Salut!
Je suis l’heureux possesseur de cette mer^W carte graphique. Depuis un certain temps j’utilise un driver binaire trouvé je ne sais ou. Avec le passage a xserver-xorg 7.4 (dans sid), il y a une incompatibilité binaire.
Et depuis, j’ai 10 paquets on hold constamment. Premiere fois depuis des années. Merci SiS. Vraiment. Enfin, passons…
Hier j’ai vu que les sources étaient dispo depuis peu et que certains l’avaient corrigé/adapté au nouvelles interfaces. Je vais le compiler.
Quelqu’un a essayé? Toute experience est la bienvenue.
Ou meme des infos sur le developpeur, j’ai rien vu sur son site web.
Il y a xorg-driver-sis671 chez ubuntu (il faut se logger pour accèder au fichier):
ubuntuforums.org/showpost.php?p= … tcount=119
Le thread entier est assez interessant. SiS ne donne ses drivers que pour des configurations précises type OEM avec une distrib spéciale.
ubuntuforums.org/showthread.php?t=886463&page=9
Ca fait l’affaire pour mon Fujutsu Siemens Esprimo 5535 et ca permet d’utiliser les dernieres moutures de xorg.
Toujours PAS d’accéleration 3d hardware.
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.26-2-686 i686 Debian
Current Operating System: Linux PC 2.6.30.1-1 #1 SMP Mon Jul 6 21:38:41 CEST 2009 i686
Build Date: 13 July 2009 09:49:54PM
xorg-server 2:1.6.2-1 (bgoglin@debian.org)
Before reporting problems, check wiki.x.org
to make sure that you have the latest version.
Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Sun Jul 19 10:55:54 2009
(==) Using config file: “/etc/X11/xorg.conf”
(==) No Layout section. Using the first Screen section.
() |–>Screen “Default Screen” (0)
() | |–>Monitor “Configured Monitor”
(==) No device specified for screen “Default Screen”.
Using the first device section listed.
() | |–>Device “Configured Video Device”
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to “/usr/lib/xorg/modules”
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x3bc0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(–) PCI:*(0:1:0:0) 1039:6351:1734:1125 Silicon Integrated Systems [SiS] 771/671 PCIE VGA Display Adapter rev 16, Mem @ 0xc0000000/268435456, 0xd4000000/131072, I/O @ 0x00009000/128
(II) Open ACPI successful (/var/run/acpid.socket)
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: “extmod”
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “dbe”
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: “glx”
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: “record”
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: “dri”
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: “dri2”
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: “sis671”
(II) Loading /usr/lib/xorg/modules/drivers//sis671_drv.so
(II) Module sis671: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 0.8.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) SIS: driver for SiS chipsets: SIS5597/5598, SIS530/620,
SIS6326/AGP/DVD, SIS300/305, SIS630/730, SIS540, SIS315, SIS315H,
SIS315PRO/E, SIS550, SIS650/M650/651/740, SIS330(Xabre),
SIS[M]661[F|M]X/[M]741[GX]/[M]760[GX]/[M]761[GX]/662, SIS340,
[M]670/[M]770[GX], [M]671/[M]771[GX]
(II) SIS: driver for XGI chipsets: Volari Z7 (XG20),
Volari V3XT/V5/V8/Duo (XG40/XG42)
(II) Primary Device is: PCI 01@00:00:0
(WW) Falling back to old probe method for sis671
(–) Chipset [M]671/[M]771[GX] found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) SIS(0): SiS driver (2006/10/17-1, compiled for X.org 1.6.0.0)
(II) SIS(0): Copyright © 2001-2005 Thomas Winischhofer thomas@winischhofer.net and others
(II) SIS(0): *** See winischhofer.at/linuxsisvga.shtml
(II) SIS(0): *** for documentation, updates and a Premium Version.
(II) SIS(0): RandR rotation support not available in this version.
(II) SIS(0): Dynamic modelist support not available in this version.
(II) SIS(0): Screen growing support not available in this version.
(II) SIS(0): Advanced Xv video blitter not available in this version.
(II) SIS(0): Advanced MergedFB support not available in this version.
(–) SIS(0): sisfb not found
(–) SIS(0): Relocated I/O registers at 0x9000
(II) Loading sub module “ramdac”
(II) LoadModule: “ramdac”
(II) Module “ramdac” already built-in
() SIS(0): Depth 24, (–) framebuffer bpp 32
(==) SIS(0): RGB weight 888
(==) SIS(0): Default visual is TrueColor
(WW) SIS(0): Could not find/read video BIOS
() SIS(0): Option “NoAccel” “0”
() SIS(0): Option “DRI” “on”
() SIS(0): Option “EnableSiSCtrl” “yes”
(==) SIS(0): Color HW cursor is enabled
(II) SIS(0): Using VRAM command queue, size 512k
(==) SIS(0): Hotkey display switching is enabled
() SIS(0): SiSCtrl utility interface is enabled
(==) SIS(0): X server will not keep DPI constant for all screen sizes
() SIS(0): DRI enabled
(II) SIS(0): Checking OS for SSE support is not supported in this version of X.org
(II) SIS(0): If your OS supports SSE, set the option “UseSSE” to “on”.
(–) SIS(0): 262144K shared video RAM (UMA)
(–) SIS(0): DRAM type: DDR SDRAM
(–) SIS(0): Memory clock: 596.582 MHz
(–) SIS(0): DRAM bus width: 64 bit
(–) SIS(0): Linear framebuffer at 0xC0000000
(–) SIS(0): MMIO registers at 0xD4000000 (size 64K)
(–) SIS(0): VideoRAM: 262144 KB
(II) SIS(0): Using 20480K of framebuffer memory at offset 0K
(II) Loading sub module “ddc”
(II) LoadModule: “ddc”
(II) Module “ddc” already built-in
(–) SIS(0): Detected SiS307LV video bridge (Charter/UMC-1, ID 7; Rev 0xe1)
(–) SIS(0): No CRT1/VGA detected
(–) SIS(0): Detected LCD/plasma panel (1280x800, 11, non-exp., RGB24 [ec2205])
(==) SIS(0): Using gamma correction (1.0, 1.0, 1.0)
(II) SIS(0): CRT1 gamma correction is enabled
(II) SIS(0): Separate Xv gamma correction for CRT1 is disabled
(II) SIS(0): CRT2 gamma correction is enabled
(–) SIS(0): Memory bandwidth at 32 bpp is 1193.16 MHz
(–) SIS(0): Detected LCD PanelDelayCompensation 0x06 (for LCD=CRT2)
(–) SIS(0): Detected LCD PanelDelayCompensation 0x00 (for LCD=CRT1)
(–) SIS(0): 302LV/302ELV: Using EMI 0x6a0d7038 (LCD)
(–) SIS(0): CRT2 DDC probing failed
(==) SIS(0): Min pixel clock is 10 MHz
(–) SIS(0): Max pixel clock is 340 MHz
(II) SIS(0): Replaced entire mode list with built-in modes
(II) SIS(0): Correcting missing CRT2 monitor HSync range
(II) SIS(0): Correcting missing CRT2 monitor VRefresh range
(II) SIS(0): “Unknown reason” in the following list means that the mode
(II) SIS(0): is not supported on the chipset/bridge/current output device.
(II) SIS(0): Configured Monitor: Using hsync range of 30.00-80.00 kHz
(II) SIS(0): Configured Monitor: Using vrefresh range of 59.00-61.00 Hz
(II) SIS(0): Configured Monitor: Using vrefresh value of 71.00 Hz
(II) SIS(0): Clock range: 10.00 to 340.00 MHz
(II) SIS(0): Not using default mode “800x600” (vrefresh out of range)
(II) SIS(0): Not using default mode “800x600” (vrefresh out of range)
(II) SIS(0): Not using default mode “800x600” (vrefresh out of range)
(II) SIS(0): Not using default mode “800x600” (vrefresh out of range)
(II) SIS(0): Not using default mode “800x600” (vrefresh out of range)
(II) SIS(0): Not using default mode “800x600” (vrefresh out of range)
(II) SIS(0): Not using default mode “800x600” (hsync out of range)
(II) SIS(0): Not using default mode “640x480” (vrefresh out of range)
(II) SIS(0): Not using default mode “640x480” (vrefresh out of range)
(II) SIS(0): Not using default mode “640x480” (vrefresh out of range)
(II) SIS(0): Not using default mode “640x480” (vrefresh out of range)
(II) SIS(0): Not using default mode “640x480” (vrefresh out of range)
(II) SIS(0): Not using default mode “640x480” (hsync out of range)
(II) SIS(0): Not using default mode “640x480” (hsync out of range)
(II) SIS(0): Not using default mode “1024x768” (vrefresh out of range)
(II) SIS(0): Not using default mode “1024x768” (vrefresh out of range)
(II) SIS(0): Not using default mode “1024x768” (vrefresh out of range)
(II) SIS(0): Not using default mode “1024x768” (vrefresh out of range)
(II) SIS(0): Not using default mode “1024x768” (hsync out of range)
(II) SIS(0): Not using default mode “1024x768” (hsync out of range)
(II) SIS(0): Not using default mode “1280x1024” (unknown reason)
(II) SIS(0): Not using default mode “1280x1024” (unknown reason)
(II) SIS(0): Not using default mode “1280x1024” (unknown reason)
(II) SIS(0): Not using default mode “1280x1024” (unknown reason)
(II) SIS(0): Not using default mode “1600x1200” (unknown reason)
(II) SIS(0): Not using default mode “1600x1200” (unknown reason)
(II) SIS(0): Not using default mode “1600x1200” (unknown reason)
(II) SIS(0): Not using default mode “1600x1200” (unknown reason)
(II) SIS(0): Not using default mode “1600x1200” (unknown reason)
(II) SIS(0): Not using default mode “1600x1200” (unknown reason)
(II) SIS(0): Not using default mode “1600x1200” (unknown reason)
(II) SIS(0): Not using default mode “1920x1440” (unknown reason)
(II) SIS(0): Not using default mode “1920x1440” (unknown reason)
(II) SIS(0): Not using default mode “1920x1440” (unknown reason)
(II) SIS(0): Not using default mode “1920x1440” (unknown reason)
(II) SIS(0): Not using default mode “1920x1440” (unknown reason)
(II) SIS(0): Not using default mode “1920x1440” (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode “2048x1536” (unknown reason)
(II) SIS(0): Not using default mode “2048x1536” (unknown reason)
(II) SIS(0): Not using default mode “2048x1536” (unknown reason)
(II) SIS(0): Not using default mode “2048x1536” (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode “2048x1536” (bad mode clock/interlace/doublescan)
(II) SIS(0): Not using default mode “1280x800” (vrefresh out of range)
(II) SIS(0): Not using default mode “1280x800” (hsync out of range)
(II) SIS(0): Not using mode “1280x1024” (no mode of this name)
(–) SIS(0): Virtual size is 1280x800 (pitch 1280)
() SIS(0): Default mode “1280x800” (1280x800) (For CRT device: 107.9 MHz, 63.9 kHz, 59.9 Hz)
() SIS(0): Default mode “1024x768” (1024x768) (For CRT device: 65.1 MHz, 48.5 kHz, 60.1 Hz)
() SIS(0): Default mode “800x600” (800x600) (For CRT device: 40.0 MHz, 37.9 kHz, 60.3 Hz)
() SIS(0): Default mode “640x480” (640x480) (For CRT device: 25.1 MHz, 31.3 kHz, 59.7 Hz)
(==) SIS(0): DPI set to (96, 96)
(II) Loading sub module “fb”
(II) LoadModule: “fb”
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module “xaa”
(II) LoadModule: “xaa”
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(II) SIS(0): 2D acceleration enabled, modename xaa
(–) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don’t.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MSB
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MSB
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MSB
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) ISB
[10] 0 0 0x000003c0 - 0x000003df (0x20) ISB
(II) Loading sub module “vbe”
(II) LoadModule: “vbe”
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module “int10”
(II) LoadModule: “int10”
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) SIS(0): initializing int10
(II) SIS(0): Primary V_BIOS segment is: 0xc000
(II) SIS(0): VESA BIOS detected
(II) SIS(0): VESA VBE Version 3.0
(II) SIS(0): VESA VBE Total Mem: 262144 kB
(II) SIS(0): VESA VBE OEM: SiS
(II) SIS(0): VESA VBE OEM Software Rev: 1.0
(II) SIS(0): VESA VBE OEM Vendor: Silicon Integrated Systems Corp.
(II) SIS(0): VESA VBE OEM Product: 6330
(II) SIS(0): VESA VBE OEM Product Rev: 3.74.10A
(II) SIS(0): Setting standard mode 0x16
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) SIS(0): [drm] Using the DRM lock SAREA also for drawables.
(II) SIS(0): [drm] framebuffer handle = 0xc0000000
(II) SIS(0): [drm] added 1 reserved context for kernel
(II) SIS(0): X context handle = 0x1
(II) SIS(0): [drm] installed DRM signal handler
(II) SIS(0): [dri] Video RAM memory heap: 0x1400000 to 0xff70000 (241088KB)
(II) SIS(0): [drm] MMIO registers mapped to 0xd4000000
(II) SIS(0): [drm] AGP enabled
(II) SIS(0): [drm] Allocated 32MB AGP memory
(II) SIS(0): [drm] Bound 32MB AGP memory
(II) SIS(0): [drm] No valid IRQ number for device 1:0:0 (code -22)
(II) SIS(0): [dri] Visual configs initialized
(II) SIS(0): Framebuffer from (0,0) to (1279,4094)
(II) SIS(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Solid Lines
Dashed Lines
Setting up tile and stipple cache:
32 128x128 slots
26 256x256 slots
7 512x512 slots
32 8x8 color pattern slots
(–) SIS(0): CPU frequency 800.00Mhz
(II) SIS(0): Benchmarking system RAM to video RAM memory transfer methods:
(–) SIS(0): Checked libc memcpy()… 100.6 MiB/s
(–) SIS(0): Checked built-in-1 memcpy()… 94.2 MiB/s
(–) SIS(0): Checked built-in-2 memcpy()… 48.3 MiB/s
(–) SIS(0): Checked MMX memcpy()… 100.7 MiB/s
(–) SIS(0): Checked MMX2 memcpy()… 101.4 MiB/s
(–) SIS(0): Using MMX2 method for aligned data transfers to video RAM
(–) SIS(0): Using MMX2 method for unaligned data transfers to video RAM
(==) SIS(0): Backing store disabled
(==) SIS(0): Silken mouse enabled
(II) SIS(0): DPMS enabled
(–) SIS(0): Hardware supports one video overlay
(II) SIS(0): Using SiS300/315/330/340/350 series HW Xv by default on CRT2
(II) SIS(0): [MC] XvMC adaptor is initialized succfully.
(II) SIS(0): Default Xv adaptor is Video Overlay
(II) SIS(0): [DRI] installation complete
(II) SIS(0): Direct rendering enabled
(WW) SIS(0): Option “Composite” is not used
(WW) SIS(0): Option “AccelMethod” is not used
(WW) SIS(0): Option “MigrationHeuristic” is not used
(II) SIS(0): Initialized SISCTRL extension version 0.1
(II) SIS(0): Registered screen 0 with SISCTRL extension version 0.1
(==) RandR enabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(EE) AIGLX error: dlopen of /usr/lib/dri/sis315_dri.so failed (/usr/lib/dri/sis315_dri.so: cannot open shared object file: No such file or directory)
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0