Souris usb figée démarrage

Support Debian
#1

Bonjour à tous,

Nouveau sur le forum, j’ai un soucis avec ma debian squeeze 64

Au démarrage de gdm3 mon curseur de souris USB reste figé. Obligé de déconnecter-rebrancher sur la souris du port USB à chaque démarrage de X.

Problème plus ou moins persistant car la souris a fonctionné de façon plus ou moins aléatoire avec les drivers d’affichage “ati”, mais pas avec “radeon”, ni “fglrx”. Malheureusement, je n’ai pas pensé à sauvegarder mes xorg.conf, ni logs. J’ai fait l’installation des drivers en passant par le script sgfxi qui génère un xorg.conf.

J’ai 2 ports USB utilisés :
1 souris
1 modem CT350 (type Sagem f@st 800)

J’ai essayé de chercher côté config de mon xorg.conf et udev… mais ma trop courte expérience de la banquise fait que je ne trouve pas la solution.

Des idées ??

Voilà quelques résultats de commandes et logs:

~$ uname -a Linux deblu 2.6.32-5-amd64 #1 SMP Wed Aug 25 13:59:41 UTC 2010 x86_64 GNU/Linux

~$ lsusb Bus 002 Device 005: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical Bus 002 Device 004: ID 1110:900f Analog Devices Canada, Ltd (Allied Telesyn) AT-AR215 DSL Modem Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

$ lspci 00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) 00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a2) 00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2) 00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 02:00.0 VGA compatible controller: ATI Technologies Inc RV770 [Radeon HD 4850] 02:00.1 Audio device: ATI Technologies Inc HD48x0 audio

~$ lsmod Module Size Used by ppp_deflate 3410 0 zlib_deflate 17746 1 ppp_deflate bsd_comp 4452 0 pppoatm 2596 1 ppp_generic 19259 7 ppp_deflate,bsd_comp,pppoatm slhc 4003 1 ppp_generic xt_state 1303 1 iptable_filter 2258 1 ipt_MASQUERADE 1554 1 iptable_nat 4299 1 nf_nat 13388 2 ipt_MASQUERADE,iptable_nat nf_conntrack_ipv4 9833 4 iptable_nat,nf_nat nf_conntrack 46535 5 xt_state,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4 nf_defrag_ipv4 1139 1 nf_conntrack_ipv4 iptable_mangle 2817 0 ip_tables 13899 3 iptable_filter,iptable_nat,iptable_mangle x_tables 12845 4 xt_state,ipt_MASQUERADE,iptable_nat,ip_tables ppdev 5030 0 lp 7462 0 powernow_k8 10978 1 cpufreq_userspace 1992 0 cpufreq_stats 2659 0 cpufreq_conservative 5162 0 cpufreq_powersave 902 0 binfmt_misc 6431 1 snd_hda_codec_atihdmi 2251 1 snd_hda_codec_analog 64562 1 snd_hda_intel 19987 1 snd_hda_codec 54244 3 snd_hda_codec_atihdmi,snd_hda_codec_analog,snd_hda_intel snd_hwdep 5380 1 snd_hda_codec snd_seq_midi 4400 0 snd_pcm_oss 32591 0 snd_rawmidi 15515 1 snd_seq_midi snd_mixer_oss 12606 1 snd_pcm_oss ueagle_atm 24357 0 usbatm 11318 2 ueagle_atm atm 32340 4 pppoatm,usbatm snd_seq_midi_event 4628 1 snd_seq_midi i2c_nforce2 5280 0 amd64_edac_mod 13646 0 i2c_core 15712 1 i2c_nforce2 k8temp 3155 0 edac_core 29261 3 amd64_edac_mod snd_seq 42881 2 snd_seq_midi,snd_seq_midi_event snd_pcm 60471 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss snd_timer 15582 2 snd_seq,snd_pcm snd_seq_device 4493 3 snd_seq_midi,snd_rawmidi,snd_seq edac_mce_amd 6433 1 amd64_edac_mod parport_pc 18855 1 asus_atk0110 7686 0 parport 27954 3 ppdev,lp,parport_pc snd 46446 13 snd_hda_codec_analog,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_rawmidi,snd_mixer_oss,snd_seq,snd_pcm,snd_timer,snd_seq_device soundcore 4598 1 snd snd_page_alloc 6249 2 snd_hda_intel,snd_pcm evdev 7352 11 button 4650 0 pcspkr 1699 0 processor 30303 1 powernow_k8 fuse 50206 3 nls_utf8 1208 1 nls_cp850 5049 1 vfat 7884 1 fat 40038 1 vfat fglrx 2368512 28 loop 11799 0 ext3 106518 2 jbd 37085 1 ext3 mbcache 5050 1 ext3 sg 18744 0 usbhid 33276 0 sr_mod 12602 0 hid 62857 1 usbhid cdrom 29415 1 sr_mod sd_mod 29777 6 crc_t10dif 1276 1 sd_mod ata_generic 2983 0 ohci_hcd 19212 0 floppy 49087 0 thermal 11674 0 thermal_sys 11942 2 processor,thermal sata_nv 19166 0 pata_amd 9869 5 forcedeth 45448 0 libata 133584 3 ata_generic,sata_nv,pata_amd ehci_hcd 31135 0 scsi_mod 122117 4 sg,sr_mod,sd_mod,libata usbcore 121938 6 ueagle_atm,usbatm,usbhid,ohci_hcd,ehci_hcd nls_base 6377 5 nls_utf8,nls_cp850,vfat,fat,usbcore

ls -la /dev/input/ total 0 drwxr-xr-x 4 root root 280 17 sept. 21:25 . drwxr-xr-x 15 root root 3420 17 sept. 21:25 .. drwxr-xr-x 2 root root 80 17 sept. 21:25 by-id drwxr-xr-x 2 root root 120 17 sept. 21:25 by-path crw------- 1 root root 13, 64 17 sept. 2010 event0 crw------- 1 root root 13, 65 17 sept. 21:25 event1 crw------- 1 root root 13, 66 17 sept. 21:25 event2 crw------- 1 root root 13, 67 17 sept. 21:25 event3 crw------- 1 root root 13, 68 17 sept. 21:25 event4 crw------- 1 root root 13, 69 17 sept. 21:25 event5 crw------- 1 root root 13, 70 17 sept. 21:25 event6 crw------- 1 root root 13, 63 17 sept. 2010 mice crw------- 1 root root 13, 32 17 sept. 2010 mouse0 crw------- 1 root root 13, 33 17 sept. 21:25 mouse1

Le fichier /etc/modules

[code]# /etc/modules: kernel modules to load at boot time.

This file contains the names of kernel modules that should be loaded

at boot time, one per line. Lines beginning with “#” are ignored.

Parameters can be specified after the module name.

loop
fglrx[/code]

Mon xorg.conf minimal

[code]Section "Device"
Identifier "ATI"
Driver "fglrx"
EndSection

Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection[/code]

mon Xorg-log

[code]
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-5-amd64 x86_64 Debian
Current Operating System: Linux deblu 2.6.32-5-amd64 #1 SMP Wed Aug 25 13:59:41 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=669b663c-379f-4671-8596-a38d0557490f ro quiet
Build Date: 24 August 2010 02:20:59PM
xorg-server 2:1.7.7-4 (Julien Cristau jcristau@debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Fri Sep 17 21:25:36 2010
(==) Using config file: “/etc/X11/xorg.conf”
(==) Using system config directory “/usr/share/X11/xorg.conf.d”
(==) No Layout section. Using the first Screen section.
() |–>Screen “Default Screen” (0)
() | |–>Monitor “”
(==) No device specified for screen “Default Screen”.
Using the first device section listed.
() | |–>Device “ATI”
(==) No monitor specified for screen “Default Screen”.
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
(==) ModulePath set to “/usr/lib/xorg/modules”
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x7c5f40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7

(–) PCI:*(0:2:0:0) 1002:9442:174b:e104 ATI Technologies Inc RV770 [Radeon HD 4850] rev 0, Mem @ 0xc0000000/268435456, 0xdfff0000/65536, I/O @ 0x0000e800/256, BIOS @ 0x???/131072
(II) Open ACPI successful (/var/run/acpid.socket)
(II) LoadModule: “extmod”
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “dbe”
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: “glx”
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.5.0, module version = 1.0.0
(II) Loading extension GLX
(II) LoadModule: “record”
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: “dri”
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: “dri2”
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: “fglrx”
(II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.75.5
Module class: X.Org Video Driver
(II) Loading sub module “fglrxdrm”
(II) LoadModule: “fglrxdrm”
(II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 1.7.1, module version = 8.75.5
(II) ATI Proprietary Linux Driver Version Identifier:8.75.5
(II) ATI Proprietary Linux Driver Release Identifier: 8.753
(II) ATI Proprietary Linux Driver Build Date: Jun 29 2010 22:08:06
(II) Primary Device is: PCI 02@00:00:0
(WW) Falling back to old probe method for fglrx
(II) Loading PCS database from /etc/ati/amdpcsdb
(–) Assigning device section with no busID to primary device
(–) Chipset Supported AMD Graphics Processor (0x9442) found
(WW) fglrx: No matching Device section for instance (BusID PCI:0@2:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) fglrx(0): pEnt->device->identifier=0x165eb50
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module “vgahw”
(II) LoadModule: “vgahw”
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor=“X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): Creating default Display subsection in Screen section
"Default Screen” for depth/fbbpp 24/32
() fglrx(0): Depth 24, (–) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB
(==) fglrx(0): Buffer Tiling is ON
(II) Loading sub module “fglrxdrm”
(II) LoadModule: “fglrxdrm”
(II) Reloading /usr/lib/xorg/modules/linux/libfglrxdrm.so
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:2:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 11, (OK)
ukiOpenByBusid: ukiOpenMinor returns 11
ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
(==) fglrx(0): NoAccel = NO
() fglrx(0): ATI 2D Acceleration Architecture disabled, using XAA
(–) fglrx(0): Chipset: "ATI Radeon HD 4800 Series " (Chipset = 0x9442)
(–) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe104)
(==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(–) fglrx(0): Linear framebuffer (phys) at 0xc0000000
(–) fglrx(0): MMIO registers at 0xdfff0000
(–) fglrx(0): I/O port at 0x0000e800
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): AC Adapter is used
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module “vbe”
(II) LoadModule: “vbe”
(II) Loading /usr/lib/xorg/modules/libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 11.21
(II) fglrx(0): VESA VBE OEM Vendor: © 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: 1
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
(–) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR3
(II) fglrx(0): PCIE card detected
(–) fglrx(0): Using per-process page tables (PPPT) as GART.
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) fglrx(0): Using adapter: 2:0.0.
(II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
(II) fglrx(0): Interrupt handler installed at IRQ 28.
(II) fglrx(0): RandR 1.2 support is enabled!
(II) fglrx(0): RandR 1.2 rotation support is enabled!
(==) fglrx(0): Center Mode is disabled
(II) Loading sub module “fb”
(II) LoadModule: “fb”
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module “ddc”
(II) LoadModule: “ddc”
(II) Module “ddc” already built-in
(II) fglrx(0): Finished Initialize PPLIB!
(II) Loading sub module “ddc”
(II) LoadModule: “ddc”
(II) Module “ddc” already built-in
(II) fglrx(0): Connected Display0: DFP on secondary TMDS [tmds2i]
(II) fglrx(0): Display0 EDID data ---------------------------
(II) fglrx(0): Manufacturer: SAM Model: 274 Serial#: 1296380217
(II) fglrx(0): Year: 2007 Week: 11
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Digital Display Input
(II) fglrx(0): Max Image Size [cm]: horiz.: 41 vert.: 26
(II) fglrx(0): Gamma: 2.35
(II) fglrx(0): DPMS capabilities: Off
(II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.640 redY: 0.329 greenX: 0.300 greenY: 0.600
(II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
(II) fglrx(0): Supported established timings:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@67Hz
(II) fglrx(0): 640x480@72Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@56Hz
(II) fglrx(0): 800x600@60Hz
(II) fglrx(0): 800x600@72Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 832x624@75Hz
(II) fglrx(0): 1024x768@60Hz
(II) fglrx(0): 1024x768@70Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): 1280x1024@75Hz
(II) fglrx(0): 1152x864@75Hz
(II) fglrx(0): Manufacturer’s mask: 0
(II) fglrx(0): Supported standard timings:
(II) fglrx(0): #0: hsize: 1440 vsize 900 refresh: 60 vid: 149
(II) fglrx(0): #1: hsize: 1440 vsize 900 refresh: 75 vid: 3989
(II) fglrx(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 60 vid: 16513
(II) fglrx(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) fglrx(0): Supported detailed timing:
(II) fglrx(0): clock: 106.5 MHz Image Size: 410 x 257 mm
(II) fglrx(0): h_active: 1440 h_sync: 1520 h_sync_end 1672 h_blank_end 1904 h_border: 0
(II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 934 v_border: 0
(II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
(II) fglrx(0): Monitor name: SyncMaster
(II) fglrx(0): Serial No: HSGP300243
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff004c2d74023931454d
(II) fglrx(0): 0b11010380291a872ade95a3544c9926
(II) fglrx(0): 0f5054bfef809500950f81808140714f
(II) fglrx(0): 0101010101019a29a0d0518422305098
(II) fglrx(0): 36009a011100001c000000fd00384b1e
(II) fglrx(0): 510e000a202020202020000000fc0053
(II) fglrx(0): 796e634d61737465720a2020000000ff
(II) fglrx(0): 00485347503330303234330a20200073
(II) fglrx(0): End of Display0 EDID data --------------------
(II) fglrx(0): Output DFP2 has no monitor section
(II) fglrx(0): Output DFP_EXTTMDS has no monitor section
(II) fglrx(0): Output CRT1 has no monitor section
(II) fglrx(0): Output CRT2 has no monitor section
(II) fglrx(0): EDID vendor “SAM”, prod id 628
(II) fglrx(0): Using EDID range info for horizontal sync
(II) fglrx(0): Using EDID range info for vertical refresh
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Output DFP2 connected
(II) fglrx(0): Output DFP_EXTTMDS disconnected
(II) fglrx(0): Output CRT1 disconnected
(II) fglrx(0): Output CRT2 disconnected
(II) fglrx(0): Using exact sizes for initial modes
(II) fglrx(0): Output DFP2 using initial mode 1440x900
(II) fglrx(0): Display dimensions: (410, 260) mm
(II) fglrx(0): DPI set to (89, 87)
(II) fglrx(0): Adapter ATI Radeon HD 4800 Series has 2 configurable heads and 1 displays connected.
(==) fglrx(0): QBS disabled
(==) fglrx(0): PseudoColor visuals disabled
(II) Loading sub module “ramdac”
(II) LoadModule: “ramdac”
(II) Module “ramdac” already built-in
(==) fglrx(0): NoDRI = NO
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): OpenGL ClientDriverName: “fglrx_dri.so”
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(–) Depth 24 pixmap format is 32 bpp
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing swlDriScreenInit
(II) fglrx(0): swlDriScreenInit for fglrx driver
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:2:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 16, (OK)
ukiOpenByBusid: ukiOpenMinor returns 16
ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
(II) fglrx(0): [uki] DRM interface version 1.0
(II) fglrx(0): [uki] created “fglrx” driver at busid “PCI:2:0:0”
(II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
(II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f81dc8fe000
(II) fglrx(0): [uki] framebuffer handle = 0x3000
(II) fglrx(0): [uki] added 1 reserved context for kernel
(II) fglrx(0): swlDriScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.75.5
(II) fglrx(0): Date: Jun 29 2010
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.32-5-amd64
(II) fglrx(0): Build-Kernel MODVERSIONS: no
(II) fglrx(0): Build-Kernel SMP: no
(II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
(II) fglrx(0): [uki] register handle = 0x00004000
(II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010a8000
(II) fglrx(0): FBMM initialized for area (0,0)-(1664,2624)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1664,1664) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1664 x 960
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(==) fglrx(0): DPMS enabled
(II) fglrx(0): Initialized in-driver Xinerama extension
() fglrx(0): Textured Video is enabled.
(II) LoadModule: “glesx”
(II) Loading /usr/lib/xorg/modules/glesx.so
(II) Module glesx: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension GLESX
(II) Loading sub module “xaa”
(II) LoadModule: “xaa”
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) fglrx(0): GLESX enableFlags = 94
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Driver provided ScreenToScreenBitBlt replacement
Driver provided FillSolidRects replacement
(II) fglrx(0): GLESX is enabled
(II) LoadModule: “amdxmm”
(II) Loading /usr/lib/xorg/modules/amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 1.0.0
(II) Loading extension AMDXVOPL
(II) fglrx(0): UVD2 feature is available
(II) fglrx(0): Enable composite support successfully
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): [DRI] installation complete
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using HW cursor of display infrastructure!
(II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
(–) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
ukiDynamicMajor: found major device number 251
ukiDynamicMajor: found major device number 251
ukiOpenByBusid: Searching for BusID PCI:2:0:0
ukiOpenDevice: node name is /dev/ati/card0
ukiOpenDevice: open result is 17, (OK)
ukiOpenByBusid: ukiOpenMinor returns 17
ukiOpenByBusid: ukiGetBusid reports PCI:2:0:0
(II) AIGLX: Loaded and initialized /usr/lib64/dri/fglrx_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) fglrx(0): Enable the clock gating!
(II) fglrx(0): Setting screen physical size to 381 x 238
(II) config/udev: Adding input device Power Button (/dev/input/event5)
() Power Button: Applying InputClass “evdev keyboard catchall”
(II) LoadModule: “evdev”
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
() Power Button: always reports core events
() Power Button: Device: “/dev/input/event5”
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD)
() Option “xkb_rules” “evdev”
() Option “xkb_model” “pc105”
() Option “xkb_layout” “fr”
() Option “xkb_variant” “oss_latin9”
(II) config/udev: Adding input device Power Button (/dev/input/event4)
() Power Button: Applying InputClass “evdev keyboard catchall”
() Power Button: always reports core events
() Power Button: Device: “/dev/input/event4”
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device “Power Button” (type: KEYBOARD)
() Option “xkb_rules” “evdev”
() Option “xkb_model” “pc105”
() Option “xkb_layout” “fr”
() Option “xkb_variant” “oss_latin9”
(II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye™ (/dev/input/event2)
() Microsoft Microsoft 3-Button Mouse with IntelliEye™: Applying InputClass “evdev pointer catchall”
() Microsoft Microsoft 3-Button Mouse with IntelliEye™: Applying InputClass “mouse-all”
() Microsoft Microsoft 3-Button Mouse with IntelliEye™: always reports core events
() Microsoft Microsoft 3-Button Mouse with IntelliEye™: Device: “/dev/input/event2”
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye™: Found 3 mouse buttons
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye™: Found scroll wheel(s)
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye™: Found relative axes
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye™: Found x and y relative axes
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye™: Configuring as mouse
() Microsoft Microsoft 3-Button Mouse with IntelliEye™: YAxisMapping: buttons 4 and 5
() Microsoft Microsoft 3-Button Mouse with IntelliEye™: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device “Microsoft Microsoft 3-Button Mouse with IntelliEye™” (type: MOUSE)
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye™: initialized for relative axes.
(II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye™ (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event1)
() AT Translated Set 2 keyboard: Applying InputClass “evdev keyboard catchall”
() AT Translated Set 2 keyboard: always reports core events
() AT Translated Set 2 keyboard: Device: “/dev/input/event1”
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device “AT Translated Set 2 keyboard” (type: KEYBOARD)
() Option “xkb_rules” “evdev”
() Option “xkb_model” “pc105”
() Option “xkb_layout” “fr”
() Option “xkb_variant” “oss_latin9”
(II) config/udev: Adding input device PC Speaker (/dev/input/event3)
(II) No input driver/identifier specified (ignoring)
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/event0)
() Macintosh mouse button emulation: Applying InputClass “evdev pointer catchall”
() Macintosh mouse button emulation: Applying InputClass “mouse-all”
() Macintosh mouse button emulation: always reports core events
() Macintosh mouse button emulation: Device: “/dev/input/event0”
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
() Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
() Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device “Macintosh mouse button emulation” (type: MOUSE)
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/udev: Adding input device Macintosh mouse button emulation (/dev/input/mouse0)
(II) No input driver/identifier specified (ignoring)
(II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
(II) fglrx(0): EDID vendor “SAM”, prod id 628
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): EDID vendor “SAM”, prod id 628
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) fglrx(0): EDID vendor “SAM”, prod id 628
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) config/udev: removing device Microsoft Microsoft 3-Button Mouse with IntelliEye™
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye™: Close
(II) UnloadModule: “evdev”
(II) fglrx(0): EDID vendor “SAM”, prod id 628
(II) fglrx(0): Using hsync ranges from config file
(II) fglrx(0): Using vrefresh ranges from config file
(II) fglrx(0): Printing DDC gathered Modelines:
(II) fglrx(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz)
(II) fglrx(0): Modeline "1440x900"x0.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz)
(II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
(II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye™ (/dev/input/event2)
() Microsoft Microsoft 3-Button Mouse with IntelliEye™: Applying InputClass “evdev pointer catchall”
() Microsoft Microsoft 3-Button Mouse with IntelliEye™: Applying InputClass “mouse-all”
() Microsoft Microsoft 3-Button Mouse with IntelliEye™: always reports core events
() Microsoft Microsoft 3-Button Mouse with IntelliEye™: Device: “/dev/input/event2”
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye™: Found 3 mouse buttons
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye™: Found scroll wheel(s)
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye™: Found relative axes
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye™: Found x and y relative axes
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye™: Configuring as mouse
() Microsoft Microsoft 3-Button Mouse with IntelliEye™: YAxisMapping: buttons 4 and 5
() Microsoft Microsoft 3-Button Mouse with IntelliEye™: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device “Microsoft Microsoft 3-Button Mouse with IntelliEye™” (type: MOUSE)
(II) Microsoft Microsoft 3-Button Mouse with IntelliEye™: initialized for relative axes.
(II) config/udev: Adding input device Microsoft Microsoft 3-Button Mouse with IntelliEye™ (/dev/input/mouse1)
(II) No input driver/identifier specified (ignoring)[/code]

#2

Bonjour,

Et en ajoutant ça au xorg.conf ( en l’adaptant )

Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection

Ca change qqch ??

#3

Merci Clem-ufo

J’ai essayé en ajoutant:

Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection

Ajouté tel quel car je ne sais pas comment adapter… Pas d’amélioration. Curseur de souris toujours figé au démarrage. Obligé de déconnecter-reconnecter du port USB.

Ce qui m’étonne c’est que dans dans mon /var/log/messages la souris paraît bien détectée une première fois, mais n’est pas activée… Elle se met à fonctionner après une seconde détection.

extrait /var/log/messages :

[ 2.503590] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.504876] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23 [ 2.504882] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 23 (level, low) -> IRQ 23 [ 2.504903] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 2.504906] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 2.504921] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 2.504957] ohci_hcd 0000:00:02.0: irq 23, io mem 0xdfeff000 [ 2.511835] sd 2:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.511875] sd 2:0:0:0: [sda] Write Protect is off [ 2.511877] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.511893] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.512010] sda: sda1 sda2 < sda5 sda6 [ 2.562016] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.562018] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.562020] usb usb2: Product: OHCI Host Controller [ 2.562022] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd [ 2.562024] usb usb2: SerialNumber: 0000:00:02.0 [ 2.562099] usb usb2: configuration #1 chosen from 1 choice [ 2.562126] hub 2-0:1.0: USB hub found [ 2.562134] hub 2-0:1.0: 10 ports detected [ 2.578108] sda7sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray [ 2.578508] Uniform CD-ROM driver Revision: 3.20 [ 2.578581] sr 2:0:1:0: Attached scsi CD-ROM sr0 [ 2.592140] sda8 sda9 sda10 sda11 sda12 sda13 > [ 2.648658] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.653672] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 2.653754] sr 2:0:1:0: Attached scsi generic sg1 type 5 [ 2.937720] usb 2-1: new low speed USB device using ohci_hcd and address 2 [ 3.149032] usb 2-1: New USB device found, idVendor=045e, idProduct=0040 [ 3.149035] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 3.149037] usb 2-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM) [ 3.149039] usb 2-1: Manufacturer: Microsoft [ 3.149122] usb 2-1: configuration #1 chosen from 1 choice [ 3.159153] usbcore: registered new interface driver hiddev [ 3.165241] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input2 [ 3.165307] generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1/input0 [ 3.165326] usbcore: registered new interface driver usbhid [ 3.165328] usbhid: v2.6:USB HID core driver [ 3.328020] usb 2-2: new full speed USB device using ohci_hcd and address 3 [ 3.531034] usb 2-2: New USB device found, idVendor=1110, idProduct=9010 [ 3.531037] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.531118] usb 2-2: configuration #1 chosen from 1 choice [ 3.806621] PM: Starting manual resume from disk [ 3.806626] PM: Resume from partition 8:11 [ 3.806627] PM: Checking hibernation image. [ 3.817682] PM: Error -22 checking image file [ 3.817684] PM: Resume from disk failed. [ 3.849421] kjournald starting. Commit interval 5 seconds [ 3.849430] EXT3-fs: mounted filesystem with ordered data mode. [ 5.969204] Adding 979924k swap on /dev/sda11. Priority:-1 extents:1 across:979924k [ 6.229528] EXT3 FS on sda12, internal journal [ 6.407273] loop: module loaded [ 6.582671] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 6.582675] Disabling lock debugging due to kernel taint [ 6.633762] [fglrx] Maximum main memory to use for locked dma buffers: 1885 MBytes. [ 6.633901] [fglrx] vendor: 1002 device: 9442 count: 1 [ 6.634132] [fglrx] ioport: bar 4, base 0xe800, size: 0x100 [ 6.634425] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19 [ 6.634430] alloc irq_desc for 19 on node 0 [ 6.634432] alloc kstat_irqs on node 0 [ 6.634443] pci 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19 [ 6.634447] pci 0000:02:00.0: setting latency timer to 64 [ 6.634577] [fglrx] Kernel PAT support is enabled [ 6.634602] [fglrx] module loaded - fglrx 8.75.5 [Jun 29 2010] with 1 minors [ 7.247767] kjournald starting. Commit interval 5 seconds [ 7.247948] EXT3 FS on sda13, internal journal [ 7.247953] EXT3-fs: mounted filesystem with ordered data mode. [ 7.317899] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 7.511477] fuse init (API version 7.13) [ 9.858489] udev: starting version 160 [ 9.983776] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 9.983789] ACPI: Power Button [PWRB] [ 9.983847] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 9.983850] ACPI: Power Button [PWRF] [ 9.991183] processor LNXCPU:00: registered as cooling_device0 [ 9.991220] processor LNXCPU:01: registered as cooling_device1 [ 10.471900] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 10.474601] parport_pc 00:06: reported by Plug and Play ACPI [ 10.474645] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 10.477624] NET: Registered protocol family 8 [ 10.477626] NET: Registered protocol family 20 [ 10.898732] [ueagle-atm] driver ueagle 1.4 loaded [ 10.898753] usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X9010) Rev (0X4000): Eagle I [ 11.072021] usb 2-2: reset full speed USB device using ohci_hcd and address 3 [ 11.189625] alloc irq_desc for 27 on node 0 [ 11.189628] alloc kstat_irqs on node 0 [ 11.189638] forcedeth 0000:00:07.0: irq 27 for MSI/MSI-X [ 11.189824] eth0: no link during initialization. [ 11.190519] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 11.275032] usb 2-2: [ueagle-atm] pre-firmware device, uploading firmware [ 11.275068] usb 2-2: [ueagle-atm] loading firmware ueagle-atm/eagleI.fw [ 11.275103] usbcore: registered new interface driver ueagle-atm [ 11.275321] usb 2-2: firmware: requesting ueagle-atm/eagleI.fw [ 11.365313] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 11.865764] EDAC MC: Ver: 2.1.0 Aug 25 2010 [ 11.866434] i2c i2c-0: nForce2 SMBus adapter at 0x600 [ 11.866454] i2c i2c-1: nForce2 SMBus adapter at 0x700 [ 12.177340] EDAC amd64_edac: Ver: 3.2.0 Aug 25 2010 [ 12.177415] EDAC amd64: ECC is enabled by BIOS. [ 12.177447] EDAC MC: Rev F or later detected [ 12.177510] EDAC MC0: Giving out device to 'amd64_edac' 'RevF': DEV 0000:00:18.2 [ 12.177538] EDAC PCI0: Giving out device to module 'amd64_edac' controller 'EDAC PCI controller': DEV '0000:00:18.2' (POLLED) [ 13.503029] usb 2-2: [ueagle-atm] firmware uploaded [ 13.522151] usb 2-2: USB disconnect, address 3 [ 14.167127] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 22 [ 14.167132] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 22 (level, low) -> IRQ 22 [ 14.167136] hda_intel: Disable MSI for Nvidia chipset [ 14.167158] HDA Intel 0000:00:05.0: setting latency timer to 64 [ 14.912617] hda_codec: AD1988: BIOS auto-probing. [ 14.912697] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:05.0/input/input6 [ 15.032420] ACPI: PCI Interrupt Link [LNEA] enabled at IRQ 18 [ 15.032426] alloc irq_desc for 18 on node 0 [ 15.032428] alloc kstat_irqs on node 0 [ 15.032437] HDA Intel 0000:02:00.1: PCI INT B -> Link[LNEA] -> GSI 18 (level, low) -> IRQ 18 [ 15.032488] HDA Intel 0000:02:00.1: setting latency timer to 64 [ 15.980018] usb 2-2: new full speed USB device using ohci_hcd and address 4 [ 16.193030] usb 2-2: New USB device found, idVendor=1110, idProduct=900f [ 16.193033] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=3 [ 16.193035] usb 2-2: Product: ADSL-USB Modem [ 16.193037] usb 2-2: SerialNumber: 0030DA225030 [ 16.193128] usb 2-2: configuration #1 chosen from 1 choice [ 16.237091] usb 2-2: [ueagle-atm] ADSL device founded vid (0X1110) pid (0X900F) Rev (0X4006): Eagle I [ 16.420021] usb 2-2: reset full speed USB device using ohci_hcd and address 4 [ 16.673034] usb 2-2: [ueagle-atm] using iso mode [ 16.673147] usb 2-2: [ueagle-atm] (re)booting started [ 17.788026] usb 2-2: firmware: requesting ueagle-atm/DSPep.bin [ 18.178030] usb 2-2: [ueagle-atm] ATU-R firmware version : 44e2ea17 [ 18.178035] usb 2-2: firmware: requesting ueagle-atm/CMVep.bin.v2 [ 18.187617] usb 2-2: [Ueagle-atm] requesting firmware ueagle-atm/CMVep.bin.v2 failed, try to get older cmvs [ 18.187622] usb 2-2: firmware: requesting ueagle-atm/CMVep.bin [ 18.197345] usb 2-2: [Ueagle-atm] use deprecated cmvs version, please update your firmware [ 18.248029] usb 2-2: [ueagle-atm] modem started, waiting synchronization... [ 19.676310] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ processors (2 cpu cores) (version 2.20.00) [ 19.676372] powernow-k8: 0 : fid 0x16 (3000 MHz), vid 0x8 [ 19.676374] powernow-k8: 1 : fid 0x14 (2800 MHz), vid 0xa [ 19.676376] powernow-k8: 2 : fid 0x12 (2600 MHz), vid 0xc [ 19.676378] powernow-k8: 3 : fid 0x10 (2400 MHz), vid 0xe [ 19.676379] powernow-k8: 4 : fid 0xe (2200 MHz), vid 0x10 [ 19.676381] powernow-k8: 5 : fid 0xc (2000 MHz), vid 0x10 [ 19.676382] powernow-k8: 6 : fid 0xa (1800 MHz), vid 0x10 [ 19.676384] powernow-k8: 7 : fid 0x2 (1000 MHz), vid 0x12 [ 20.004022] Clocksource tsc unstable (delta = -159499964 ns) [ 23.009556] lp0: using parport0 (interrupt-driven). [ 23.075345] ppdev: user-space parallel port driver [ 24.864642] alloc irq_desc for 28 on node 0 [ 24.864650] alloc kstat_irqs on node 0 [ 24.864671] fglrx_pci 0000:02:00.0: irq 28 for MSI/MSI-X [ 24.866181] [fglrx] Firegl kernel thread PID: 1829 [ 24.866466] [fglrx] IRQ 28 Enabled [ 25.521681] [fglrx] Gart USWC size:628 M. [ 25.521686] [fglrx] Gart cacheable size:247 M. [ 25.521693] [fglrx] Reserved FB block: Shared offset:0, size:1000000 [ 25.521696] [fglrx] Reserved FB block: Unshared offset:fe07000, size:1f9000 [ 25.521699] [fglrx] Reserved FB block: Unshared offset:3fffb000, size:5000 [ 29.253039] usb 2-2: [ueagle-atm] modem operational [ 62.124037] usb 2-1: USB disconnect, address 2 [ 64.764023] usb 2-1: new low speed USB device using ohci_hcd and address 5 [ 64.978046] usb 2-1: New USB device found, idVendor=045e, idProduct=0040 [ 64.978055] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 64.978061] usb 2-1: Product: Microsoft 3-Button Mouse with IntelliEye(TM) [ 64.978067] usb 2-1: Manufacturer: Microsoft [ 64.978287] usb 2-1: configuration #1 chosen from 1 choice [ 64.988756] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:02.0/usb2/2-1/2-1:1.0/input/input7 [ 64.989061] generic-usb 0003:045E:0040.0002: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-1/input0 [ 76.889608] ip_tables: (C) 2000-2006 Netfilter Core Team [ 76.928966] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 76.930154] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 76.930160] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 76.930165] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 77.221057] PPP generic driver version 2.4.2 [ 77.582678] PPP BSD Compression module registered [ 77.630725] PPP Deflate Compression module registered

#4

La souris est reconnue normalement quand le modem USB est débranché.

Quelqu’un peut m’expliquer la marche à suivre pour signaler le bug ? quelles infos donner ?

J’ai trouvé un précédent sur un autre forum :
http://assiste.forum.free.fr/viewtopic.php?p=146104&sid=b1508e0c7f028bf24a0ebac7acab51bc

#5

un petit up…

J’ai essayé de modifier mon xorg.conf en mettant les bonnes valeurs /dev/input/event2 ou /dev/input/mouse1 (ce qui correspond bien à ma souris usb dans le xorg.log). J’ai installé xserver-xorg-input-mouse pour le driver “mouse”… Malheureusement, il manque un petit quelque chose car ça ne fonctionne toujours pas.

Voici mon xorg.conf pour la souris :

Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mouse1" Option "Emulate3Buttons" "no" Option "Buttons" "3" Option "ZAxisMapping" "4 5" EndSection

Toute idée sera bienvenue, car là je sèche complètement.

#6

Pour ceux qui auraient le même problème :
Malheureusement, je n’ai pas trouvé de solution satisfaisant en laissant la souris + modem en USB.
La souris n’est pas en freeze si le modem est débranché au démarrage. Sinon, elle freeze.

J’ai trouvé une solution batarde en branchant la souris sur le port PS/2 avec un adaptateur USB>PS/2.

#7

Ok, mais afin d’éviter de mettre tous tes logs et d’y voir plus clair :
fait un

Débranche ta souris et met là sur un port USB et copies/colles les nouvelles lignes que cela t’a affiché :wink: