En théorie wicd remplace network manager… mais vu ton problème. …
Oh, je vous remercie, je vous souhaite également de réussir
Je n’arrive pas à installer WICD
J’ai un fichier tar.gz que je décompresse.
Mais il n’y a pas d’"exe"
Je n’arrive à l’installer depuis synaptic
Il faut apparemment python que je n’arrive pas à installer.
Pfff ce n’est pas normal de galérer sur un pauvre pc de ce type.
Il y a forcement un autre problème et une autre solution
Dans debian on installe JAMAIS en décompressant des archives !
Pour installer un programme, il faut utiliser apt-get ou aptitude, dpkg, etc…jamais avec autre chose. (sauf si le programme n’existe pas autrement) Pourquoi ? parce qu’il gère les dépendances.
Le plus simple… c’est que tu te graves les DVD complets de ta distrib… le temps d’avoir ton interface USB/Ethernet. Parce que sinon, tu vas devoir chercher les paquets dépendants 1 par 1…
Ensuite, il faudra ajouter tes DVD aux dépots dans /etc/apt/sources.list.
Ensuite apt-get update (pour mettre à jour la liste des paquets disponibles)
puis, apt-get install lenomduprogramme
Hello
Je n’ai pas encore commandé la pièce et je viens d’en voir sur LEBONCOIN.
Il n’y a vraiment pas d’autre solution pour que je puisse avoir internet?
C’est donc logiciel.
Problème de driver? de carte? de mint?
Je n’ai jamais eu de problème de ce type sur du filaire surtout.
Là comme ça, j’ai pas plus d’idée…
[quote]C’est donc logiciel.
Problème de driver? de carte? de mint?[/quote]
aucune idée… le soucis avec ce problème, c’est que pour appliquer les solutions qu’on te propose, il faut internet pour être efficace…
On peut pas te dire, quel paquet installer un à un… car c’est trop long, car on ne sait pas ce qui est déjà installé, car tu n’es pas sur une vrai debian, que sur un forum ou chaqun à ses occupations à coté…
Il y a un début à tout… se sera de plus en plus fréquent, puisque debian veut séparer les parties non libres.
Essaye un live CD ubuntu récent, si y a pas d’ethernet… c’est que tu as un gros problème… Si ça marche, tu pourras peut être voir comment il fonctionne pour reproduire sur Mint.
Et comme je te l’ai dit plus haut, si tu graves la distrib complète, tu aurras tous les paquets à disposition, et ce sera plus simple… Faut il encore que ta distrib ait les ISO de la distrib complète
Personne ne semble avoir relevé ceci :
[mono]RX packets:0 errors:35 dropped:0 overruns:0 frame:35[/mono]
Il y a des erreurs de format lors de la réception des trames Ethernet. La dernière fois que j’ai eu ça, la carte réseau était défectueuse.
Lorsque j’ai récupéré l’ordinateur (sous xp) , je n’ai pas vérifié si la carte réseau fonctionnait.
Et l’utilisateur ne m’a rien dit dans ce sens.
Je vais essayer avec un livecd ubuntu pour voir ou même faire une installation complète.
Je vous fais un retour dès que possible.
Hello à tous
J’ai installé une version de UBUNTU et pas mieux…
Je vais commander ce connecteur (trouvé sur leboncoin à 3,20€ frais de port inclu).
Je vous recontacte dès réception ou j’arriverai en me débrouiller avec internet.
Bonne soirée
Bonsoir à tous
Bonsoir Vohu
J’ai reçu la clé usb/rj45.
Et après ?
J’ai toujours un problème de démarrage , écran noir, je vois le pointeur de la souris.
Je suis obligé de démarrer en mode startx ou en mode recovery.
Merci
Je suppose que tu as pu installer avec donc ?
Bien ensuite, tu dis pas assez d’info pour t’aider…
Si tu as un curseur sur un fond noir, c’est que tu n’as pas installé correctement ton environnement graphique…
Une petite question : pourquoi tu as choisi mint ?
Bonsoir VOhu
Alors tout d’abord j’ai installé UBUNTU en remplacement de MINT.
Mais même défaut de connexion internet.
Mais depuis quelques jours, je n’ai qu’un écran noir et le curseur souris visible.
J’arrive à passer en mode root en recovery mode. Mais de là toujours pas d’internet.
J’ai essayé de faire des manip avec la clé usb/rj45 mais pas d’amélioration.
J’ai un changement lorsque je fais ifconfig -a:
J’ai eth0 et aussi un eth1.
Pourquoi MINT au départ: Produit stable sur deux autres PC (qui tournaient sous XP avant , config trop pauvre pour passer en windows supérieur)
J’ai UBUNTU sur un PC PORTABLE perso et j’en suis très content par rapport à mon besoin.
On m’a présenté MINT et j’avoue que pour les besoins que 80 % des gens utilisent sur leur ordi perso et familliaux, cela va très bien: internet, un peu de traitement de texte/ comptabilité simple qu’ils ne diffusent pas.
Donc gratuit , stable, simple, adapté à leur besoin.
Que me proposes tu en remplacement?
Est ce qu’une installation DEBIAN est équivalente? Qu’est ce que DEBIAN par rapport à MINT et UBUNTU?
ok, oui, c’est sûr que personnellement, je trouve debian bien mieux…
Mais c’est pas ça qui résoudra ton problème…
Alors, une fois la console ouverte, tu te mets en root. et tu lances : dhclient eth1 -v
Donne ici le résultat
Re
Bon alors je ne comprends pas ce qu’il se passe. J’avais laisser l’écran noir et maintenant il a démarré correctement et j’ai internet.
Mais le mot de passe que j’avais mis ne correspond lorsque je veux passer en mode su.
Je l’avais pourtant noté.J’ai essayé celui de la session (alors que j’avais configuré sans mot de passe pour la session.
Bon , tu vas me dire que c’est un moindre mal par rapport à l’état précédent.
J’essaie de retrouver mon mot de passe pour passer en mode su mais c’est étonnant qu’il ne fonctionne pas . J’ai aussi essayé en mode qwerty mais idem
Soit ton clavier est en QUERTY soit il l’était au moment de l’enregistrement du mot de passe
Pourtant j’ai essayé les deux.
Je suis en train de redémarrer mais c’est long.
Il reste longtemps sur le logo UBUNTU et il est dans des couleurs douteuses (vert genre monochrome).
Et maintenant je retombe sur l’écran noir et la souris. Pfff je ne sais pas combien il faut de temps pour avoir le lancement de l’OS.
Pas normal pas normal , moi qui prône la vitesse de démarrage de linux.
Est ce qu’une installation DEBIAN serait adaptée pour ce genre de pc?
Peut être revenir sous MINT Maintenant que je peux avoir de l’internet et faire les manip pour l’avoir sur le port RJ45 de la carte réseau , non?
ton problème d’écran noir c’est qu’un problème de config… Soit un mauvais pilote, soit un mauvais fichier xorg.conf
démarre en mode vesa pour voir déja.
Une fois en mode vesa, tu envoies les résultats de :
lspci
lspci -v
uname -a
lsmod
dmesg
et du fichier /var/log/Xorg.0.log
mode vesa?
Oui ou mode root ou recorvery, au démarrage tu choisis la 2ème option
Je ne sais pas si cela va être lisible:
lspci
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01)
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01)
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV370 [Radeon X300]
01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV370 [Radeon X300 SE]
03:03.0 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI (rev 04)
03:08.0 Ethernet controller: Intel Corporation NM10/ICH7 Family LAN Controller (rev 01)
lspci -v
00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
Subsystem: Dell Device 01d2
Flags: bus master, fast devsel, latency 0
Capabilities:
00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: efd00000-efefffff
Prefetchable memory behind bridge: 00000000ec000000-00000000edffffff
Capabilities:
Kernel driver in use: pcieport
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
Subsystem: Dell Device 01d2
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at efffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities:
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: efc00000-efcfffff
Prefetchable memory behind bridge: 0000000020000000-00000000201fffff
Capabilities:
Kernel driver in use: pcieport
00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device 01d2
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at ff80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device 01d2
Flags: bus master, medium devsel, latency 0, IRQ 22
I/O ports at ff60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device 01d2
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at ff40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device 01d2
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at ff20 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Device 01d2
Flags: bus master, medium devsel, latency 0, IRQ 21
Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities:
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: efb00000-efbfffff
Capabilities:
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
Flags: bus master, medium devsel, latency 0
Capabilities:
Kernel driver in use: lpc_ich
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device 01d2
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 01f0 [size=8]
I/O ports at 03f4
I/O ports at 0170 [size=8]
I/O ports at 0374
I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface: Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device 01d2
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
I/O ports at fe00 [size=8]
I/O ports at fe10 [size=4]
I/O ports at fe20 [size=8]
I/O ports at fe30 [size=4]
I/O ports at fea0 [size=16]
Memory at 20200000 (32-bit, non-prefetchable) [size=1K]
Capabilities:
Kernel driver in use: ata_piix
00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 01)
Subsystem: Dell Device 01d2
Flags: medium devsel, IRQ 9
I/O ports at ece0 [size=32]
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV370 [Radeon X300] (prog-if 00 [VGA controller])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0602
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at ec000000 (64-bit, prefetchable) [size=32M]
Memory at efde0000 (64-bit, non-prefetchable) [size=64K]
I/O ports at dc00 [size=256]
Expansion ROM at efe00000 [disabled] [size=128K]
Capabilities:
01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV370 [Radeon X300 SE]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device 0603
Flags: bus master, fast devsel, latency 0
Memory at efdf0000 (64-bit, non-prefetchable) [size=64K]
Capabilities:
03:03.0 Modem: Intel Corporation FA82537EP 56K V.92 Data/Fax Modem PCI (rev 04) (prog-if 00 [Generic])
Subsystem: Dell Device 1000
Flags: bus master, stepping, medium devsel, latency 64, IRQ 19
Memory at efbfe000 (32-bit, non-prefetchable) [size=4K]
I/O ports at cc00 [size=256]
Capabilities:
Kernel driver in use: serial
03:08.0 Ethernet controller: Intel Corporation NM10/ICH7 Family LAN Controller (rev 01)
Subsystem: Dell Device 01ab
Flags: bus master, medium devsel, latency 64, IRQ 20
Memory at efbff000 (32-bit, non-prefetchable) [size=4K]
I/O ports at c8c0 [size=64]
Capabilities:
Kernel driver in use: e100
uname -a
Linux famille-Dell-DM051 3.13.0-24-generic #46-Ubuntu SMP Thu Apr 10 19:08:14 UTC 2014 i686 i686 i686 GNU/Linux
lsmod
Module Size Used by
nls_iso8859_1 12617 1
sr9700 13514 0
dm9601 13546 0
usbnet 37837 2 dm9601,sr9700
bnep 18895 2
rfcomm 53664 0
bluetooth 342263 10 bnep,rfcomm
parport_pc 31981 0
ppdev 17391 0
lp 13299 0
parport 40836 3 lp,ppdev,parport_pc
btrfs 822702 0
raid6_pq 97455 1 btrfs
xor 26221 1 btrfs
ufs 73656 0
qnx4 13101 0
hfsplus 93447 0
hfs 49390 0
minix 31317 0
ntfs 95723 0
msdos 17093 0
jfs 170009 0
xfs 802883 0
libcrc32c 12543 2 xfs,btrfs
hid_generic 12492 0
usbhid 47035 0
hid 87604 2 hid_generic,usbhid
snd_hda_codec_idt 48877 1
snd_hda_intel 42730 3
snd_hda_codec 164067 2 snd_hda_codec_idt,snd_hda_intel
snd_hwdep 13272 1 snd_hda_codec
radeon 1416373 0
snd_pcm 85501 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 14230 2 snd_pcm,snd_hda_intel
snd_seq_midi 13132 0
gpio_ich 13229 0
snd_seq_midi_event 14475 1 snd_seq_midi
snd_rawmidi 25135 1 snd_seq_midi
snd_seq 55383 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 14137 3 snd_seq,snd_rawmidi,snd_seq_midi
snd_timer 28584 2 snd_pcm,snd_seq
snd 60871 16 snd_hwdep,snd_timer,snd_hda_codec_idt,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi
ttm 72698 1 radeon
drm_kms_helper 46907 1 radeon
dcdbas 14448 0
drm 243792 3 ttm,drm_kms_helper,radeon
psmouse 91033 0
soundcore 12600 1 snd
serio_raw 13230 0
i2c_algo_bit 13197 1 radeon
lpc_ich 16864 0
mac_hid 13037 0
usb_storage 48417 1
e100 35945 0
mii 13654 4 e100,dm9601,sr9700,usbnet
[ 0.480166] system 00:06: [io 0x04d2-0x057f] has been reserved
[ 0.480212] system 00:06: [io 0x0580-0x0677] has been reserved
[ 0.480255] system 00:06: [io 0x0680-0x0777] has been reserved
[ 0.480298] system 00:06: [io 0x0780-0x07bb] has been reserved
[ 0.480342] system 00:06: [io 0x07c0-0x07ff] has been reserved
[ 0.480385] system 00:06: [io 0x08e0-0x08ff] has been reserved
[ 0.480428] system 00:06: [io 0x0900-0x09fe] has been reserved
[ 0.480471] system 00:06: [io 0x0a00-0x0afe] has been reserved
[ 0.480515] system 00:06: [io 0x0b00-0x0bfe] has been reserved
[ 0.480558] system 00:06: [io 0x0c80-0x0caf] has been reserved
[ 0.480601] system 00:06: [io 0x0cb0-0x0cbf] has been reserved
[ 0.480645] system 00:06: [io 0x0cc0-0x0cf7] has been reserved
[ 0.480688] system 00:06: [io 0x0d00-0x0dfe] has been reserved
[ 0.480731] system 00:06: [io 0x0e00-0x0efe] has been reserved
[ 0.480774] system 00:06: [io 0x0f00-0x0ffe] has been reserved
[ 0.480818] system 00:06: [io 0x2000-0x20fe] has been reserved
[ 0.480861] system 00:06: [io 0x2100-0x21fe] has been reserved
[ 0.480905] system 00:06: [io 0x2200-0x22fe] has been reserved
[ 0.480948] system 00:06: [io 0x2300-0x23fe] has been reserved
[ 0.480991] system 00:06: [io 0x2400-0x24fe] has been reserved
[ 0.481035] system 00:06: [io 0x2500-0x25fe] has been reserved
[ 0.481081] system 00:06: [io 0x2600-0x26fe] has been reserved
[ 0.481125] system 00:06: [io 0x2700-0x27fe] has been reserved
[ 0.481169] system 00:06: [io 0x2800-0x28fe] has been reserved
[ 0.481212] system 00:06: [io 0x2900-0x29fe] has been reserved
[ 0.481255] system 00:06: [io 0x2a00-0x2afe] has been reserved
[ 0.481299] system 00:06: [io 0x2b00-0x2bfe] has been reserved
[ 0.481342] system 00:06: [io 0x2c00-0x2cfe] has been reserved
[ 0.481385] system 00:06: [io 0x2d00-0x2dfe] has been reserved
[ 0.481429] system 00:06: [io 0x2e00-0x2efe] has been reserved
[ 0.481472] system 00:06: [io 0x2f00-0x2ffe] has been reserved
[ 0.481515] system 00:06: [io 0x5000-0x50fe] has been reserved
[ 0.481559] system 00:06: [io 0x5100-0x51fe] has been reserved
[ 0.481602] system 00:06: [io 0x5200-0x52fe] has been reserved
[ 0.481646] system 00:06: [io 0x5300-0x53fe] has been reserved
[ 0.481689] system 00:06: [io 0x5400-0x54fe] has been reserved
[ 0.481733] system 00:06: [io 0x5500-0x55fe] has been reserved
[ 0.481776] system 00:06: [io 0x5600-0x56fe] has been reserved
[ 0.481820] system 00:06: [io 0x5700-0x57fe] has been reserved
[ 0.481863] system 00:06: [io 0x5800-0x58fe] has been reserved
[ 0.481907] system 00:06: [io 0x5900-0x59fe] has been reserved
[ 0.481950] system 00:06: [io 0x5a00-0x5afe] has been reserved
[ 0.481994] system 00:06: [io 0x5b00-0x5bfe] has been reserved
[ 0.482037] system 00:06: [io 0x5c00-0x5cfe] has been reserved
[ 0.482081] system 00:06: [io 0x5d00-0x5dfe] has been reserved
[ 0.482124] system 00:06: [io 0x5e00-0x5efe] has been reserved
[ 0.482168] system 00:06: [io 0x5f00-0x5ffe] has been reserved
[ 0.482212] system 00:06: [io 0x6000-0x60fe] has been reserved
[ 0.482255] system 00:06: [io 0x6100-0x61fe] has been reserved
[ 0.482299] system 00:06: [io 0x6200-0x62fe] has been reserved
[ 0.482343] system 00:06: [io 0x6300-0x63fe] has been reserved
[ 0.482387] system 00:06: [io 0x6400-0x64fe] has been reserved
[ 0.482430] system 00:06: [io 0x6500-0x65fe] has been reserved
[ 0.482474] system 00:06: [io 0x6600-0x66fe] has been reserved
[ 0.482518] system 00:06: [io 0x6700-0x67fe] has been reserved
[ 0.482562] system 00:06: [io 0x6800-0x68fe] has been reserved
[ 0.482606] system 00:06: [io 0x6900-0x69fe] has been reserved
[ 0.482649] system 00:06: [io 0x6a00-0x6afe] has been reserved
[ 0.482693] system 00:06: [io 0x6b00-0x6bfe] has been reserved
[ 0.482737] system 00:06: [io 0x6c00-0x6cfe] has been reserved
[ 0.482781] system 00:06: [io 0x6d00-0x6dfe] has been reserved
[ 0.482825] system 00:06: [io 0x6e00-0x6efe] has been reserved
[ 0.482869] system 00:06: [io 0x6f00-0x6ffe] has been reserved
[ 0.482913] system 00:06: [io 0xa000-0xa0fe] has been reserved
[ 0.482958] system 00:06: [io 0xa100-0xa1fe] has been reserved
[ 0.483004] system 00:06: [io 0xa200-0xa2fe] has been reserved
[ 0.483049] system 00:06: [io 0xa300-0xa3fe] has been reserved
[ 0.483093] system 00:06: [io 0xa400-0xa4fe] has been reserved
[ 0.483137] system 00:06: [io 0xa500-0xa5fe] has been reserved
[ 0.483182] system 00:06: [io 0xa600-0xa6fe] has been reserved
[ 0.483226] system 00:06: [io 0xa700-0xa7fe] has been reserved
[ 0.483270] system 00:06: [io 0xa800-0xa8fe] has been reserved
[ 0.483315] system 00:06: [io 0xa900-0xa9fe] has been reserved
[ 0.483359] system 00:06: [io 0xaa00-0xaafe] has been reserved
[ 0.483404] system 00:06: [io 0xab00-0xabfe] has been reserved
[ 0.483448] system 00:06: [io 0xac00-0xacfe] has been reserved
[ 0.483493] system 00:06: [io 0xad00-0xadfe] has been reserved
[ 0.483537] system 00:06: [io 0xae00-0xaefe] has been reserved
[ 0.483582] system 00:06: [io 0xaf00-0xaffe] has been reserved
[ 0.483626] system 00:06: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.483670] system 00:06: [mem 0xfeda0000-0xfedacfff] has been reserved
[ 0.483716] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.483726] pnp: PnP ACPI: found 7 devices
[ 0.483767] ACPI: bus type PNP unregistered
[ 0.483810] PnPBIOS: Disabled by ACPI PNP
[ 0.522083] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.522091] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.522106] pci 0000:00:1f.0: BAR 13: [io 0x0800-0x087f] has bogus alignment
[ 0.522154] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.522159] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.522167] pci 0000:00:1c.0: BAR 15: assigned [mem 0x20000000-0x201fffff 64bit pref]
[ 0.522220] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.522265] pci 0000:00:1f.2: BAR 5: assigned [mem 0x20200000-0x202003ff]
[ 0.522973] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.523016] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
[ 0.523062] pci 0000:00:01.0: bridge window [mem 0xefd00000-0xefefffff]
[ 0.523108] pci 0000:00:01.0: bridge window [mem 0xec000000-0xedffffff 64bit pref]
[ 0.523161] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.523205] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.523251] pci 0000:00:1c.0: bridge window [mem 0xefc00000-0xefcfffff]
[ 0.523297] pci 0000:00:1c.0: bridge window [mem 0x20000000-0x201fffff 64bit pref]
[ 0.523352] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 0.523396] pci 0000:00:1e.0: bridge window [io 0xc000-0xcfff]
[ 0.523442] pci 0000:00:1e.0: bridge window [mem 0xefb00000-0xefbfffff]
[ 0.523494] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.523498] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.523501] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.523505] pci_bus 0000:01: resource 1 [mem 0xefd00000-0xefefffff]
[ 0.523508] pci_bus 0000:01: resource 2 [mem 0xec000000-0xedffffff 64bit pref]
[ 0.523512] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.523515] pci_bus 0000:02: resource 1 [mem 0xefc00000-0xefcfffff]
[ 0.523518] pci_bus 0000:02: resource 2 [mem 0x20000000-0x201fffff 64bit pref]
[ 0.523522] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.523525] pci_bus 0000:03: resource 1 [mem 0xefb00000-0xefbfffff]
[ 0.523528] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.523532] pci_bus 0000:03: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.523581] NET: Registered protocol family 2
[ 0.523835] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.523892] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.523952] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.524024] TCP: reno registered
[ 0.524066] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.524113] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.524231] NET: Registered protocol family 1
[ 0.527492] pci 0000:01:00.0: Boot video device
[ 0.527513] pci 0000:03:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.527567] PCI: CLS 64 bytes, default 64
[ 0.527648] Trying to unpack rootfs image as initramfs…
[ 1.000656] Freeing initrd memory: 18172K (dddf7000 - defb6000)
[ 1.000807] Simple Boot Flag at 0x7a set to 0x1
[ 1.001001] microcode: CPU0 sig=0xf43, pf=0x10, revision=0x5
[ 1.001052] microcode: CPU1 sig=0xf43, pf=0x10, revision=0x5
[ 1.001191] microcode: Microcode Update Driver: v2.00 tigran@aivazian.fsnet.co.uk, Peter Oruba
[ 1.001244] Scanning for low memory corruption every 60 seconds
[ 1.001671] Initialise system trusted keyring
[ 1.001772] audit: initializing netlink socket (disabled)
[ 1.001832] type=2000 audit(1409689271.000:1): initialized
[ 1.029915] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.031922] VFS: Disk quotas dquot_6.5.2
[ 1.032050] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.032816] fuse init (API version 7.22)
[ 1.032992] msgmni has been set to 985
[ 1.033121] Key type big_key registered
[ 1.033829] Key type asymmetric registered
[ 1.033874] Asymmetric key parser ‘x509’ registered
[ 1.033968] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.034070] io scheduler noop registered
[ 1.034115] io scheduler deadline registered (default)
[ 1.034197] io scheduler cfq registered
[ 1.034771] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 1.035170] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 1.035281] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.035350] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.035479] ipmi message handler version 39.2
[ 1.035605] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
[ 1.035661] ACPI: Power Button [VBTN]
[ 1.035772] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.035824] ACPI: Power Button [PWRF]
[ 1.036050] GHES: HEST is not enabled!
[ 1.036140] isapnp: Scanning for PnP cards…
[ 1.040081] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 1.043049] 0000:03:03.0: ttyS5 at I/O 0xcc08 (irq = 19, base_baud = 115200) is a 16450
[ 1.043268] 0000:03:03.0: ttyS6 at I/O 0xcc10 (irq = 19, base_baud = 115200) is a 8250
[ 1.043483] 0000:03:03.0: ttyS7 at I/O 0xcc18 (irq = 19, base_baud = 115200) is a 16450
[ 1.043696] 0000:03:03.0: ttyS8 at I/O 0xcc20 (irq = 19, base_baud = 115200) is a 8250
[ 1.043909] 0000:03:03.0: ttyS9 at I/O 0xcc28 (irq = 19, base_baud = 115200) is a 8250
[ 1.044991] 0000:03:03.0: ttyS16 at I/O 0xcc60 (irq = 19, base_baud = 115200) is a 8250
[ 1.047991] Linux agpgart interface v0.103
[ 1.050952] brd: module loaded
[ 1.052403] loop: module loaded
[ 1.052661] ata_piix 0000:00:1f.1: version 2.13
[ 1.056058] scsi0 : ata_piix
[ 1.056215] scsi1 : ata_piix
[ 1.056323] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.056370] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 1.056822] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.057120] ata2: port disabled–ignoring
[ 1.212515] scsi2 : ata_piix
[ 1.212653] scsi3 : ata_piix
[ 1.212772] ata3: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfea0 irq 20
[ 1.212820] ata4: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfea8 irq 20
[ 1.213521] libphy: Fixed MDIO Bus: probed
[ 1.213794] tun: Universal TUN/TAP device driver, 1.6
[ 1.213837] tun: © 1999-2004 Max Krasnyansky maxk@qualcomm.com
[ 1.213951] PPP generic driver version 2.4.2
[ 1.214062] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.214112] ehci-pci: EHCI PCI platform driver
[ 1.214593] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.214646] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 1.214714] ehci-pci 0000:00:1d.7: debug port 1
[ 1.218672] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.218727] ehci-pci 0000:00:1d.7: irq 21, io mem 0xffa80800
[ 1.228025] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.228171] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.228218] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.228271] usb usb1: Product: EHCI Host Controller
[ 1.228315] usb usb1: Manufacturer: Linux 3.13.0-24-generic ehci_hcd
[ 1.228361] usb usb1: SerialNumber: 0000:00:1d.7
[ 1.228588] hub 1-0:1.0: USB hub found
[ 1.228645] hub 1-0:1.0: 8 ports detected
[ 1.229045] ehci-platform: EHCI generic platform driver
[ 1.229105] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 1.229150] ohci-pci: OHCI PCI platform driver
[ 1.229214] ohci-platform: OHCI generic platform driver
[ 1.229270] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.229724] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.229775] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.229855] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
[ 1.229999] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.230047] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.230100] usb usb2: Product: UHCI Host Controller
[ 1.230144] usb usb2: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 1.230189] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.230397] hub 2-0:1.0: USB hub found
[ 1.230451] hub 2-0:1.0: 2 ports detected
[ 1.231030] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.231082] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 1.231175] uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
[ 1.231302] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.231350] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.231402] usb usb3: Product: UHCI Host Controller
[ 1.231446] usb usb3: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 1.231492] usb usb3: SerialNumber: 0000:00:1d.1
[ 1.231702] hub 3-0:1.0: USB hub found
[ 1.231755] hub 3-0:1.0: 2 ports detected
[ 1.232356] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.232408] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 1.232503] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[ 1.232640] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.232687] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.232740] usb usb4: Product: UHCI Host Controller
[ 1.232784] usb usb4: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 1.232829] usb usb4: SerialNumber: 0000:00:1d.2
[ 1.233039] hub 4-0:1.0: USB hub found
[ 1.233092] hub 4-0:1.0: 2 ports detected
[ 1.233670] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 1.233721] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 1.233818] uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
[ 1.233948] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.233995] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.234048] usb usb5: Product: UHCI Host Controller
[ 1.234093] usb usb5: Manufacturer: Linux 3.13.0-24-generic uhci_hcd
[ 1.234138] usb usb5: SerialNumber: 0000:00:1d.3
[ 1.234347] hub 5-0:1.0: USB hub found
[ 1.234400] hub 5-0:1.0: 2 ports detected
[ 1.234711] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.237704] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.237755] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.237992] mousedev: PS/2 mouse device common for all mice
[ 1.238250] rtc_cmos 00:04: RTC can wake from S4
[ 1.238438] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.238511] rtc_cmos 00:04: alarms up to one day, 242 bytes nvram, hpet irqs
[ 1.238682] device-mapper: uevent: version 1.0.3
[ 1.238826] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 1.238918] platform eisa.0: Probing EISA bus 0
[ 1.238965] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 1.239013] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 1.239059] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 1.239117] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 1.239164] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 1.239222] platform eisa.0: EISA: Detected 0 cards
[ 1.239273] cpufreq-nforce2: No nForce2 chipset.
[ 1.239320] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.239600] TCP: cubic registered
[ 1.239833] NET: Registered protocol family 10
[ 1.240227] NET: Registered protocol family 17
[ 1.240290] Key type dns_resolver registered
[ 1.240590] Using IPI No-Shortcut mode
[ 1.241432] Loading compiled-in X.509 certificates
[ 1.247525] Loaded X.509 cert ‘Magrathea: Glacier signing key: 77d70e1df42996dc92b01d759d3e8562ea32a1c7’
[ 1.247599] registered taskstats version 1
[ 1.251252] Key type trusted registered
[ 1.254547] Key type encrypted registered
[ 1.257813] AppArmor: AppArmor sha1 policy hashing enabled
[ 1.257861] IMA: No TPM chip found, activating TPM-bypass!
[ 1.258235] regulator-dummy: disabling
[ 1.258351] Magic number: 14:113:396
[ 1.258504] rtc_cmos 00:04: setting system clock to 2014-09-02 20:21:11 UTC (1409689271)
[ 1.258662] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.258708] EDD information not available.
[ 1.258818] PM: Hibernation image not present or could not be loaded.
[ 1.259678] ata1.00: ATAPI: HL-DT-ST DVD+/-RW GWA4164B, E113, max UDMA/33
[ 1.308292] ata1.00: configured for UDMA/33
[ 1.383153] ata3.00: ATA-7: WDC WD1600JS-75NCB1, 10.02E01, max UDMA/133
[ 1.383203] ata3.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32)
[ 1.388282] ata3.00: configured for UDMA/133
[ 1.390208] isapnp: No Plug & Play device found
[ 1.391891] scsi 0:0:0:0: CD-ROM HL-DT-ST DVD±RW GWA4164B E113 PQ: 0 ANSI: 5
[ 1.395180] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 1.395226] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.395438] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 1.395558] sr 0:0:0:0: Attached scsi generic sg0 type 5
[ 1.395830] scsi 2:0:0:0: Direct-Access ATA WDC WD1600JS-75N 10.0 PQ: 0 ANSI: 5
[ 1.396097] sd 2:0:0:0: [sda] 312500000 512-byte logical blocks: (160 GB/149 GiB)
[ 1.396159] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1.396323] sd 2:0:0:0: [sda] Write Protect is off
[ 1.396368] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.396429] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 1.451000] sda: sda1 sda2 < sda5 sda6 >
[ 1.451649] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.452280] Freeing unused kernel memory: 872K (c19ae000 - c1a88000)
[ 1.452386] Write protecting the kernel text: 6512k
[ 1.452546] Write protecting the kernel read-only data: 2756k
[ 1.452589] NX-protecting the kernel data: 5776k
[ 1.471459] systemd-udevd[102]: starting version 204
[ 1.556065] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 1.560844] e100: Intel® PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.560899] e100: Copyright© 1999-2006 Intel Corporation
[ 1.595680] e100 0000:03:08.0 eth0: addr 0xefbff000, irq 20, MAC addr 00:12:3f:ae:e5:fd
[ 1.746448] usb 1-3: New USB device found, idVendor=0644, idProduct=0200
[ 1.746501] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.746619] usb 1-3: Product: CA-200
[ 1.746662] usb 1-3: Manufacturer: TEAC
[ 1.746704] usb 1-3: SerialNumber: 000003004770
[ 2.000023] tsc: Refined TSC clocksource calibration: 3191.999 MHz
[ 2.050313] EXT4-fs (sda5): INFO: recovery required on readonly filesystem
[ 2.050362] EXT4-fs (sda5): write access will be enabled during recovery
[ 2.124180] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 2.124349] scsi4 : usb-storage 1-3:1.0
[ 2.124546] usbcore: registered new interface driver usb-storage
[ 2.212515] EXT4-fs (sda5): recovery complete
[ 2.219456] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 2.224066] usb 4-1: new low-speed USB device number 2 using uhci_hcd
[ 2.400055] usb 4-1: New USB device found, idVendor=046d, idProduct=c05a
[ 2.400106] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.400151] usb 4-1: Product: USB Optical Mouse
[ 2.400193] usb 4-1: Manufacturer: Logitech
[ 2.512049] usb 4-2: new low-speed USB device number 3 using uhci_hcd
[ 2.691050] usb 4-2: New USB device found, idVendor=046d, idProduct=c312
[ 2.691097] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.691143] usb 4-2: Product: USB Multimedia Keyboard
[ 2.691185] usb 4-2: Manufacturer: LITEON Technology
[ 2.774428] random: init urandom read with 95 bits of entropy available
[ 3.000108] Switched to clocksource tsc
[ 3.134478] scsi 4:0:0:0: Direct-Access TEAC USB HS-CF Card 4.08 PQ: 0 ANSI: 0
[ 3.138093] scsi 4:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.08 PQ: 0 ANSI: 0
[ 3.141840] scsi 4:0:0:2: Direct-Access TEAC USB HS-MS Card 4.08 PQ: 0 ANSI: 0
[ 3.145094] scsi 4:0:0:3: Direct-Access TEAC USB HS-SD Card 4.08 PQ: 0 ANSI: 0
[ 3.145512] sd 4:0:0:0: Attached scsi generic sg2 type 0
[ 3.145799] sd 4:0:0:1: Attached scsi generic sg3 type 0
[ 3.146067] sd 4:0:0:2: Attached scsi generic sg4 type 0
[ 3.146337] sd 4:0:0:3: Attached scsi generic sg5 type 0
[ 3.185334] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 3.189960] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 3.194456] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 3.198357] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 3.273315] random: nonblocking pool is initialized
[ 3.738120] systemd-udevd[213]: starting version 204
[ 4.315787] intel_rng: Firmware space is locked read-only. If you can’t or
[ 4.315787] intel_rng: don’t want to disable this in firmware setup, and if
[ 4.315787] intel_rng: you are certain that your system has a functional
[ 4.315787] intel_rng: RNG, try using the ‘no_fwh_detect’ option.
[ 4.436659] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \GLBC 1 (20131115/utaddress-251)
[ 4.436789] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \SACT 2 (20131115/utaddress-251)
[ 4.436938] ACPI Warning: 0x00000828-0x0000082f SystemIO conflicts with Region \SSTS 3 (20131115/utaddress-251)
[ 4.437068] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.437356] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.586606] leds_ss4200: no LED devices found
[ 4.591898] [drm] Initialized drm 1.1.0 20060810
[ 4.656922] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 5.226094] gpio_ich: GPIO from 206 to 255 on gpio_ich
[ 5.405244] [drm] VGACON disable radeon kernel modesetting.
[ 5.405294] [drm] radeon userspace modesetting enabled.
[ 5.406111] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.406162] [drm] No driver support for vblank timestamp query.
[ 5.406206] [drm] Initialized radeon 1.34.0 20080528 for 0000:01:00.0 on minor 0
[ 5.616774] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X
[ 5.696191] autoconfig: line_outs=3 (0xd/0xc/0xf/0x0/0x0) type:speaker
[ 5.696249] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 5.696298] hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 5.696348] mono: mono_out=0x0
[ 5.696394] inputs:
[ 5.696442] Front Mic=0xe
[ 5.696489] Rear Mic=0xb
[ 5.696537] Line=0x15
[ 5.712427] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 5.713098] input: HDA Intel Speaker CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 5.715247] input: HDA Intel Speaker Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 5.716143] input: HDA Intel Speaker Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 5.716676] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 5.717813] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 5.968376] hidraw: raw HID events driver © Jiri Kosina
[ 6.099614] usbcore: registered new interface driver usbhid
[ 6.099668] usbhid: USB HID core driver
[ 6.156631] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input11
[ 6.156943] hid-generic 0003:046D:C05A.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.2-1/input0
[ 6.158068] input: LITEON Technology USB Multimedia Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/input/input12
[ 6.158527] hid-generic 0003:046D:C312.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Multimedia Keyboard] on usb-0000:00:1d.2-2/input0
[ 7.313913] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.004550] Adding 1951740k swap on /dev/sda1. Priority:-1 extents:1 across:1951740k FS
[ 14.525747] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[ 14.775420] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 29.500004] mtrr: no MTRR for ec000000,1000000 found
[ 45.342148] mtrr: no MTRR for ec000000,1000000 found
[ 72.746544] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 72.785551] JFS: nTxBlock = 3950, nTxLock = 31602
[ 72.838898] NTFS driver 2.1.30 [Flags: R/O MODULE].
[ 72.910043] QNX4 filesystem 0.2.3 registered.
[ 72.957156] xor: measuring software checksum speed
[ 72.996013] pIII_sse : 4475.000 MB/sec
[ 73.036011] prefetch64-sse: 4521.000 MB/sec
[ 73.036017] xor: using function: prefetch64-sse (4521.000 MB/sec)
[ 73.116033] raid6: mmxx1 1963 MB/s
[ 73.184039] raid6: mmxx2 2285 MB/s
[ 73.252051] raid6: sse1x1 1170 MB/s
[ 73.320029] raid6: sse1x2 2254 MB/s
[ 73.388022] raid6: sse2x1 2362 MB/s
[ 73.456024] raid6: sse2x2 3333 MB/s
[ 73.456027] raid6: using algorithm sse2x2 (3333 MB/s)
[ 73.456030] raid6: using intx1 recovery algorithm
[ 73.547541] bio: create slab at 1
[ 73.551149] Btrfs loaded
[ 85.668852] mtrr: no MTRR for ec000000,1000000 found
[ 153.598151] mtrr: no MTRR for ec000000,1000000 found
[ 156.767294] init: plymouth-upstart-bridge main process (2654) terminated with status 1
[ 156.767332] init: plymouth-upstart-bridge main process ended, respawning
[ 156.852472] init: plymouth-upstart-bridge main process (2687) terminated with status 1
[ 156.852504] init: plymouth-upstart-bridge main process ended, respawning
[ 156.906391] init: plymouth-upstart-bridge main process (2692) terminated with status 1
[ 156.906428] init: plymouth-upstart-bridge main process ended, respawning
[ 156.947715] init: plymouth-upstart-bridge main process (2696) terminated with status 1
[ 156.947746] init: plymouth-upstart-bridge main process ended, respawning
[ 157.054944] lp: driver loaded but no devices found
[ 157.135579] ppdev: user-space parallel port driver
[ 158.961148] init: udev-fallback-graphics main process (2781) terminated with status 1
[ 161.186170] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 162.658738] Bluetooth: Core ver 2.17
[ 162.658780] NET: Registered protocol family 31
[ 162.658785] Bluetooth: HCI device and connection manager initialized
[ 162.658802] Bluetooth: HCI socket layer initialized
[ 162.658810] Bluetooth: L2CAP socket layer initialized
[ 162.658823] Bluetooth: SCO socket layer initialized
[ 162.725121] Bluetooth: RFCOMM TTY layer initialized
[ 162.725139] Bluetooth: RFCOMM socket layer initialized
[ 162.725152] Bluetooth: RFCOMM ver 1.11
[ 162.746120] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 162.746127] Bluetooth: BNEP filters: protocol multicast
[ 162.746143] Bluetooth: BNEP socket layer initialized
[ 162.908207] init: avahi-cups-reload main process (3090) terminated with status 1
[ 163.126577] type=1400 audit(1409689433.363:2): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/lib/cups/backend/cups-pdf" pid=3061 comm=“apparmor_parser”
[ 163.126590] type=1400 audit(1409689433.363:3): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/sbin/cupsd" pid=3061 comm=“apparmor_parser”
[ 163.127262] type=1400 audit(1409689433.363:4): apparmor=“STATUS” operation=“profile_replace” profile=“unconfined” name="/usr/sbin/cupsd" pid=3061 comm=“apparmor_parser”
[ 163.732263] type=1400 audit(1409689433.971:5): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/sbin/cups-browsed" pid=3113 comm=“apparmor_parser”
[ 282.202001] type=1400 audit(1409689552.439:6): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/sbin/dhclient" pid=3179 comm=“apparmor_parser”
[ 282.202023] type=1400 audit(1409689552.439:7): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=3179 comm=“apparmor_parser”
[ 282.202038] type=1400 audit(1409689552.439:8): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/lib/connman/scripts/dhclient-script" pid=3179 comm=“apparmor_parser”
[ 282.203111] type=1400 audit(1409689552.439:9): apparmor=“STATUS” operation=“profile_replace” profile=“unconfined” name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=3179 comm=“apparmor_parser”
[ 282.203123] type=1400 audit(1409689552.439:10): apparmor=“STATUS” operation=“profile_replace” profile=“unconfined” name="/usr/lib/connman/scripts/dhclient-script" pid=3179 comm=“apparmor_parser”
[ 282.203465] type=1400 audit(1409689552.439:11): apparmor=“STATUS” operation=“profile_replace” profile=“unconfined” name="/usr/lib/connman/scripts/dhclient-script" pid=3179 comm=“apparmor_parser”
[ 282.208852] type=1400 audit(1409689552.447:12): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/lib/lightdm/lightdm-guest-session" pid=3178 comm=“apparmor_parser”
[ 282.208869] type=1400 audit(1409689552.447:13): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name=“chromium” pid=3178 comm=“apparmor_parser”
[ 282.209540] type=1400 audit(1409689552.447:14): apparmor=“STATUS” operation=“profile_replace” profile=“unconfined” name=“chromium” pid=3178 comm=“apparmor_parser”
[ 282.231305] type=1400 audit(1409689552.467:15): apparmor=“STATUS” operation=“profile_load” profile=“unconfined” name="/usr/lib/telepathy/mission-control-5" pid=3182 comm=“apparmor_parser”
[ 287.249007] init: plymouth-upstart-bridge main process ended, respawning
[ 288.497750] init: friendly-recovery post-stop process (2648) terminated with status 1
[ 327.740042] usb 2-2: new full-speed USB device number 2 using uhci_hcd
[ 327.898042] usb 2-2: New USB device found, idVendor=0fe6, idProduct=9700
[ 327.898047] usb 2-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 327.898051] usb 2-2: Product: USB 2.0 10/100M Ethernet Adaptor
[ 328.105403] dm9601 2-2:1.0 eth1: register ‘dm9601’ at usb-0000:00:1d.0-2, Davicom DM96xx USB 10/100 Ethernet, 00:e0:4c:53:44:58
[ 328.105621] usbcore: registered new interface driver dm9601
[ 328.121032] usbcore: registered new interface driver sr9700
[ 328.241077] dm9601 2-2:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0xFFFF
[ 329.271038] dm9601 2-2:1.0 eth1: kevent 4 may have been dropped
[ 329.273033] dm9601 2-2:1.0 eth1: kevent 4 may have been dropped
[ 329.283033] dm9601 2-2:1.0 eth1: kevent 4 may have been dropped
[ 329.285033] dm9601 2-2:1.0 eth1: kevent 4 may have been dropped
[ 329.287032] dm9601 2-2:1.0 eth1: kevent 4 may have been dropped
[ 329.289032] dm9601 2-2:1.0 eth1: kevent 4 may have been dropped
[ 329.327049] dm9601 2-2:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0xFFFF
[ 329.512050] dm9601 2-2:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0xFFFF
[ 464.864068] usb 1-8: new high-speed USB device number 6 using ehci-pci
[ 465.000948] usb 1-8: New USB device found, idVendor=0951, idProduct=1665
[ 465.000954] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 465.000958] usb 1-8: Product: DataTraveler 2.0
[ 465.000961] usb 1-8: Manufacturer: Kingston
[ 465.000964] usb 1-8: SerialNumber: 00241D8CE3F7BD30A93101CE
[ 465.001269] usb-storage 1-8:1.0: USB Mass Storage device detected
[ 465.001374] scsi5 : usb-storage 1-8:1.0
[ 466.082279] scsi 5:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
[ 466.082793] sd 5:0:0:0: Attached scsi generic sg6 type 0
[ 467.819136] sd 5:0:0:0: [sdf] 30712320 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 467.819748] sd 5:0:0:0: [sdf] Write Protect is off
[ 467.819754] sd 5:0:0:0: [sdf] Mode Sense: 23 00 00 00
[ 467.820379] sd 5:0:0:0: [sdf] No Caching mode page found
[ 467.820386] sd 5:0:0:0: [sdf] Assuming drive cache: write through
[ 467.825753] sd 5:0:0:0: [sdf] No Caching mode page found
[ 467.825761] sd 5:0:0:0: [sdf] Assuming drive cache: write through
[ 467.845672] sdf: sdf1
[ 467.849888] sd 5:0:0:0: [sdf] No Caching mode page found
[ 467.849896] sd 5:0:0:0: [sdf] Assuming drive cache: write through
[ 467.849902] sd 5:0:0:0: [sdf] Attached SCSI removable disk
[ 470.169002] FAT-fs (sdf1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 474.614171] systemd-hostnamed[4667]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!