SERVEUR MAIL : Trouver un tutoriel récent ou de l'aide

Support Debian
#1

Bien le bonjour chère communauté linuxienne.

Je viens vers vous aujourd’hui car après mainte tentative d’installation de postfix et de ses accotés je n’ai malheureusement pas trouvé mon bonheur.
La cause ? Les sujets, tutos, etc… Sont bien souvent obsolètes et de ce fait, je me retrouve à en essayer d’autres en commettant des erreurs du aux tentatives d’installation précédentes.

Donc ma question est; savez vous ou puis-je trouver le “saint Graal” et enfin pouvoir installer proprement mon serveur mail ?
Je précise que je dispose d’un serveur dédié et donc d’une IP fixe ainsi que d’un nom de domaine que je gère depuis mon registar, pas de bind9 d’installé.

Merci d’avance.

Mes infos :

[code]uname -a :
Linux intoxzone.fr 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64 GNU/Linux

lspci :
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/Ivy Bridge DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v2/Ivy Bridge Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:16.3 Serial controller: Intel Corporation 7 Series/C210 Series Chipset Family KT Controller (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a4)
00:1f.0 ISA bridge: Intel Corporation Q77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)

lsusb :
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub

dmidecode :
SMBIOS 2.7 present.
81 structures occupying 3275 bytes.
Table at 0x000EC420.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Intel Corp.
Version: MKQ7710H.86A.0058.2013.0226.1541
Release Date: 02/26/2013
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 12288 kB
Characteristics:
PCI is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Targeted content distribution is supported
UEFI is supported
BIOS Revision: 4.6

Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: Digicube sas
Product Name: DediCube
Version: 2.1
Serial Number: 5876sf175dq
UUID: 4126CB4B-E2C1-E111-8915-505054503030
Wake-up Type: Power Switch
SKU Number: To be filled by O.E.M.
Family: server

Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: Intel Corporation
Product Name: DQ77MK
Version: AAG39642-400
Serial Number: BTMK22600X7U
Asset Tag: To be filled by O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To be filled by O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0

Handle 0x0003, DMI type 3, 22 bytes
Chassis Information
Manufacturer:
Type: Desktop
Lock: Not Present
Version:
Serial Number:
Asset Tag:
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
SKU Number: To be filled by O.E.M.

Handle 0x0004, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS2Mouse
External Connector Type: PS/2
Port Type: Mouse Port

Handle 0x0005, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port

Handle 0x0006, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A1
Internal Connector Type: None
External Reference Designator: TV Out
External Connector Type: Mini Centronics Type-14
Port Type: Other

Handle 0x0007, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2A
Internal Connector Type: None
External Reference Designator: COM A
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible

Handle 0x0008, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2B
Internal Connector Type: None
External Reference Designator: Video
External Connector Type: DB-15 female
Port Type: Video Port

Handle 0x0009, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Access Bus (USB)
Port Type: USB

Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Access Bus (USB)
Port Type: USB

Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3A1
Internal Connector Type: None
External Reference Designator: USB3
External Connector Type: Access Bus (USB)
Port Type: USB

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9A1 - TPM HDR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9C1 - PCIE DOCKING CONN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2B3 - CPU FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6C2 - EXT HDMI
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J3C1 - GMCH FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1D1 - ITP
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E2 - MDC INTPSR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E4 - MDC INTPSR
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E3 - LPC HOT DOCKING
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9E1 - SCAN MATRIX
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9G1 - LPC SIDE BAND
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8F1 - UNIFIED
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6F1 - LVDS
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2F1 - LAI FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2G1 - GFX VID
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1G6 - AC JACK
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x001C, DMI type 9, 17 bytes
System Slot Information
Designation: PCIe_X16
Type: x16 PCI Express 2 x16
Current Usage: Available
Length: Long
ID: 0
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:01.0

Handle 0x001D, DMI type 9, 17 bytes
System Slot Information
Designation: PCIe_X1
Type: x1 PCI Express 2 x1
Current Usage: Available
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:1c.4

Handle 0x001E, DMI type 9, 17 bytes
System Slot Information
Designation: PCI_Slot
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:1e.0

Handle 0x001F, DMI type 10, 12 bytes
On Board Device 1 Information
Type: Video
Status: Enabled
Description: Intel® HD Graphics Device
On Board Device 2 Information
Type: Ethernet
Status: Enabled
Description: Intel® 82579LM Gigabit Ethernet Device
On Board Device 3 Information
Type: Sound
Status: Disabled
Description: Intel® High Definition Audio Device
On Board Device 4 Information
Type: Ethernet
Status: Disabled
Description: Intel® 82574L Gigabit Ethernet Device

Handle 0x0020, DMI type 11, 5 bytes
OEM Strings
String 1: To Be Filled By O.E.M.

Handle 0x0021, DMI type 12, 5 bytes
System Configuration Options
Option 1: To Be Filled By O.E.M.

Handle 0x0022, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected

Handle 0x0023, DMI type 34, 11 bytes
Management Device
Description: LM78-1
Type: LM78
Address: 0x00000000
Address Type: I/O Port

Handle 0x0024, DMI type 26, 22 bytes
Voltage Probe
Description: LM78A
Location:
Status:
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown

Handle 0x0025, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6

Handle 0x0026, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x0023
Component Handle: 0x0023
Threshold Handle: 0x0024

Handle 0x0027, DMI type 28, 22 bytes
Temperature Probe
Description: LM78A
Location:
Status:
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown

Handle 0x0028, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6

Handle 0x0029, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x0023
Component Handle: 0x0026
Threshold Handle: 0x0027

Handle 0x002A, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x0027
Type:
Status:
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Cooling Dev 1

Handle 0x002B, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6

Handle 0x002C, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x0023
Component Handle: 0x0029
Threshold Handle: 0x002A

Handle 0x002D, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x0027
Type:
Status:
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Not Specified

Handle 0x002E, DMI type 36, 16 bytes
Management Device Threshold Data
Lower Non-critical Threshold: 1
Upper Non-critical Threshold: 2
Lower Critical Threshold: 3
Upper Critical Threshold: 4
Lower Non-recoverable Threshold: 5
Upper Non-recoverable Threshold: 6

Handle 0x002F, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x0023
Component Handle: 0x002C
Threshold Handle: 0x002D

Handle 0x0030, DMI type 29, 22 bytes
Electrical Current Probe
Description: ABC
Location:
Status:
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown

Handle 0x0031, DMI type 36, 16 bytes
Management Device Threshold Data

Handle 0x0032, DMI type 35, 11 bytes
Management Device Component
Description: To Be Filled By O.E.M.
Management Device Handle: 0x0023
Component Handle: 0x002F
Threshold Handle: 0x002D

Handle 0x0033, DMI type 26, 22 bytes
Voltage Probe
Description: LM78A
Location: Power Unit
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown

Handle 0x0034, DMI type 28, 22 bytes
Temperature Probe
Description: LM78A
Location: Power Unit
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown

Handle 0x0035, DMI type 27, 15 bytes
Cooling Device
Temperature Probe Handle: 0x0034
Type: Power Supply Fan
Status: OK
Cooling Unit Group: 1
OEM-specific Information: 0x00000000
Nominal Speed: Unknown Or Non-rotating
Description: Cooling Dev 1

Handle 0x0036, DMI type 29, 22 bytes
Electrical Current Probe
Description: ABC
Location: Power Unit
Status: OK
Maximum Value: Unknown
Minimum Value: Unknown
Resolution: Unknown
Tolerance: Unknown
Accuracy: Unknown
OEM-specific Information: 0x00000000
Nominal Value: Unknown

Handle 0x0037, DMI type 39, 22 bytes
System Power Supply
Power Unit Group: 1
Location: To Be Filled By O.E.M.
Name: To Be Filled By O.E.M.
Manufacturer: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Model Part Number: To Be Filled By O.E.M.
Revision: To Be Filled By O.E.M.
Max Power Capacity: Unknown
Status: Present, OK
Type: Switching
Input Voltage Range Switching: Auto-switch
Plugged: Yes
Hot Replaceable: No
Input Voltage Probe Handle: 0x0033
Cooling Device Handle: 0x0035
Input Current Probe Handle: 0x0036

Handle 0x0038, DMI type 41, 11 bytes
Onboard Device
Reference Designation: CPU
Type: Video
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:02.0

Handle 0x0039, DMI type 41, 11 bytes
Onboard Device
Reference Designation: L1U1
Type: Ethernet
Status: Enabled
Type Instance: 1
Bus Address: 0000:00:19.0

Handle 0x003A, DMI type 41, 11 bytes
Onboard Device
Reference Designation: AU1
Type: Sound
Status: Disabled
Type Instance: 1
Bus Address: 0000:00:1b.0

Handle 0x003B, DMI type 41, 11 bytes
Onboard Device
Reference Designation: L2U1
Type: Ethernet
Status: Disabled
Type Instance: 1
Bus Address: 0000:ff:00.0

Handle 0x003C, DMI type 7, 19 bytes
Cache Information
Socket Designation: CPU Internal L2
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Through
Location: Internal
Installed Size: 1024 kB
Maximum Size: 1024 kB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Multi-bit ECC
System Type: Unified
Associativity: 8-way Set-associative

Handle 0x003D, DMI type 7, 19 bytes
Cache Information
Socket Designation: CPU Internal L1
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Through
Location: Internal
Installed Size: 256 kB
Maximum Size: 256 kB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Parity
System Type: Data
Associativity: 8-way Set-associative

Handle 0x003E, DMI type 7, 19 bytes
Cache Information
Socket Designation: CPU Internal L3
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 8192 kB
Maximum Size: 8192 kB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Multi-bit ECC
System Type: Unified
Associativity: 16-way Set-associative

Handle 0x003F, DMI type 16, 23 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 32 GB
Error Information Handle: Not Provided
Number Of Devices: 4

Handle 0x0040, DMI type 4, 42 bytes
Processor Information
Socket Designation: CPU 1
Type: Central Processor
Family: Xeon
Manufacturer: Intel® Corporation
ID: A9 06 03 00 FF FB EB BF
Signature: Type 0, Family 6, Model 58, Stepping 9
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel® Xeon® CPU E3-1265L V2 @ 2.50GHz
Voltage: 5.0 V 3.3 V
External Clock: 100 MHz
Max Speed: 3800 MHz
Current Speed: 2500 MHz
Status: Populated, Enabled
Upgrade: Socket BGA1155
L1 Cache Handle: 0x003D
L2 Cache Handle: 0x003C
L3 Cache Handle: 0x003E
Serial Number: Not Specified
Asset Tag: Fill By OEM
Part Number: Fill By OEM
Core Count: 4
Core Enabled: 4
Thread Count: 8
Characteristics:
64-bit capable

Handle 0x0041, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x003F
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: DIMM3
Bank Locator: CHANNEL A SLOT0
Type: DDR3
Type Detail: Synchronous
Speed: 1333 MHz
Manufacturer: Transcend
Serial Number: 000946AB
Asset Tag: 9876543210
Part Number: JM1333KLN-4G
Rank: 2
Configured Clock Speed: 1333 MHz

Handle 0x0042, DMI type 20, 35 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000FFFFFFFF
Range Size: 4 GB
Physical Device Handle: 0x0041
Memory Array Mapped Address Handle: 0x0049
Partition Row Position: Unknown
Interleave Position: 1
Interleaved Data Depth: 2

Handle 0x0043, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x003F
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: DIMM1
Bank Locator: CHANNEL A SLOT1
Type: DDR3
Type Detail: Synchronous
Speed: 1333 MHz
Manufacturer: Transcend
Serial Number: 00095B0E
Asset Tag: 9876543210
Part Number: JM1333KLN-4G
Rank: 2
Configured Clock Speed: 1333 MHz

Handle 0x0044, DMI type 20, 35 bytes
Memory Device Mapped Address
Starting Address: 0x00200000000
Ending Address: 0x002FFFFFFFF
Range Size: 4 GB
Physical Device Handle: 0x0043
Memory Array Mapped Address Handle: 0x0049
Partition Row Position: Unknown
Interleave Position: 1
Interleaved Data Depth: 2

Handle 0x0045, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x003F
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: DIMM4
Bank Locator: CHANNEL B SLOT0
Type: DDR3
Type Detail: Synchronous
Speed: 1333 MHz
Manufacturer: Transcend
Serial Number: 00095010
Asset Tag: 9876543210
Part Number: JM1333KLN-4G
Rank: 2
Configured Clock Speed: 1333 MHz

Handle 0x0046, DMI type 20, 35 bytes
Memory Device Mapped Address
Starting Address: 0x00100000000
Ending Address: 0x001FFFFFFFF
Range Size: 4 GB
Physical Device Handle: 0x0045
Memory Array Mapped Address Handle: 0x0049
Partition Row Position: Unknown
Interleave Position: 2
Interleaved Data Depth: 2

Handle 0x0047, DMI type 17, 34 bytes
Memory Device
Array Handle: 0x003F
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 4096 MB
Form Factor: DIMM
Set: None
Locator: DIMM2
Bank Locator: CHANNEL B SLOT1
Type: DDR3
Type Detail: Synchronous
Speed: 1333 MHz
Manufacturer: Transcend
Serial Number: 000946AB
Asset Tag: 9876543210
Part Number: JM1333KLN-4G
Rank: 2
Configured Clock Speed: 1333 MHz

Handle 0x0048, DMI type 20, 35 bytes
Memory Device Mapped Address
Starting Address: 0x00300000000
Ending Address: 0x003FFFFFFFF
Range Size: 4 GB
Physical Device Handle: 0x0047
Memory Array Mapped Address Handle: 0x0049
Partition Row Position: Unknown
Interleave Position: 2
Interleaved Data Depth: 2

Handle 0x0049, DMI type 19, 31 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x003FFFFFFFF
Range Size: 16 GB
Physical Array Handle: 0x003F
Partition Width: 4

Handle 0x005E, DMI type 129, 8 bytes
OEM-specific Type
Header and Data:
81 08 5E 00 01 01 02 01
Strings:
Intel_ASF
Intel_ASF_001

Handle 0x005F, DMI type 130, 20 bytes
OEM-specific Type
Header and Data:
82 14 5F 00 24 41 4D 54 01 01 01 01 01 A5 2F 02
01 00 01 00

Handle 0x0060, DMI type 131, 64 bytes
OEM-specific Type
Header and Data:
83 40 60 00 35 00 00 00 08 00 00 00 00 00 42 00
F8 00 47 1E FF FF FF FF 09 E0 00 00 01 00 08 00
38 05 14 00 00 00 00 00 C8 00 02 15 00 00 00 00
00 00 00 00 66 00 00 00 76 50 72 6F 00 00 00 00

Handle 0x0061, DMI type 9, 17 bytes
System Slot Information
Designation: PCIe_X4
Type: x4 PCI Express 2 x4
Current Usage: Available
Length: Short
ID: 0
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:1c.0

Handle 0x0062, DMI type 9, 17 bytes
System Slot Information
Designation: MiniPCIe
Type: x1 PCI Express 2 x1
Current Usage: Available
Length: Short
ID: 0
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Bus Address: 0000:00:1c.7

Handle 0x0063, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1

Handle 0x0069, DMI type 127, 4 bytes
End Of Table[/code]

#2

J’ai monté mon serveur mail en suivant essentiellement cet article :
isalo.org/wiki.debian-fr/Co … ec_Postfix

#3

Merci pour cette réponse rapide !
Je test cela et je te dis ce qu’il en est.

Pour info, tu l’as installé il y a longtemps ? (Le tuto date d’il y à peu ?)

#4

J’ai aussi suivi ce tutoriel pour mon serveur, et en a repris les grandes lignes pour ce tuto : yeuxdelibad.net/Logiciel-libre/I … .html#mail

L’utilisation d’un script qui te permettra d’installer le serveur mail facilement pourrait éventuellement t’intéresser : yeuxdelibad.net/Programmation/Hostathome.html

Ça fonctionne très bien sous wheezy, l’actuelle debian stable.

Je n’ai pas encore testé pour jessie, mais ça reste déconseillé pour un serveur d’utiliser testing.

#5

Salut,

Ici, de l’or en barre. :wink:

[quote]vendredi 2 mai 2014, par tonio

Cet article, initié en 2007, est mis à jour régulièrement.
Le système sur lequel est basé ce document est une DEBIAN stable (Wheezy).
Le tuto est aussi entièrement compatible avec la version Testing (Jessie).

Ce tuto fonctionne également sous Ubuntu mais certains paquets présentent de légères différences. On essaiera de les indiquer si possible.

Mise à jour du 26/11/2014[/quote]

#6

Merci à vous, je pense me tourner vers le script. Étant plutôt attiré par la facilitée lorsqu’il s’agit de monter un serveur mail pour seulement quatre personnes (Administrateur de mon asso) voir peut être plus par la suite.

En ce qui concerne le script, étant donné que j’ai déjà bidouillé avec le 1er tutoriel proposé, cela ne posera t’il pas de problèmes ?

#7

Ça dépend de tes bidouilles.
N’oublie pas que le script simplifie la procédure, mais ne dois pas t’empêcher de te documenter suffisamment pour savoir ce qu’il se passe. :slightly_smiling:

#8

Je suis en train de suivre le tutoriel que m’a donné BelZéButh http://www.starbridge.org/spip/spip.php?article12

Pour le moment quelque erreurs mais rapidement corrigé (Certificat, soucis de fichiers hosts, etc… rien de bien méchant) par contre petite question.
A un moment dans le tutoriel il stipule cela :

On indique le password de la table postfix : sed -i 's/\*\*\*\*\*/toto/g' dovecot-sql.conf dovecot-dict-quota-sql.conf

Dois-je remplacer “toto” par mon mot de passe postfix de MySQL ?

#9

que donne la commande (en root) postconf -n et dovecot -n ?

#10

Yop,

postconf -n:

root@intoxzone:/etc/dovecot# postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix home_mailbox = Maildir/ message_size_limit = 50240000 mydestination = $myhostname, localhost.$mydomain, localhost myhostname = intoxzone.fr mynetworks = 127.0.0.0/8 myorigin = $mydomain notify_classes = 2bounce, bounce, delay, policy, protocol, resource, software proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $smtpd_recipient_restrictions $smtpd_sender_login_maps $has_our_domain_as_sender recipient_delimiter = + relay_domains = proxy:mysql:/etc/postfix/mysql_relay_domains_maps.cf relay_recipient_maps = proxy:mysql:/etc/postfix/mysql_relay_recipients_maps.cf smtp_tls_CAfile = /etc/postfix/tls/cacert.pem smtp_tls_security_level = may smtp_tls_session_cache_database = btree:${data_directory}/smtp_tls_session_cache smtpd_banner = $myhostname ESMTP $mail_name (Debian/GNU) smtpd_data_restrictions = reject_unauth_pipelining, permit smtpd_helo_required = yes smtpd_recipient_restrictions = permit_mynetworks, reject_unauth_destination, permit smtpd_tls_CAfile = /etc/postfix/tls/cacert.pem smtpd_tls_auth_only = yes smtpd_tls_cert_file = /etc/postfix/tls/starbridge-cert.pem smtpd_tls_key_file = /etc/postfix/tls/starbridge-key.pem smtpd_tls_loglevel = 1 smtpd_tls_protocols = !SSLv2,!SSLv3 smtpd_tls_received_header = yes smtpd_tls_security_level = may smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_tls_session_cache strict_rfc821_envelopes = yes tls_random_source = dev:/dev/urandom transport_maps = proxy:mysql:/etc/postfix/mysql_transport.cf,proxy:mysql:/etc/postfix/mysql_transport2.cf virtual_alias_maps = proxy:mysql:/etc/postfix/mysql_virtual_alias_maps.cf,proxy:mysql:/etc/postfix/mysql_virtual_alias_domain_maps.cf,proxy:mysql:/etc/postfix/mysql_virtual_alias_domain_catchall_maps.cf virtual_gid_maps = static:20001 virtual_mailbox_base = /home/virtual virtual_mailbox_domains = proxy:mysql:/etc/postfix/mysql_virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql_virtual_mailbox_maps.cf,proxy:mysql:/etc/postfix/mysql_virtual_alias_domain_mailbox_maps.cf virtual_minimum_uid = 20001 virtual_uid_maps = static:20001 root@intoxzone:/etc/dovecot#

dovecot -n

[code]root@intoxzone:/etc/dovecot# dovecot -n

2.2.15: /etc/dovecot/dovecot.conf

Pigeonhole version 0.4.6 (3e924b1b6c5c+)

OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.8

listen = *
mail_location = maildir:~/Maildir
managesieve_notify_capability = mailto
managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave duplicate
namespace inbox {
inbox = yes
location =
mailbox Drafts {
special_use = \Drafts
}
mailbox Junk {
special_use = \Junk
}
mailbox Sent {
special_use = \Sent
}
mailbox “Sent Messages” {
special_use = \Sent
}
mailbox Trash {
special_use = \Trash
}
prefix =
}
passdb {
driver = pam
}
protocols = imap
service auth {
unix_listener /var/spool/postfix/private/auth {
group = postfix
mode = 0660
user = postfix
}
}
ssl_cert = </etc/dovecot/dovecot.pem
ssl_key = </etc/dovecot/private/dovecot.pem
userdb {
driver = passwd
}
root@intoxzone:/etc/dovecot#
[/code]

#11

[quote=“vv222”]J’ai monté mon serveur mail en suivant essentiellement cet article :
isalo.org/wiki.debian-fr/Co … ec_Postfix[/quote]
Idem pour moi, et ça tourne depuis 3 ou 4 ans sans problème.
Salut de Dordogne Centre (Vallée de l’Isle), et toi (en MP, si tu veux)?

#12

[quote=“int0x”]
Idem pour moi, et ça tourne depuis 3 ou 4 ans sans problème.
Salut de Dordogne Centre (Vallée de l’Isle), et toi (en MP, si tu veux)?[/quote]Je dans le Périgord noir, dans la brousse ! Hautefort si ça te dis quelque chose ? 50km de Périgueux.

#13

[quote=“int0x”]Je suis en train de suivre le tutoriel que m’a donné BelZéButh http://www.starbridge.org/spip/spip.php?article12

Pour le moment quelque erreurs mais rapidement corrigé (Certificat, soucis de fichiers hosts, etc… rien de bien méchant) par contre petite question.
A un moment dans le tutoriel il stipule cela :

On indique le password de la table postfix : sed -i 's/\*\*\*\*\*/toto/g' dovecot-sql.conf dovecot-dict-quota-sql.conf

Dois-je remplacer “toto” par mon mot de passe postfix de MySQL ?[/quote]

Du coup quelqu’un a une idée ?

#14

Perso, je ne connais pas ce tuto, j’utilise celui de notre wiki, je ne pourrai donc pas t’aider.

Réponse au précédent message : Bien sûr que je connais Hautefort et surtout son très beau château-fort et particulièrement son jardin à la Française et son magnifique parc, dont les deux splendides cèdres du Liban, en facade.

#15

Salut,

Il te suffit d’appliquer/suivre le tuto à la lettre, ce que j’ai fait, il y a un peu plus de deux ans.

#16

[quote=“ricardo”]Perso, je ne connais pas ce tuto, j’utilise celui de notre wiki, je ne pourrai donc pas t’aider.

Réponse au précédent message : Bien sûr que je connais Hautefort et surtout son très beau château-fort et particulièrement son jardin à la Française et son magnifique parc, dont les deux splendides cèdres du Liban, en facade.[/quote]

Bah si à l’occasion tu passes dans le coin, fais moi signe, ce serait un honneur de rencontrer un administrateur de Debian-fr.org, et un adepte de la petite bête en question !

[quote=“BelZéButh”]Salut,

Il te suffit d’appliquer/suivre le tuto à la lettre, ce que j’ai fait, il y a un peu plus de deux ans.[/quote]

Ce que j’ai fais scrupuleusement ! :frowning:

Sinon, pour en revenir à mon souci avec postfix.
Lors de cette étape de test via Telnet en local :

---> telnet localhost 25 220 [127.0.0.1] ESMTP Postfix ---> HELO localhost 250 [127.0.0.1] ---> MAIL FROM: <> 250 2.1.0 Sender OK ---> RCPT TO: <user@starbridge.org> 250 2.1.5 OK ---> DATA 354 End data with <CR><LF>.<CR><LF> ---> . 250 2.0.0 Ok: queued as 079474CE44 ---> QUIT 221 2.0.0 Bye Connection closed by foreign host

J’obtiens :

root@intoxzone:~# telnet localhost 25 Trying ::1... Connected to localhost. Escape character is '^]'. 220 intoxzone.fr ESMTP Postfix (Debian/GNU) HELO localhost 250 intoxzone.fr MAIL FROM: <> 250 2.1.0 Ok RCPT TO: <user@starbridge.org> 451 4.3.0 <user@starbridge.org>: Temporary lookup failure DATA 554 5.5.1 Error: no valid recipients . 502 5.5.2 Error: command not recognized QUIT 221 2.0.0 Bye Connection closed by foreign host. root@intoxzone:~#

Pouvez-vous m’éclairer ?

#17

Bon bah je vais me rabattre sur le tuto de votre wiki. Je vous tiens au courant.
Encore merci :slightly_smiling:

#18

Bon bah j’ai finalement réussi à le faire en local… (histoire de ne pas refoutre le bordel sur la machine de prod)
Par contre, j’ai un soucis.

Je tente de désinstaller postfix de ma machine local et voila ce que la machine me retourne :

root@intoxzone:~# aptitude remove postfix Les paquets partiellement installés suivants seront configurés : dovecot-lmtpd Aucun paquet ne va être installé, mis à jour ou enlevé. 0 paquets mis à jour, 0 nouvellement installés, 0 à enlever et 0 non mis à jour. Il est nécessaire de télécharger 0 o/790 ko d'archives. Après dépaquetage, 0 o seront utilisés. dpkg: erreur de traitement de dovecot-imapd (--configure) : le paquet dovecot-imapd n'est pas prêt pour la configuration configuration impossible (état actuel « half-installed ») Paramétrage de dovecot-lmtpd (1:2.1.7-7+deb7u1) ... [....] Restarting IMAP/POP3 mail server: dovecotFatal: service(imap) access(/usr/lib/dovecot/imap) failed: No such file or directory failed! invoke-rc.d: initscript dovecot, action "restart" failed. dpkg: erreur de traitement de dovecot-lmtpd (--configure) : le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 dpkg: erreur de traitement de dovecot-pop3d (--configure) : le paquet dovecot-pop3d n'est pas prêt pour la configuration configuration impossible (état actuel « half-installed ») Des erreurs ont été rencontrées pendant l'exécution : dovecot-imapd dovecot-lmtpd dovecot-pop3d E: Sub-process /usr/bin/dpkg returned an error code (1) Échec de l'installation d'un paquet. Tentative de réparation : Paramétrage de dovecot-lmtpd (1:2.1.7-7+deb7u1) ... [....] Restarting IMAP/POP3 mail server: dovecotFatal: service(imap) access(/usr/lib/dovecot/imap) failed: No such file or directory failed! invoke-rc.d: initscript dovecot, action "restart" failed. dpkg: erreur de traitement de dovecot-lmtpd (--configure) : le sous-processus script post-installation installé a retourné une erreur de sortie d'état 1 Des erreurs ont été rencontrées pendant l'exécution : dovecot-lmtpd

Je suis perplexe…

#19

J’ai résolu mon affaire avec

Assez surprenant…

En tous cas, désormais tout fonctionne sur ma machine de prod !

Encore merci à vous :slightly_smiling:

#20

J’avoue être est très mauvais dépanneur dans cette matière, pour la bonne raison que je n’ai jamais eu à le faire depuis que c’est installé chez moi.
J’ai ptet de la chance mais je n’ai jamais rencontré de problème avec Postfix.
Je n’en dirais pas autant avec ??? préconisé par Debian.
Enfin, le principal, c’est que tu sois arrivé à tes fins.
:006