Serveur X

Support Debian
#1

Hello,
J’ai installé Debian sur un PowerPC (PowerBook G3 Fireware). Et maintenant, j’aimerais disposer d’une interface graphique. J’ai d’abord essayé d’installer Gnome (avec un aptitude install gnome), mais ce petit malin ne voulais pas fonctionner, j’ai alors essayé avec KDE. J’ai alors le même problème qu’avec Gnome, le serveur X ne veut pas démarrer :
Lorsque je fais : startx
J’obtiens,

code INVALID TO ALLOCATION b: 0xf00004ff correcting
(EE) end of block range 0xefffffff < begin 0xf0000000
(EE) unable to find a framebuffer device
(EE) R128(0) Failed to open framebuffer device, consult warnings and/or errors above for possible reasons
(you may have to look at the server log to see warnings)
(EE) Screen(s) found, but not have a usable configuration.

Fatal server errors:
no screen found

waiting for X server to begin accepting connections
giving up.
xinit: Connection reset by peer (errno 184): unable to connect to X server
xinit: No such process (errno 3): Server error.
[/code]

  • Quant à la carte graphique
    lspci -v M’indique :

0000:00:10.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev02) (prog-if 00[VGA controller]) Subsystem: ATI Technologies Inc Rage Mobility M3 AGP 2x Flags: bus master, stepping, 66MHz, medium devsel, latency 255, IRQ 48 Memory at b4000000 (32-bit, prefetchable) [size=64M] I/0 ports at 0400 [disabled] [size=256] Memory at b0000000 (32-bit, non prefetchable) [size=16K] Expansion ROM at f1000000 [disabled] [size=128K] Capabalities: [50] AGP version 2.0 Capabalities: [5c] Power Management version 2

  • Et le fichier /etc/x11/xorg.conf :

[code]Section "Device"
Identifier "Configured Video Device"
BusID "PCI:0:16:0"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection[/code]

Voilà j’espère que ces informations sont suffisantes pour que vous m’aidiez à résoudre mon problème. Je pense que je peux me classer dans les “newbie” quant à l’utilisation de debian, et encore plus quant à l’utilisation de la console.

Merci.

#2

fais un dpkg-reconfigure xserver-xorg en root.

#3

Et utilise le driver vesa pour commencer.
Lorsque ça marche, tu passes au driver “ati”, puis au “fglrx” si tu veux la 3D accélérée matériellement.

#4

Bonjour les gens,
J’ai réinstallé debian sur mon vieux coucou, et il y’a un léger progrès.
Le serveur X marche, un semblant d’interface graphique se lance mais abouti à un écran blanc avec des nuances d’un peu toutes les couleurs.
Alors je suppose que le problème est du à la configuration de la carte graphique.

J’ai modifié /etc/X11/xorg.conf

Section "Device" Identifier "ATI Technologies Inc Rage Mobility M3 AGP 2x" BusID "PCI:0:16:0" Driver "vesa" EndSection

Cette fois-ci l’écran blanc n’apparaît même pas, j’ai le droit à un joli

[code]_

[/code]
qui clignote sur fond noir.

Le dpkg-reconfigure xserver-xorg n’a rien changé.
:cry:

Vous avez une idée ?

#5

Peut ére un problème de résolution trop élevée pour l’écran.
Il faudrait aller voir le log de xorg pour comprendre l’erreur.
Pour ça tu ouvres un terminal (ctrl + alt + F1), et tu regardes dans /var/log/Xorg.0.log

Nota: j’aime bien installer mc pour naviguer dans les répertoires en mode console (apt-get install mc, puis ensuite en console tu le lances avec mc)

#6

Voici le fichier /var/log/Xorg.0.log
Peut-être y trouverez-vous la sources de mes soucis ?

[size=85][code]X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10.lenny1)
Current Operating System: Linux new-host 2.6.26-2-powerpc #1 Fri Mar 27 07:43:24 UTC 2009 ppc
Build Date: 15 March 2009 08:06:19PM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.

Module Loader present
Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Sat May 9 10:26:02 2009
(==) Using config file: “/etc/X11/xorg.conf”
(==) No Layout section. Using the first Screen section.
() |–>Screen “Default Screen” (0)
() | |–>Monitor “Configured Monitor”
(==) No device specified for screen “Default Screen”.
Using the first device section listed.
() | |–>Device “Configured Video Device”
(==) |–>Input Device “Configured Mouse”
(==) |–>Input Device “Generic Keyboard”
(==) The core pointer device wasn’t specified explicitly in the layout.
Using the first mouse device.
(==) The core keyboard device wasn’t specified explicitly in the layout.
Using the first keyboard device.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
Entry deleted from font path.
(WW) The directory “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType” does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi
(==) RgbPath set to “/etc/X11/rgb”
(==) ModulePath set to “/usr/lib/xorg/modules”
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x101e350c
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: “pcidata”
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:0b:0: chip 106b,0020 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:10:0: chip 1002,4c46 card 1002,4c46 rev 02 class 03,00,00 hdr 00
(II) PCI: 10:0b:0: chip 106b,001f card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 10:17:0: chip 106b,0022 card 0000,0000 rev 03 class ff,00,00 hdr 00
(II) PCI: 10:18:0: chip 106b,0019 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 10:19:0: chip 106b,0019 card 0000,0000 rev 00 class 0c,03,10 hdr 00
(II) PCI: 10:1a:0: chip 104c,ac1e card 1000,0000 rev 00 class 06,07,00 hdr 02
(II) PCI: 24:0b:0: chip 106b,001e card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 24:0e:0: chip 106b,0018 card 0000,0000 rev 01 class 0c,00,10 hdr 00
(II) PCI: 24:0f:0: chip 106b,0021 card 0000,0000 rev 01 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:11:0), (0,0,36), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 16: bridge is at (16:11:0), (16,16,36), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 16 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 16 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 16 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 17: bridge is at (16:26:0), (16,17,20), BCTRL: 0x05c0 (VGA_EN is cleared)
(II) Bus 17 non-prefetchable memory range:
[0] -1 0 0x88000000 - 0x8bffffff (0x4000000) MX[B]
(II) Bus 17 prefetchable memory range:
[0] -1 0 0x84000000 - 0x87ffffff (0x4000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus 36: bridge is at (36:11:0), (36,36,36), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 36 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 36 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 36 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(–) PCI:*(0:16:0) ATI Technologies Inc Rage Mobility M3 AGP 2x rev 2, Mem @ 0xb4000000/26, 0xb0000000/14, I/O @ 0x0400/8, BIOS @ 0xf1000000/17
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0x80000000 from 0xffffffff to 0x83ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[1] -1 0 0xf5000000 - 0xf5ffffff (0x1000000) MX[B]E
[2] -1 0 0xa0001000 - 0xa0001fff (0x1000) MX[B]E
[3] -1 0 0xa0002000 - 0xa0003fff (0x2000) MX[B]E
[4] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[B]E
[5] -1 0 0xf1000000 - 0xf101ffff (0x20000) MXB
[6] -1 0 0xb0000000 - 0xb0003fff (0x4000) MXB
[7] -1 0 0xb4000000 - 0xb7ffffff (0x4000000) MXB
[8] -1 0 0xf0000400 - 0xf00004ff (0x100) IXB
(II) PCI Memory resource overlap reduced 0xf5000000 from 0xf5ffffff to 0xf51fffff
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[1] -1 0 0xf5000000 - 0xf51fffff (0x200000) MX[B]E
[2] -1 0 0xa0001000 - 0xa0001fff (0x1000) MX[B]E
[3] -1 0 0xa0002000 - 0xa0003fff (0x2000) MX[B]E
[4] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[B]E
[5] -1 0 0xf1000000 - 0xf101ffff (0x20000) MXB
[6] -1 0 0xb0000000 - 0xb0003fff (0x4000) MXB
[7] -1 0 0xb4000000 - 0xb7ffffff (0x4000000) MXB
[8] -1 0 0xf0000400 - 0xf00004ff (0x100) IXB
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[5] -1 0 0xf5000000 - 0xf51fffff (0x200000) MX[B]E
[6] -1 0 0xa0001000 - 0xa0001fff (0x1000) MX[B]E
[7] -1 0 0xa0002000 - 0xa0003fff (0x2000) MX[B]E
[8] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[B]E
[9] -1 0 0xf1000000 - 0xf101ffff (0x20000) MXB
[10] -1 0 0xb0000000 - 0xb0003fff (0x4000) MXB
[11] -1 0 0xb4000000 - 0xb7ffffff (0x4000000) MXB
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0xf0000400 - 0xf00004ff (0x100) IXB
(II) LoadModule: “extmod”
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “dbe”
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: “glx”
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: “freetype”
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: “record”
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: “dri”
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) Matched r128 from file name r128.ids in autoconfig
(==) Matched r128 for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: “r128”
(II) Loading /usr/lib/xorg/modules/drivers//r128_drv.so
(II) Module r128: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 6.8.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: “mouse”
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: “kbd”
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor=“X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (PCI/AGP), ATI Rage 128 Pro GL PB (PCI/AGP),
ATI Rage 128 Pro GL PC (PCI/AGP), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (PCI/AGP), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (PCI/AGP), ATI Rage 128 Pro VR PH (PCI/AGP),
ATI Rage 128 Pro VR PI (PCI/AGP), ATI Rage 128 Pro VR PJ (PCI/AGP),
ATI Rage 128 Pro VR PK (PCI/AGP), ATI Rage 128 Pro VR PL (PCI/AGP),
ATI Rage 128 Pro VR PM (PCI/AGP), ATI Rage 128 Pro VR PN (PCI/AGP),
ATI Rage 128 Pro VR PO (PCI/AGP), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (PCI/AGP), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (PCI/AGP), ATI Rage 128 Pro VR PT (PCI/AGP),
ATI Rage 128 Pro VR PU (PCI/AGP), ATI Rage 128 Pro VR PV (PCI/AGP),
ATI Rage 128 Pro VR PW (PCI/AGP), ATI Rage 128 Pro VR PX (PCI/AGP),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (PCI/AGP),
ATI Rage 128 4X SF (PCI/AGP), ATI Rage 128 4X SG (PCI/AGP),
ATI Rage 128 4X SH (PCI/AGP), ATI Rage 128 4X SK (PCI/AGP),
ATI Rage 128 4X SL (PCI/AGP), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (PCI/AGP), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) Primary Device is: PCI 00:10:0
(–) Chipset ATI Rage 128 Mobility M3 LF (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[5] -1 0 0xf5000000 - 0xf51fffff (0x200000) MX[B]E
[6] -1 0 0xa0001000 - 0xa0001fff (0x1000) MX[B]E
[7] -1 0 0xa0002000 - 0xa0003fff (0x2000) MX[B]E
[8] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[B]E
[9] -1 0 0xf1000000 - 0xf101ffff (0x20000) MXB
[10] -1 0 0xb0000000 - 0xb0003fff (0x4000) MXB
[11] -1 0 0xb4000000 - 0xb7ffffff (0x4000000) MXB
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0xf0000400 - 0xf00004ff (0x100) IXB
(WW) INVALID IO ALLOCATION b: 0xf0000400 e: 0xf00004ff correctinga
(EE) end of block range 0xefffffff < begin 0xf0000000
(II) window:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resSize:
(II) window fixed:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[5] -1 0 0xf5000000 - 0xf51fffff (0x200000) MX[B]E
[6] -1 0 0xa0001000 - 0xa0001fff (0x1000) MX[B]E
[7] -1 0 0xa0002000 - 0xa0003fff (0x2000) MX[B]E
[8] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[B]E
[9] -1 0 0xf1000000 - 0xf101ffff (0x20000) MXB
[10] -1 0 0xb0000000 - 0xb0003fff (0x4000) MXB
[11] -1 0 0xb4000000 - 0xb7ffffff (0x4000000) MXB
[12] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[13] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[14] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[15] -1 0 0x00000400 - 0x000004ff (0x100) IXB
[16] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[17] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[18] 0 0 0xf00003b0 - 0xf00003bb (0xc) IS[B]
[19] 0 0 0xf00003c0 - 0xf00003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) R128(0): PCI bus 0 card 16 func 0
(II) R128(0): Creating default Display subsection in Screen section
"Default Screen” for depth/fbbpp 24/32
(==) R128(0): Depth 24, (–) framebuffer bpp 32
(II) R128(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) R128(0): Default visual is TrueColor
() R128(0): Option “UseFBDev” “true”
(II) R128(0): VGAAccess option set to FALSE, VGA module load skipped
(==) R128(0): RGB weight 888
(II) R128(0): Using 8 bits per RGB (8 bit DAC)
() R128(0): Using framebuffer device
(II) Loading sub module “fbdevhw”
(II) LoadModule: “fbdevhw”
(II) Loading /usr/lib/xorg/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.0.2
ABI class: X.Org Video Driver, version 2.0
(–) R128(0): Chipset: “ATI Rage 128 Mobility M3 LF (AGP)” (ChipID = 0x4c46)
(–) R128(0): Linear framebuffer at 0xb4000000
(–) R128(0): MMIO registers at 0xb0000000
(–) R128(0): BIOS at 0xf1000000
(II) R128(0): Option “Display” ignored (framebuffer device determines display type)
(–) R128(0): VideoRAM: 8192 kByte (128-bit SDR SGRAM 1:1)
(II) Attempted to read BIOS 64KB from /sys/bus/pci/devices/0000:00:10.0/rom: got 0KB
(WW) R128(0): Video BIOS not detected in PCI space!
(WW) R128(0): Attempting to read Video BIOS from legacy ISA space!
(WW) R128(0): Video BIOS not found!
(II) R128(0): Primary Display == Type 2
(WW) R128(0): Can’t determine panel dimensions, and none specified.
Disabling programming of FP registers.
(II) R128(0): PLL parameters: rf=2950 rd=59 min=12500 max=25000; xclk=10500
(II) Loading sub module “ddc”
(II) LoadModule: “ddc”(II) Module “ddc” already built-in
(==) R128(0): Using gamma correction (1.0, 1.0, 1.0)
(II) R128(0): Configured Monitor: Using default hsync range of 31.50-37.90 kHz
(II) R128(0): Configured Monitor: Using default vrefresh range of 50.00-70.00 Hz
(WW) R128(0): Unable to estimate virtual size
(II) R128(0): Clock range: 12.50 to 250.00 MHz
(II) R128(0): Not using default mode “640x350” (vrefresh out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “320x175” (unknown reason)
(II) R128(0): Not using default mode “640x400” (vrefresh out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “320x200” (unknown reason)
(II) R128(0): Not using default mode “720x400” (vrefresh out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “360x200” (unknown reason)
(II) R128(0): Not using default mode “640x480” (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “320x240” (unknown reason)
(II) R128(0): Not using default mode “640x480” (vrefresh out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “320x240” (unknown reason)
(II) R128(0): Not using default mode “640x480” (vrefresh out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “320x240” (unknown reason)
(II) R128(0): Not using default mode “640x480” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “320x240” (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “400x300” (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “400x300” (unknown reason)
(II) R128(0): Not using default mode “800x600” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “400x300” (unknown reason)
(II) R128(0): Not using default mode “800x600” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “400x300” (unknown reason)
(II) R128(0): Not using default mode “800x600” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “400x300” (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “1024x768” (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “512x384” (unknown reason)
(II) R128(0): Not using default mode “1024x768” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “512x384” (unknown reason)
(II) R128(0): Not using default mode “1024x768” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “512x384” (unknown reason)
(II) R128(0): Not using default mode “1024x768” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “512x384” (unknown reason)
(II) R128(0): Not using default mode “1024x768” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “512x384” (unknown reason)
(II) R128(0): Not using default mode “1152x864” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “576x432” (unknown reason)
(II) R128(0): Not using default mode “1280x960” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “640x480” (unknown reason)
(II) R128(0): Not using default mode “1280x960” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “640x480” (unknown reason)
(II) R128(0): Not using default mode “1280x1024” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “640x512” (unknown reason)
(II) R128(0): Not using default mode “1280x1024” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “640x512” (unknown reason)
(II) R128(0): Not using default mode “1280x1024” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “640x512” (unknown reason)
(II) R128(0): Not using default mode “1600x1200” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “800x600” (unknown reason)
(II) R128(0): Not using default mode “1600x1200” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “800x600” (unknown reason)
(II) R128(0): Not using default mode “1600x1200” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “800x600” (unknown reason)
(II) R128(0): Not using default mode “1600x1200” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “800x600” (unknown reason)
(II) R128(0): Not using default mode “1600x1200” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “800x600” (unknown reason)
(II) R128(0): Not using default mode “1792x1344” (insufficient memory for mode)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “896x672” (unknown reason)
(II) R128(0): Not using default mode “1792x1344” (insufficient memory for mode)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “896x672” (unknown reason)
(II) R128(0): Not using default mode “1856x1392” (insufficient memory for mode)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “928x696” (unknown reason)
(II) R128(0): Not using default mode “1856x1392” (insufficient memory for mode)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “928x696” (unknown reason)
(II) R128(0): Not using default mode “1920x1440” (insufficient memory for mode)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “960x720” (unknown reason)
(II) R128(0): Not using default mode “1920x1440” (insufficient memory for mode)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “960x720” (unknown reason)
(II) R128(0): Not using default mode “832x624” (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “416x312” (unknown reason)
(II) R128(0): Not using default mode “1280x768” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “640x384” (unknown reason)
(II) R128(0): Not using default mode “1280x800” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “640x400” (unknown reason)
(II) R128(0): Not using default mode “1152x768” (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “576x384” (unknown reason)
(II) R128(0): Not using default mode “1152x864” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “576x432” (unknown reason)
(II) R128(0): Not using default mode “1400x1050” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “700x525” (unknown reason)
(II) R128(0): Not using default mode “1400x1050” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “700x525” (unknown reason)
(II) R128(0): Not using default mode “1400x1050” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “700x525” (unknown reason)
(II) R128(0): Not using default mode “1400x1050” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “700x525” (unknown reason)
(II) R128(0): Not using default mode “1440x900” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “720x450” (unknown reason)
(II) R128(0): Not using default mode “1600x1024” (unknown reason)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “800x512” (unknown reason)
(II) R128(0): Not using default mode “1680x1050” (hsync out of range)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “840x525” (unknown reason)
(II) R128(0): Not using default mode “1920x1200” (insufficient memory for mode)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “960x600” (unknown reason)
(II) R128(0): Not using default mode “1920x1200” (insufficient memory for mode)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “960x600” (unknown reason)
(II) R128(0): Not using default mode “1920x1440” (insufficient memory for mode)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “960x720” (unknown reason)
(II) R128(0): Not using default mode “2048x1536” (insufficient memory for mode)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “1024x768” (unknown reason)
(II) R128(0): Not using default mode “2048x1536” (insufficient memory for mode)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “1024x768” (unknown reason)
(II) R128(0): Not using default mode “2048x1536” (insufficient memory for mode)
(EE) R128(0): FBIOPUT_VSCREENINFO: Invalid argument
(II) R128(0): Not using default mode “1024x768” (unknown reason)
(–) R128(0): Virtual size is 800x600 (pitch 800)
() R128(0): *Default mode “800x600”: 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) R128(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
() R128(0): *Default mode “800x600”: 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) R128(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(==) R128(0): DPI set to (96, 96)
(II) Loading sub module “fb”
(II) LoadModule: “fb”
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module “ramdac”
(II) LoadModule: “ramdac”(II) Module “ramdac” already built-in
(II) Loading sub module “xaa”
(II) LoadModule: “xaa”
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module “shadowfb”
(II) LoadModule: “shadowfb”
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) R128(0): Page flipping disabled
(!!) R128(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(–) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don’t.
(II) resource ranges after preInit:
[0] 0 0 0xb0000000 - 0xb0003fff (0x4000) MS[B]
[1] 0 0 0xb4000000 - 0xb7ffffff (0x4000000) MS[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xf5200000 - 0xf53fffff (0x200000) MX[B]E
[7] -1 0 0xf5000000 - 0xf51fffff (0x200000) MX[B]E
[8] -1 0 0xa0001000 - 0xa0001fff (0x1000) MX[B]E
[9] -1 0 0xa0002000 - 0xa0003fff (0x2000) MX[B]E
[10] -1 0 0x80000000 - 0x83ffffff (0x4000000) MX[B]E
[11] -1 0 0xf1000000 - 0xf101ffff (0x20000) MXB
[12] -1 0 0xb0000000 - 0xb0003fff (0x4000) MXB
[13] -1 0 0xb4000000 - 0xb7ffffff (0x4000000) MXB
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MSB
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MSB
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MSB
[17] 0 0 0xf0000400 - 0xf00004ff (0x100) IS[B]
[18] -1 0 0x00000400 - 0x000004ff (0x100) IXB
[19] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[20] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[21] 0 0 0xf00003b0 - 0xf00003bb (0xc) ISB
[22] 0 0 0xf00003c0 - 0xf00003df (0x20) ISB
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
(II) [drm] loaded kernel module for “r128” driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) R128(0): [drm] Using the DRM lock SAREA also for drawables.
(II) R128(0): [drm] framebuffer handle = 0xb4000000
(II) R128(0): [drm] added 1 reserved context for kernel
(II) R128(0): X context handle = 0x1
(II) R128(0): [drm] installed DRM signal handler
(II) R128(0): [agp] Mode 0x07000201 [AGP 0x106b/0x0020; Card 0x1002/0x4c46]
(II) R128(0): [agp] 8192 kB allocated with handle 0x00000001
(II) R128(0): [agp] ring handle = 0x00000000
(II) R128(0): [agp] Ring mapped at 0x48851000
(II) R128(0): [agp] ring read ptr handle = 0x00101000
(II) R128(0): [agp] Ring read ptr mapped at 0x48024000
(II) R128(0): [agp] vertex/indirect buffers handle = 0x00102000
(II) R128(0): [agp] Vertex/indirect buffers mapped at 0x48952000
(II) R128(0): [agp] AGP texture map handle = 0x00302000
(II) R128(0): [agp] AGP Texture map mapped at 0x48b52000
(II) R128(0): [drm] register handle = 0xb0000000
(II) R128(0): [dri] Visual configs initialized
(II) R128(0): CCE in BM mode
(II) R128(0): Using 8 MB AGP aperture
(II) R128(0): Using 1 MB for the ring buffer
(II) R128(0): Using 2 MB for vertex/indirect buffers
(II) R128(0): Using 5 MB for AGP textures
(II) R128(0): Memory manager initialized to (0,0) (800,2416)
(II) R128(0): Reserved area from (0,600) to (800,602)
(II) R128(0): Largest offscreen area available: 800 x 1814
(II) R128(0): Reserved back buffer from (0,602) to (800,1202)
(II) R128(0): Reserved depth buffer from (0,1202) to (800,1803)
(II) R128(0): Reserved depth span from (0,1802) offset 0x57fd00
(II) R128(0): Reserved 640 kb for textures at offset 0x75f800
(II) R128(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
24 128x128 slots
(II) R128(0): Acceleration enabled
(==) R128(0): Backing store disabled
(==) R128(0): Silken mouse enabled
(II) R128(0): Using hardware cursor (scanline 7212)
(II) R128(0): Largest offscreen area available: 800 x 610
(II) R128(0): DPMS enabled
(II) R128(0): [DRI] installation complete
(II) R128(0): [drm] Added 128 16384 byte vertex/indirect buffers
(II) R128(0): [drm] Mapped 128 vertex/indirect buffers
(II) R128(0): [drm] dma control initialized, using IRQ 48
(II) R128(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:10.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:10.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r128_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(WW) Configured Mouse: No Device specified, looking for one…
(II) Configured Mouse: Setting Device option to “/dev/input/mice”
(–) Configured Mouse: Device: “/dev/input/mice”
(==) Configured Mouse: Protocol: “Auto”
() Option “CorePointer”
() Configured Mouse: always reports core events
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
() Configured Mouse: ZAxisMapping: buttons 4 and 5
() Configured Mouse: Buttons: 9
() Configured Mouse: Sensitivity: 1
() Option “CoreKeyboard”
() Generic Keyboard: always reports core events
() Option “Protocol” “standard”
() Generic Keyboard: Protocol: standard
() Option “AutoRepeat” “500 30”
() Option “XkbRules” “xorg”
() Generic Keyboard: XkbRules: “xorg”
() Option “XkbModel” “pc105”
() Generic Keyboard: XkbModel: “pc105”
() Option “XkbLayout” “fr”
() Generic Keyboard: XkbLayout: “fr”
() Option “XkbVariant” “oss”
() Generic Keyboard: XkbVariant: “oss”
() Option “XkbOptions” “lv3:lwin_switch”
() Generic Keyboard: XkbOptions: “lv3:lwin_switch”
() Option “CustomKeycodes” “off”
() Generic Keyboard: CustomKeycodes disabled
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device “Configured Mouse” (type: MOUSE)
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device “Generic Keyboard” (type: KEYBOARD)
(–) Configured Mouse: PnP-detected protocol: “ExplorerPS/2”
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) AIGLX: Suspending AIGLX clients for VT switch[/code][/size]

#7

Une ATI rage 128 ? C’est pas tout jeune ça!

Ca ressemble effectivement à un problème de résolution ou de nombre de couleur.
Essai de trouver la résolution native de ton écran (specs techtiques de ton PC), et de l’indiquer dans le xorg.conf (tu trouveras des tas d’exemples via google), et définit un nombre de couleurs faibles.
et avec une rage 128, tu peux oublier les effets bureau 3D! (et les drivers proprios ATI qui me semble t ils ne supportent plus ces cartes). Les drivers ati de xorg fonctionnent bien sur cette carte.

#8

Le problème principal est résolu. J’ai essayé avec le pilote “fbdev” et ça marche. Maintenant, ça m’arrangerai de trouver un pilote qui me permette d’augmenter d’un chouilla le nombre de couleurs :mrgreen:. Parce qu’il tourne relativement vite, mais à côté de ça le nombre de couleurs est plutôt pitoyable (beaucoup moins que sous Mac OS, peut-être 256 couleurs…).

#9

bonjour
J’ai eu le même genre problème
pour ma part c’etait un problème de résolution essaye de rajouter ca dans la section screen avec ton driver vesa

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        DefaultDepth 24
        SubSection "Display"
                Viewport  0 0
                Depth     24
                Modes     "800x600"
        EndSubSection
EndSection

si ca fonctionne remplace la résolution en fonction de ton écran
Bye

#10

Bonjour,
J’ai ajouté la ligne DefaultDepth 24 à la section “Screen”, et les couleurs affichées sont désormais satisfaisantes. Le problème est donc résolu.

Merci à tous pour votre aide.