Bonjour à tous
voilà le soucis.
Après un UPGRADE de mon système lorsque je me connecte sur mon bureau Lxde je n’obtiens plus pour mon user au démarrage default xsessionet j’ai un affichage des plus bizarres .
lorsque j’utilise un terminal root et que je tape la commande startx alors mon affichage redevient normal.
voici quelques petits renseignements sur ma distrib.
j’utilise une debian wheezy 7.8
uname -a
Linux debjo 3.2.0-4-686-pae #1 SMP Debian 3.2.65-1+deb7u2 i686 GNU/Linux
[b]dmesg /var/log/xorg.0.log[/b]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.65-1+deb7u2
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000037f90000 (usable)
[ 0.000000] BIOS-e820: 0000000037f90000 - 0000000037f9e000 (ACPI data)
[ 0.000000] BIOS-e820: 0000000037f9e000 - 0000000037ff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 0000000037ff0000 - 0000000038000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: LENOVO 9142W1N/LENOVO, BIOS 2UKT46AUS 12/26/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x37f90 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FFC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00ff780] ff780
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19f9000-1a00000
[ 0.000000] RAMDISK: 36c88000 - 3763c000
[ 0.000000] ACPI: RSDP 000f9670 00024 (v02 ACPIAM)
[ 0.000000] ACPI: XSDT 37f90100 00064 (v01 LENOVO TC-03 20071226 MSFT 00000097)
[ 0.000000] ACPI: FACP 37f90290 000F4 (v03 LENOVO TC-03 20071226 MSFT 00000097)
[ 0.000000] ACPI: DSDT 37f905b0 04C64 (v01 LNV_P LNV_P501 00000501 INTL 20051117)
[ 0.000000] ACPI: FACS 37f9e000 00040
[ 0.000000] ACPI: APIC 37f90390 0005C (v01 LENOVO TC-03 20071226 MSFT 00000097)
[ 0.000000] ACPI: MCFG 37f903f0 0003C (v01 LENOVO OEMMCFG 20071226 MSFT 00000097)
[ 0.000000] ACPI: 37f90430 00000 (v00 00000000 00000000)
[ 0.000000] ACPI: OEMB 37f9e040 00071 (v01 LENOVO TC-03 20071226 MSFT 00000097)
[ 0.000000] ACPI: HPET 37f95220 00038 (v01 LENOVO OEMHPET 20071226 MSFT 00000097)
[ 0.000000] ACPI: TCPA 37f953c0 00032 (v01 LENOVO TBLOEMID 00000001 MSFT 00000097)
[ 0.000000] ACPI: SSDT 37f95400 000F4 (v01 A M I POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 5MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x00037f90
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00037f90
[ 0.000000] On node 0 totalpages: 229151
[ 0.000000] free_area_init_node: node 0, pgdat c1414800, node_mem_map f6588200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 12 pages used for memmap
[ 0.000000] HighMem zone: 1414 pages, LIFO batch:0
[ 0.000000] Using APIC driver default
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 38000000 (gap: 38000000:c7f00000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f79db000 s33280 r0 d24064 u57344
[ 0.000000] pcpu-alloc: s33280 r0 d24064 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 227359
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-686-pae root=UUID=0c572e00-9c3f-42b6-b54e-9f5619478f8a ro single initrd=/install/initrd.gz
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:00037f90)
[ 0.000000] Memory: 893320k/917056k available (2860k kernel code, 23284k reserved, 1348k data, 420k init, 5704k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141d000 - 0xc1486000 ( 420 kB)
[ 0.000000] .data : 0xc12cb040 - 0xc141c200 (1348 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12cb040 (2860 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f6006000 soft=f6008000
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 1999.788 MHz processor.
[ 0.000000] Marking TSC unstable due to TSCs unsynchronized
[ 0.020045] Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.57 BogoMIPS (lpj=7999152)
[ 0.020128] pid_max: default: 32768 minimum: 301
[ 0.020213] Security Framework initialized
[ 0.020257] AppArmor: AppArmor disabled by boot time parameter
[ 0.020315] Mount-cache hash table entries: 512
[ 0.020488] Initializing cgroup subsys cpuacct
[ 0.020533] Initializing cgroup subsys memory
[ 0.020581] Initializing cgroup subsys devices
[ 0.020622] Initializing cgroup subsys freezer
[ 0.020663] Initializing cgroup subsys net_cls
[ 0.020704] Initializing cgroup subsys blkio
[ 0.020750] Initializing cgroup subsys perf_event
[ 0.020820] mce: CPU supports 5 MCE banks
[ 0.020870] using AMD E400 aware idle routine
[ 0.020977] SMP alternatives: switching to UP code
[ 0.026491] ACPI: Core revision 20110623
[ 0.029918] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.030331] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070416] CPU0: AMD Sempron(tm) Processor LE-1150 stepping 01
[ 0.072003] Performance Events: AMD PMU driver.
[ 0.072003] ... version: 0
[ 0.072003] ... bit width: 48
[ 0.072003] ... generic registers: 4
[ 0.072003] ... value mask: 0000ffffffffffff
[ 0.072003] ... max period: 00007fffffffffff
[ 0.072003] ... fixed-purpose events: 0
[ 0.072003] ... event mask: 000000000000000f
[ 0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072003] Brought up 1 CPUs
[ 0.072003] Total of 1 processors activated (3999.57 BogoMIPS).
[ 0.072003] devtmpfs: initialized
[ 0.072003] PM: Registering ACPI NVS region at 37f9e000 (335872 bytes)
[ 0.072003] print_constraints: dummy:
[ 0.072003] NET: Registered protocol family 16
[ 0.072003] node 0 link 0: io port [1000, ffffff]
[ 0.072003] TOM: 0000000040000000 aka 1024M
[ 0.072003] node 0 link 0: mmio [f0000000, f7feffff]
[ 0.072003] node 0 link 0: mmio [e0000000, efffffff]
[ 0.072003] node 0 link 0: mmio [40000000, dfffffff]
[ 0.072003] node 0 link 0: mmio [a0000, bffff]
[ 0.072003] node 0 link 0: mmio [f7ff0000, ffffffff]
[ 0.072003] bus: [00, ff] on node 0 link 0
[ 0.072003] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.072003] bus: 00 index 1 [mem 0x40000000-0xfcffffffff]
[ 0.072003] bus: 00 index 2 [mem 0x000a0000-0x000bffff]
[ 0.072003] ACPI: bus type pci registered
[ 0.072003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.072003] PCI: not using MMCONFIG
[ 0.072003] PCI : PCI BIOS aera is rw and x. Use pci=nobios if you want it NX.
[ 0.072003] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=3
[ 0.072003] PCI: Using configuration type 1 for base access
[ 0.072003] bio: create slab <bio-0> at 0
[ 0.072003] ACPI: Added _OSI(Module Device)
[ 0.072003] ACPI: Added _OSI(Processor Device)
[ 0.072003] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.072015] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.072945] ACPI: EC: Look up EC in DSDT
[ 0.074200] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.076774] ACPI: Interpreter enabled
[ 0.076820] ACPI: (supports S0 S3 S4 S5)
[ 0.077013] ACPI: Using IOAPIC for interrupt routing
[ 0.077079] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.078370] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.078418] PCI: Using MMCONFIG for extended config space
[ 0.084241] ACPI: No dock devices found.
[ 0.084288] HEST: Table not found.
[ 0.084332] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.084482] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.084726] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.084730] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.084734] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.084737] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.084740] pci_root PNP0A03:00: host bridge window [mem 0x38000000-0xdfffffff] (ignored)
[ 0.084744] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfed44fff] (ignored)
[ 0.084758] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600
[ 0.084796] pci 0000:00:01.0: [1002:7912] type 1 class 0x000604
[ 0.084853] pci 0000:00:07.0: [1002:7917] type 1 class 0x000604
[ 0.084900] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.084940] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101
[ 0.084962] pci 0000:00:12.0: reg 10: [io 0xb000-0xb007]
[ 0.084974] pci 0000:00:12.0: reg 14: [io 0xa000-0xa003]
[ 0.084987] pci 0000:00:12.0: reg 18: [io 0x9000-0x9007]
[ 0.084999] pci 0000:00:12.0: reg 1c: [io 0x8000-0x8003]
[ 0.085011] pci 0000:00:12.0: reg 20: [io 0x7000-0x700f]
[ 0.085024] pci 0000:00:12.0: reg 24: [mem 0xfe7ff800-0xfe7ffbff]
[ 0.085049] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.085135] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[ 0.085152] pci 0000:00:13.0: reg 10: [mem 0xfe7fe000-0xfe7fefff]
[ 0.085234] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[ 0.085251] pci 0000:00:13.1: reg 10: [mem 0xfe7fd000-0xfe7fdfff]
[ 0.085333] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[ 0.085350] pci 0000:00:13.2: reg 10: [mem 0xfe7fc000-0xfe7fcfff]
[ 0.085432] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[ 0.085449] pci 0000:00:13.3: reg 10: [mem 0xfe7fb000-0xfe7fbfff]
[ 0.085531] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[ 0.085548] pci 0000:00:13.4: reg 10: [mem 0xfe7fa000-0xfe7fafff]
[ 0.085636] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[ 0.085660] pci 0000:00:13.5: reg 10: [mem 0xfe7ff000-0xfe7ff0ff]
[ 0.085763] pci 0000:00:13.5: supports D1 D2
[ 0.085765] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.086221] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.087924] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
[ 0.100021] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[ 0.100038] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.100050] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.100062] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.100075] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.100087] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f]
[ 0.100136] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.100163] pci 0000:00:14.2: reg 10: [mem 0xfe7f4000-0xfe7f7fff 64bit]
[ 0.100246] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.100266] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[ 0.100359] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.100418] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
[ 0.100451] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
[ 0.100474] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
[ 0.100499] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
[ 0.100531] PCI: peer root bus 00 res updated from pci conf
[ 0.100565] pci 0000:01:05.0: [1002:791e] type 0 class 0x000300
[ 0.100579] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.100588] pci 0000:01:05.0: reg 18: [mem 0xfe9f0000-0xfe9fffff 64bit]
[ 0.100595] pci 0000:01:05.0: reg 20: [io 0xc000-0xc0ff]
[ 0.100602] pci 0000:01:05.0: reg 24: [mem 0xfe800000-0xfe8fffff]
[ 0.100626] pci 0000:01:05.0: supports D1 D2
[ 0.100648] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.100692] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.100696] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.100701] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.100753] pci 0000:02:00.0: [11ab:436b] type 0 class 0x000200
[ 0.100775] pci 0000:02:00.0: reg 10: [mem 0xfeafc000-0xfeafffff 64bit]
[ 0.100787] pci 0000:02:00.0: reg 18: [io 0xd800-0xd8ff]
[ 0.100826] pci 0000:02:00.0: reg 30: [mem 0xfeac0000-0xfeadffff pref]
[ 0.100886] pci 0000:02:00.0: supports D1 D2
[ 0.100888] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.108023] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 0.108068] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.108072] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.108110] pci 0000:03:02.0: [14f1:2f20] type 0 class 0x000780
[ 0.108136] pci 0000:03:02.0: reg 10: [mem 0xfebf0000-0xfebfffff]
[ 0.108151] pci 0000:03:02.0: reg 14: [io 0xe800-0xe807]
[ 0.108253] pci 0000:03:02.0: PME# supported from D3hot D3cold
[ 0.108319] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.108365] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.108371] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.108377] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.108380] pci 0000:00:14.4: bridge window [mem 0x40000000-0xfcffffffff] (subtractive decode)
[ 0.108384] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.108399] pci_bus 0000:00: on NUMA node 0
[ 0.108403] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.108559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.108607] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.108664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
[ 0.108743] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.108786] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.108832] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.113797] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 0.114254] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15)
[ 0.114705] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.115156] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 0.115606] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.116125] ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
[ 0.116374] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 0.116823] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 0.117446] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.117495] vgaarb: loaded
[ 0.117534] vgaarb: bridge control possible 0000:01:05.0
[ 0.117628] PCI: Using ACPI for IRQ routing
[ 0.117671] PCI: pci_cache_line_size set to 64 bytes
[ 0.118602] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.118605] reserve RAM buffer: 0000000037f90000 - 0000000037ffffff
[ 0.118750] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.118960] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.121051] Switching to clocksource hpet
[ 0.122844] pnp: PnP ACPI init
[ 0.122907] ACPI: bus type pnp registered
[ 0.123097] pnp 00:00: [bus 00-ff]
[ 0.123100] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.123103] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.123106] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.123109] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.123112] pnp 00:00: [mem 0x000d0000-0x000dffff window]
[ 0.123115] pnp 00:00: [mem 0x38000000-0xdfffffff window]
[ 0.123118] pnp 00:00: [mem 0xf0000000-0xfed44fff window]
[ 0.123185] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.123243] pnp 00:01: [mem 0x38000000-0x3fffffff]
[ 0.123303] system 00:01: [mem 0x38000000-0x3fffffff] has been reserved
[ 0.123347] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.123389] pnp 00:02: [dma 4]
[ 0.123392] pnp 00:02: [io 0x0000-0x000f]
[ 0.123395] pnp 00:02: [io 0x0081-0x0083]
[ 0.123397] pnp 00:02: [io 0x0087]
[ 0.123400] pnp 00:02: [io 0x0089-0x008b]
[ 0.123402] pnp 00:02: [io 0x008f]
[ 0.123404] pnp 00:02: [io 0x00c0-0x00df]
[ 0.123438] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.123450] pnp 00:03: [io 0x0070-0x0071]
[ 0.123463] pnp 00:03: [irq 8]
[ 0.123495] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.123505] pnp 00:04: [io 0x0061]
[ 0.123538] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.123548] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.123553] pnp 00:05: [irq 13]
[ 0.123586] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.123847] pnp 00:06: [io 0x03f8-0x03ff]
[ 0.123852] pnp 00:06: [irq 4]
[ 0.123855] pnp 00:06: [dma 0 disabled]
[ 0.123939] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.123939] pnp 00:07: [io 0x0378-0x037f]
[ 0.123939] pnp 00:07: [irq 7]
[ 0.123939] pnp 00:07: [dma 0 disabled]
[ 0.123939] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.123939] pnp 00:08: [mem 0xfed00000-0xfed003ff]
[ 0.123939] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.123939] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.123939] pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
[ 0.123939] pnp 00:09: [mem 0xfec00000-0xfec00fff]
[ 0.123939] pnp 00:09: [mem 0xfee00000-0xfee00fff]
[ 0.123939] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.123939] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.126899] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.127015] pnp 00:0a: [io 0x0010-0x001f]
[ 0.127017] pnp 00:0a: [io 0x0022-0x003f]
[ 0.127020] pnp 00:0a: [io 0x0062-0x0063]
[ 0.127023] pnp 00:0a: [io 0x0065-0x006f]
[ 0.127025] pnp 00:0a: [io 0x0072-0x007f]
[ 0.127028] pnp 00:0a: [io 0x0080]
[ 0.127030] pnp 00:0a: [io 0x0084-0x0086]
[ 0.127033] pnp 00:0a: [io 0x0088]
[ 0.127035] pnp 00:0a: [io 0x008c-0x008e]
[ 0.127038] pnp 00:0a: [io 0x0090-0x009f]
[ 0.127040] pnp 00:0a: [io 0x00a2-0x00bf]
[ 0.127042] pnp 00:0a: [io 0x00b1]
[ 0.127045] pnp 00:0a: [io 0x00e0-0x00ef]
[ 0.127048] pnp 00:0a: [io 0x04d0-0x04d1]
[ 0.127050] pnp 00:0a: [io 0x040b]
[ 0.127052] pnp 00:0a: [io 0x04d6]
[ 0.127055] pnp 00:0a: [io 0x0c00-0x0c01]
[ 0.127057] pnp 00:0a: [io 0x0c14]
[ 0.127060] pnp 00:0a: [io 0x0c50-0x0c51]
[ 0.127062] pnp 00:0a: [io 0x0c52]
[ 0.127064] pnp 00:0a: [io 0x0c6c]
[ 0.127067] pnp 00:0a: [io 0x0c6f]
[ 0.127069] pnp 00:0a: [io 0x0cd0-0x0cd1]
[ 0.127072] pnp 00:0a: [io 0x0cd2-0x0cd3]
[ 0.127074] pnp 00:0a: [io 0x0cd4-0x0cd5]
[ 0.127077] pnp 00:0a: [io 0x0cd6-0x0cd7]
[ 0.127079] pnp 00:0a: [io 0x0cd8-0x0cdf]
[ 0.127082] pnp 00:0a: [io 0x0800-0x089f]
[ 0.127084] pnp 00:0a: [io 0x0b10-0x0b1f]
[ 0.127087] pnp 00:0a: [io 0x0000-0xffffffffffffffff disabled]
[ 0.127090] pnp 00:0a: [io 0x0900-0x090f]
[ 0.127092] pnp 00:0a: [io 0x0910-0x091f]
[ 0.127096] pnp 00:0a: [io 0xfe00-0xfefe]
[ 0.127099] pnp 00:0a: [mem 0xffb80000-0xffbfffff]
[ 0.127102] pnp 00:0a: [mem 0xfff00000-0xffffffff]
[ 0.127201] system 00:0a: [io 0x04d0-0x04d1] has been reserved
[ 0.127245] system 00:0a: [io 0x040b] has been reserved
[ 0.127286] system 00:0a: [io 0x04d6] has been reserved
[ 0.127328] system 00:0a: [io 0x0c00-0x0c01] has been reserved
[ 0.127371] system 00:0a: [io 0x0c14] has been reserved
[ 0.127412] system 00:0a: [io 0x0c50-0x0c51] has been reserved
[ 0.127454] system 00:0a: [io 0x0c52] has been reserved
[ 0.127497] system 00:0a: [io 0x0c6c] has been reserved
[ 0.127539] system 00:0a: [io 0x0c6f] has been reserved
[ 0.127581] system 00:0a: [io 0x0cd0-0x0cd1] has been reserved
[ 0.127623] system 00:0a: [io 0x0cd2-0x0cd3] has been reserved
[ 0.127666] system 00:0a: [io 0x0cd4-0x0cd5] has been reserved
[ 0.127708] system 00:0a: [io 0x0cd6-0x0cd7] has been reserved
[ 0.127750] system 00:0a: [io 0x0cd8-0x0cdf] has been reserved
[ 0.127792] system 00:0a: [io 0x0800-0x089f] has been reserved
[ 0.127835] system 00:0a: [io 0x0b10-0x0b1f] has been reserved
[ 0.127878] system 00:0a: [io 0x0900-0x090f] has been reserved
[ 0.127920] system 00:0a: [io 0x0910-0x091f] has been reserved
[ 0.127962] system 00:0a: [io 0xfe00-0xfefe] has been reserved
[ 0.128017] system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved
[ 0.128060] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.128104] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.128135] pnp 00:0b: [io 0x0060]
[ 0.128138] pnp 00:0b: [io 0x0064]
[ 0.128143] pnp 00:0b: [irq 1]
[ 0.128188] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.128237] pnp 00:0c: [irq 12]
[ 0.128281] pnp 00:0c: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)
[ 0.128377] pnp 00:0d: [io 0x0000-0xffffffffffffffff disabled]
[ 0.128381] pnp 00:0d: [io 0x0a00-0x0a0f]
[ 0.128383] pnp 00:0d: [io 0x0220-0x022f]
[ 0.128438] system 00:0d: [io 0x0a00-0x0a0f] has been reserved
[ 0.128480] system 00:0d: [io 0x0220-0x022f] has been reserved
[ 0.128524] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.128550] pnp 00:0e: [mem 0xfed40000-0xfed44fff]
[ 0.128553] pnp 00:0e: IRQ 10 override to edge, high
[ 0.128597] pnp 00:0e: [irq 10]
[ 0.128600] pnp 00:0e: IRQ 11 override to edge, high
[ 0.128643] pnp 00:0e: [irq 11]
[ 0.128646] pnp 00:0e: IRQ 13 override to edge, high
[ 0.128687] pnp 00:0e: [irq 13]
[ 0.128724] pnp 00:0e: Plug and Play ACPI device, IDs WEC1000 PNP0c31 (active)
[ 0.128761] pnp 00:0f: [mem 0xe0000000-0xefffffff]
[ 0.128813] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.128857] system 00:0f: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.129055] pnp 00:10: [mem 0x00000000-0x0009ffff]
[ 0.129058] pnp 00:10: [mem 0x000c0000-0x000cffff]
[ 0.129061] pnp 00:10: [mem 0x000e0000-0x000fffff]
[ 0.129064] pnp 00:10: [mem 0x00100000-0x37ffffff]
[ 0.129066] pnp 00:10: [mem 0xfed45000-0xffffffff]
[ 0.129130] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.129173] system 00:10: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.129217] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.129260] system 00:10: [mem 0x00100000-0x37ffffff] could not be reserved
[ 0.129303] system 00:10: [mem 0xfed45000-0xffffffff] could not be reserved
[ 0.129346] system 00:10: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.129459] pnp: PnP ACPI: found 17 devices
[ 0.129500] ACPI: ACPI bus type pnp unregistered
[ 0.129542] PnPBIOS: Disabled by ACPI PNP
[ 0.166281] PCI: max bus depth: 1 pci_try_num: 2
[ 0.166313] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.166358] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff]
[ 0.166401] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff]
[ 0.166445] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.166493] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 0.166535] pci 0000:00:07.0: bridge window [io 0xd000-0xdfff]
[ 0.166578] pci 0000:00:07.0: bridge window [mem 0xfea00000-0xfeafffff]
[ 0.166623] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.166665] pci 0000:00:14.4: bridge window [io 0xe000-0xefff]
[ 0.166711] pci 0000:00:14.4: bridge window [mem 0xfeb00000-0xfebfffff]
[ 0.166774] pci 0000:00:07.0: setting latency timer to 64
[ 0.166785] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.166788] pci_bus 0000:00: resource 5 [mem 0x40000000-0xfcffffffff]
[ 0.166791] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.166795] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]
[ 0.166798] pci_bus 0000:01: resource 1 [mem 0xfe800000-0xfe9fffff]
[ 0.166801] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 0.166805] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.166808] pci_bus 0000:02: resource 1 [mem 0xfea00000-0xfeafffff]
[ 0.166811] pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
[ 0.166814] pci_bus 0000:03: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 0.166817] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.166820] pci_bus 0000:03: resource 5 [mem 0x40000000-0xfcffffffff]
[ 0.166823] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.166894] NET: Registered protocol family 2
[ 0.169498] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.169867] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.170639] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.171052] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.171096] TCP reno registered
[ 0.171138] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.171191] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.171338] NET: Registered protocol family 1
[ 0.644078] pci 0000:01:05.0: Boot video device
[ 0.644087] PCI: CLS 64 bytes, default 64
[ 0.644162] Unpacking initramfs...
[ 0.959414] Freeing initrd memory: 9936k freed
[ 0.967112] audit: initializing netlink socket (disabled)
[ 0.967171] type=2000 audit(1426273571.960:1): initialized
[ 0.984243] highmem bounce pool size: 64 pages
[ 0.984290] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.984976] VFS: Disk quotas dquot_6.5.2
[ 0.985050] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.985162] msgmni has been set to 1753
[ 0.985374] alg: No test for stdrng (krng)
[ 0.985443] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.985490] io scheduler noop registered
[ 0.985530] io scheduler deadline registered
[ 0.985577] io scheduler cfq registered (default)
[ 0.985719] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.985757] pcieport 0000:00:07.0: irq 40 for MSI/MSI-X
[ 0.985851] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.985916] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.985958] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.986330] ERST: Table is not found!
[ 0.986371] GHES: HEST is not enabled!
[ 0.986423] isapnp: Scanning for PnP cards...
[ 1.340313] isapnp: No Plug & Play device found
[ 1.340431] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.360992] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.381822] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.382230] Linux agpgart interface v0.103
[ 1.383108] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.385836] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.385882] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.386075] mousedev: PS/2 mouse device common for all mice
[ 1.386167] rtc_cmos 00:03: RTC can wake from S4
[ 1.386324] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.386393] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 1.386449] cpuidle: using governor ladder
[ 1.386490] cpuidle: using governor menu
[ 1.386801] TCP cubic registered
[ 1.386865] NET: Registered protocol family 10
[ 1.387508] Mobile IPv6
[ 1.387549] NET: Registered protocol family 17
[ 1.387591] Registering the dns_resolver key type
[ 1.387658] Using IPI No-Shortcut mode
[ 1.387809] PM: Hibernation image not present or could not be loaded.
[ 1.387825] registered taskstats version 1
[ 1.388711] rtc_cmos 00:03: setting system clock to 2015-03-13 19:06:13 UTC (1426273573)
[ 1.388802] Initializing network drop monitor service
[ 1.388995] Freeing unused kernel memory: 420k freed
[ 1.389396] Write protecting the kernel text: 2864k
[ 1.389476] Write protecting the kernel read-only data: 1084k
[ 1.389520] NX-protecting the kernel data: 3280k
[ 1.408244] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.408578] udevd[44]: starting version 175
[ 1.522380] SCSI subsystem initialized
[ 1.560270] usbcore: registered new interface driver usbfs
[ 1.560347] usbcore: registered new interface driver hub
[ 1.571644] usbcore: registered new device driver usb
[ 1.572406] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.572513] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.572591] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.572667] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.572726] ehci_hcd 0000:00:13.5: debug port 1
[ 1.572794] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe7ff000
[ 1.574942] sky2: driver version 1.30
[ 1.575048] sky2 0000:02:00.0: setting latency timer to 64
[ 1.575085] sky2 0000:02:00.0: Yukon-2 Extreme chip revision 2
[ 1.575222] sky2 0000:02:00.0: irq 41 for MSI/MSI-X
[ 1.575908] sky2 0000:02:00.0: eth0: addr 00:1d:92:d1:26:34
[ 1.584071] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.584189] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.584232] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.584279] usb usb1: Product: EHCI Host Controller
[ 1.584320] usb usb1: Manufacturer: Linux 3.2.0-4-686-pae ehci_hcd
[ 1.584361] usb usb1: SerialNumber: 0000:00:13.5
[ 1.584558] hub 1-0:1.0: USB hub found
[ 1.584603] hub 1-0:1.0: 10 ports detected
[ 1.586745] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.586853] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.586910] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.586994] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe7fe000
[ 1.591356] libata version 3.00 loaded.
[ 1.647061] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.647111] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.647157] usb usb2: Product: OHCI Host Controller
[ 1.647198] usb usb2: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 1.647240] usb usb2: SerialNumber: 0000:00:13.0
[ 1.648378] hub 2-0:1.0: USB hub found
[ 1.648431] hub 2-0:1.0: 2 ports detected
[ 1.648557] ahci 0000:00:12.0: version 3.0
[ 1.648626] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
[ 1.648779] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.648828] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc
[ 1.652728] scsi0 : ahci
[ 1.659240] scsi1 : ahci
[ 1.664325] scsi2 : ahci
[ 1.669171] scsi3 : ahci
[ 1.669392] ata1: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff900 irq 22
[ 1.669441] ata2: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff980 irq 22
[ 1.669489] ata3: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa00 irq 22
[ 1.669536] ata4: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa80 irq 22
[ 1.669730] pata_atiixp 0000:00:14.1: setting latency timer to 64
[ 1.673946] scsi4 : pata_atiixp
[ 1.677992] scsi5 : pata_atiixp
[ 1.678783] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[ 1.678828] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
[ 1.678952] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.679010] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.679091] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe7fd000
[ 1.736051] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.736100] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.736146] usb usb3: Product: OHCI Host Controller
[ 1.736187] usb usb3: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 1.736229] usb usb3: SerialNumber: 0000:00:13.1
[ 1.736576] hub 3-0:1.0: USB hub found
[ 1.736625] hub 3-0:1.0: 2 ports detected
[ 1.739773] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.739824] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.739908] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe7fc000
[ 1.796029] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.796073] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.796119] usb usb4: Product: OHCI Host Controller
[ 1.796159] usb usb4: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 1.796202] usb usb4: SerialNumber: 0000:00:13.2
[ 1.797468] hub 4-0:1.0: USB hub found
[ 1.797526] hub 4-0:1.0: 2 ports detected
[ 1.797690] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.797740] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.797810] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe7fb000
[ 1.856638] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.856687] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.856733] usb usb5: Product: OHCI Host Controller
[ 1.856774] usb usb5: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 1.856816] usb usb5: SerialNumber: 0000:00:13.3
[ 1.858053] hub 5-0:1.0: USB hub found
[ 1.858139] ata5.00: ATA-7: Maxtor 6L080L0, BAJ41G20, max UDMA/133
[ 1.858182] ata5.00: 160086528 sectors, multi 16: LBA
[ 1.858388] hub 5-0:1.0: 2 ports detected
[ 1.858555] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.858605] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.858671] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe7fa000
[ 1.873995] ata5.00: configured for UDMA/100
[ 1.896038] usb 1-4: new high-speed USB device number 2 using ehci_hcd
[ 1.916042] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.916085] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.916131] usb usb6: Product: OHCI Host Controller
[ 1.916171] usb usb6: Manufacturer: Linux 3.2.0-4-686-pae ohci_hcd
[ 1.916213] usb usb6: SerialNumber: 0000:00:13.4
[ 1.917442] hub 6-0:1.0: USB hub found
[ 1.917499] hub 6-0:1.0: 2 ports detected
[ 1.992035] ata1: SATA link down (SStatus 0 SControl 300)
[ 2.000035] ata2: SATA link down (SStatus 0 SControl 300)
[ 2.012031] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.032171] usb 1-4: New USB device found, idVendor=13fe, idProduct=3623
[ 2.032215] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.032257] usb 1-4: Product: STORE N GO
[ 2.032297] usb 1-4: Manufacturer: Verbatim
[ 2.032338] usb 1-4: SerialNumber: 079A1211F88AAA77
[ 2.036669] Initializing USB Mass Storage driver...
[ 2.036850] scsi6 : usb-storage 1-4:1.0
[ 2.036990] usbcore: registered new interface driver usb-storage
[ 2.037031] USB Mass Storage support registered.
[ 2.144023] usb 1-5: new high-speed USB device number 3 using ehci_hcd
[ 2.176023] ata3: softreset failed (device not ready)
[ 2.176065] ata3: applying PMP SRST workaround and retrying
[ 2.279201] usb 1-5: New USB device found, idVendor=13fe, idProduct=4100
[ 2.279244] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.279286] usb 1-5: Product: USB DISK 2.0
[ 2.279328] usb 1-5: Manufacturer:
[ 2.279368] usb 1-5: SerialNumber: 070228F8AFD3A425
[ 2.280107] scsi7 : usb-storage 1-5:1.0
[ 2.348039] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.357505] ata3.00: ATAPI: ATAPI DVD C DH48C2S, NL31, max UDMA/100
[ 2.357549] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.367338] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.367381] ata3.00: configured for UDMA/100
[ 2.369262] scsi 2:0:0:0: CD-ROM ATAPI DVD C DH48C2S NL31 PQ: 0 ANSI: 5
[ 2.369714] scsi 4:0:0:0: Direct-Access ATA Maxtor 6L080L0 BAJ4 PQ: 0 ANSI: 5
[ 2.389720] sd 4:0:0:0: [sda] 160086528 512-byte logical blocks: (81.9 GB/76.3 GiB)
[ 2.389820] sd 4:0:0:0: [sda] Write Protect is off
[ 2.389863] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.389885] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.392046] usb 1-6: new high-speed USB device number 4 using ehci_hcd
[ 2.394143] sr0: scsi3-mmc drive: 0x/48x writer cd/rw xa/form2 cdda tray
[ 2.394187] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.394796] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.424408] sda: sda1 sda2 < sda5 > sda3
[ 2.425008] sd 4:0:0:0: [sda] Attached SCSI disk
[ 2.432457] sr 2:0:0:0: Attached scsi generic sg0 type 5
[ 2.432633] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 2.531990] usb 1-6: New USB device found, idVendor=18a5, idProduct=0237
[ 2.532062] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.532105] usb 1-6: Product: Portable USB 3.0 Drive
[ 2.532146] usb 1-6: Manufacturer: Verbatim
[ 2.532187] usb 1-6: SerialNumber: 1304240000003472
[ 2.532964] scsi8 : usb-storage 1-6:1.0
[ 2.820093] PM: Starting manual resume from disk
[ 2.820143] PM: Hibernation image partition 8:5 present
[ 2.820146] PM: Looking for hibernation image.
[ 2.832584] PM: Image not found (code -22)
[ 2.832587] PM: Hibernation image not present or could not be loaded.
[ 2.885069] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.037205] scsi 6:0:0:0: Direct-Access Verbatim STORE N GO 5.00 PQ: 0 ANSI: 0 CCS
[ 3.037862] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3.038561] sd 6:0:0:0: [sdb] 7815168 512-byte logical blocks: (4.00 GB/3.72 GiB)
[ 3.039054] sd 6:0:0:0: [sdb] Write Protect is off
[ 3.039096] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 3.039554] sd 6:0:0:0: [sdb] No Caching mode page found
[ 3.039595] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3.042678] sd 6:0:0:0: [sdb] No Caching mode page found
[ 3.042721] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3.043828] sdb: sdb1
[ 3.046055] sd 6:0:0:0: [sdb] No Caching mode page found
[ 3.046098] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 3.046140] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.281861] scsi 7:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
[ 3.282480] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 3.283216] sd 7:0:0:0: [sdc] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB)
[ 3.283711] sd 7:0:0:0: [sdc] Write Protect is off
[ 3.283754] sd 7:0:0:0: [sdc] Mode Sense: 23 00 00 00
[ 3.284212] sd 7:0:0:0: [sdc] No Caching mode page found
[ 3.284255] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 3.287212] sd 7:0:0:0: [sdc] No Caching mode page found
[ 3.287257] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 3.288488] sdc: sdc1
[ 3.290588] sd 7:0:0:0: [sdc] No Caching mode page found
[ 3.290631] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 3.290673] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 3.533017] scsi 8:0:0:0: Direct-Access TOSHIBA MQ01ABD100 AX00 PQ: 0 ANSI: 2
[ 3.533644] sd 8:0:0:0: Attached scsi generic sg4 type 0
[ 3.537500] sd 8:0:0:0: [sdd] 1953525164 512-byte logical blocks: (1.00 TB/931 GiB)
[ 3.538120] sd 8:0:0:0: [sdd] Write Protect is off
[ 3.538163] sd 8:0:0:0: [sdd] Mode Sense: 00 06 00 00
[ 3.538746] sd 8:0:0:0: [sdd] No Caching mode page found
[ 3.538789] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 3.544132] sd 8:0:0:0: [sdd] No Caching mode page found
[ 3.544176] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 4.907348] udevd[345]: starting version 175
[ 5.417073] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 5.417133] ACPI: Power Button [PWRB]
[ 5.417252] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 5.417301] ACPI: Power Button [PWRF]
[ 5.586550] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.742739] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 5.876983] ACPI: duty_cycle spans bit 4
[ 6.206708] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 6.649701] sdd: sdd1
[ 7.708591] sd 8:0:0:0: [sdd] No Caching mode page found
[ 7.708640] sd 8:0:0:0: [sdd] Assuming drive cache: write through
[ 7.708684] sd 8:0:0:0: [sdd] Attached SCSI disk
[ 7.776541] tpm_tis 00:0e: 1.2 TPM (device-id 0xFE, rev-id 70)
[ 7.821988] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 7.843259] [drm] Initialized drm 1.1.0 20060810
[ 7.847995] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 7.848175] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 7.882886] powernow-k8: Found 1 AMD Sempron(tm) Processor LE-1150 (1 cpu cores) (version 2.20.00)
[ 7.882995] powernow-k8: fid 0xc (2000 MHz), vid 0xa
[ 7.883036] powernow-k8: fid 0xa (1800 MHz), vid 0xc
[ 7.883077] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
[ 7.997481] [drm] radeon kernel modesetting enabled.
[ 7.998513] [drm] initializing kernel modesetting (RS690 0x1002:0x791E 0x17AA:0x3030).
[ 7.998615] [drm] register mmio base: 0xFE9F0000
[ 7.998666] [drm] register mmio size: 65536
[ 8.007125] ATOM BIOS: ATI
[ 8.007238] radeon 0000:01:05.0: VRAM: 128M 0x0000000038000000 - 0x000000003FFFFFFF (128M used)
[ 8.007302] radeon 0000:01:05.0: GTT: 512M 0x0000000040000000 - 0x000000005FFFFFFF
[ 8.007677] [drm] Detected VRAM RAM=128M, BAR=128M
[ 8.011007] [drm] RAM width 128bits DDR
[ 8.015109] hda_codec: ALC888: BIOS auto-probing.
[ 8.020180] [TTM] Zone kernel: Available graphics memory: 448986 kiB
[ 8.020239] [TTM] Zone highmem: Available graphics memory: 451838 kiB
[ 8.020291] [TTM] Initializing pool allocator
[ 8.020358] [TTM] Initializing DMA pool allocator
[ 8.020474] [drm] radeon: 128M of VRAM memory ready
[ 8.020524] [drm] radeon: 512M of GTT memory ready.
[ 8.020620] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 8.039727] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input4
[ 8.052580] [drm] radeon: ib pool ready.
[ 8.053757] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
[ 8.064133] [drm] PCIE GART of 512M enabled (table at 0x0000000034D80000).
[ 8.068467] radeon 0000:01:05.0: WB enabled
[ 8.068531] [drm] fence driver on ring 0 use gpu addr 0x40000000 and cpu addr 0xf4d2d000
[ 8.068593] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.068646] [drm] Driver supports precise vblank timestamp query.
[ 8.068760] radeon 0000:01:05.0: irq 42 for MSI/MSI-X
[ 8.068790] radeon 0000:01:05.0: radeon: using MSI.
[ 8.068886] [drm] radeon: irq initialized.
[ 8.070976] [drm] Loading RS690/RS740 Microcode
[ 8.137466] platform radeon_cp.0: firmware: agent aborted loading radeon/RS690_cp.bin (not found?)
[ 8.137913] [drm:r100_cp_init] *ERROR* Failed to load firmware!
[ 8.137971] radeon 0000:01:05.0: failed initializing CP (-2).
[ 8.138023] radeon 0000:01:05.0: Disabling GPU acceleration
[ 8.138076] [drm] radeon: cp finalized
[ 8.138168] radeon 0000:01:05.0: f44fae00 unpin not necessary
[ 8.141362] [drm] Radeon Display Connectors
[ 8.141423] [drm] Connector 0:
[ 8.141470] [drm] VGA
[ 8.141519] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c
[ 8.141574] [drm] Encoders:
[ 8.141621] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 8.141670] [drm] Connector 1:
[ 8.141717] [drm] DVI-D
[ 8.141765] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
[ 8.141821] [drm] Encoders:
[ 8.141868] [drm] DFP3: INTERNAL_LVTM1
[ 8.238013] [drm] fb mappable at 0xF0040000
[ 8.238073] [drm] vram apper at 0xF0000000
[ 8.238122] [drm] size 3145728
[ 8.238169] [drm] fb depth is 24
[ 8.238217] [drm] pitch is 4096
[ 8.238643] fbcon: radeondrmfb (fb0) is primary device
[ 8.268349] Console: switching to colour frame buffer device 128x48
[ 8.279340] fb0: radeondrmfb frame buffer device
[ 8.279442] drm: registered panic notifier
[ 8.279901] [drm] Initialized radeon 2.16.0 20080528 for 0000:01:05.0 on minor 0
[ 8.737815] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 9.792050] tpm_tis 00:0e: Detected an iTPM.
[ 10.296039] tpm_tis 00:0e: Intel iTPM workaround enabled
[ 66.467955] parport_pc 00:07: reported by Plug and Play ACPI
[ 66.468203] parport0: PC-style at 0x378, irq 7 [PCSPP]
[ 67.621325] Adding 1632252k swap on /dev/sda5. Priority:-1 extents:1 across:1632252k
[ 67.648557] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 68.124002] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 68.275236] loop: module loaded
[ 69.486763] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 71.002899] sky2 0000:02:00.0: eth0: enabling interface
[ 71.008865] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 71.073499] RPC: Registered named UNIX socket transport module.
[ 71.079066] RPC: Registered udp transport module.
[ 71.084376] RPC: Registered tcp transport module.
[ 71.089633] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 71.152089] FS-Cache: Loaded
[ 71.241405] FS-Cache: Netfs 'nfs' registered for caching
[ 71.269953] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 72.668629] sky2 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 72.669176] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 82.912018] eth0: no IPv6 routers present
[ 121.113477] lxpolkit[2714]: segfault at 8 ip 08049a91 sp bfb42e40 error 4 in lxpolkit[8048000+3000]
[ 126.888286] fuse init (API version 7.17)
[ 202.109974] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input6
[ 205.515484] Bluetooth: Core ver 2.16
[ 205.520868] NET: Registered protocol family 31
[ 205.525841] Bluetooth: HCI device and connection manager initialized
[ 205.530808] Bluetooth: HCI socket layer initialized
[ 205.535704] Bluetooth: L2CAP socket layer initialized
[ 205.541918] Bluetooth: SCO socket layer initialized
[ 205.576694] Bluetooth: RFCOMM TTY layer initialized
[ 205.582105] Bluetooth: RFCOMM socket layer initialized
[ 205.586881] Bluetooth: RFCOMM ver 1.11
[ 205.642830] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 205.647678] Bluetooth: BNEP filters: protocol multicast
[ 205.746878] lp0: using parport0 (interrupt-driven).
[ 205.775301] ppdev: user-space parallel port driver
[ 235.419340] FAT-fs (sdd1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 238.777727] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 238.999010] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
jo@debjo:~$
je n’arrive pas à savoir de quel côté il faut regarder.
Pourriez vous m’aider s’il vous plait? 
c’est pourquoi je me suis retrouvé avec deux fois la même ligne