résolusion récalcitrante / PPC

Support Debian
#1

Salut,
J’ai un souci avec ma résolution écran.
Donc j’ai un écran acer AL1917 qui peut afficher une résolution de 1280x1024 en 75 ( c’est dans la doc de l’écran ). Déjà dans mes choix possibles de la résolution d’écran, dans les paramètres système, il n’y a pas ce choix. Donc je l’ai ajouté à xrandr, sauf que, à chaque reconnexion de session, il me met un message genre http://wiki.vanessalionel.fr/images/stories/ubuntu/ubuntu030.png. Comment pourrais je avoir cette résolution définitivement et sans message d’erreur ?

root@MacDebian:/home/gilles# lspci | grep VGA 0000:00:10.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI R250 If [Radeon 9000] (rev 01)

( Quand j’active la résolution 1280 x 1024, tous s’affiche correctement )

#2

Tu peux essayer de générer un modeline

puis inclure le résultat dans ton xorg.conf

voir

doc.ubuntu-fr.org/configurer_son_ecran_old

paragraphe 4

#3

moi ce que j’ai fais c’est ca :

xrandr --newmode $(gtf 1280 1024 75 | sed -ne 's/"//g;s/ Modeline //p') xrandr --addmode DVI-0 1280x1024_75.00

et c’est ca qui pose problème …

je vais voir pour l’intégrer a xorg

#4

je met le xorg.conf générer. il me semble un peu étrange …

[code]Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 “Screen0” 0 0
Screen 1 “Screen1” RightOf "Screen0"
InputDevice “Mouse0” "CorePointer"
InputDevice “Keyboard0” "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection

Section "Module"
Load "extmod"
Load "record"
Load "dri"
Load "dbe"
Load "dri2"
Load "glx"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option “Protocol” "auto"
Option “Device” "/dev/input/mice"
Option “ZAxisMapping” "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section “Device”
### Available Driver options are:-
### Values: : integer, : float, : “True”/“False”,
### : “String”, : " Hz/kHz/MHz",
### : “%”
### [arg]: arg optional
#Option “NoAccel” # []
#Option “SWcursor” # []
#Option “Dac6Bit” # []
#Option “Dac8Bit” # []
#Option “BusType” # []
#Option “CPPIOMode” # []
#Option “CPusecTimeout” #
#Option “AGPMode” #
#Option “AGPFastWrite” # []
#Option “AGPSize” #
#Option “GARTSize” #
#Option “RingSize” #
#Option “BufferSize” #
#Option “EnableDepthMoves” # []
#Option “EnablePageFlip” # []
#Option “NoBackBuffer” # []
#Option “DMAForXv” # []
#Option “FBTexPercent” #
#Option “DepthBits” #
#Option “PCIAPERSize” #
#Option “AccelDFS” # []
#Option “IgnoreEDID” # []
#Option “CustomEDID” # []
#Option “DisplayPriority” # []
#Option “PanelSize” # []
#Option “ForceMinDotClock” #
#Option “ColorTiling” # []
#Option “VideoKey” #
#Option “RageTheatreCrystal” #
#Option “RageTheatreTunerPort” #
#Option “RageTheatreCompositePort” #
#Option “RageTheatreSVideoPort” #
#Option “TunerType” #
#Option “RageTheatreMicrocPath” #
#Option “RageTheatreMicrocType” #
#Option “ScalerWidth” #
#Option “RenderAccel” # []
#Option “SubPixelOrder” # []
#Option “ClockGating” # []
#Option “VGAAccess” # []
#Option “ReverseDDC” # []
#Option “LVDSProbePLL” # []
#Option “AccelMethod” #
#Option “DRI” # []
#Option “ConnectorTable” #
#Option “DefaultConnectorTable” # []
#Option “DefaultTMDSPLL” # []
#Option “MacModel” #
#Option “TVDACLoadDetect” # []
#Option “ForceTVOut” # []
#Option “TVStandard” #
#Option “IgnoreLidStatus” # []
#Option “DefaultTVDACAdj” # []
#Option “Int10” # []
#Option “EXAVSync” # []
#Option “ATOMTVOut” # []
#Option “R4xxATOM” # []
#Option “ForceLowPowerMode” # []
#Option “DynamicPM” # []
#Option “NewPLL” # []
#Option “ZaphodHeads” #
Identifier "Card0"
Driver "radeon"
BusID "PCI:0:16:0"
EndSection

Section “Device”
### Available Driver options are:-
### Values: : integer, : float, : “True”/“False”,
### : “String”, : " Hz/kHz/MHz",
### : “%”
### [arg]: arg optional
#Option “ShadowFB” # []
#Option “Rotate” #
#Option “fbdev” #
#Option “debug” # []
Identifier "Card1"
Driver "fbdev"
BusID "PCI:0:16:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection[/code]

je n’ai qu’un moniteur de branché