Carte PCI Maxtor S-ATA/150 non reconnue

Support Debian
#1

Bonjour,

J’'ai acheté un disque dur Maxtor de 300Go en IDE.
Mes autres nappes étant occupées, je le branche sur une nappe reliée à une carte PCI qui était fournie avec.
La carte est une Carte SATA-PCI 150
URL raccourci

On peut brancher 2 SATA ou une nappe pour 2 IDE.
J’ai branché le disque sur la nappe IDE.

Au boot le bios se charge, puis le bios de la carte.
Sous windows aucun probleme. La carte est reconnue, le disque aussi.

Sous linux je n’ai accès à rien.

Ma distrib est une "debian testing i386 installée le 20/01/2007.
Le noyau est un "2.6.18-i686"
carte mère Asus P4P800
Processeur P4@2.4ghz

Sur le site de Maxtor on trouve bien les pilotes pour toutes les versions de windows, mais rien pour linux.

Avez vous une solution à pars acheter une autre carte PCI/IDE compatible linux ?

#2

Il y a peut être un réglege dans le BIOS pour que le disque IDE soit pris en compte (Windows passe souvent outre les indications du BIOS…)

#3

un petit lspci -n ?
forum.debian-fr.org/viewtopic.php?t=3834

#4

Salut les gars, merci pour vos réponses,

@fran.b :

  • Je lutte avec les reglages IDE de mon bios qui en plus me semble buggé.
    Il faut que je relance la config du bios 2 fois et au bout du 2e boot mes reglages sont pris en charge.

  • J’ai le choix entre un “compatible mode” (dos, …)
    . primary pata + sata
    . secondary pata + sata
    . Pata ports only

  • ou le choix avec “enhanced mode” (W2K, XP, …)
    . “pata only”
    . “sata only”
    . “pata + sata”

Quand je change les reglages, sous linux j’ai pratiquement tout le temps des erreur :
hda : dma_timer expiry : dma status == 0x64
hda : dma interrupt recovery
hda : lost interrupt
hdb : dma_timer expiry : dma status == 0x64
hdb : dma interrupt recovery
hdb : lost interrupt
hdc : dma_timer expiry : dma status == 0x64
hdc : dma interrupt recovery
hdc : lost interrupt
…
…
.

Ca ne marche que en “Compatible mode” ; “Pata Ports Only”

@mattotop :
Je ne peux plus booter sur linux avant d’avoir retrouvé le bon parametrage IDE du bios.
Je te poste le resultat de tes requêtes dès que ça redemarre.
(j’ecris depuis un autre PC là)

#5

@mattotop :

Un petit “lspci -n” donne :
Cerbere:/home/fabrice# lspci -n
00:00.0 0600: 8086:2570 (rev 02)
00:01.0 0604: 8086:2571 (rev 02)
00:1d.0 0c03: 8086:24d2 (rev 02)
00:1d.1 0c03: 8086:24d4 (rev 02)
00:1d.2 0c03: 8086:24d7 (rev 02)
00:1d.3 0c03: 8086:24de (rev 02)
00:1d.7 0c03: 8086:24dd (rev 02)
00:1e.0 0604: 8086:244e (rev c2)
00:1f.0 0601: 8086:24d0 (rev 02)
00:1f.1 0101: 8086:24db (rev 02)
00:1f.3 0c05: 8086:24d3 (rev 02)
01:00.0 0300: 1002:4b49
01:00.1 0380: 1002:4b69
02:0a.0 0200: 10ec:8139 (rev 10)
02:0b.0 0180: 105a:3375 (rev 02)
02:0d.0 0401: 13f6:0111 (rev 10)

#6

lshw : Il voit ma carte PCI Maxtor !!! j’ai mis en gras tout le paragraphe où elle apparait !

…

description: Desktop Computer
product: To Be Filled By O.E.M.
vendor: To Be Filled By O.E.M.
version: To Be Filled By O.E.M.
serial: To Be Filled By O.E.M.
width: 32 bits
capabilities: smbios-2.3 dmi-2.3
configuration: boot=normal chassis=desktop uuid=00020003-0004-0005-0006-0007 00080009

*-core
description: Motherboard
product: P4P800
vendor: ASUSTeK Computer Inc.
physical id: 0
version: Rev 1.xx
serial: MB-1234567890
slot: DIMM B2

*-firmware
description: BIOS
vendor: American Megatrends Inc.
physical id: 0
version: 1019.005 (10/14/2004)
size: 64KB
capacity: 448KB
capabilities: isa pci pnp apm upgrade shadowing escd cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer int10video acpi usb agp ls120boot zipboot biosbootspecification

*-cpu
description: CPU
product: Intel® Pentium® 4 CPU 2.40GHz
vendor: Intel Corp.
physical id: 4
bus info: cpu@0
version: 15.2.9
slot: CPU 1
size: 2400MHz
capacity: 3600MHz
width: 32 bits
clock: 200MHz
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe cid xtpr
configuration: id=0
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 8KB
capacity: 8KB
capabilities: pipeline-burst internal varies data
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 512KB
capacity: 512KB
capabilities: pipeline-burst internal varies unified
*-cache:2 DISABLED
description: L3 cache
physical id: 7
slot: L3-Cache
capabilities: internal
*-logicalcpu:0
description: Logical CPU
physical id: 0.1
width: 32 bits
capabilities: logical
*-logicalcpu:1
description: Logical CPU
physical id: 0.2
width: 32 bits
capabilities: logical

*-memory
description: System Memory
physical id: 38
slot: System board or motherboard
size: 1GB
*-bank:0
description: DIMM SDRAM Synchronous
product: PartNum0
vendor: Manufacturer0
physical id: 0
serial: SerNum0
slot: DIMM0
size: 256MB
width: 64 bits
*-bank:1
description: DIMM SDRAM Synchronous
product: PartNum1
vendor: Manufacturer1
physical id: 1
serial: SerNum1
slot: DIMM1
size: 256MB
width: 64 bits
*-bank:2
description: DIMM SDRAM Synchronous
product: PartNum2
vendor: Manufacturer2
physical id: 2
serial: SerNum2
slot: DIMM2
size: 256MB
width: 64 bits
*-bank:3
description: DIMM SDRAM Synchronous
product: PartNum3
vendor: Manufacturer3
physical id: 3
serial: SerNum3
slot: DIMM3
size: 256MB
width: 64 bits

*-pci
description: Host bridge
product: 82865G/PE/P DRAM Controller/Host-Hub Interface
vendor: Intel Corporation
physical id: 60000000
bus info: pci@00:00.0
version: 02
width: 32 bits
clock: 33MHz
resources: iomemory:60000000-6fffffff
*-pci:0
description: PCI bridge
product: 82865G/PE/P PCI to AGP Controller
vendor: Intel Corporation
physical id: 1
bus info: pci@00:01.0
version: 02
width: 32 bits
clock: 66MHz
capabilities: pci normal_decode bus_master

*-display:0
description: VGA compatible controller
product: R480 [Radeon X850XT]
vendor: ATI Technologies Inc
physical id: 0
bus info: pci@01:00.0
version: 00
size: 128MB
width: 32 bits
clock: 66MHz
capabilities: vga bus_master cap_list
configuration: latency=64 mingnt=8
resources: iomemory:d8000000-dfffffff ioport:d000-d0ff iomemory: fbee0000-fbeeffff irq:169
*-display:1 UNCLAIMED
description: Display controller
product: R480 [Radeon X850XT] (Secondary)
vendor: ATI Technologies Inc
physical id: 0.1
bus info: pci@01:00.1
version: 00
size: 128MB
width: 32 bits
clock: 66MHz
capabilities: bus_master cap_list
configuration: latency=64 mingnt=8
resources: iomemory:f0000000-f7ffffff iomemory:fbef0000-fbefffff

*-usb:0
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@00:1d.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: ioport:c480-c49f irq:169
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.18-3-686 uhci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:1
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@00:1d.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: ioport:c800-c81f irq:177
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.18-3-686 uhci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb
description: Mouse
product: USB-PS/2 Optical Mouse
vendor: Logitech
physical id: 2
bus info: usb@2:2
version: 20.00
capabilities: usb-2.00
configuration: driver=usbhid maxpower=98mA speed=1.5MB/s
*-usb:2
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3
vendor: Intel Corporation
physical id: 1d.2
bus info: pci@00:1d.2
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: ioport:c880-c89f irq:185
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.18-3-686 uhci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:3
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1d.3
bus info: pci@00:1d.3
version: 02
width: 32 bits
clock: 33MHz
capabilities: uhci bus_master
configuration: driver=uhci_hcd latency=0
resources: ioport:cc00-cc1f irq:169
*-usbhost
product: UHCI Host Controller
vendor: Linux 2.6.18-3-686 uhci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 2.06
capabilities: usb-1.10
configuration: driver=hub maxpower=0mA slots=2 speed=12.0MB/s
*-usb:4
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@00:1d.7
version: 02
width: 32 bits
clock: 33MHz
capabilities: ehci bus_master cap_list
configuration: driver=ehci_hcd latency=0
resources: iomemory:fbdffc00-fbdfffff irq:193
*-usbhost
product: EHCI Host Controller
vendor: Linux 2.6.18-3-686 ehci_hcd
physical id: 1
bus info: usb@5
logical name: usb5
version: 2.06
capabilities: usb-2.00
configuration: driver=hub maxpower=0mA slots=8 speed=480.0MB/s

*-pci:1
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@00:1e.0
version: c2
width: 32 bits
clock: 33MHz
capabilities: pci normal_decode bus_master

*-network
description: Ethernet interface
product: RTL-8139/8139C/8139C+
vendor: Realtek Semiconductor Co., Ltd.
physical id: a
bus info: pci@02:0a.0
logical name: eth0
version: 10
serial: 00:02:44:8f:00:1d
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=8139too d riverversion=0.9.27 duplex=full ip=192.168.0.4 latency=64 link=yes maxlatency=64 mingnt=32 multicast=yes port=MII speed=100MB/s
resources: ioport:e800-e8ff iomemory:fbfffc00-fbfffcff irq:201
[b]

      *-storage
            description: Mass storage controller
            product: PDC20375 (SATA150 TX2plus)
            vendor: Promise Technology, Inc.
            physical id: b
            bus info: pci@02:0b.0
            version: 02
            width: 32 bits
            clock: 66MHz
            capabilities: storage bus_master cap_list
            configuration: driver=sata_promise latency=96 maxlatency=18 ming nt=4
            resources: ioport:ec00-ec3f ioport:e480-e48f ioport:e400-e47f io memory:fbffe000-fbffefff iomemory:fbfc0000-fbfdffff irq:193

===============================
[/b]

*-multimedia
description: Multimedia audio controller
product: CM8738
vendor: C-Media Electronics Inc
physical id: d
bus info: pci@02:0d.0
version: 10
width: 32 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=C-Media PCI latency=64 maxlatency=24 mingn t=2
resources: ioport:e000-e0ff irq:217

*-isa
description: ISA bridge
product: 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@00:1f.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: latency=0

*-ide
description: IDE interface
product: 82801EB/ER (ICH5/ICH5R) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@00:1f.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: ide bus_master
configuration: driver=PIIX_IDE latency=0
resources: ioport:fc00-fc0f iomemory:50100000-501003ff irq:185
*-ide:0
description: IDE Channel 0
physical id: 0
bus info: ide@0
logical name: ide0
clock: 33MHz
*-disk:0
description: ATA Disk
product: ST380011A
vendor: Seagate
physical id: 0
bus info: ide@0.0
logical name: /dev/hda
version: 3.06
serial: 5JVZ77V4
size: 74GB
capacity: 74GB
capabilities: ata dma lba iordy smart security pm partitioned partitioned:dos
configuration: mode=udma5 smart=on
*-volume:0
description: HPFS/NTFS partition
physical id: 1
bus info: ide@0.0,1
logical name: /dev/hda1
capacity: 19GB
capabilities: primary bootable
*-volume:1
description: HPFS/NTFS partition
physical id: 2
bus info: ide@0.0,2
logical name: /dev/hda2
capacity: 54GB
capabilities: primary
*-disk:1
description: ATA Disk
product: ST380011A
vendor: Seagate
physical id: 1
bus info: ide@0.1
logical name: /dev/hdb
version: 8.01
serial: 5JVGKS2T
size: 74GB
capacity: 74GB
capabilities: ata dma lba iordy smart security pm partitioned partitioned:dos
configuration: mode=udma5 smart=on
*-volume:0
description: Linux filesystem partition
physical id: 1
bus info: ide@0.1,1
logical name: /dev/hdb1
capacity: 71GB
capabilities: primary bootable
*-volume:1
description: Extended partition
physical id: 2
bus info: ide@0.1,2
logical name: /dev/hdb2
size: 2965MB
capacity: 2965MB
capabilities: primary extended partitioned partitioned:ext ended
*-logicalvolume
description: Linux swap / Solaris partition
physical id: 5
logical name: /dev/hdb5
capacity: 2965MB
capabilities: nofs
*-ide:1
description: IDE Channel 1
physical id: 1
bus info: ide@1
logical name: ide1
clock: 33MHz
*-cdrom:0
description: DVD-RAM writer
product: SONY DVD RW AW-G170A
physical id: 0
bus info: ide@1.0
logical name: /dev/hdc
version: 1.71
capabilities: packet atapi cdrom removable nonmagnetic dma lb a iordy audio cd-r cd-rw dvd dvd-r dvd-ram
configuration: mode=udma4
*-disc
physical id: 0
logical name: /dev/hdc
*-cdrom:1
description: CD-R/CD-RW writer
product: ASUS CRW-5232AS
physical id: 1
bus info: ide@1.1
logical name: /dev/hdd
version: 1.03
capabilities: packet atapi cdrom removable nonmagnetic dma lb a iordy audio cd-r cd-rw
configuration: mode=udma2
*-disc
physical id: 0
logical name: /dev/hdd
*-serial
description: SMBus
product: 82801EB/ER (ICH5/ICH5R) SMBus Controller
vendor: Intel Corporation
physical id: 1f.3
bus info: pci@00:1f.3
version: 02
width: 32 bits
clock: 33MHz
configuration: driver=i801_smbus latency=0
resources: ioport:400-41f irq:209

#7

Sur cette carte PCI Maxtor sata/150 il y a un disque de connecté. Ce disque est un Maxtor 300 Go . découpé en deux volumes.
vol 1 = 100 Go
vol 2 = 200 Go

les deux volumes sont en ntfs (pour l’instant)

lshw voit la carte mais pas le disque :-/

#8

Essaye de faire un modprobe sata_promise, (j’ai copie le «lspci -n» sur
kmuto.jp/debian/hcl/ fait la même chose en beaucoup mieux (il est plus complet) mais là il est HS apparement (ça lui arrive de temps à autre, c’est pour ça que j’avais fait le script modules.php mais moi je n’utilise que les sources du noyau et sur les périphériques PCI ou USB seulement donc c’est très incomplet, le gars a fait vraiment un boulot remarquable).

#9

modprobe sata_promise

ça ne donne rien

(
j’avais copié le résultat de lspci dans “http://kmuto.jp/debian/hcl” comme indiqué dans le lien de mattotop
)

#10

Fais un dmesg après le modprobe, il t’affiche quoi?

#11

réponse de kmuto :[quote]PCI ID Works? Vendor Device Driver Comment
80862570 Yes Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface intel-agp
80862571 - Intel Corporation 82865G/PE/P PCI to AGP Controller
808624d2 Yes Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 usb-uhci
808624d4 Yes Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 usb-uhci
808624d7 Yes Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 usb-uhci
808624de Yes Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 usb-uhci
808624dd Yes Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller ehci-hcd
8086244e Yes Intel Corporation 82801 PCI Bridge hw_random,i810_rng
808624d0 Yes Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge i8xx_tco,i810-tco
808624db Yes Intel Corporation P4C800 Mainboard piix
808624d3 Yes Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller i2c-i801
10024b49 Yes ATI Technologies Inc R480 [Radeon X850XT] ati
10024b69 - ATI Technologies Inc R480 [Radeon X850XT secondary]
10ec8139 Yes Realtek Semiconductor Co., Ltd. RT8139 8139too,8139cp
105a3375 Yes Promise Technology, Inc. PDC20375 (SATA150 TX2plus) sata_promise
13f60111 Yes C-Media Electronics Inc CMI8738/C3DX PCI Audio Device snd-cmipci,cmpci
[/quote]J’ai eu de la chance …

#12

modprobe sata_promise

dmesg

Linux version 2.6.18-3-686 (Debian 2.6.18-7) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-20)) #1 SMP Mon Dec 4 16:41:14 UTC 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000ff780
On node 0 totalpages: 261936
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32560 pages, LIFO batch:7
DMI 2.3 present.
ACPI: RSDP (v002 ACPIAM ) @ 0x000f9e30
ACPI: XSDT (v001 A M I OEMXSDT 0x10000414 MSFT 0x00000097) @ 0x3ff30100
ACPI: FADT (v003 A M I OEMFACP 0x10000414 MSFT 0x00000097) @ 0x3ff30290
ACPI: MADT (v001 A M I OEMAPIC 0x10000414 MSFT 0x00000097) @ 0x3ff30390
ACPI: OEMB (v001 A M I OEMBIOS 0x10000414 MSFT 0x00000097) @ 0x3ff40040
ACPI: DSDT (v001 P4P81 P4P81104 0x00000104 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bfb80000)
Detected 2398.969 MHz processor.
Built 1 zonelists. Total pages: 261936
Kernel command line: root=/dev/hdb1 ro
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore… done.
Enabling unmasked SIMD FPU exception support… done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1031004k/1047744k available (1543k kernel code, 16112k reserved, 574k data, 196k init, 130240k highmem)
Checking if this processor honours the WP bit even in supervisor mode… Ok.
Calibrating delay using timer specific routine… 4801.63 BogoMIPS (lpj=9603266)
Security Framework v1.0.0 initialized
SELinux: Disabled at boot.
Capability LSM initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking ‘hlt’ instruction… OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
CPU0: Intel® Pentium® 4 CPU 2.40GHz stepping 09
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine… 4798.06 BogoMIPS (lpj=9596132)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
CPU1: Thermal monitoring enabled
CPU1: Intel® Pentium® 4 CPU 2.40GHz stepping 09
Total of 2 processors activated (9599.69 BogoMIPS).
ENABLING IO-APIC IRQs
…TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=7
checking if image is initramfs… it is
Freeing initrd memory: 4410k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0480-04bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PRT]
ACPI: PCI Interrupt Routing Table [_SB.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 © Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
ASUS P4P800 detected. Disabling PnPBIOS
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn’t work, try “pci=routeirq”. If it helps, post a report
PCI: Cannot allocate resource region 0 of device 0000:00:00.0
pnp: 00:0a: ioport range 0x680-0x6ff has been reserved
pnp: 00:0a: ioport range 0x290-0x297 has been reserved
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: fbe00000-fbefffff
PREFETCH window: d8000000-faffffff
PCI: Bridge: 0000:00:1e.0
IO window: e000-efff
MEM window: fbf00000-fbffffff
PREFETCH window: 50000000-500fffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
audit(1170190593.008:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
isapnp: Scanning for PnP cards…
isapnp: No Plug & Play device found
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn’t have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 8
NET: Registered protocol family 20
Starting balanced_irq
Using IPI No-Shortcut mode
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 196k freed
Time: tsc clocksource has been installed.
input: AT Translated Set 2 keyboard as /class/input/input0
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 169, io base 0x0000c480
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 177, io base 0x0000c800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
SCSI subsystem initialized
libata version 2.00 loaded.
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 185, io base 0x0000c880
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 169, io base 0x0000cc00
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 193, io mem 0xfbdffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb 2-2: new low speed USB device using uhci_hcd and address 2
8139cp 0000:02:0a.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip8139cp 0000:02:0a.0: Try the “8139too” driver instead.
sata_promise 0000:02:0b.0: version 1.04
ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 193
8139too Fast Ethernet driver 0.9.27
ata1: SATA max UDMA/133 cmd 0xF8806200 ctl 0xF8806238 bmdma 0x0 irq 193
ata2: SATA max UDMA/133 cmd 0xF8806280 ctl 0xF88062B8 bmdma 0x0 irq 193
scsi0 : sata_promise
ata1: SATA link down (SStatus 0 SControl 300)
scsi1 : sata_promise
ata2: SATA link down (SStatus 0 SControl 0)
ACPI: PCI Interrupt 0000:02:0a.0[A] -> GSI 22 (level, low) -> IRQ 201
eth0: RealTek RTL8139 at 0xe800, 00:02:44:8f:00:1d, IRQ 201
eth0: Identified 8139 chip type 'RTL-8100B/8139D’
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0…
usb 2-2: new low speed USB device using uhci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new driver hiddev
input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
hda: ST380011A, ATA DISK drive
hdb: ST380011A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1…
hdc: SONY DVD RW AW-G170A, ATAPI CD/DVD-ROM drive
hdd: ASUS CRW-5232AS, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2
hdb: max request size: 512KiB
hdb: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1 hdb2 < hdb5 >
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Attempting manual resume
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
ts: Compaq touchscreen protocol output
Linux agpgart interface v0.101 © Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: AGP aperture is 256M @ 0x60000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
input: PC Speaker as /class/input/input2
Real Time Clock Driver v1.12ac
Floppy drive(s): fd0 is 1.44M
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 209
FDC 0 is a post-1991 82077
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 217
Adding 3036244k swap on /dev/hdb5. Priority:-1 extents:1 across:3036244k
EXT3 FS on hdb1, internal journal
loop: loaded (max 8 devices)
device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
eth0: no IPv6 routers present
lp0: using parport0 (interrupt-driven).
ppdev: user-space parallel port driver
[drm] Initialized drm 1.0.1 20051102
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[drm] Initialized radeon 1.25.0 20060524 on minor 0
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
eth0: no IPv6 routers present
UDF-fs: No VRS found
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
hdd: tray open
end_request: I/O error, dev hdd, sector 0
Buffer I/O error on device hdd, logical block 0
Buffer I/O error on device hdd, logical block 1
Buffer I/O error on device hdd, logical block 2
Buffer I/O error on device hdd, logical block 3
Buffer I/O error on device hdd, logical block 4
Buffer I/O error on device hdd, logical block 5
Buffer I/O error on device hdd, logical block 6
Buffer I/O error on device hdd, logical block 7
hdd: tray open
end_request: I/O error, dev hdd, sector 0
Buffer I/O error on device hdd, logical block 0
hdd: tray open
end_request: I/O error, dev hdd, sector 4
Buffer I/O error on device hdd, logical block 1
hdd: tray open
end_request: I/O error, dev hdd, sector 0
hdd: tray open
end_request: I/O error, dev hdd, sector 4
hdd: tray open
end_request: I/O error, dev hdd, sector 0
hdd: tray open
end_request: I/O error, dev hdd, sector 4
hdd: tray open
end_request: I/O error, dev hdd, sector 0
hdd: tray open
end_request: I/O error, dev hdd, sector 4
hdd: tray open
end_request: I/O error, dev hdd, sector 0
hdd: tray open
end_request: I/O error, dev hdd, sector 4
UDF-fs: No VRS found
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
hdd: tray open
end_request: I/O error, dev hdd, sector 0
printk: 8 messages suppressed.
Buffer I/O error on device hdd, logical block 0
Buffer I/O error on device hdd, logical block 1
Buffer I/O error on device hdd, logical block 2
Buffer I/O error on device hdd, logical block 3
Buffer I/O error on device hdd, logical block 4
Buffer I/O error on device hdd, logical block 5
Buffer I/O error on device hdd, logical block 6
Buffer I/O error on device hdd, logical block 7
hdd: tray open
end_request: I/O error, dev hdd, sector 0
Buffer I/O error on device hdd, logical block 0
hdd: tray open
end_request: I/O error, dev hdd, sector 4
Buffer I/O error on device hdd, logical block 1
hdd: tray open
end_request: I/O error, dev hdd, sector 0
hdd: tray open
end_request: I/O error, dev hdd, sector 4
hdd: tray open
end_request: I/O error, dev hdd, sector 0
hdd: tray open
end_request: I/O error, dev hdd, sector 4
hdd: tray open
end_request: I/O error, dev hdd, sector 0
hdd: tray open
end_request: I/O error, dev hdd, sector 4
hdd: tray open
end_request: I/O error, dev hdd, sector 0
hdd: tray open
end_request: I/O error, dev hdd, sector 4
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!NTFS driver 2.1.27 [Flags: R/W MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.

#13

[quote=“ginkgo biloba”]réponse de kmuto :[quote]PCI ID Works? Vendor Device Driver Comment
80862570 Yes Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface intel-agp
80862571 - Intel Corporation 82865G/PE/P PCI to AGP Controller
808624d2 Yes Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 usb-uhci
808624d4 Yes Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 usb-uhci
808624d7 Yes Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 usb-uhci
808624de Yes Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 usb-uhci
808624dd Yes Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller ehci-hcd
8086244e Yes Intel Corporation 82801 PCI Bridge hw_random,i810_rng
808624d0 Yes Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge i8xx_tco,i810-tco
808624db Yes Intel Corporation P4C800 Mainboard piix
808624d3 Yes Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller i2c-i801
10024b49 Yes ATI Technologies Inc R480 [Radeon X850XT] ati
10024b69 - ATI Technologies Inc R480 [Radeon X850XT secondary]
10ec8139 Yes Realtek Semiconductor Co., Ltd. RT8139 8139too,8139cp
105a3375 Yes Promise Technology, Inc. PDC20375 (SATA150 TX2plus) sata_promise
13f60111 Yes C-Media Electronics Inc CMI8738/C3DX PCI Audio Device snd-cmipci,cmpci
[/quote]J’ai eu de la chance …[/quote]
Veinard !

#14

Bon il est reconnu:

[quote]sata_promise 0000:02:0b.0: version 1.04
ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 23 (level, low) -> IRQ 193
8139too Fast Ethernet driver 0.9.27
ata1: SATA max UDMA/133 cmd 0xF8806200 ctl 0xF8806238 bmdma 0x0 irq 193
ata2: SATA max UDMA/133 cmd 0xF8806280 ctl 0xF88062B8 bmdma 0x0 irq 193
scsi0 : sata_promise
ata1: SATA link down (SStatus 0 SControl 300)
scsi1 : sata_promise
ata2: SATA link down (SStatus 0 SControl 0)
[/quote]

mais il y a un pbm d’erreurs SATA… A vue de nez, tu n’es pas le seul:

http://lkml.org/lkml/2006/10/1/186

Après recherches, c’est un bug du «driver», peut être en changeant de noyau… mais un 2.6.18-3 c’est déjà récent…

#15

Bon, j’ai aussi un chipset bancal, que je ne fais à peux prés bien marcher qu’en spécifiant ‘pci=routeirq’ ou mieux un ‘pci=assign-busses’ au noyau.
Souvent, ça boote. :laughing:

#16

Merci pour ton diagnostique fran.b

A tout hasard, tu connais une carte PCI / IDE avec laquelle il n’y a pas de probleme ?

@mattotop :
La seule chose que je peux spécifier à mon kernel c’est … “–help” :laughing:
Sorti de là je patauge.

#17

quote=“fabrozor”

@mattotop :
La seule chose que je peux spécifier à mon kernel c’est … “–help” :laughing:
Sorti de là je patauge.[/quote]C’est à dire ?
Tu as bien grub ?
Tu te positionne sur la ligne de lancement de ton noyau, tu tapes 'e’
Tu te positionnes ensuite sur la ligne “kernel…”, tu fais ‘e’,
Tu fais les modifs que tu veux (tu ajoutes pci=assign-buses, par exemple),
Tu sors avec 'entrée’
Tu tapes ‘b’ pour booter.
Les changements ne sont que temporaires. Si tu veux ajuster définitivement, tu reportes la modif qui fonctionne dans /boot/grub/menu.lst, dans la ligne “# kopt=…”

#18

Une solution brutale consiste à importer le sata_promise du 2.6.19 sur le 2.6.18-3 de la debian:

En clair
chargement des sources de debian, chargement à coté du dernier 2.6.19-dernier-cri-sorti-il-y-a-3-minutres, tu récupères le code du sata-promise de ce noyau et tu écrases froidement celui du 2.6.18-3 de debian. Tu compiles avec la configuration de debian (sans installé), tu cherches dans le résultat le module sata_promise.ko et après avoir déplacer celui de ton noyau, tu le mets le nouveau. (Tu peux faire un rmmod suivi de insmod). Là tu regardes si ça marche mieux. Si ça marche, il ne reste plus qu’à entériner la chose. Peut être faudra-t-il refaire l’initrd si ton module est dedans…

#19

En attendant essayes le pci=assign-busses ou pci=routeirq
essayes aussi noapic.

#20

C’est sur que ce serait le plus simple. Si j’ia bien compris le pci=assign-busses permet au noyau de forcer l’assignation des BUS PCI (ce qui permet de régler des pbms de conflit avec un firmware), par contre que fait pci=routeirq? Je ne connais pas ce truc et ne l’ai pas vu dans le BottPrompt Howto