Xorg plantage total

Support Debian
#1

Bonsoir,

Je possède un netbook Vaio doté d’une carte Intel 945 GME et d’un écran avec une résolution de 1366*768.7
Impossible de démarrer Gnome dessus.
J’ai essayé en testing en SID pareil :

[code]X.Org X Server 1.7.4
Release Date: 2010-01-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-trunk-686 i686 Debian
Current Operating System: Linux vaio 2.6.32-trunk-686 #1 SMP Sun Jan 10 06:32:16 UTC 2010 i686
Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.32-trunk-686 root=UUID=497cb2b1-9d2d-4b49-82c2-1fe0484b2b5c ro quiet single
Build Date: 20 January 2010 10:52:55PM
xorg-server 2:1.7.4-2 (bgoglin@debian.org)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Mon Feb 8 18:15:54 2010
(==) Using config file: “/etc/X11/xorg.conf”
(==) ServerLayout “X.org Configured”
() |–>Screen “Screen0” (0)
() | |–>Monitor “Monitor0”
() | |–>Device “Card0”
() |–>Input Device “Mouse0”
() |–>Input Device “Keyboard0”
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
Entry deleted from font path.
(WW) The directory “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType” does not exist.
Entry deleted from font path.
(WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
Entry deleted from font path.
(WW) The directory “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType” does not exist.
Entry deleted from font path.
() FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins,
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
() ModulePath set to “/usr/lib/xorg/modules”
(WW) AllowEmptyInput is on, devices using drivers ‘kbd’, ‘mouse’ or ‘vmmouse’ will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x81e7680
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(–) using VT number 2

(–) PCI:*(0:0:2:0) 8086:27ae:104d:9064 Intel Corporation Mobile 945GME Express Integrated Graphics Controller rev 3, Mem @ 0xf0000000/524288, 0xd0000000/268435456, 0xf0400000/262144, I/O @ 0x00001800/8
(–) PCI: (0:0:2:1) 8086:27a6:104d:9064 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xf0080000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) “extmod” will be loaded. This was enabled by default and also specified in the config file.
(II) “dbe” will be loaded. This was enabled by default and also specified in the config file.
(II) “glx” will be loaded. This was enabled by default and also specified in the config file.
(II) “record” will be loaded. This was enabled by default and also specified in the config file.
(II) “dri” will be loaded. This was enabled by default and also specified in the config file.
(II) “dri2” will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: “extmod”
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “dbe”
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: “dri2”
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: “glx”
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: “dri”
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: “record”
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.4, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: “intel”
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.3.902, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (–) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel® 945GME
(–) intel(0): Chipset: “945GME”
(II) intel(0): Output VGA1 using monitor section Monitor0
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 disconnected
(WW) intel(0): No outputs definitely connected, trying again…
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 disconnected
(WW) intel(0): Unable to find initial modes
(==) intel(0): video overlay key set to 0x101fe
(EE) intel(0): No modes.
(II) UnloadModule: “intel”
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at “/var/log/Xorg.0.log” for additional information.
[/code]

Xorg.conf:

[code]Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 “Screen0” 0 0
InputDevice “Mouse0” "CorePointer"
InputDevice “Keyboard0” "CoreKeyboard"
EndSection

Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "built-ins"
EndSection

Section "Module"
Load "extmod"
Load "dbe"
Load "dri2"
Load "glx"
Load "dri"
Load "record"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option “Protocol” "auto"
Option “Device” "/dev/input/mice"
Option “ZAxisMapping” "4 5 6 7"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section “Device”
### Available Driver options are:-
### Values: : integer, : float, : “True”/“False”,
### : “String”, : " Hz/kHz/MHz"
### [arg]: arg optional
#Option “NoAccel” # []
#Option “SWcursor” # []
#Option “ColorKey” #
#Option “CacheLines” #
#Option “Dac6Bit” # []
#Option “DRI” # []
#Option “NoDDC” # []
#Option “ShowCache” # []
#Option “XvMCSurfaces” #
#Option “PageFlip” # []
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GME Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1366x768"
EndSubSection
EndSection
[/code]

Le truc drole c’est que si je branche un écran externe ca marche !! Il semble ne pas detecter mon écran
Si quelqu’un pouvait m’aider car sinon je vais être obligé de remettre ubuntu et ça me saoule !! (mais ca marche au moins)

#2

Si tu est en Sid ou testing essai de supprimer ton fichier /etc/xorg.conf. Puis reboot pour voir s’il existe une différence.

#3

je viens de mettre à jour. En fait c’est l’ecran du portable qui n’est pas detecté car ca fonctionne avec un écran externe.
Même comportement avec ou sans le xorg.conf

#4

Qui c’est qui a généré ce xorg.conf ?
En tout cas tu peux tenter de le mettre de côté et d’en générer un plus simple avec # dpkg-reconfigure xserver-xorg.

#5

c’est xorg qui me l’a généré !!
xrandr me dit que LVDS1 est deconnecté c’est fou ca !!

#6 
Je pense qu'il faut que tu rajoutes une section "monitor" pour ta sortie LVDS1 dans ton xorg.conf, chez moi ça donne ça :
[code]Section "Device"
(...)
	Identifier  "Card0"
	Driver      "intel"
	VendorName  "Intel Corporation"
	BoardName   "Mobile 945GME Express Integrated Graphics Controller"
	BusID       "PCI:0:2:0"
	Option      "monitor-LVDS1" "internal"
	Option      "monitor-VGA1" "external"
EndSection


Section "Monitor"
	Identifier "external"
	Option "PreferredMode" "1440x900"
	Option "above" "internal"
EndSection

Section "Monitor"
	Identifier   "internal"
	Option	     "PreferredMode" "1024x600"
	VendorName   "Monitor Vendor"
	ModelName    "Monitor Model"
EndSection[/code]
À adapter à tes besoins bien sûr.

Je pense qu’il faut que tu rajoutes une section “monitor” pour ta sortie LVDS1 dans ton xorg.conf, chez moi ça donne ça :

[code]Section “Device”
(…)
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GME Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option “monitor-LVDS1” "internal"
Option “monitor-VGA1” "external"
EndSection

Section "Monitor"
Identifier "external"
Option “PreferredMode” "1440x900"
Option “above” "internal"
EndSection

Section "Monitor"
Identifier "internal"
Option “PreferredMode” "1024x600"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection[/code]
À adapter à tes besoins bien sûr.

#7

alors j’ai modifié mais même résultat :

code intel(0): Depth 24, (–) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel® 945GME
(–) intel(0): Chipset: “945GME”
(II) intel(0): Output VGA1 using monitor section external
() intel(0): Option “PreferredMode” “1440x900”
() intel(0): Option “Above” “internal”
(II) intel(0): Output LVDS1 using monitor section internal
(**) intel(0): Option “PreferredMode” “1366x768”
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): EDID for output VGA1
(II) intel(0): EDID for output LVDS1
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 disconnected
(WW) intel(0): No outputs definitely connected, trying again…
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 disconnected
(WW) intel(0): Unable to find initial modes
(EE) intel(0): Cannot position output VGA1 relative to output internal without modes
(==) intel(0): video overlay key set to 0x101fe
(EE) intel(0): No modes.
(II) UnloadModule: “intel”
(EE) Screen(s) found, but none have a usable configuration.

[/code]

xorg.conf:

[code]Section “Device”
### Available Driver options are:-
### Values: : integer, : float, : “True”/“False”,
### : “String”, : " Hz/kHz/MHz"
### [arg]: arg optional
#Option “NoAccel” # []
#Option “SWcursor” # []
#Option “ColorKey” #
#Option “CacheLines” #
#Option “Dac6Bit” # []
#Option “DRI” # []
#Option “NoDDC” # []
#Option “ShowCache” # []
#Option “XvMCSurfaces” #
#Option “PageFlip” # []
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 945GME Express Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option “monitor-LVDS1” "internal"
Option “monitor-VGA1” "external"
EndSection

Section "Monitor"
Identifier "external"
Option “PreferredMode” "1440x900"
Option “above” "internal"
EndSection

Section "Monitor"
Identifier "internal"
Option “PreferredMode” "1366x768"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "internal"
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

[/code]

J’ai mis internal dans Screen mais ca ne change rien même avec la valeur Monitor0

#8

[quote=“leatherface”]alors j’ai modifié mais même résultat :

[code]Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "internal"
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection

[/code]

J’ai mis internal dans Screen mais ca ne change rien même avec la valeur Monitor0[/quote]

Chez moi j’ai ça dans ma section screen, c’est possible qu’il y ait quelques lignes en trop,
mais ça fonctionne comme ça : Section "Screen" Identifier "Screen0" Device "Card0" Monitor "internal" SubSection "Display" # les quatres lignes Depth 24 # que je soupçonne Virtual 1440 900 # d'être EndSubSection # inutiles SubSection "Display" Virtual 1440 1500 EndSubSection EndSectionLes chiffres sont à modifier, tu n’as peut-être pas une résolution virtuelle de 1440x1500, pour la connaître, c’est (largeur de l’écran le plus large)x(addition de la hauteur des deux écrans).
Je n’utilise pas gnome, pour savoir s’il est responsable de ton problème,
lance une session graphique sans lui et vois si ça va mieux.

#9

pas de changement :cry:
Je ne comprends vraiment pas !!
Au niveau hardware pas de souci il marche en console et sur Ubuntu.

#10

Les premières lignes de $ lspci me donnent ça :

00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03) 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)Je pense que j’ai la même carte que toi.
J’utilise les paquets suivants pour mon serveur X$ dpkg -l |grep xorg ii xserver-xorg 1:7.5+3 the X.Org X server ii xserver-xorg-core 2:1.7.4-2 Xorg X server - core server ii xserver-xorg-input-evdev 1:2.3.2-3 X.Org X server -- evdev input driver ii xserver-xorg-input-kbd 1:1.4.0-1 X.Org X server -- keyboard input driver ii xserver-xorg-input-mouse 1:1.5.0-1 X.Org X server -- mouse input driver ii xserver-xorg-input-synaptics 1.2.1-1 Synaptics TouchPad driver for X.Org server ii xserver-xorg-video-intel 2:2.9.1-2 X.Org X server -- Intel i8xx, i9xx display driver c’est à dire les dernières versions de chez Sid, si tes paquets sont plus ancien essaie de les mettre à jour et vois si ça change quelque chose.
Sinon tu as vraiment essayé sans Gnome histoire de voir si c’est pas lui qui foutait la merde?

#11

Je suis en SID déjà.
J’ai tenté de lancer twm et il me dit : cannot open display “”""

#12

après avoir fait une recherche sur le net avec LVDS1 disconnected, je suis tombé sur le post d’un gars qui a un vaio et qui rencontre le même souci que moi.
Visiblement c’est un problème avec le 2.6.32-trunk.
J’ai installé le 2.6.30 et c’est bon. Par contre maintenant plus de réseau je deviens fou.