Merci d’avoir répondu aussi vite…
oula sa va etre super long… 
Desolé pour la tartine…
bobland:/home/pierre# dmesg | less
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfc6c000 (usable)
[ 0.000000] BIOS-e820: 00000000bfc6c000 - 00000000bfcbf000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfcbf000 - 00000000bfd83000 (usable)
[ 0.000000] BIOS-e820: 00000000bfd83000 - 00000000bfdbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfdbf000 - 00000000bfde8000 (usable)
[ 0.000000] BIOS-e820: 00000000bfde8000 - 00000000bfdff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfdff000 - 00000000bfe00000 (usable)
[ 0.000000] BIOS-e820: 00000000bfe00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] 2174MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 785920) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 785920
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 785920
[ 0.000000] On node 0 totalpages: 785920
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 4348 pages used for memmap
[ 0.000000] HighMem zone: 552196 pages, LIFO batch:31
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 HP )
[ 0.000000] ACPI: XSDT BFDFE120, 006C (r1 HPQOEM SLIC-MPC 1 1000013)
[ 0.000000] ACPI: FACP BFDFC000, 00F4 (r4 HP VADER 1 MSFT 1000013)
[ 0.000000] ACPI: DSDT BFDED000, A5AA (r1 HP VADER 1 MSFT 1000013)
[ 0.000000] ACPI: FACS BFD8C000, 0040
[ 0.000000] ACPI: SSDT BFDFD000, 0655 (r1 PmRef CpuPm 3000 INTL 20060912)
[ 0.000000] ACPI: HPET BFDFB000, 0038 (r1 HPQOEM SLIC-MPC 1 MSFT 1000013)
[ 0.000000] ACPI: APIC BFDFA000, 006C (r2 HPQOEM SLIC-MPC 1 MSFT 1000013)
[ 0.000000] ACPI: MCFG BFDF9000, 003C (r1 HPQOEM SLIC-MPC 1 MSFT 1000013)
[ 0.000000] ACPI: ASF! BFDF8000, 00A5 (r32 HPQOEM SLIC-MPC 1 MSFT 1000013)
[ 0.000000] ACPI: SLIC BFDEC000, 0176 (r1 HPQOEM SLIC-MPC 1 LOHR F4240)
[ 0.000000] ACPI: BOOT BFDEB000, 0028 (r1 HPQOEM SLIC-MPC 1 MSFT 1000013)
[ 0.000000] ACPI: SSDT BFDEA000, 0296 (r1 INTEL SataAhci 1000 INTL 20060912)
[ 0.000000] ACPI: DMI detected: Hewlett-Packard
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at c4000000 (gap: c0000000:38000000)
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 4
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 779780
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1993.980 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 3106792k/3143680k available (1769k kernel code, 35008k reserved, 752k data, 244k init, 2225512k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
[ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.083951] Calibrating delay using timer specific routine.. 3996.65 BogoMIPS (lpj=7993311)
[ 0.084005] Security Framework initialized
[ 0.084005] SELinux: Disabled at boot.
[ 0.084005] Capability LSM initialized
[ 0.084005] Mount-cache hash table entries: 512
[ 0.084005] Initializing cgroup subsys ns
[ 0.084005] Initializing cgroup subsys cpuacct
[ 0.084005] Initializing cgroup subsys devices
[ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084005] CPU: L2 cache: 2048K
[ 0.084005] CPU: Physical Processor ID: 0
[ 0.084005] CPU: Processor Core ID: 0
[ 0.084005] Intel machine check architecture supported.
[ 0.084005] Intel machine check reporting enabled on CPU#0.
[ 0.084005] using mwait in idle threads.
[ 0.084005] Checking 'hlt' instruction... OK.
[ 0.100006] ACPI: Core revision 20080321
[ 0.136008] ENABLING IO-APIC IRQs
[ 0.136008] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.175736] CPU0: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz stepping 0d
[ 0.176011] Booting processor 1/1 ip 6000
[ 0.184011] Initializing CPU#1
[ 0.184011] Calibrating delay using timer specific routine.. 3989.97 BogoMIPS (lpj=7979944)
[ 0.184011] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.184011] CPU: L2 cache: 2048K
[ 0.184011] CPU: Physical Processor ID: 0
[ 0.184011] CPU: Processor Core ID: 1
[ 0.184011] Intel machine check architecture supported.
[ 0.184011] Intel machine check reporting enabled on CPU#1.
[ 0.264016] CPU1: Intel(R) Core(TM)2 Duo CPU T5800 @ 2.00GHz stepping 0d
[ 0.264016] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.268016] Brought up 2 CPUs
[ 0.268016] Total of 2 processors activated (7986.62 BogoMIPS).
[ 0.268016] CPU0 attaching sched-domain:
[ 0.268016] domain 0: span 0-1
[ 0.268016] groups: 0 1
[ 0.268016] CPU1 attaching sched-domain:
[ 0.268016] domain 0: span 0-1
[ 0.268016] groups: 1 0
[ 0.268016] net_namespace: 660 bytes
[ 0.268016] Booting paravirtualized kernel on bare hardware
[ 0.268016] NET: Registered protocol family 16
[ 0.268016] ACPI: bus type pci registered
[ 0.268016] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.268016] PCI: MCFG area at f8000000 reserved in E820
[ 0.268016] PCI: Using MMCONFIG for extended config space
[ 0.268016] domain 0: span 0-1
[ 0.268016] groups: 0 1
[ 0.268016] CPU1 attaching sched-domain:
[ 0.268016] domain 0: span 0-1
[ 0.268016] groups: 1 0
[ 0.268016] net_namespace: 660 bytes
[ 0.268016] Booting paravirtualized kernel on bare hardware
[ 0.268016] NET: Registered protocol family 16
[ 0.268016] ACPI: bus type pci registered
[ 0.268016] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.268016] PCI: MCFG area at f8000000 reserved in E820
[ 0.268016] PCI: Using MMCONFIG for extended config space
[ 0.268016] PCI: Using configuration type 1 for base access
[ 0.268016] Setting up standard PCI resources
[ 0.276017] ACPI: EC: Look up EC in DSDT
[ 0.325367] ACPI: BIOS _OSI(Linux) query ignored via DMI
[ 0.333362] ACPI: Interpreter enabled
[ 0.333365] ACPI: (supports S0 S3 S4 S5)
[ 0.333385] ACPI: Using IOAPIC for interrupt routing
[ 0.336438] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.631862] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.631862] ACPI: EC: driver started in interrupt mode
[ 0.631862] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.634894] PCI: Transparent bridge - 0000:00:1e.0
[ 0.634962] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.638528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.638528] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.638546] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.638727] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.638908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.639093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
[ 0.639294] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
[ 0.647214] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.647363] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.647509] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.647653] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.647798] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.647943] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.648087] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.648234] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.652399] ACPI: Power Resource [FN00] (on)
[ 0.653168] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.653730] pnp: PnP ACPI init
[ 0.653737] ACPI: bus type pnp registered
[ 0.768602] pnp: PnP ACPI: found 11 devices
[ 0.768602] ACPI: ACPI bus type pnp unregistered
[ 0.768602] PnPBIOS: Disabled by ACPI PNP
[ 0.768602] PCI: Using ACPI for IRQ routing
[ 0.773556] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.773561] hpet0: 4 64-bit timers, 14318180 Hz
[ 0.776025] ACPI: RTC can wake from S4
[ 0.778967] Switched to high resolution mode on CPU 0
[ 0.779497] Switched to high resolution mode on CPU 1
[ 0.782941] system 00:01: ioport range 0x164e-0x164f has been reserved
[ 0.782944] system 00:01: ioport range 0x600-0x60f has been reserved
[ 0.782947] system 00:01: ioport range 0x610-0x610 has been reserved
[ 0.782951] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.782953] system 00:01: ioport range 0x810-0x817 has been reserved
[ 0.782956] system 00:01: ioport range 0x820-0x823 has been reserved
[ 0.782958] system 00:01: ioport range 0x400-0x47f has been reserved
[ 0.782961] system 00:01: ioport range 0x500-0x53f has been reserved
[ 0.782964] system 00:01: iomem range 0xf8000000-0xfbffffff could not be reserved
[ 0.782967] system 00:01: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 0.782970] system 00:01: iomem range 0xfed10000-0xfed13fff could not be reserved
[ 0.782973] system 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 0.782976] system 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 0.782978] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.782981] system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
[ 0.782984] system 00:01: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.813993] PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
[ 0.813993] PCI: Bridge: 0000:00:01.0
[ 0.813993] IO window: 8000-8fff
[ 0.813993] MEM window: 0xd0000000-0xd2ffffff
[ 0.813993] PREFETCH window: 0x00000000c0000000-0x00000000cfffffff
[ 0.813993] PCI: Bridge: 0000:00:1c.0
[ 0.813993] IO window: 7000-7fff
[ 0.813993] MEM window: 0xde200000-0xdf2fffff
[ 0.813993] PREFETCH window: 0x00000000d3000000-0x00000000d3ffffff
[ 0.813993] PCI: Bridge: 0000:00:1c.1
[ 0.813993] IO window: 6000-6fff
[ 0.813993] MEM window: 0xdd200000-0xde1fffff
[ 0.813993] PREFETCH window: 0x00000000d4000000-0x00000000d4ffffff
[ 0.813993] PCI: Bridge: 0000:00:1c.2
[ 0.813993] IO window: 5000-5fff
[ 0.813993] MEM window: 0xdc200000-0xdd1fffff
[ 0.813993] PREFETCH window: 0x00000000d5000000-0x00000000d5ffffff
[ 0.813993] PCI: Bridge: 0000:00:1c.3
[ 0.813993] IO window: 3000-4fff
[ 0.813993] MEM window: 0xdb200000-0xdc1fffff
[ 0.813993] PREFETCH window: 0x00000000d6000000-0x00000000d70fffff
[ 0.813993] PCI: Bridge: 0000:00:1c.4
[ 0.813993] IO window: 2000-2fff
[ 0.813993] MEM window: 0xda100000-0xdb1fffff
[ 0.813993] PREFETCH window: 0x00000000d7100000-0x00000000d80fffff
[ 0.813993] PCI: Bridge: 0000:00:1c.5
[ 0.813993] IO window: 1000-1fff
[ 0.813993] MEM window: 0xd9100000-0xda0fffff
[ 0.813993] PREFETCH window: 0x00000000d8100000-0x00000000d90fffff
[ 0.813993] PCI: Bridge: 0000:00:1e.0
[ 0.813993] IO window: disabled
[ 0.813993] MEM window: 0xdb200000-0xdc1fffff
[ 0.813993] PREFETCH window: 0x00000000d6000000-0x00000000d70fffff
[ 0.813993] PCI: Bridge: 0000:00:1c.4
[ 0.813993] IO window: 2000-2fff
[ 0.813993] MEM window: 0xda100000-0xdb1fffff
[ 0.813993] PREFETCH window: 0x00000000d7100000-0x00000000d80fffff
[ 0.813993] PCI: Bridge: 0000:00:1c.5
[ 0.813993] IO window: 1000-1fff
[ 0.813993] MEM window: 0xd9100000-0xda0fffff
[ 0.813993] PREFETCH window: 0x00000000d8100000-0x00000000d90fffff
[ 0.813993] PCI: Bridge: 0000:00:1e.0
[ 0.813993] IO window: disabled.
[ 0.813993] MEM window: disabled.
[ 0.813993] PREFETCH window: disabled.
[ 0.813993] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.813993] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.813993] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.813993] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.813993] pci 0000:00:1c.1: enabling device (0000 -> 0003)
[ 0.813993] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.813993] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.813993] pci 0000:00:1c.2: enabling device (0000 -> 0003)
[ 0.813993] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.813993] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.813993] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 0.813993] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.813993] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.813993] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 0.813993] pci 0000:00:1c.5: enabling device (0000 -> 0003)
[ 0.813993] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.813993] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.813993] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.813993] NET: Registered protocol family 2
[ 0.826047] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.826254] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.829993] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.829993] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.829993] TCP reno registered
[ 0.834064] NET: Registered protocol family 1
[ 0.834160] checking if image is initramfs... it is
[ 1.314001] Freeing initrd memory: 6160k freed
[ 1.314001] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 1.314001] Simple Boot Flag at 0x44 set to 0x1
[ 1.315001] audit: initializing netlink socket (disabled)
[ 1.315001] type=2000 audit(1235319506.304:1): initialized
[ 1.315001] highmem bounce pool size: 64 pages
[ 1.315001] Total HugeTLB memory allocated, 0
[ 1.315001] VFS: Disk quotas dquot_6.5.1
[ 1.315001] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.315001] msgmni has been set to 1734
[ 1.315001] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.315001] io scheduler noop registered
[ 1.315001] io scheduler anticipatory registered
[ 1.315001] io scheduler deadline registered
[ 1.315001] io scheduler cfq registered (default)
[ 11.244939] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 20.767662] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 20.767809] pci 0000:01:00.0: Boot video device
[ 20.771656] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 20.771656] assign_interrupt_mode Found MSI capability
[ 20.771656] Allocate Port Service[0000:00:01.0:pcie00]
[ 20.771656] Allocate Port Service[0000:00:01.0:pcie02]
[ 20.771656] Allocate Port Service[0000:00:01.0:pcie03]
[ 20.771656] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 20.771693] assign_interrupt_mode Found MSI capability
[ 20.771739] Allocate Port Service[0000:00:1c.0:pcie00]
[ 20.772149] Allocate Port Service[0000:00:1c.0:pcie02]
[ 20.772149] Allocate Port Service[0000:00:1c.0:pcie03]
[ 20.772149] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 20.772149] assign_interrupt_mode Found MSI capability
[ 20.772149] Allocate Port Service[0000:00:1c.1:pcie00]
[ 20.772149] Allocate Port Service[0000:00:1c.1:pcie02]
[ 20.772149] Allocate Port Service[0000:00:1c.1:pcie03]
[ 20.772149] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 20.772149] assign_interrupt_mode Found MSI capability
[ 20.772149] Allocate Port Service[0000:00:1c.2:pcie00]
[ 20.772149] Allocate Port Service[0000:00:1c.2:pcie02]
[ 20.772149] Allocate Port Service[0000:00:1c.2:pcie03]
[ 20.772149] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 20.772149] assign_interrupt_mode Found MSI capability
[ 20.772149] Allocate Port Service[0000:00:1c.3:pcie00]
[ 20.772149] Allocate Port Service[0000:00:1c.3:pcie02]
[ 20.772149] Allocate Port Service[0000:00:1c.3:pcie03]
[ 20.772149] PCI: Setting latency timer of device 0000:00:1c.4 to 64
[ 20.772149] assign_interrupt_mode Found MSI capability
[ 20.772149] Allocate Port Service[0000:00:1c.4:pcie00]
[ 20.772149] Allocate Port Service[0000:00:1c.4:pcie02]
[ 20.772149] Allocate Port Service[0000:00:1c.4:pcie03]
[ 20.772149] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 20.772149] assign_interrupt_mode Found MSI capability
[ 20.772149] Allocate Port Service[0000:00:1c.5:pcie00]
[ 20.772149] Allocate Port Service[0000:00:1c.5:pcie02]
[ 20.772149] Allocate Port Service[0000:00:1c.5:pcie03]
[ 20.772149] isapnp: Scanning for PnP cards...
[ 21.132104] isapnp: No Plug & Play device found
[ 21.132105] hpet_resources: 0xfed00000 is busy
[ 21.132105] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 21.136107] brd: module loaded
[ 21.136107] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 21.186239] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 21.186244] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 21.188143] mice: PS/2 mouse device common for all mice
[ 21.188143] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 21.188143] rtc0: alarms up to one month
[ 21.188143] cpuidle: using governor ladder
[ 21.188143] cpuidle: using governor menu
[ 21.188143] No iBFT detected.
[ 21.188143] TCP cubic registered
[ 21.188143] NET: Registered protocol family 17
[ 21.188143] Using IPI No-Shortcut mode
[ 21.188143] registered taskstats version 1
[ 21.188143] rtc_cmos 00:03: setting system clock to 2009-02-22 16:18:43 UTC (1235319523)
[ 21.188143] Freeing unused kernel memory: 244k freed
[ 21.228529] input: AT Translated Set 2 keyboard as /class/input/input0
[ 21.270002] ACPI: PNP0C0B:00 is registered as cooling_device0
[ 21.270002] ACPI: Fan [FAN] (on)
[ 21.310631] ACPI: SSDT BFC77C18, 0265 (r1 PmRef Cpu0Ist 3000 INTL 20060912)
[ 21.310631] ACPI: SSDT BFC75618, 0594 (r1 PmRef Cpu0Cst 3001 INTL 20060912)
[ 21.314001] Monitor-Mwait will be used to enter C-1 state
[ 21.314001] Monitor-Mwait will be used to enter C-2 state
[ 21.314001] Monitor-Mwait will be used to enter C-3 state
[ 21.314001] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 21.314001] ACPI: ACPI0007:00 is registered as cooling_device1
[ 21.314001] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 21.314001] ACPI: SSDT BFC76E18, 01CF (r1 PmRef ApIst 3000 INTL 20060912)
[ 21.314001] ACPI: SSDT BFC77F18, 008D (r1 PmRef ApCst 3000 INTL 20060912)
[ 21.314001] Marking TSC unstable due to: TSC halts in idle.
[ 21.314001] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 21.314001] ACPI: ACPI0007:01 is registered as cooling_device2
[ 21.314001] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 21.324668] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 21.343829] ACPI: Thermal Zone [THRM] (43 C)
[ 21.635907] usbcore: registered new interface driver usbfs
[ 21.635931] usbcore: registered new interface driver hub
[ 21.635973] usbcore: registered new device driver usb
[ 21.636864] USB Universal Host Controller Interface driver v3.0
[ 21.636900] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 21.636911] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 21.636914] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 21.637020] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 21.637057] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000090e0
[ 21.637125] usb usb1: configuration #1 chosen from 1 choice
[ 21.637151] hub 1-0:1.0: USB hub found
[ 21.637156] hub 1-0:1.0: 2 ports detected
[ 21.712245] sdhci: Secure Digital Host Controller Interface driver
[ 21.712248] sdhci: Copyright(c) Pierre Ossman
[ 21.738798] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 21.738801] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 21.738804] usb usb1: Product: UHCI Host Controller
[ 21.738806] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 21.314001] Marking TSC unstable due to: TSC halts in idle.
[ 21.314001] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 21.314001] ACPI: ACPI0007:01 is registered as cooling_device2
[ 21.314001] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 21.324668] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 21.343829] ACPI: Thermal Zone [THRM] (43 C)
[ 21.635907] usbcore: registered new interface driver usbfs
[ 21.635931] usbcore: registered new interface driver hub
[ 21.635973] usbcore: registered new device driver usb
[ 21.636864] USB Universal Host Controller Interface driver v3.0
[ 21.636900] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 21.636911] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 21.636914] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 21.637020] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 21.637057] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000090e0
[ 21.637125] usb usb1: configuration #1 chosen from 1 choice
[ 21.637151] hub 1-0:1.0: USB hub found
[ 21.637156] hub 1-0:1.0: 2 ports detected
[ 21.712245] sdhci: Secure Digital Host Controller Interface driver
[ 21.712248] sdhci: Copyright(c) Pierre Ossman
[ 21.738798] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 21.738801] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 21.738804] usb usb1: Product: UHCI Host Controller
[ 21.738806] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 21.738808] usb usb1: SerialNumber: 0000:00:1a.0
[ 21.738895] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 21.738905] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 21.738909] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 21.738930] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 21.738965] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000090c0
[ 21.739038] usb usb2: configuration #1 chosen from 1 choice
[ 21.739062] hub 2-0:1.0: USB hub found
[ 21.739068] hub 2-0:1.0: 2 ports detected
[ 21.762768] No dock devices found.
[ 21.782401] SCSI subsystem initialized
[ 21.799547] libata version 3.00 loaded.
[ 21.847633] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 21.847639] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 21.847643] usb usb2: Product: UHCI Host Controller
[ 21.847652] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 21.847654] usb usb2: SerialNumber: 0000:00:1a.1
[ 21.847803] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 21.847818] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 21.847822] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 21.847844] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 21.852540] ehci_hcd 0000:00:1a.7: debug port 1
[ 21.852547] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 21.852559] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xdf304c00
[ 21.868222] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 21.868311] usb usb3: configuration #1 chosen from 1 choice
[ 21.868352] hub 3-0:1.0: USB hub found
[ 21.868360] hub 3-0:1.0: 4 ports detected
[ 21.972017] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 21.972022] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 21.972026] usb usb3: Product: EHCI Host Controller
[ 21.972029] usb usb3: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 21.972032] usb usb3: SerialNumber: 0000:00:1a.7
[ 21.972244] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 21.972253] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 21.972257] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 21.972276] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 21.972307] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000090a0
[ 21.972372] usb usb4: configuration #1 chosen from 1 choice
[ 21.972398] hub 4-0:1.0: USB hub found
[ 21.972403] hub 4-0:1.0: 2 ports detected
[ 21.979783] Clocksource tsc unstable (delta = -143419983 ns)
[ 22.075647] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 22.075651] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 22.075655] usb usb4: Product: UHCI Host Controller
[ 22.075658] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 22.075661] usb usb4: SerialNumber: 0000:00:1d.0
[ 22.075730] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
[ 22.075737] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 22.075741] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 22.075760] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[ 22.075790] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00009080
[ 22.075855] usb usb5: configuration #1 chosen from 1 choice
[ 22.075881] hub 5-0:1.0: USB hub found
[ 22.075886] hub 5-0:1.0: 2 ports detected
[ 22.179265] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 22.179270] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 22.179274] usb usb5: Product: UHCI Host Controller
[ 22.179277] usb usb5: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 22.179280] usb usb5: SerialNumber: 0000:00:1d.1
[ 22.179346] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 22.179354] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 22.179357] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 22.179377] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[ 22.179404] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009060
[ 22.179469] usb usb6: configuration #1 chosen from 1 choice
[ 22.179493] hub 6-0:1.0: USB hub found
[ 22.179498] hub 6-0:1.0: 2 ports detected
[ 22.283612] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 22.283616] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 22.283620] usb usb6: Product: UHCI Host Controller
[ 22.283623] usb usb6: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 22.283626] usb usb6: SerialNumber: 0000:00:1d.2
[ 22.283696] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 22.283703] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 22.283707] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 22.283728] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 7
[ 22.283760] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00009040
[ 22.283826] usb usb7: configuration #1 chosen from 1 choice
[ 22.283851] hub 7-0:1.0: USB hub found
[ 22.283856] hub 7-0:1.0: 2 ports detected
[ 22.387199] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 22.387203] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 22.387207] usb usb7: Product: UHCI Host Controller
[ 22.387210] usb usb7: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 22.387213] usb usb7: SerialNumber: 0000:00:1d.3
[ 22.387353] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 22.387363] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 22.387367] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 22.387391] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 8
[ 22.394526] ehci_hcd 0000:00:1d.7: debug port 1
[ 22.394526] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 22.394526] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdf304800
[ 22.409533] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 22.409634] usb usb8: configuration #1 chosen from 1 choice
[ 22.409678] hub 8-0:1.0: USB hub found
[ 22.409683] hub 8-0:1.0: 8 ports detected
[ 22.513170] usb usb8: New USB device found, idVendor=1d6b, idProduct=0002
[ 22.513175] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 22.513179] usb usb8: Product: EHCI Host Controller
[ 22.513182] usb usb8: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 22.513185] usb usb8: SerialNumber: 0000:00:1d.7
[ 22.514585] ahci 0000:00:1f.2: version 3.0
[ 22.514585] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 21 (level, low) -> IRQ 21
[ 22.514585] r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
[ 22.514585] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 22.514585] PCI: Setting latency timer of device 0000:05:00.0 to 64
[ 22.514585] eth0: RTL8168c/8111c at 0xf8860000, 00:1e:ec:f4:b5:f4, XID 3c4000c0 IRQ 215
[ 22.514585] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 22.514585] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 22.567434] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[da100000-da1007ff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 22.578324] sdhci: SDHCI controller found at 0000:06:00.2 [197b:2381] (rev 0)
[ 22.578350] ACPI: PCI Interrupt 0000:06:00.2[A] -> GSI 16 (level, low) -> IRQ 16
[ 22.578374] PCI: Setting latency timer of device 0000:06:00.2 to 64
[ 22.578408] mmc0: SDHCI at 0xda100a00 irq 16 DMA
[ 22.825288] usb 8-5: new high speed USB device using ehci_hcd and address 2
[ 22.962823] usb 8-5: configuration #1 chosen from 1 choice
[ 22.964853] usb 8-5: New USB device found, idVendor=090c, idProduct=c371
[ 22.964853] usb 8-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 22.964853] usb 8-5: Product: HP Webcam
[ 22.964853] usb 8-5: Manufacturer: Image Processor
[ 23.526908] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 23.526914] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
[ 23.526922] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 23.530912] scsi0 : ahci
[ 23.530913] scsi1 : ahci
[ 23.530948] scsi2 : ahci
[ 23.530979] scsi3 : ahci
[ 23.531003] scsi4 : ahci
[ 23.531025] scsi5 : ahci
[ 23.531025] ata1: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304100 irq 216
[ 23.531025] ata2: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304180 irq 216
[ 23.531025] ata3: DUMMY
[ 23.531025] ata4: DUMMY
[ 23.531025] ata5: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304300 irq 216
[ 23.531025] ata6: SATA max UDMA/133 abar m2048@0xdf304000 port 0xdf304380 irq 216
[ 23.856711] ieee1394: Host added: ID:BUS[0-00:1023] GUID[8b3f0200cb1c40d9]
[ 24.014406] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 24.015439] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 24.015439] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 succeeded
[ 24.015693] ata1.00: ACPI cmd ef/10:02:00:00:00:a0 succeeded
[ 24.015693] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 24.015699] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 succeeded
[ 24.015993] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 succeeded
[ 24.016240] ata1.00: ATA-8: FUJITSU MHZ2320BH G2, 8909, max UDMA/100
[ 24.016240] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 24.017471] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 24.017471] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 succeeded
[ 24.017471] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 24.017728] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 succeeded
[ 24.017728] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 succeeded
[ 24.018290] ata1.00: configured for UDMA/100
[ 24.352674] ata2: SATA link down (SStatus 0 SControl 300)
[ 24.851096] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 24.855804] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 24.856446] ata5.00: ACPI cmd ef/10:01:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 24.856661] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 24.856661] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 24.857300] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 24.857520] ata5.00: ACPI cmd ef/10:05:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 24.857520] ata5.00: ATAPI: HL-DT-ST DVDRAM GSA-T50L, SC04, max UDMA/100
[ 24.862889] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 24.862889] ata5.00: ACPI cmd ef/10:01:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 24.863745] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 24.863745] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 24.863750] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 24.864598] ata5.00: ACPI cmd ef/10:05:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 24.864598] ata5.00: configured for UDMA/100
[ 25.199089] ata6: SATA link down (SStatus 0 SControl 300)
[ 25.215208] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2320B 8909 PQ: 0 ANSI: 5
[ 25.218441] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T50L SC04 PQ: 0 ANSI: 5
[ 25.237051] Driver 'sd' needs updating - please use bus_type methods
[ 25.237148] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 25.237168] sd 0:0:0:0: [sda] Write Protect is off
[ 25.237171] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 25.237205] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 25.237265] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 25.237283] sd 0:0:0:0: [sda] Write Protect is off
[ 25.237286] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 25.237321] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 25.237326] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 25.314172] sda1 sda2 sda3
[ 25.331503] sd 0:0:0:0: [sda] Attached SCSI disk
[ 25.554333] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 25.554333] Uniform CD-ROM driver Revision: 3.20
[ 25.554333] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 25.562648] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 25.562648] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 26.511299] PM: Starting manual resume from disk
[ 26.575961] kjournald starting. Commit interval 5 seconds
[ 26.575961] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.826160] udevd version 125 started
[ 28.443064] Linux agpgart interface v0.103
[ 28.523482] input: Power Button (FF) as /class/input/input1
[ 28.573392] ACPI: Power Button (FF) [PWRF]
[ 28.573499] input: Power Button (CM) as /class/input/input2
[ 28.621362] ACPI: Power Button (CM) [PWRB]
[ 28.621430] input: Lid Switch as /class/input/input3
[ 28.645464] ACPI: Lid Switch [LID0]
[ 28.645536] input: Sleep Button (CM) as /class/input/input4
[ 28.710017] ACPI: Sleep Button (CM) [SLPB]
[ 28.762756] ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 22 (level, low) -> IRQ 22
[ 28.762756] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 28.842882] ACPI: AC Adapter [AC] (on-line)
[ 29.075488] ACPI: Battery Slot [BAT0] (battery present)
[ 29.075488] ACPI: WMI: Mapper loaded
[ 29.107462] ACPI: device:04 is registered as cooling_device3
[ 29.107462] input: Video Bus as /class/input/input5
[ 29.179564] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 29.203505] ACPI: device:09 is registered as cooling_device4
[ 29.203505] input: Video Bus as /class/input/input6
[ 29.271554] ACPI: Video Device [EVGA] (multi-head: yes rom: no post: no)
[ 29.371561] Linux video capture interface: v2.00
[ 29.423684] uvcvideo: Found UVC 1.00 device HP Webcam (090c:c371)
[ 29.427901] input: HP Webcam as /class/input/input7
[ 29.455764] usbcore: registered new interface driver uvcvideo
[ 29.455768] USB Video Class driver (v0.1.0)
[ 29.496136] input: PC Speaker as /class/input/input8
[ 29.808548] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[ 29.900548] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
[ 29.902926] ACPI: PCI Interrupt 0000:06:00.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 29.902926] PCI: Setting latency timer of device 0000:06:00.3 to 64
[ 30.686111] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04751/0xa00000
[ 30.816452] input: SynPS/2 Synaptics TouchPad as /class/input/input9
[ 31.333165] Adding 8024k swap on /dev/sda2. Priority:-1 extents:1 across:8024k
[ 31.850455] EXT3 FS on sda1, internal journal
[ 29.371561] Linux video capture interface: v2.00
[ 29.423684] uvcvideo: Found UVC 1.00 device HP Webcam (090c:c371)
[ 29.427901] input: HP Webcam as /class/input/input7
[ 29.455764] usbcore: registered new interface driver uvcvideo
[ 29.455768] USB Video Class driver (v0.1.0)
[ 29.496136] input: PC Speaker as /class/input/input8
[ 29.808548] hda_intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000
[ 29.900548] ACPI: PCI Interrupt 0000:00:1f.3[C] -> GSI 18 (level, low) -> IRQ 18
[ 29.902926] ACPI: PCI Interrupt 0000:06:00.3[A] -> GSI 16 (level, low) -> IRQ 16
[ 29.902926] PCI: Setting latency timer of device 0000:06:00.3 to 64
[ 30.686111] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04751/0xa00000
[ 30.816452] input: SynPS/2 Synaptics TouchPad as /class/input/input9
[ 31.333165] Adding 8024k swap on /dev/sda2. Priority:-1 extents:1 across:8024k
[ 31.850455] EXT3 FS on sda1, internal journal
[ 32.010929] loop: module loaded
[ 32.768871] kjournald starting. Commit interval 5 seconds
[ 32.769308] EXT3 FS on sda3, internal journal
[ 32.769308] EXT3-fs: mounted filesystem with ordered data mode.
[ 33.894420] r8169: eth0: link up
[ 33.894420] r8169: eth0: link up
[ 35.647753] NET: Registered protocol family 10
[ 35.648032] lo: Disabled Privacy Extensions
[ 35.932548] lp: driver loaded but no devices found
[ 36.003830] ppdev: user-space parallel port driver
[ 39.300778] Bluetooth: Core ver 2.11
[ 39.300778] NET: Registered protocol family 31
[ 39.300778] Bluetooth: HCI device and connection manager initialized
[ 39.300785] Bluetooth: HCI socket layer initialized
[ 39.376779] Bluetooth: L2CAP ver 2.9
[ 39.376779] Bluetooth: L2CAP socket layer initialized
[ 39.526784] Bluetooth: RFCOMM socket layer initialized
[ 39.526784] Bluetooth: RFCOMM TTY layer initialized
[ 39.526784] Bluetooth: RFCOMM ver 1.8
[ 55.174374] eth0: no IPv6 routers present
[ 61.848305] CPU0 attaching NULL sched-domain.
[ 61.848313] CPU1 attaching NULL sched-domain.
[ 61.852348] CPU0 attaching sched-domain:
[ 61.852360] domain 0: span 0-1
[ 61.852365] groups: 0 1
[ 61.852375] CPU1 attaching sched-domain:
[ 61.852380] domain 0: span 0-1
[ 61.852384] groups: 1 0
[ 80.119676] CE: hpet increasing min_delta_ns to 15000 nsec
[ 80.311916] CE: hpet increasing min_delta_ns to 22500 nsec
[ 564.244749] r8169: eth0: link up
[ 580.694189] eth0: no IPv6 routers present
[ 647.952391] r8169: eth0: link up
[ 663.350967] eth0: no IPv6 routers present
[ 853.924176] r8169: eth0: link up
[ 870.392402] eth0: no IPv6 routers present
Voila…
