[Clos] Pas de serveur X à l'install avec une Radeon 9200

Thomas2 · Février 20, 2016, 12:44pm

Bonjour Monde

Malgré une recherche sur “X debian radeon”, je ne trouve pas sujet qui aborde mon problème.

Je souhaitais installer Debian pour apprendre à la connaitre. J’ai donc téléchargé un CD de net install de Sarge pour amd64 (en réalité pour EMT64), effacé mon disque (une ubuntu et une mandriva) et commencé l’install (en stable avec juste la bureautique et sans choix individuel des paquets).

L’install se passe à merveille, mais au reboot, message du serveur X pour m’informer qu’il ne peut se lancer.

J’ai essayé XFconfig, mais aucune icône du graphique n’a répondu.

En fait, je sollicite votre aide surtout pour comprendre … le message d’erreur, je n’arrive pas à savoir s’il ne trouve pas la CG (son driver), ou si le pb vient d’ailleurs (comme la vérité : )

Le log est un peu long, mais j’ai préféré le reproduire en entier :

[i]XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14sarge1 20050915192417 root@bester.farm.ftbfs.de)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.11.6-vs195-farm1.0 x86_64 [ELF]
Build Date: 15 September 2005

This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way. Bugs should be reported to the Debian Bug Tracking System; see
<URL: debian.org/Bugs/Reporting >.

We strongly encourage the use of the “reportbug” package and command
to ensure that bug reports contain as much useful information as
possible.

Before filing a bug report, you may want to consult the Debian X FAQ:
XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz

Module Loader present
OS Kernel: Linux version 2.6.8-11-amd64-generic (buildd@athlon.lowpingbastards.de) (gcc version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)) #1 Wed Jun 1 00:42:47 CEST 2005
Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/XFree86.0.log”, Time: Sat Mar 18 20:59:16 2006
(==) Using config file: “/etc/X11/XF86Config-4”
(==) ServerLayout “Default Layout”
() |–>Screen “Default Screen” (0)
() | |–>Monitor “Écran générique”
() | |–>Device “Carte vidéo générique”
() |–>Input Device “Generic Keyboard”
() Option “XkbRules” “xfree86”
() XKB: rules: “xfree86”
() Option “XkbModel” “pc105”
() XKB: model: “pc105”
() Option “XkbLayout” “fr”
() XKB: layout: “fr”
(==) Keyboard: CustomKeycode disabled
() |–>Input Device “Configured Mouse”
(WW) The directory “/usr/lib/X11/fonts/cyrillic” does not exist.
Entry deleted from font path.
(WW) The directory “/usr/lib/X11/fonts/CID” does not exist.
Entry deleted from font path.
(**) FontPath set to “unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100dpi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/lib/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi”
(==) RgbPath set to “/usr/X11R6/lib/X11/rgb”
(==) ModulePath set to “/usr/X11R6/lib/modules”
(++) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: “bitmap”
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: “pcidata”
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x00000000, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0308 card 1849,0308 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1308 card 1849,1308 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2308 card 1849,2308 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3208 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4308 card 1849,4308 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:5: chip 1106,5308 card 1849,5308 rev 00 class 08,00,20 hdr 80
(II) PCI: 00:00:7: chip 1106,7308 card 1849,7308 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0f:0: chip 1106,3149 card 1849,3149 rev 80 class 01,01,8f hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1849,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1849,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1849,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1849,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1849,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1849,3104 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1849,4227 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1849,0850 rev 60 class 04,01,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1849,3065 rev 78 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5960 card 1043,004c rev 01 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5940 card 1043,004d rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:0:1), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:0:2), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:0:3), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:0:4), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Host-to-PCI bridge:
(II) Bus -1: bridge is at (0:0:7), (-1,-1,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus -1 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus -1 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) Bus -1 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000b (VGA_EN is set)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000cfff (0x3000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xff500000 - 0xff5fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xbff00000 - 0xdfefffff (0x20000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(–) PCI:*(1:0:0) ATI Technologies Inc unknown chipset (0x5960) rev 1, Mem @ 0xd0000000/27, 0xff5f0000/16, I/O @ 0xc000/8, BIOS @ 0xff5c0000/17
(–) PCI: (1:0:1) ATI Technologies Inc unknown chipset (0x5940) rev 1, Mem @ 0xc8000000/27, 0xff5e0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x100000000) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xf8000000 from 0xfbffffff to 0xf7ffffff
(II) Active PCI resource ranges:
[0] -1 0 0xff6ffc00 - 0xff6ffcff (0x100) MX[B]
[1] -1 0 0xff6ff800 - 0xff6ff8ff (0x100) MX[B]
[2] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[3] -1 0 0xff5c0000 - 0xff5dffff (0x20000) MXB
[4] -1 0 0xff5f0000 - 0xff5fffff (0x10000) MXB
[5] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MXB
[6] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[7] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[9] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[10] -1 0 0x0000e080 - 0x0000e09f (0x20) IX[B]
[11] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[12] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[13] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[14] -1 0 0x0000d080 - 0x0000d08f (0x10) IX[B]
[15] -1 0 0x0000d400 - 0x0000d403 (0x4) IX[B]
[16] -1 0 0x0000d480 - 0x0000d487 (0x8) IX[B]
[17] -1 0 0x0000d800 - 0x0000d803 (0x4) IX[B]
[18] -1 0 0x0000d880 - 0x0000d887 (0x8) IX[B]
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IXB
(II) Inactive PCI resource ranges:
[0] -1 0 0xff5e0000 - 0xff5effff (0x10000) MXB
[1] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MXB
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xff6ffc00 - 0xff6ffcff (0x100) MX[B]
[1] -1 0 0xff6ff800 - 0xff6ff8ff (0x100) MX[B]
[2] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[3] -1 0 0xff5c0000 - 0xff5dffff (0x20000) MXB
[4] -1 0 0xff5f0000 - 0xff5fffff (0x10000) MXB
[5] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MXB
[6] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[7] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[8] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[9] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[10] -1 0 0x0000e080 - 0x0000e09f (0x20) IX[B]
[11] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[12] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[13] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[14] -1 0 0x0000d080 - 0x0000d08f (0x10) IX[B]
[15] -1 0 0x0000d400 - 0x0000d403 (0x4) IX[B]
[16] -1 0 0x0000d480 - 0x0000d487 (0x8) IX[B]
[17] -1 0 0x0000d800 - 0x0000d803 (0x4) IX[B]
[18] -1 0 0x0000d880 - 0x0000d887 (0x8) IX[B]
[19] -1 0 0x0000c000 - 0x0000c0ff (0x100) IXB
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xff5e0000 - 0xff5effff (0x10000) MXB
[1] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MXB
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MXB
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xff6ffc00 - 0xff6ffcff (0x100) MX[B]
[6] -1 0 0xff6ff800 - 0xff6ff8ff (0x100) MX[B]
[7] -1 0 0xf8000000 - 0xf7ffffff (0x0) MX[B]O
[8] -1 0 0xff5c0000 - 0xff5dffff (0x20000) MXB
[9] -1 0 0xff5f0000 - 0xff5fffff (0x10000) MXB
[10] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MXB
[11] -1 0 0xff5e0000 - 0xff5effff (0x10000) MXB
[12] -1 0 0xc8000000 - 0xcfffffff (0x8000000) MXB
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000e800 - 0x0000e8ff (0x100) IX[B]
[16] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
[17] -1 0 0x0000dc00 - 0x0000dc1f (0x20) IX[B]
[18] -1 0 0x0000e000 - 0x0000e01f (0x20) IX[B]
[19] -1 0 0x0000e080 - 0x0000e09f (0x20) IX[B]
[20] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
[21] -1 0 0x0000fc00 - 0x0000fc0f (0x10) IX[B]
[22] -1 0 0x0000ee00 - 0x0000eeff (0x100) IX[B]
[23] -1 0 0x0000d080 - 0x0000d08f (0x10) IX[B]
[24] -1 0 0x0000d400 - 0x0000d403 (0x4) IX[B]
[25] -1 0 0x0000d480 - 0x0000d487 (0x8) IX[B]
[26] -1 0 0x0000d800 - 0x0000d803 (0x4) IX[B]
[27] -1 0 0x0000d880 - 0x0000d887 (0x8) IX[B]
[28] -1 0 0x0000c000 - 0x0000c0ff (0x100) IXB
(II) LoadModule: “GLcore”
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) LoadModule: “bitmap”
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: “dbe”
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: “ddc”
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: “dri”
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module “drm”
(II) LoadModule: “drm”
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: “extmod”
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “freetype”
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: “glx”
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module “GLcore”
(II) LoadModule: “GLcore”
(II) Reloading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Loading extension GLX
(II) LoadModule: “int10”
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: “record”
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: “speedo”
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
(II) Module speedo: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.1
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: “type1”
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: “vbe”
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: “ati”
(II) Loading /usr/X11R6/lib/modules/drivers/ati_drv.o
(II) Module ati: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 6.5.5
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: “mouse”
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) ATI: ATI driver (version 6.5.5) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330/340/350 (A4) 4137,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP),
ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon 9200PRO 5960 (AGP), ATI Radeon 9200 5961 (AGP),
ATI Radeon 9200 5962 (AGP), ATI Radeon 9200SE 5964 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9700 NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
ATI FireGL RV360 AV (AGP), ATI Radeon Mobility 9600 (M10) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2 (M11) NV (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate “Device” section “Carte vidéo générique”.
(II) ATI: Unshared 8514/A not probed.
(II) ATI: Unshared Mach64 at PIO base 0x02EC not probed.
(WW) ATI: PCI/AGP Mach64 in slot 1:0:0 could not be detected!
(WW) ATI: PCI/AGP Mach64 in slot 1:0:1 could not be detected!
(EE) No devices detected.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file “/var/log/XFree86.0.log”.
Please report problems to submit@bugs.debian.org.[/i]

la CG est une Asus A9250 TD 182 (radeon 9200) AGP.

Merci de votre aide, paske là, je suis planté, et bien (j’ai déjà refait l’install une fois pour voir )…

Martin · Février 20, 2016, 12:44pm

Et xf86cfg ? C’est la configuration de X, en mode texte… J’avais aussi eu des problèmes avec une His Radeon 9600XT (mais moi j’avais un affichage en 600x800), je vias tenter de retrouver cette doc :s

fran.b · Février 20, 2016, 12:44pm

Oui, les cartes ATI sont tellement variées que ATI9200 regroupent plusieurs cartes. En attendant met «vesa» comme driver de carte. Ça marchera puis va sur le site
xoomer.virgilio.it/flavio.stanch … aller.html
pour installer les drivers de ta carte.

Thomas2 · Février 20, 2016, 12:44pm

Ok, merci, je teste xf86cfg…
sinon je mettrais “vesa” pour voir (de mémoire j’ai du tester ça via une réinstall, mais je n’ai pas réussi) …
je vais chercher comment sélectionner ce driver…

Damsss · Février 20, 2016, 12:44pm

Peux-tu nous montrer ton /etc/X11/XFConfig-4 ?
Apperemment, l’erreur est qu’il ne trouve pas de “device”.

Thomas2 · Février 20, 2016, 12:44pm

QQ news …

j’ai testé xf86config, c’est donc bien la version console : j’ai indiqué des valeurs moyennes pour l’écran, une fois vesa, une fois sans carte, une fois avec ati radeon pour la CG … rien n’y fait, le serveur X ne se lance pas.
Quant à xf86cfg, c’est la version graphique, que je n’avais pas su utiliser la fois dernières (la souris ne fonctionne pas) : cette fois j’ai réussi à sélectionner carte graphique vesa et à sauvegarder : nada, au reboot le serveur X plante aussi.

En fait ce qui me gêne le plus c’est que le fichier de log détaillé est à chaque fois et tjrs le même, celui collé au début du post : comme si mes actions sous xf86cfg et xf86config n’étaient pas enregistrées, car le log se termine tjrs par le “probe” de la carte ati … ???

Bref, je vais réssayer une install pour forcer le driver vesa, mais je commence à désespérer…
Aucune d’où ça peut venir?

Ah, je n’avais vu le dernier post: effectivement je voulais vérifier ça, par rapport au fait qu’il ne semble pas enregistrer mes modifs.

Voilà mon XF86Config-4 :
[i]

XF86Config-4 (XFree86 X Window System server configuration file)

This file was generated by dexconf, the Debian X Configuration tool, using

values from the debconf database.

Edit this file with caution, and see the XF86Config-4 manual page.

(Type “man XF86Config-4” at the shell prompt.)

This file is automatically updated on xserver-xfree86 package upgrades only

if it has not been modified since the last upgrade of the xserver-xfree86

package.

If you have edited this file but would like it to be automatically updated

again, run the following commands as root:

cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom

md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum

dpkg-reconfigure xserver-xfree86

Section "Files"
FontPath “unix/:7100” # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection

Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option “XkbRules” "xfree86"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option “Device” "/dev/input/mice"
Option “Protocol” "ImPS/2"
Option “Emulate3Buttons” "true"
Option “ZAxisMapping” "4 5"
EndSection

Section "Device"
Identifier "Carte vidéo générique"
Driver "ati"
EndSection

Section "Monitor"
Identifier "Écran générique"
HorizSync 30-60
VertRefresh 50-75
Option "DPMS"
EndSection

Section "Screen"
Identifier "Default Screen"
Device "Carte vidéo générique"
Monitor "Écran générique"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes “800x600” "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes “800x600” "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes “800x600” "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes “800x600” "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes “800x600” "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes “800x600” "640x480"
EndSubSection
EndSection

Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection

Section "DRI"
Mode 0666
EndSection[/i]

et le XF86Config :
[i]# File generated by xf86config.

Copyright © 1999 by The XFree86 Project, Inc.

Permission is hereby granted, free of charge, to any person obtaining a

copy of this software and associated documentation files (the “Software”),

to deal in the Software without restriction, including without limitation

the rights to use, copy, modify, merge, publish, distribute, sublicense,

and/or sell copies of the Software, and to permit persons to whom the

Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in

all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL

THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,

WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF

OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

SOFTWARE.

Except as contained in this notice, the name of the XFree86 Project shall

not be used in advertising or otherwise to promote the sale, use or other

dealings in this Software without prior written authorization from the

XFree86 Project.

**********************************************************************

Refer to the XF86Config(4/5) man page for details about the format of

this file.

**********************************************************************

Module section – this section is used to specify

which dynamically loadable modules to load.

**********************************************************************

Section “Module”

This loads the DBE extension module.

Load        "dbe"  	# Double buffer extension

This loads the miscellaneous extensions module, and disables

initialisation of the XFree86-DGA extension within that module.

SubSection  "extmod"
  Option    "omit xfree86-dga"   # don't initialise the DGA extension
EndSubSection

This loads the Type1 and FreeType font modules

Load        "type1"
Load        "speedo"

Load “freetype”

Load “xtt”

This loads the GLX module

Load “glx”

This loads the DRI module

Load “dri”

EndSection

**********************************************************************

Files section. This allows default font and rgb paths to be set

**********************************************************************

Section “Files”

The location of the RGB database. Note, this is the name of the

file minus the extension (like “.txt” or “.db”). There is normally

no need to change the default.

RgbPath	"/usr/X11R6/lib/X11/rgb"

Multiple FontPath entries are allowed (which are concatenated together),

as well as specifying multiple comma-separated entries in one FontPath

command (or a combination of both methods)

If you don’t have a floating point coprocessor and emacs, Mosaic or other

programs take long to start up, try moving the Type1 and Speedo directory

to the end of this list (or comment them out).

FontPath “/usr/X11R6/lib/X11/fonts/local/”

FontPath   "/usr/X11R6/lib/X11/fonts/misc/"
FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath   "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath   "/usr/X11R6/lib/X11/fonts/Type1/"

FontPath “/usr/X11R6/lib/X11/fonts/TrueType/”

FontPath “/usr/X11R6/lib/X11/fonts/freefont/”

FontPath   "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath   "/usr/X11R6/lib/X11/fonts/100dpi/"

The module search path. The default path is shown here.

ModulePath “/usr/X11R6/lib/modules”

EndSection

**********************************************************************

Server flags section.

**********************************************************************

Section “ServerFlags”

Uncomment this to cause a core dump at the spot where a signal is

received. This may leave the console in an unusable state, but may

provide a better stack trace in the core dump to aid in debugging

Option “NoTrapSignals”

Uncomment this to disable the VT switch sequence

(where n is 1 through 12). This allows clients to receive these key

events.

Option “DontVTSwitch”

Uncomment this to disable the server abort sequence

This allows clients to receive this key event.

Option “DontZap”

Uncomment this to disable the <KP_+>/<KP_-> mode switching

sequences. This allows clients to receive these key events.

Option “Dont Zoom”

Uncomment this to disable tuning with the xvidtune client. With

it the client can still run and fetch card and monitor attributes,

but it will not be allowed to change them. If it tries it will

receive a protocol error.

Option “DisableVidModeExtension”

Uncomment this to enable the use of a non-local xvidtune client.

Option “AllowNonLocalXvidtune”

Uncomment this to disable dynamically modifying the input device

(mouse and keyboard) settings.

Option “DisableModInDev”

Uncomment this to enable the use of a non-local client to

change the keyboard or mouse settings (currently only xset).

Option “AllowNonLocalModInDev”

EndSection

**********************************************************************

Input devices

**********************************************************************

Core keyboard’s InputDevice section

**********************************************************************

Section “InputDevice”

Identifier	"Keyboard1"
Driver	"Keyboard"

For most OSs the protocol can be omitted (it defaults to “Standard”).

When using XQUEUE (only for SVR3 and SVR4, but not Solaris),

uncomment the following line.

Option “Protocol” “Xqueue”

Option "AutoRepeat" "500 30"

Specify which keyboard LEDs can be user-controlled (eg, with xset(1))

Option “Xleds” “1 2 3”

Option “LeftAlt” “Meta”

Option “RightAlt” “ModeShift”

To customise the XKB settings to suit your keyboard, modify the

lines below (which are the defaults). For example, for a non-U.S.

keyboard, you will probably want to use:

Option “XkbModel” “pc102”

If you have a US Microsoft Natural keyboard, you can use:

Option “XkbModel” “microsoft”

Then to change the language, change the Layout setting.

For example, a german layout can be obtained with:

Option “XkbLayout” “de”

or:

Option “XkbLayout” “de”

Option “XkbVariant” “nodeadkeys”

If you’d like to switch the positions of your capslock and

control keys, use:

Option “XkbOptions” “ctrl:swapcaps”

These are the default XKB settings for XFree86

Option “XkbRules” “xfree86”

Option “XkbModel” “pc101”

Option “XkbLayout” “us”

Option “XkbVariant” “”

Option “XkbOptions” “”

Option “XkbDisable”

Option "XkbRules"	"xfree86"
Option "XkbModel"	"pc105"
Option "XkbLayout"	"fr"

EndSection

**********************************************************************

Core Pointer’s InputDevice section

**********************************************************************

Section “InputDevice”

Identifier and driver

Identifier	"Mouse1"
Driver	"mouse"
Option "Protocol"    "IMPS/2"
Option "Device"      "/dev/mouse"

Mouse-speed setting for PS/2 mouse.

Option “Resolution” “256”

When using XQUEUE, comment out the above two lines, and uncomment

the following line.

Option “Protocol” “Xqueue”

Baudrate and SampleRate are only for some Logitech mice. In

almost every case these lines should be omitted.

Option “BaudRate” “9600”

Option “SampleRate” “150”

Emulate3Buttons is an option for 2-button Microsoft mice

Emulate3Timeout is the timeout in milliseconds (default is 50ms)

Option "Emulate3Buttons"

Option “Emulate3Timeout” “50”

ChordMiddle is an option for some 3-button Logitech mice

Option “ChordMiddle”

EndSection

**********************************************************************

Other input device sections

this is optional and is required only if you

are using extended input devices. This is for example only. Refer

to the XF86Config man page for a description of the options.

**********************************************************************

Section “InputDevice”

Identifier “Mouse2”

Driver “mouse”

Option “Protocol” “MouseMan”

Option “Device” “/dev/mouse2”

EndSection

Section “InputDevice”

Identifier “spaceball”

Driver “magellan”

Option “Device” “/dev/cua0”

EndSection

Section “InputDevice”

Identifier “spaceball2”

Driver “spaceorb”

Option “Device” “/dev/cua0”

EndSection

Section “InputDevice”

Identifier “touchscreen0”

Driver “microtouch”

Option “Device” “/dev/ttyS0”

Option “MinX” “1412”

Option “MaxX” “15184”

Option “MinY” “15372”

Option “MaxY” “1230”

Option “ScreenNumber” “0”

Option “ReportingMode” “Scaled”

Option “ButtonNumber” “1”

Option “SendCoreEvents”

EndSection

Section “InputDevice”

Identifier “touchscreen1”

Driver “elo2300”

Option “Device” “/dev/ttyS0”

Option “MinX” “231”

Option “MaxX” “3868”

Option “MinY” “3858”

Option “MaxY” “272”

Option “ScreenNumber” “0”

Option “ReportingMode” “Scaled”

Option “ButtonThreshold” “17”

Option “ButtonNumber” “1”

Option “SendCoreEvents”

EndSection

**********************************************************************

Monitor section

**********************************************************************

Any number of monitor sections may be present

Section “Monitor”

Identifier  "iiyama"

HorizSync is in kHz unless units are specified.

HorizSync may be a comma separated list of discrete values, or a

comma separated list of ranges of values.

NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR’S

USER MANUAL FOR THE CORRECT NUMBERS.

HorizSync   31.5 - 57.0

HorizSync 30-64 # multisync

HorizSync 31.5, 35.2 # multiple fixed sync frequencies

HorizSync 15-25, 30-50 # multiple ranges of sync frequencies

VertRefresh is in Hz unless units are specified.

VertRefresh may be a comma separated list of discrete values, or a

comma separated list of ranges of values.

NOTE: THE VALUES HERE ARE EXAMPLES ONLY. REFER TO YOUR MONITOR’S

USER MANUAL FOR THE CORRECT NUMBERS.

VertRefresh 50-100

EndSection

**********************************************************************

Graphics device section

**********************************************************************

Any number of graphics device sections may be present

Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName “Unknown”

The chipset line is optional in most cases. It can be used to override

the driver’s chipset detection, and should not normally be specified.

Chipset “generic”

The Driver line must be present. When using run-time loadable driver

modules, this line instructs the server to load the specified driver

module. Even when not using loadable driver modules, this line

indicates which driver should interpret the information in this section.

Driver     "vga"

The BusID line is used to specify which of possibly multiple devices

this section is intended for. When this line isn’t present, a device

section can only match up with the primary video device. For PCI

devices a line like the following could be used. This line should not

normally be included unless there is more than one video device

intalled.

BusID “PCI:0:10:0”

VideoRam 256

Clocks 25.2 28.3

EndSection

Device configured by xf86config:

Section "Device"
Identifier "atr"
Driver “vesa”
#VideoRam 131072
# Insert Clocks lines here if appropriate
EndSection

**********************************************************************

Screen sections

**********************************************************************

Any number of screen sections may be present. Each describes

the configuration of a single screen. A single specific screen section

may be specified from the X server command line with the “-screen”

option.

Section "Screen"
Identifier "Screen 1"
Device "atr"
Monitor "iiyama"
DefaultDepth 16

Subsection "Display"
    Depth       8
    Modes       "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort    0 0
EndSubsection
Subsection "Display"
    Depth       16
    Modes       "1024x768"
    ViewPort    0 0
EndSubsection
Subsection "Display"
    Depth       24
    Modes       "1280x1024" "1024x768" "800x600" "640x480"
    ViewPort    0 0
EndSubsection

EndSection

**********************************************************************

ServerLayout sections.

**********************************************************************

Any number of ServerLayout sections may be present. Each describes

the way multiple screens are organised. A specific ServerLayout

section may be specified from the X server command line with the

“-layout” option. In the absence of this, the first section is used.

When now ServerLayout section is present, the first Screen section

is used alone.

Section “ServerLayout”

The Identifier line must be present

Identifier  "Simple Layout"

Each Screen line specifies a Screen section name, and optionally

the relative position of other screens. The four names after

primary screen name are the screens to the top, bottom, left and right

of the primary screen. In this example, screen 2 is located to the

right of screen 1.

Screen "Screen 1"

Each InputDevice line specifies an InputDevice section name and

optionally some options to specify the way the device is to be

used. Those options include “CorePointer”, “CoreKeyboard” and

“SendCoreEvents”.

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

Section “DRI”

Mode 0666

EndSection

[/i]

Ca vous dit quelque chose?
Merci pour votre aide

Damsss · Février 20, 2016, 12:44pm

Déjà, tu devrais mettre en commentaire les lignes
FontPath "/usr/lib/X11/fonts/cyrillic"
et FontPath "/usr/lib/X11/fonts/CID"
de ton fichier XF86Config-4 (puis
cp /etc/X11/XF86Config-4 /etc/X11/XF86Config-4.custom
md5sum /etc/X11/XF86Config-4 >/var/lib/xfree86/XF86Config-4.md5sum )
car d’après ton log, ces fonts n’existent pas.
Ensuite, d’après ton log, le driver Ati estime que ta carte est une Mach64, et il n’arrive pas à la détecter.
Tu devrais essayer avec le driver “radeon” plutôt qu’avec l’“ati”. Ça devrait résoudre le problème.

Thomas2 · Février 20, 2016, 12:44pm

Ok, j’ai commenté ‘cyrillic’ et ‘CID’ (d’accord, il faut supprimer les WWarnings, merci), et fait le md5 (tu le fais tjrs? pour savoir s’il y a eu une modif?)…

euh … j’ai beau chercher “debian changer de driver fglrx” sur G… je ne trouve que des tuto pour ‘installer’ les drivers … en compilant les sources du noyau et autres réjouissances … ça à l’air de pouvoir se faire en mode console, mais ça parait quand même un peu ardu…

avant d’en arriver là, y’a-t-il un moyen simple de changer le driver ‘ati’ en ‘radeon’ (ou même en ‘vesa’, ce serait déjà sympa) ??

Merci pour votre aide

Damsss · Février 20, 2016, 12:44pm

Le driver “radeon” est un driver générique. Ce n’est pas le driver “fglrx”. Il permettra d’utiliser toutes les applications 2D, mais ne feras pas d’accéleration 3D. Mais au moins, ça te dépanneras en attendant de mettre les mains dans le cambouis et d’essayer d’installer le driver fglrx. A noter que si tu as XF86, ça ne devrait pas poser de problème d’installer ce dernier (cf, le tuto dans la partie truc&astuce).
Donc, pour utiliser le driver radeon, tu n’as qu’à modifier le fichier XF86Config-4, où l’indiquer quand tu fais un dpkg-reconfigure xserver-xfree86.
Le md5sum est utile si tu modifie XF86Config-4 directement, car XFree le comparre avec le fichier XF86Config-4.md5sum.

Thomas2 · Février 20, 2016, 12:44pm

CA MARCHE

Merci beaucoup, ça fait du bien de passer en mode graphique…

Je me souvenais de mes premiers pas il y a longtemps en modifiant le XF86Config pour les résolutions, la “profondeur” de couleur, mais je n’avais absolument pas percuté qu’il fallait changer le nom du driver!!

Ca marche (ben oui, c normal, mais bon … j’étais un peu pas mal paumé quand même), donc plus tard je verrai pour “améliorer” les caractéristiques actuelles (passer en 1024, améliorer le rafraichissement) : ce qui m’étonne c’est qu’il n’a jamais pris mes “modifs” lors des install … enfin, c’est du passé…

merci pour le lien trucs et astuces, j’étais parti en attendant sur ces install de driver (http://clx.anet.fr/spip/article.php3?id_article=278 && http://www.pcinpact.com/forum/index.php?showtopic=20622) [d’ailleurs je vais leur signaler que la commande “dpkg -l | grep xserver-xfree86” ne fonctionne pas, car le “6” est tronqué à l’affichage, il faut faire “dpkg -l | grep xserver-xfree8”], mais j’ai du commencé par apt-get install …lynx !!

Et lynx plante sur la page d’ati pour charger les drivers

Au moins sur ton http://forum.debian-fr.org/viewtopic.php?t=1761 je ne serais plus bloqué par le téléchargement de l’installeur …

Encore merci à tous

ginkgo_biloba · Février 20, 2016, 12:44pm

Bonsoir,
On peut parfaitementement passer en 1024x768 avec un dpkg-reconfigure xserver-xfree86
Il suffit de cocher les résolutions désirées (et supportées par le matériel) quand le menu le demande. Il faut en général regarder en bas de la liste avec la flèche correspondante du pavé numérique car le haut de l’écran correspond aux hautes résolutions.

Damsss · Février 20, 2016, 12:44pm

Tu pourrais mettre un petit [résolu] sur le titre de ton premier message, ça serait sympa pour qu’on s’y retrouve. Pour les résolutions, on peut les modifiers dans le fichier de conf et faire le md5sum. C’est pas trés compliqué à comprendre ce fichier de conf. La résolution à ajouter serait donc 1024x768.

mattotop · Février 20, 2016, 12:44pm

J’ajouterais qu’à la main on peut aussi prendre des résolutions aussi biscornues qu’on veut, et que j’ai fait un “trucs et astuces” à ce sujet.

Thomas2 · Février 20, 2016, 12:44pm

Merci pour les précisions.

Je cherchais un bouton “afficher comme Résolu” hier soir

Je suis en train d’essayer dpkg-reconfigure (en root), mais j’ai du mal avec le bus de la carte … je crois que c’est affiché dans un des fichiers de log que j’ai copié ici, je vais chercher…

…dans l’immédiat je vais faire la modif à la main (ça je m’en souvenais, indiquer les résolution -par ligne de profondeur supportée je crois-, et les faire défiler sous X avec Ctr + Alt + Plus/Moins ), ça ira plus vite (mais j’irai au bout du dpkg après!!).

Ok, vu, les manip. biscornues, si j’en ai besoin, je sais où c’est … y’a plein d’autres T&A qui ont l’air sympa, cool

Et si je rencontre de nouveaux problèmes plus tard … je connais maintenant un forum super-sympa avec des gens super-aimables qui répondent super-vite

Thomas2 · Février 20, 2016, 12:45pm

Bonjour,

j’ai à nouveau perdu mon serveur X
Depuis quelques jours il me fallait rebooter pour que le signal (X était lancé, n’annonçait pas d’erreurs) “atteigne” l’écran (écran noir, sous tension qq secondes, puis en veille).

Là, j’ai un tout autre message (les deux ne sont p-ê pas liés) :

Je suis allé voir mon /etc/X11/X, il vaut :

lrwxrwxrwx   1 root root    20 2006-04-02 19:43 X -> /usr/bin/X11R6/bin/X

Ca me parait bizarre, X11R6, je n’avais pas ça avant. Effectivement, je n’ai aucun rép. X11R6 ou X11 ou X ds mon /usr/bin, par contre j’en ai ds /usr/X11R6/bin, qui vaut :

[quote]sr-sr-x 1 root root 9824 2005-09-15 22:10 X
[/quote]

Je pense qu’il y aeu un pb donc j’ai modifié le lien ds /etc/X11 en :

[quote]lrwxrwxrwx 1 root root 16 2006-04-02 21:31 X -> /usr/X11R6/bin/X
[/quote]

Là, j’obtiens ceci

P4D820:/var/log/gdm# cat :0.log GDM: Xserver not found: /usr/X11R6/bin/X :0 -audit 0 -auth /var/lib/gdm/:0.Xauth -nolisten tcp vt7 Error: Command could not be executed! Please install the X server or edit /etc/gdm/gdm.conf to point to the right place.

Précision : je suis en kernel amd64 mais en testing. Suite à la lecture d’un site semblant sympa http://lgl.epfl.ch/members/diclemen/tips_nux.html, j’ai voulu lancer la commande “apt-get dist-upgrade” (puisque je venais de passer en testing) … et là, bcp de packages se sont mis à jour

(mon source.list au passage :

[code]
#deb file:///cdrom/ sarge main

deb ftp://ftp.belnet.be/debian-amd64/debian/ testing main contrib
deb-src ftp://ftp.belnet.be/debian-amd64/debian/ testing main contrib

deb http://security.debian.org/ sarge/updates main contrib

Skype

deb http://download.skype.com/linux/repos/debian/ stable non-free

WINE

deb http://wine.sourceforge.net/apt/ binary/
deb-src http://wine.sourceforge.net/apt/ so[/code])

Voilà aussi mon log du serveur X :

[code]
XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-14sarge1 20050915192417 root@bester
.farm.ftbfs.de)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.6.11.6-vs195-farm1.0 x86_64 [ELF]
Build Date: 15 September 2005

This version of XFree86 has been extensively modified by the Debian
Project, and is not supported by the XFree86 Project, Inc., in any
way. Bugs should be reported to the Debian Bug Tracking System; see
<URL: http://www.debian.org/Bugs/Reporting >.

We strongly encourage the use of the “reportbug” package and command
to ensure that bug reports contain as much useful information as
possible.

Before filing a bug report, you may want to consult the Debian X FAQ:
XHTML version: file:///usr/share/doc/xfree86-common/FAQ.xhtml
plain text version: file:///usr/share/doc/xfree86-common/FAQ.gz

Module Loader present
OS Kernel: Linux version 2.6.8-12-em64t-p4-smp (root@dl385) (gcc version 3.4.4 2
0050314 (prerelease) (Debian 3.4.3-13)) #1 SMP Thu Feb 9 07:18:39 UTC 2006
Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/XFree86.0.log”, Time: Sun Apr 2 15:02:41 2006
(==) Using config file: “/etc/X11/XF86Config-4”
(==) ServerLayout “Default Layout”
() |–>Screen “Default Screen” (0)
() | |–>Monitor “Écran générique”
() | |–>Device “Carte vidéo générique”
() |–>Input Device “Generic Keyboard”
() Option “XkbRules” “xfree86”
() XKB: rules: “xfree86”
() Option “XkbModel” “pc105”
() XKB: model: “pc105”
() Option “XkbLayout” “fr”
() XKB: layout: “fr”
(==) Keyboard: CustomKeycode disabled
() |–>Input Device “Configured Mouse”
(**) FontPath set to “unix/:7100,/usr/lib/X11/fonts/misc,/usr/lib/X11/fonts/100d
pi/:unscaled,/usr/lib/X11/fonts/75dpi/:unscaled,/usr/lib/X11/fonts/Type1,/usr/li
b/X11/fonts/Speedo,/usr/lib/X11/fonts/100dpi,/usr/lib/X11/fonts/75dpi”
(==) RgbPath set to “/usr/X11R6/lib/X11/rgb”
(==) ModulePath set to “/usr/X11R6/lib/modules”
(++) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: “bitmap”
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: “pcidata”
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000003c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,0308 card 1849,0308 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 1106,1308 card 1849,1308 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:2: chip 1106,2308 card 1849,2308 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:3: chip 1106,3208 card 0000,0000 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:4: chip 1106,4308 card 1849,4308 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:00:5: chip 1106,5308 card 1849,5308 rev 00 class 08,00,20 hdr 80
(II) PCI: 00:00:7: chip 1106,7308 card 1849,7308 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b198 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:0f:0: chip 1106,3149 card 1849,3149 rev 80 class 01,01,8f hdr 80
(II) PCI: 00:0f:1: chip 1106,0571 card 1849,0571 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1849,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1849,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1849,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3038 card 1849,3038 rev 81 class 0c,03,00 hdr 80
(II) PCI: 00:10:4: chip 1106,3104 card 1849,3104 rev 86 class 0c,03,20 hdr 80
(II) PCI: 00:11:0: chip 1106,3227 card 1849,4227 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:5: chip 1106,3059 card 1849,0850 rev 60 class 04,01,00 hdr 00
(II) PCI: 00:12:0: chip 1106,3065 card 1849,3065 rev 78 class 02,00,00 hdr 00
(II) PCI: 01:00:0: chip 1002,5960 card 1043,004c rev 01 class 03,00,00 hdr 80
(II) PCI: 01:00:1: chip 1002,5940 card 1043,004d rev 01 class 03,80,00 hdr 00

Je n’arrive pas à copier / coller les écrans depuis putty ni à monter le lecteur de disquettes, donc je n’ai que le début et la fin
:oops:

    [16] 0  0       0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
    [17] 0  0       0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
    [18] 0  0       0x0000c000 - 0x0000c0ff (0x100) IX[B]
    [19] -1 0       0x0000ffff - 0x0000ffff (0x1) IX[B]
    [20] -1 0       0x00000000 - 0x000000ff (0x100) IX[B]
    [21] -1 0       0x0000e800 - 0x0000e8ff (0x100) IX[B]
    [22] -1 0       0x0000e400 - 0x0000e4ff (0x100) IX[B]
    [23] -1 0       0x0000dc00 - 0x0000dc1f (0x20) IX[B]
    [24] -1 0       0x0000e000 - 0x0000e01f (0x20) IX[B]
    [25] -1 0       0x0000e080 - 0x0000e09f (0x20) IX[B]
    [26] -1 0       0x0000ec00 - 0x0000ec1f (0x20) IX[B]
    [27] -1 0       0x0000fc00 - 0x0000fc0f (0x10) IX[B]
    [28] -1 0       0x0000ee00 - 0x0000eeff (0x100) IX[B]
    [29] -1 0       0x0000d080 - 0x0000d08f (0x10) IX[B]
    [30] -1 0       0x0000d400 - 0x0000d403 (0x4) IX[B]
    [31] -1 0       0x0000d480 - 0x0000d487 (0x8) IX[B]
    [32] -1 0       0x0000d800 - 0x0000d803 (0x4) IX[B]
    [33] -1 0       0x0000d880 - 0x0000d887 (0x8) IX[B]
    [34] -1 0       0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
    [35] 0  0       0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [36] 0  0       0x000003c0 - 0x000003df (0x20) IS[B](OprU)

(==) RADEON(0): Write-combining range (0xd0000000,0x8000000)
(II) RADEON(0): Wrote: rd=12, fd=140, pd=2
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmGetBusid returned ‘’
(II) RADEON(0): [drm] created “radeon” driver at busid “PCI:1:0:0”
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xffffff00103da000
(II) RADEON(0): [drm] mapped SAREA 0xffffff00103da000 to 0x2a9dc5f000
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(WW) RADEON(0): [agp] AGP not available
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xffffff00103da000 at 0x2a9dc5f000
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,768) to (1024,770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7421
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7417
() Option “dpms”
() RADEON(0): DPMS enabled
(II) RADEON(0): Direct rendering disabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Keyboard “Generic Keyboard” handled by legacy driver
() Option “Protocol” “ImPS/2”
() Configured Mouse: Protocol: “ImPS/2”
() Option “CorePointer”
() Configured Mouse: Core Pointer
() Option “Device” “/dev/input/mice”
() Option “Emulate3Buttons” “true”
() Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
() Option “ZAxisMapping” “4 5”
() Configured Mouse: ZAxisMapping: buttons 4 and 5
() Configured Mouse: Buttons: 5
(II) XINPUT: Adding extended input device “Configured Mouse” (type: MOUSE)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Warning: font renderer for “.pcf” already registered at priority 0
Warning: font renderer for “.pcf.Z” already registered at priority 0
Warning: font renderer for “.pcf.gz” already registered at priority 0
Warning: font renderer for “.snf” already registered at priority 0
Warning: font renderer for “.snf.Z” already registered at priority 0
Warning: font renderer for “.snf.gz” already registered at priority 0
Warning: font renderer for “.bdf” already registered at priority 0
Warning: font renderer for “.bdf.Z” already registered at priority 0
Warning: font renderer for “.bdf.gz” already registered at priority 0
Warning: font renderer for “.pmf” already registered at priority 0
Could not init font path element unix/:7100, removing from list!
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
SetGrabKeysState - disabled
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
GetModeLine - scrn: 0 clock: 78800
GetModeLine - hdsp: 1024 hbeg: 1040 hend: 1136 httl: 1312
vdsp: 768 vbeg: 769 vend: 772 vttl: 800 flags: 5
SetGrabKeysState - enabled
(II) RADEON(0): Wrote: rd=12, fd=101, pd=3
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(==) RADEON(0): Write-combining range (0xd0000000,0x8000000)
(II) RADEON(0): Wrote: rd=12, fd=140, pd=2
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 5, (OK)
drmGetBusid returned ‘’
(II) RADEON(0): [drm] created “radeon” driver at busid “PCI:1:0:0”
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xffffff00103da000
(II) RADEON(0): [drm] mapped SAREA 0xffffff00103da000 to 0x2a9dc5f000
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(WW) RADEON(0): [agp] AGP not available
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xffffff00103da000 at 0x2a9dc5f000
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,768) to (1024,770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7421
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): Using hardware cursor (scanline 770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7417
(**) RADEON(0): DPMS enabled
(II) RADEON(0): Direct rendering disabled
(==) RandR enabled
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element unix/:7100, removing from list!
Could not init font path element /usr/lib/X11/fonts/misc, removing from list!
Could not init font path element /usr/lib/X11/fonts/100dpi/:unscaled, removing from list!
Could not init font path element /usr/lib/X11/fonts/75dpi/:unscaled, removing from list!
Could not init font path element /usr/lib/X11/fonts/Type1, removing from list!
Could not init font path element /usr/lib/X11/fonts/Speedo, removing from list!
Could not init font path element /usr/lib/X11/fonts/100dpi, removing from list!
Could not init font path element /usr/lib/X11/fonts/75dpi, removing from list!

Fatal server error:
could not open default font ‘fixed’;
the X server’s font paths might be misconfigured, remote font server(s)
may be unreachable, and/or local fonts may not be installed or are not
configured correctly.

People inexperienced with the X Window System should have either the
"x-window-system" or “x-window-system-core” packages installed.

apt-get install x-window-system-core

apt-get install x-window-system

Other useful commands to run include:
$ dpkg --status xserver-common
$ dpkg --status xfonts-base
$ zmore /usr/share/doc/xfree86-common/FAQ.gz

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file “/var/log/XFree86.0.log”.
Please report problems to submit@bugs.debian.org.

(II) RADEON(0): Wrote: rd=12, fd=101, pd=3
[/code]

Voilà ou j’en suis … je crois que je suis bon pour réinstaller au moins le serveur X (j’ai aussi fait un dpkg -reconfigure xserver-common, snas résultats)… si qq’un a une idée, elle est la TRES bienvenue

goldyfruit · Février 20, 2016, 12:45pm

Et avec un :

Ca donne quoi ?

Thomas2 · Février 20, 2016, 12:45pm

Ouaou!!

Plus vite que lucky luke? J’avais même pas fini d’écrire…?

donc j’ai lancé la commande, il m’a annoncé qu’il allait libéré 1247 Mo sur le disque, résultat ds qq minutes…

Thomas2 · Février 20, 2016, 12:45pm

Et au reboot ça donne :
aucune commande ne parvient à lancer le serveur X (X, startx, xdm, gdm, kdm, kdestart)
Effectivement je n’ai plus de X ds /usr/X11R6/bin…

bon, ça commence à sentir le roussi je crois

Est-ce que mes pb de config testing/unstable/amd64-p4-emt64/apt-get dist-upgrade peuvent être en cause?

goldyfruit · Février 20, 2016, 12:45pm

Lors du dist-upgrade il a bien installé tout les paquets ?

Thomas2 · Février 20, 2016, 12:45pm

non, exact, je ne crois pas. De mémoire, ça s’était mal passé, il avait rencontré des pbs (comme sur beaucoup des commandes de maj que je lance) … je ne sais pas s’il y a un log où je peux voir ça?