driver 'sd' needs updating - please use bus_type methods
[ 12.310988] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 12.311000] sd 0:0:0:0: [sda] Write Protect is off
[ 12.311002] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.311019] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.311067] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
[ 12.311078] sd 0:0:0:0: [sda] Write Protect is off
[ 12.311079] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 12.311097] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 12.311100] sda: sda1 sda2 sda3 sda4
[ 12.327793] sd 0:0:0:0: [sda] Attached SCSI disk
[ 12.331314] ide-cd driver 5.00
[ 12.340407] ide-cd: hda: ATAPI 24X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache
[ 12.340412] Uniform CD-ROM driver Revision: 3.20
[ 12.608010] usb 1-3: new high speed USB device using ehci_hcd and address 2
[ 12.692794] PM: Starting manual resume from disk
[ 12.725065] kjournald starting. Commit interval 5 seconds
[ 12.725070] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.829719] usb 1-3: configuration #1 chosen from 1 choice
[ 12.829869] usb 1-3: New USB device found, idVendor=174f, idProduct=6d51
[ 12.829871] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=10
[ 12.829873] usb 1-3: Product: USB2.0
[ 12.829874] usb 1-3: Manufacturer: Syntek
[ 12.829876] usb 1-3: SerialNumber: ??????????????????????????????????????????????????????????????????Syntek ?USB2.0 ?Audio
[ 12.940009] usb 1-7: new high speed USB device using ehci_hcd and address 3
[ 13.078513] usb 1-7: configuration #1 chosen from 1 choice
[ 13.079696] usb 1-7: New USB device found, idVendor=0bda, idProduct=8187
[ 13.079698] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 13.079700] usb 1-7: Product: RTL8187_Wireless
[ 13.079701] usb 1-7: Manufacturer: Manufacturer_Realtek_RTL8187_
[ 13.079703] usb 1-7: SerialNumber: 0015AFA1C314
[ 14.205447] udevd version 125 started
[ 14.676428] input: Power Button (FF) as /class/input/input1
[ 14.697816] ACPI: WMI: Mapper loaded
[ 14.704056] ACPI: Power Button (FF) [PWRF]
[ 14.704108] input: Power Button (CM) as /class/input/input2
[ 14.732058] ACPI: Power Button (CM) [PWB]
[ 14.797971] Linux agpgart interface v0.103
[ 14.817369] agpgart: Detected VIA P4M900 chipset
[ 14.824240] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xd0000000
[ 14.928954] acpi device:1c: registered as cooling_device2
[ 14.929045] input: Video Bus as /class/input/input3
[ 14.944928] ACPI: AC Adapter [AC] (on-line)
[ 14.945061] input: Sleep Button (CM) as /class/input/input4
[ 14.961697] ACPI: Video Device [PPB] (multi-head: yes rom: no post: no)
[ 14.987158] ACPI: Sleep Button (CM) [SLPB]
[ 15.010230] ACPI: Battery Slot [BAT0] (battery present)
[ 15.010553] input: Lid Switch as /class/input/input5
[ 15.042057] ACPI: Lid Switch [LID]
[ 15.170773] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.172684] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.272628] input: PC Speaker as /class/input/input6
[ 15.577072] ACPI Exception (thermal-0479): AE_ERROR, ACPI thermal trip point state changed
[ 15.577075] Please send acpidump to linux-acpi@vger.kernel.org
[ 15.577076] [20080926]
[ 15.661871] HDA Intel 0000:05:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 15.661974] HDA Intel 0000:05:01.0: setting latency timer to 64
[ 15.661978] HDA Intel 0000:05:01.0: PCI: Disallowing DAC for device
[ 15.952859] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x81a0b1, caps: 0xa04711/0xa04000
[ 15.990034] input: SynPS/2 Synaptics TouchPad as /class/input/input7
[ 17.580917] Adding 3903752k swap on /dev/sda1. Priority:-1 extents:1 across:3903752k
[ 18.139438] EXT3 FS on sda2, internal journal
[ 18.574498] loop: module loaded
[ 18.595536] cfg80211: Using static regulatory domain info
[ 18.595538] cfg80211: Regulatory domain: US
[ 18.595540] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 18.595542] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 18.595544] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 18.595545] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 18.595547] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 18.595549] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 18.595551] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 18.595552] cfg80211: Calling CRDA for country: US
[ 18.836260] phy0: Selected rate control algorithm 'pid'
[ 18.888806] phy0: hwaddr 00:15:af:a1:c3:14, RTL8187vB (default) V1 + rtl8225
[ 18.888823] usbcore: registered new interface driver rtl8187
[ 19.534449] fuse init (API version 7.10)
[ 19.764687] kjournald starting. Commit interval 5 seconds
[ 19.764842] EXT3 FS on sda3, internal journal
[ 19.764845] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.396420] NET: Registered protocol family 10
[ 23.396825] lo: Disabled Privacy Extensions
[ 23.930618] lp: driver loaded but no devices found
[ 23.968012] ppdev: user-space parallel port driver
[ 38.409499] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 38.910043] Bluetooth: Core ver 2.13
[ 38.911502] NET: Registered protocol family 31
[ 38.911505] Bluetooth: HCI device and connection manager initialized
[ 38.911509] Bluetooth: HCI socket layer initialized
[ 38.971694] Bluetooth: L2CAP ver 2.11
[ 38.971697] Bluetooth: L2CAP socket layer initialized
[ 39.051989] Bluetooth: RFCOMM socket layer initialized
[ 39.052027] Bluetooth: RFCOMM TTY layer initialized
[ 39.052030] Bluetooth: RFCOMM ver 1.10
[ 41.472621] eth0: link down
[ 41.472755] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.668502] nvidia: module license 'NVIDIA' taints kernel.
[ 41.921754] nvidia 0000:02:00.0: PCI INT A -> GSI 24 (level, low) -> IRQ 24
[ 41.921762] nvidia 0000:02:00.0: setting latency timer to 64
[ 41.922647] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.22 Tue Jan 6 09:29:08 PST 2009
[ 52.857503] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 56.257391] wlan0: authenticate with AP ca:f4:25:07:dc:90
[ 56.433324] wlan0: authenticate with AP ca:f4:25:07:dc:90
[ 56.437017] wlan0: authenticated
[ 56.437024] wlan0: associate with AP ca:f4:25:07:dc:90
[ 56.439458] wlan0: RX AssocResp from ca:f4:25:07:dc:90 (capab=0x411 status=0 aid=2)
[ 56.439462] wlan0: associated
[ 56.439775] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 132.645478] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 132.656720] wlan0: deauthenticating by local choice (reason=3)
[ 142.637513] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 145.589358] wlan0: direct probe to AP 00:14:d1:4d:10:97 try 1
[ 145.941355] wlan0: direct probe to AP 00:14:d1:4d:10:97 try 1
[ 145.943985] wlan0 direct probe responded
[ 145.943990] wlan0: authenticate with AP 00:14:d1:4d:10:97
[ 145.946109] wlan0: authenticated
[ 145.946113] wlan0: associate with AP 00:14:d1:4d:10:97
[ 145.948612] wlan0: RX AssocResp from 00:14:d1:4d:10:97 (capab=0x411 status=0 aid=1)
[ 145.948616] wlan0: associated
[ 145.948870] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 509.065056] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 2195.371704] wlan0: deauthenticated
[ 2196.368020] wlan0: direct probe to AP 00:14:d1:4d:10:97 try 1
[ 2196.568020] wlan0: direct probe to AP 00:14:d1:4d:10:97 try 2
[ 2196.768016] wlan0: direct probe to AP 00:14:d1:4d:10:97 try 3
[ 2196.968612] wlan0: direct probe to AP 00:14:d1:4d:10:97 timed out
[ 2200.133385] wlan0: direct probe to AP 00:14:d1:4d:10:97 try 1
[ 2200.313316] wlan0: direct probe to AP 00:14:d1:4d:10:97 try 1
[ 2200.512013] wlan0: direct probe to AP 00:14:d1:4d:10:97 try 2
[ 2200.712012] wlan0: direct probe to AP 00:14:d1:4d:10:97 try 3
[ 2200.912026] wlan0: direct probe to AP 00:14:d1:4d:10:97 timed out
[ 2220.021524] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2228.897425] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 2232.017338] wlan0: direct probe to AP 00:14:d1:4d:10:97 try 1
[ 2232.193393] wlan0: direct probe to AP 00:14:d1:4d:10:97 try 1
[ 2232.392026] wlan0: direct probe to AP 00:14:d1:4d:10:97 try 2
[ 2232.592023] wlan0: direct probe to AP 00:14:d1:4d:10:97 try 3
[ 2232.792021] wlan0: direct probe to AP 00:14:d1:4d:10:97 timed out
Tiens nous au courant!
