Bonsoir,
Mes recherches ayant été infructueuses sur le sujet, je me tourne vers vous, car j’ai du mal à croire que je sois le seul dans la situation.
Sous sid, depuis le noyau 3.2.0-2, /dev ne contient plus de cdrom, alors que c’était bien le cas dans 3.2.0-1. Donc bien que mes lecteurs soient reconnus dans le bios, rien dans l’OS.
Les différents “scanbus” testés n’ont rien donné, et impossible de charger le module ide-cd.
Une idée ? Un retour d’expérience ?
Merci d’avance 
Salut,
cdrom n’est qu’un lien symbolique, cherche plutôt “sr”
lrwxrwxrwx 1 root root 3 mars 26 09:29 cdrom -> sr0
lrwxrwxrwx 1 root root 3 mars 26 09:29 cdrw -> sr0Salut,
Idem : ni cdrom, ni sr dans /dev.
J’ai ça :
ricardo@sid-sda8:~$ uname -r
3.2.0-2-amd64
Alors voici mes résultats, pour que ce soit plus clair :
13:08 arnaud@centre ~% uname -r
3.2.0-2-686-pae
13:08 arnaud@centre ~% ls -al /dev
total 4,0K
drwxr-xr-x 18 root root 3,6K mars 26 11:46 ./
drwxr-xr-x 23 root root 4,0K mars 25 17:16 ../
crw-rw---T+ 1 root audio 14, 12 mars 26 11:10 adsp
crw-rw---T+ 1 root audio 14, 4 mars 26 11:10 audio
crw-rw---T+ 1 root audio 14, 20 mars 26 11:10 audio1
crw------T 1 root root 10, 235 mars 26 11:09 autofs
drwxr-xr-x 2 root root 500 mars 26 11:46 block/
drwxr-xr-x 2 root root 160 mars 26 11:09 bsg/
crw------T 1 root root 10, 234 mars 26 11:09 btrfs-control
drwxr-xr-x 3 root root 60 mars 26 11:09 bus/
drwxr-xr-x 2 root root 80 mars 26 11:10 centre/
drwxr-xr-x 2 root root 3,2K mars 26 11:11 char/
crw------- 1 root root 5, 1 mars 26 11:11 console
lrwxrwxrwx 1 root root 11 mars 26 11:09 core -> /proc/kcore
drwxr-xr-x 2 root root 60 mars 26 11:09 cpu/
crw------- 1 root root 10, 62 mars 26 11:09 cpu_dma_latency
drwxr-xr-x 5 root root 100 mars 26 11:09 disk/
brw-rw---T 1 root disk 254, 0 mars 26 11:10 dm-0
brw-rw---T 1 root disk 254, 1 mars 26 11:10 dm-1
brw-rw---T 1 root disk 254, 2 mars 26 11:10 dm-2
brw-rw---T 1 root disk 254, 3 mars 26 11:10 dm-3
brw-rw---T 1 root disk 254, 4 mars 26 11:46 dm-4
crw-rw---T+ 1 root audio 14, 3 mars 26 11:10 dsp
crw-rw---T+ 1 root audio 14, 19 mars 26 11:10 dsp1
lrwxrwxrwx 1 root root 13 mars 26 11:09 fd -> /proc/self/fd/
crw-rw-rw- 1 root root 1, 7 mars 26 11:09 full
crw-rw---T 1 root fuse 10, 229 mars 26 11:10 fuse
crw------- 1 root root 252, 0 mars 26 11:10 hidraw0
crw------- 1 root root 252, 1 mars 26 11:10 hidraw1
drwxr-xr-x 2 root root 80 mars 26 11:10 home/
crw------- 1 root root 10, 228 mars 26 11:09 hpet
drwxr-xr-x 4 root root 260 mars 26 11:10 input/
crw------- 1 root root 1, 11 mars 26 11:09 kmsg
srw-rw-rw- 1 root root 0 mars 26 11:10 log=
brw-rw---T 1 root disk 7, 0 mars 26 11:46 loop0
brw-rw---T 1 root disk 7, 1 mars 26 11:10 loop1
brw-rw---T 1 root disk 7, 2 mars 26 11:10 loop2
brw-rw---T 1 root disk 7, 3 mars 26 11:10 loop3
brw-rw---T 1 root disk 7, 4 mars 26 11:10 loop4
brw-rw---T 1 root disk 7, 5 mars 26 11:10 loop5
brw-rw---T 1 root disk 7, 6 mars 26 11:10 loop6
brw-rw---T 1 root disk 7, 7 mars 26 11:10 loop7
crw------T 1 root root 10, 237 mars 26 11:10 loop-control
crw-rw---T 1 root lp 6, 0 mars 26 11:10 lp0
lrwxrwxrwx 1 root root 9 mars 26 11:09 MAKEDEV -> /bin/true*
drwxr-xr-x 2 root root 160 mars 26 11:46 mapper/
crw------- 1 root root 10, 227 mars 26 11:09 mcelog
crw-r----T 1 root kmem 1, 1 mars 26 11:09 mem
crw-rw---T+ 1 root audio 14, 0 mars 26 11:10 mixer
crw-rw---T+ 1 root audio 14, 16 mars 26 11:10 mixer1
drwxr-xr-x 2 root root 60 mars 26 11:09 net/
crw------- 1 root root 10, 61 mars 26 11:09 network_latency
crw------- 1 root root 10, 60 mars 26 11:09 network_throughput
crw-rw-rw- 1 root root 1, 3 mars 26 11:09 null
crw-rw----+ 1 root video 195, 0 mars 26 11:10 nvidia0
crw-rw----+ 1 root video 195, 255 mars 26 11:10 nvidiactl
crw-rw---T 1 root lp 99, 0 mars 26 11:10 parport0
crw-r----T 1 root kmem 1, 4 mars 26 11:09 port
crw------T 1 root root 108, 0 mars 26 11:09 ppp
crw------- 1 root root 10, 1 mars 26 11:09 psaux
crw-rw-rw- 1 root root 5, 2 mars 26 13:09 ptmx
drwxr-xr-x 2 root root 0 mars 26 11:09 pts/
crw-rw-rw- 1 root root 1, 8 mars 26 11:09 random
lrwxrwxrwx 1 root root 4 mars 26 11:10 root -> sda1
lrwxrwxrwx 1 root root 4 mars 26 11:09 rtc -> rtc0
crw------- 1 root root 254, 0 mars 26 11:09 rtc0
brw-rw---T 1 root disk 8, 0 mars 26 11:10 sda
brw-rw---T 1 root disk 8, 1 mars 26 11:10 sda1
brw-rw---T 1 root disk 8, 2 mars 26 11:10 sda2
brw-rw---T 1 root disk 8, 3 mars 26 11:10 sda3
brw-rw---T 1 root disk 8, 16 mars 26 11:10 sdb
brw-rw---T 1 root disk 8, 17 mars 26 11:10 sdb1
brw-rw---T 1 root floppy 8, 32 mars 26 11:10 sdc
brw-rw---T 1 root floppy 8, 48 mars 26 11:10 sdd
brw-rw---T 1 root floppy 8, 64 mars 26 11:10 sde
brw-rw---T 1 root floppy 8, 80 mars 26 11:10 sdf
lrwxrwxrwx 1 root root 8 mars 26 11:10 shm -> /run/shm/
crw------- 1 root root 10, 231 mars 26 11:09 snapshot
drwxr-xr-x 4 root root 300 mars 26 11:10 snd/
lrwxrwxrwx 1 root root 24 mars 26 11:09 sndstat -> /proc/asound/oss/sndstat
lrwxrwxrwx 1 root root 15 mars 26 11:09 stderr -> /proc/self/fd/2
lrwxrwxrwx 1 root root 15 mars 26 11:09 stdin -> /proc/self/fd/0
lrwxrwxrwx 1 root root 15 mars 26 11:09 stdout -> /proc/self/fd/1
crw-rw-rw- 1 root root 5, 0 mars 26 11:09 tty
crw------- 1 root root 4, 0 mars 26 11:09 tty0
crw-rw---- 1 root tty 4, 1 mars 26 11:11 tty1
crw------- 1 root root 4, 10 mars 26 11:09 tty10
crw------- 1 root root 4, 11 mars 26 11:09 tty11
crw------- 1 root root 4, 12 mars 26 11:09 tty12
crw------- 1 root root 4, 13 mars 26 11:09 tty13
crw------- 1 root root 4, 14 mars 26 11:09 tty14
crw------- 1 root root 4, 15 mars 26 11:09 tty15
crw------- 1 root root 4, 16 mars 26 11:09 tty16
crw------- 1 root root 4, 17 mars 26 11:09 tty17
crw------- 1 root root 4, 18 mars 26 11:09 tty18
crw------- 1 root root 4, 19 mars 26 11:09 tty19
crw-rw---- 1 root tty 4, 2 mars 26 11:11 tty2
crw------- 1 root root 4, 20 mars 26 11:09 tty20
crw------- 1 root root 4, 21 mars 26 11:09 tty21
crw------- 1 root root 4, 22 mars 26 11:09 tty22
crw------- 1 root root 4, 23 mars 26 11:09 tty23
crw------- 1 root root 4, 24 mars 26 11:09 tty24
crw------- 1 root root 4, 25 mars 26 11:09 tty25
crw------- 1 root root 4, 26 mars 26 11:09 tty26
crw------- 1 root root 4, 27 mars 26 11:09 tty27
crw------- 1 root root 4, 28 mars 26 11:09 tty28
crw------- 1 root root 4, 29 mars 26 11:09 tty29
crw-rw---- 1 root tty 4, 3 mars 26 11:11 tty3
crw------- 1 root root 4, 30 mars 26 11:09 tty30
crw------- 1 root root 4, 31 mars 26 11:09 tty31
crw------- 1 root root 4, 32 mars 26 11:09 tty32
crw------- 1 root root 4, 33 mars 26 11:09 tty33
crw------- 1 root root 4, 34 mars 26 11:09 tty34
crw------- 1 root root 4, 35 mars 26 11:09 tty35
crw------- 1 root root 4, 36 mars 26 11:09 tty36
crw------- 1 root root 4, 37 mars 26 11:09 tty37
crw------- 1 root root 4, 38 mars 26 11:09 tty38
crw------- 1 root root 4, 39 mars 26 11:09 tty39
crw-rw---- 1 root tty 4, 4 mars 26 11:11 tty4
crw------- 1 root root 4, 40 mars 26 11:09 tty40
crw------- 1 root root 4, 41 mars 26 11:09 tty41
crw------- 1 root root 4, 42 mars 26 11:09 tty42
crw------- 1 root root 4, 43 mars 26 11:09 tty43
crw------- 1 root root 4, 44 mars 26 11:09 tty44
crw------- 1 root root 4, 45 mars 26 11:09 tty45
crw------- 1 root root 4, 46 mars 26 11:09 tty46
crw------- 1 root root 4, 47 mars 26 11:09 tty47
crw------- 1 root root 4, 48 mars 26 11:09 tty48
crw------- 1 root root 4, 49 mars 26 11:09 tty49
crw-rw---- 1 root tty 4, 5 mars 26 11:11 tty5
crw------- 1 root root 4, 50 mars 26 11:09 tty50
crw------- 1 root root 4, 51 mars 26 11:09 tty51
crw------- 1 root root 4, 52 mars 26 11:09 tty52
crw------- 1 root root 4, 53 mars 26 11:09 tty53
crw------- 1 root root 4, 54 mars 26 11:09 tty54
crw------- 1 root root 4, 55 mars 26 11:09 tty55
crw------- 1 root root 4, 56 mars 26 11:09 tty56
crw------- 1 root root 4, 57 mars 26 11:09 tty57
crw------- 1 root root 4, 58 mars 26 11:09 tty58
crw------- 1 root root 4, 59 mars 26 11:09 tty59
crw-rw---- 1 root tty 4, 6 mars 26 11:11 tty6
crw------- 1 root root 4, 60 mars 26 11:09 tty60
crw------- 1 root root 4, 61 mars 26 11:09 tty61
crw------- 1 root root 4, 62 mars 26 11:09 tty62
crw------- 1 root root 4, 63 mars 26 11:09 tty63
crw------- 1 root root 4, 7 mars 26 11:09 tty7
crw------- 1 root root 4, 8 mars 26 11:09 tty8
crw------- 1 root root 4, 9 mars 26 11:09 tty9
crw-rw---T 1 root dialout 4, 64 mars 26 11:09 ttyS0
crw-rw---T 1 root dialout 4, 65 mars 26 11:09 ttyS1
crw-rw---T 1 root dialout 4, 66 mars 26 11:09 ttyS2
crw-rw---T 1 root dialout 4, 67 mars 26 11:09 ttyS3
crw------T 1 root root 10, 223 mars 26 11:09 uinput
crw-rw-rw- 1 root root 1, 9 mars 26 11:09 urandom
drwxr-xr-x 2 root root 60 mars 26 11:09 usb/
drwxr-xr-x 4 root root 80 mars 26 11:10 v4l/
crw------- 1 root root 10, 59 mars 26 11:11 vboxdrv
crw------- 1 root root 10, 58 mars 26 11:11 vboxnetctl
drwxr-x--- 4 root vboxusers 80 mars 26 11:10 vboxusb/
crw------- 1 root root 7, 0 mars 26 11:09 vcs
crw------- 1 root root 7, 1 mars 26 11:09 vcs1
crw------- 1 root root 7, 2 mars 26 11:10 vcs2
crw------- 1 root root 7, 3 mars 26 11:10 vcs3
crw------- 1 root root 7, 4 mars 26 11:10 vcs4
crw------- 1 root root 7, 5 mars 26 11:10 vcs5
crw------- 1 root root 7, 6 mars 26 11:10 vcs6
crw------- 1 root root 7, 7 mars 26 11:10 vcs7
crw------- 1 root root 7, 128 mars 26 11:09 vcsa
crw------- 1 root root 7, 129 mars 26 11:09 vcsa1
crw------- 1 root root 7, 130 mars 26 11:10 vcsa2
crw------- 1 root root 7, 131 mars 26 11:10 vcsa3
crw------- 1 root root 7, 132 mars 26 11:10 vcsa4
crw------- 1 root root 7, 133 mars 26 11:10 vcsa5
crw------- 1 root root 7, 134 mars 26 11:10 vcsa6
crw------- 1 root root 7, 135 mars 26 11:10 vcsa7
crw------- 1 root root 10, 63 mars 26 11:09 vga_arbiter
crw-rw---T+ 1 root video 81, 0 mars 26 11:10 video0
crw------- 1 root root 10, 130 mars 26 11:09 watchdog
prw-r----- 1 root adm 0 mars 26 13:09 xconsole|
crw-rw-rw- 1 root root 1, 5 mars 26 11:09 zero
Vraiment bizarre, sous 3.2.0-1 cela fonctionne sans soucis.
Voici le contenu de /etc/udev/rules.d/70-persistent-cd.rules :
[code]# DVDRAM_GSA-H10A (pci-0000:03:00.1-scsi-0:0:1:0)
SUBSYSTEM==“block”, ENV{ID_CDROM}=="?", ENV{ID_PATH}==“pci-0000:03:00.1-scsi-0:0:1:0”, SYMLINK+=“cdrom”, ENV{GENERATED}=“1"
SUBSYSTEM==“block”, ENV{ID_CDROM}==”?", ENV{ID_PATH}==“pci-0000:03:00.1-scsi-0:0:1:0”, SYMLINK+=“cdrw”, ENV{GENERATED}=“1"
SUBSYSTEM==“block”, ENV{ID_CDROM}==”?", ENV{ID_PATH}==“pci-0000:03:00.1-scsi-0:0:1:0”, SYMLINK+=“dvd”, ENV{GENERATED}=“1"
SUBSYSTEM==“block”, ENV{ID_CDROM}==”?", ENV{ID_PATH}==“pci-0000:03:00.1-scsi-0:0:1:0”, SYMLINK+=“dvdrw”, ENV{GENERATED}=“1”
SUBSYSTEM==“block”, ENV{ID_CDROM}=="?", ENV{ID_PATH}==“pci-0000:03:00.1-scsi-0:0:0:0”, SYMLINK+=“cdrom1”, ENV{GENERATED}=“1"
SUBSYSTEM==“block”, ENV{ID_CDROM}==”?", ENV{ID_PATH}==“pci-0000:03:00.1-scsi-0:0:0:0”, SYMLINK+=“dvd1”, ENV{GENERATED}=“1”[/code]
Tu as 4 périphériques sdc,sdd,sde et sdf du type floppy, ça correspond à quoi?
Tu peux donner les logs au boute? (dmesg par exemples)
Ce sont les quatre entrées d’un lecteur universel de cartes ( sd, mmc, etc… )
C’est un peu long, car j’ai désactivé certaines options de grub, pensant qu’il s’agissait d’un problème d’IRQ. Après recherche sur le web, il semblerait plutôt que l’origine soit udev ou une option du noyau manquante :
18:00 arnaud@centre ~% dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-2-686-pae (Debian 3.2.12-1) (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1 SMP Tue Mar 20 19:48:26 UTC 2012
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000dfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000dfee0000 - 00000000dfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000dfee3000 - 00000000dfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000dfef0000 - 00000000dff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. 965P-DS3/965P-DS3, BIOS F12 05/28/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x120000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CCFFF write-protect
[ 0.000000] CD000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 3 base 100000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DFF00000 mask FFFF00000 write-through
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [c00f5360] f5360
[ 0.000000] initial memory mapped : 0 - 01a00000
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: 0000000000000000-00000000379fe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037800000 page 2M
[ 0.000000] 0037800000 - 00379fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 379fe000 @ 19fa000-1a00000
[ 0.000000] RAMDISK: 36bee000 - 375ef000
[ 0.000000] ACPI: RSDP 000f6cf0 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT dfee3040 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP dfee30c0 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT dfee3180 049F4 (v01 GBT GBTUACPI 00001000 MSFT 0100000C)
[ 0.000000] ACPI: FACS dfee0000 00040
[ 0.000000] ACPI: HPET dfee7cc0 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG dfee7d40 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: APIC dfee7bc0 00084 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: SSDT dfee7dc0 0015C (v01 PmRef Cpu0Ist 00003000 INTL 20040311)
[ 0.000000] ACPI: SSDT dfee8250 00275 (v01 PmRef CpuPm 00003000 INTL 20040311)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 3718MB HIGHMEM available.
[ 0.000000] 889MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 379fe000
[ 0.000000] low ram: 0 - 379fe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000379fe
[ 0.000000] HighMem 0x000379fe -> 0x00120000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000dfee0
[ 0.000000] 0: 0x00100000 -> 0x00120000
[ 0.000000] On node 0 totalpages: 1048175
[ 0.000000] free_area_init_node: node 0, pgdat c1415d40, node_mem_map f47ee200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 1748 pages used for memmap
[ 0.000000] Normal zone: 221994 pages, LIFO batch:31
[ 0.000000] HighMem zone: 7437 pages used for memmap
[ 0.000000] HighMem zone: 813013 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at dff00000 (gap: dff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f7600000 s33024 r0 d24320 u524288
[ 0.000000] pcpu-alloc: s33024 r0 d24320 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1038958
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-2-686-pae root=UUID=3aa42372-e7c0-41a3-89ee-664c508d2680 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (000379fe:00120000)
[ 0.000000] Memory: 4139252k/4718592k available (2840k kernel code, 53448k reserved, 1372k data, 412k init, 3281800k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd36000 - 0xfffff000 (2852 kB)
[ 0.000000] pkmap : 0xffa00000 - 0xffc00000 (2048 kB)
[ 0.000000] vmalloc : 0xf81fe000 - 0xff9fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf79fe000 ( 889 MB)
[ 0.000000] .init : 0xc141e000 - 0xc1485000 ( 412 kB)
[ 0.000000] .data : 0xc12c62ac - 0xc141d600 (1372 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12c62ac (2840 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f4006000 soft=f4008000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2333.294 MHz processor.
[ 0.004002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4666.58 BogoMIPS (lpj=9333176)
[ 0.004005] pid_max: default: 32768 minimum: 301
[ 0.004038] Security Framework initialized
[ 0.004043] AppArmor: AppArmor disabled by boot time parameter
[ 0.004057] Mount-cache hash table entries: 512
[ 0.004167] Initializing cgroup subsys cpuacct
[ 0.004173] Initializing cgroup subsys memory
[ 0.004180] Initializing cgroup subsys devices
[ 0.004182] Initializing cgroup subsys freezer
[ 0.004184] Initializing cgroup subsys net_cls
[ 0.004186] Initializing cgroup subsys blkio
[ 0.004191] Initializing cgroup subsys perf_event
[ 0.004216] CPU: Physical Processor ID: 0
[ 0.004218] CPU: Processor Core ID: 0
[ 0.004221] mce: CPU supports 6 MCE banks
[ 0.004227] CPU0: Thermal monitoring enabled (TM2)
[ 0.004230] using mwait in idle threads.
[ 0.004597] ACPI: Core revision 20110623
[ 0.009737] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.010089] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.049781] CPU0: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz stepping 0b
[ 0.052002] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.052002] PEBS disabled due to CPU errata.
[ 0.052002] ... version: 2
[ 0.052002] ... bit width: 40
[ 0.052002] ... generic registers: 2
[ 0.052002] ... value mask: 000000ffffffffff
[ 0.052002] ... max period: 000000007fffffff
[ 0.052002] ... fixed-purpose events: 3
[ 0.052002] ... event mask: 0000000700000003
[ 0.052002] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.052002] CPU 1 irqstacks, hard=f40d4000 soft=f40d6000
[ 0.052002] Booting Node 0, Processors #1
[ 0.052002] smpboot cpu 1: start_ip = 9b000
[ 0.008000] Initializing CPU#1
[ 0.140031] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.140063] Brought up 2 CPUs
[ 0.140065] Total of 2 processors activated (9333.22 BogoMIPS).
[ 0.141901] devtmpfs: initialized
[ 0.141901] PM: Registering ACPI NVS region at dfee0000 (12288 bytes)
[ 0.141901] print_constraints: dummy:
[ 0.141901] NET: Registered protocol family 16
[ 0.141901] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.141901] ACPI: bus type pci registered
[ 0.141901] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.141901] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.141901] PCI: Using MMCONFIG for extended config space
[ 0.141901] PCI: Using configuration type 1 for base access
[ 0.141901] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.141901] mtrr: probably your BIOS does not setup all CPUs.
[ 0.141901] mtrr: corrected configuration.
[ 0.141901] bio: create slab <bio-0> at 0
[ 0.141901] ACPI: Added _OSI(Module Device)
[ 0.141901] ACPI: Added _OSI(Processor Device)
[ 0.141901] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.141901] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.144016] ACPI: EC: Look up EC in DSDT
[ 0.147425] ACPI: SSDT dfee81c0 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.147585] ACPI: Dynamic OEM Table Load:
[ 0.147588] ACPI: SSDT (null) 00087 (v01 PmRef Cpu1Ist 00003000 INTL 20040311)
[ 0.147730] ACPI: Interpreter enabled
[ 0.147746] ACPI: (supports S0 S1 S4 S5)
[ 0.147765] ACPI: Using IOAPIC for interrupt routing
[ 0.151918] ACPI: No dock devices found.
[ 0.151920] HEST: Table not found.
[ 0.151925] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.151977] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[ 0.152109] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.152113] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.152116] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.152118] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.152121] pci_root PNP0A03:00: host bridge window [mem 0xdff00000-0xfebfffff] (ignored)
[ 0.152131] pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
[ 0.152173] pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
[ 0.152211] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.152215] pci 0000:00:01.0: PME# disabled
[ 0.152247] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
[ 0.152284] pci 0000:00:1a.0: reg 20: [io 0xc000-0xc01f]
[ 0.152313] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
[ 0.152350] pci 0000:00:1a.1: reg 20: [io 0xc400-0xc41f]
[ 0.152386] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
[ 0.152402] pci 0000:00:1a.7: reg 10: [mem 0xf9104000-0xf91043ff]
[ 0.152485] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
[ 0.152500] pci 0000:00:1b.0: reg 10: [mem 0xf9100000-0xf9103fff 64bit]
[ 0.152562] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.152566] pci 0000:00:1b.0: PME# disabled
[ 0.152584] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
[ 0.152648] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.152652] pci 0000:00:1c.0: PME# disabled
[ 0.152673] pci 0000:00:1c.3: [8086:2845] type 1 class 0x000604
[ 0.152737] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.152741] pci 0000:00:1c.3: PME# disabled
[ 0.152761] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
[ 0.152824] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.152828] pci 0000:00:1c.4: PME# disabled
[ 0.152847] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
[ 0.152884] pci 0000:00:1d.0: reg 20: [io 0xc800-0xc81f]
[ 0.152913] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
[ 0.152950] pci 0000:00:1d.1: reg 20: [io 0xcc00-0xcc1f]
[ 0.152978] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
[ 0.153015] pci 0000:00:1d.2: reg 20: [io 0xd000-0xd01f]
[ 0.153050] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
[ 0.153066] pci 0000:00:1d.7: reg 10: [mem 0xf9105000-0xf91053ff]
[ 0.153145] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[ 0.153203] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
[ 0.153279] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0800 (mask 000f)
[ 0.153283] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 000f)
[ 0.153325] pci 0000:00:1f.2: [8086:2820] type 0 class 0x000101
[ 0.153337] pci 0000:00:1f.2: reg 10: [io 0x0000-0x0007]
[ 0.153345] pci 0000:00:1f.2: reg 14: [io 0x0000-0x0003]
[ 0.153352] pci 0000:00:1f.2: reg 18: [io 0x0000-0x0007]
[ 0.153360] pci 0000:00:1f.2: reg 1c: [io 0x0000-0x0003]
[ 0.153368] pci 0000:00:1f.2: reg 20: [io 0xf000-0xf00f]
[ 0.153375] pci 0000:00:1f.2: reg 24: [io 0xfc00-0xfc0f]
[ 0.153402] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.153405] pci 0000:00:1f.2: PME# disabled
[ 0.153416] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
[ 0.153427] pci 0000:00:1f.3: reg 10: [mem 0xf9106000-0xf91060ff]
[ 0.153452] pci 0000:00:1f.3: reg 20: [io 0x0500-0x051f]
[ 0.153482] pci 0000:00:1f.5: [8086:2825] type 0 class 0x000101
[ 0.153495] pci 0000:00:1f.5: reg 10: [io 0xd800-0xd807]
[ 0.153502] pci 0000:00:1f.5: reg 14: [io 0xdc00-0xdc03]
[ 0.153510] pci 0000:00:1f.5: reg 18: [io 0xe000-0xe007]
[ 0.153517] pci 0000:00:1f.5: reg 1c: [io 0xe400-0xe403]
[ 0.153525] pci 0000:00:1f.5: reg 20: [io 0xe800-0xe80f]
[ 0.153533] pci 0000:00:1f.5: reg 24: [io 0xec00-0xec0f]
[ 0.153559] pci 0000:00:1f.5: PME# supported from D3hot
[ 0.153563] pci 0000:00:1f.5: PME# disabled
[ 0.153602] pci 0000:01:00.0: [10de:0393] type 0 class 0x000300
[ 0.153612] pci 0000:01:00.0: reg 10: [mem 0xf4000000-0xf4ffffff]
[ 0.153622] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.153632] pci 0000:01:00.0: reg 1c: [mem 0xf5000000-0xf5ffffff 64bit]
[ 0.153639] pci 0000:01:00.0: reg 24: [io 0x8000-0x807f]
[ 0.153646] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.153691] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.153694] pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
[ 0.153697] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf6ffffff]
[ 0.153702] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.153739] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.153742] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.153800] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
[ 0.153884] pci 0000:03:00.0: reg 24: [mem 0xf9000000-0xf9001fff]
[ 0.153945] pci 0000:03:00.0: PME# supported from D3hot
[ 0.153950] pci 0000:03:00.0: PME# disabled
[ 0.153978] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
[ 0.154001] pci 0000:03:00.1: reg 10: [io 0x9000-0x9007]
[ 0.154015] pci 0000:03:00.1: reg 14: [io 0x9400-0x9403]
[ 0.154028] pci 0000:03:00.1: reg 18: [io 0x9800-0x9807]
[ 0.154041] pci 0000:03:00.1: reg 1c: [io 0x9c00-0x9c03]
[ 0.154054] pci 0000:03:00.1: reg 20: [io 0xa000-0xa00f]
[ 0.160027] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.160031] pci 0000:00:1c.3: bridge window [io 0x9000-0xafff]
[ 0.160036] pci 0000:00:1c.3: bridge window [mem 0xf9000000-0xf90fffff]
[ 0.160100] pci 0000:04:00.0: [11ab:4364] type 0 class 0x000200
[ 0.160123] pci 0000:04:00.0: reg 10: [mem 0xf8000000-0xf8003fff 64bit]
[ 0.160136] pci 0000:04:00.0: reg 18: [io 0xb000-0xb0ff]
[ 0.160179] pci 0000:04:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.160246] pci 0000:04:00.0: supports D1 D2
[ 0.160248] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.160254] pci 0000:04:00.0: PME# disabled
[ 0.168024] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.168028] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.168033] pci 0000:00:1c.4: bridge window [mem 0xf7000000-0xf8ffffff]
[ 0.168097] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
[ 0.168101] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff]
[ 0.168109] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.168112] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
[ 0.168133] pci_bus 0000:00: on NUMA node 0
[ 0.168136] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.168351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 0.168397] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 0.168449] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
[ 0.168492] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.168621] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.168625] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.168627] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.176880] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.176925] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.176970] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.177014] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 0.177058] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.177102] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
[ 0.177146] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.177190] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 0.177278] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.177278] vgaarb: loaded
[ 0.177278] vgaarb: bridge control possible 0000:01:00.0
[ 0.177278] PCI: Using ACPI for IRQ routing
[ 0.177342] PCI: pci_cache_line_size set to 64 bytes
[ 0.177419] reserve RAM buffer: 000000000009f800 - 000000000009ffff
[ 0.177422] reserve RAM buffer: 00000000dfee0000 - 00000000dfffffff
[ 0.177525] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.177530] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.177535] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.184084] Switching to clocksource hpet
[ 0.185756] pnp: PnP ACPI init
[ 0.185771] ACPI: bus type pnp registered
[ 0.185851] pnp 00:00: [bus 00-3f]
[ 0.185854] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.185856] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.185859] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.185861] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.185863] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.185866] pnp 00:00: [mem 0xdff00000-0xfebfffff window]
[ 0.185921] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.185996] pnp 00:01: [io 0x0010-0x001f]
[ 0.185999] pnp 00:01: [io 0x0022-0x003f]
[ 0.186000] pnp 00:01: [io 0x0044-0x005f]
[ 0.186002] pnp 00:01: [io 0x0062-0x0063]
[ 0.186004] pnp 00:01: [io 0x0065-0x006f]
[ 0.186006] pnp 00:01: [io 0x0074-0x007f]
[ 0.186008] pnp 00:01: [io 0x0091-0x0093]
[ 0.186010] pnp 00:01: [io 0x00a2-0x00bf]
[ 0.186012] pnp 00:01: [io 0x00e0-0x00ef]
[ 0.186014] pnp 00:01: [io 0x04d0-0x04d1]
[ 0.186016] pnp 00:01: [io 0x0290-0x029f]
[ 0.186018] pnp 00:01: [io 0x0800-0x087f]
[ 0.186019] pnp 00:01: [io 0x0290-0x0294]
[ 0.186021] pnp 00:01: [io 0x0880-0x088f]
[ 0.186087] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.186090] system 00:01: [io 0x0290-0x029f] has been reserved
[ 0.186093] system 00:01: [io 0x0800-0x087f] has been reserved
[ 0.186096] system 00:01: [io 0x0290-0x0294] has been reserved
[ 0.186098] system 00:01: [io 0x0880-0x088f] has been reserved
[ 0.186101] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.186113] pnp 00:02: [dma 4]
[ 0.186115] pnp 00:02: [io 0x0000-0x000f]
[ 0.186117] pnp 00:02: [io 0x0080-0x0090]
[ 0.186119] pnp 00:02: [io 0x0094-0x009f]
[ 0.186121] pnp 00:02: [io 0x00c0-0x00df]
[ 0.186152] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.186163] pnp 00:03: [io 0x0070-0x0073]
[ 0.186171] pnp 00:03: [irq 8]
[ 0.186205] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.186213] pnp 00:04: [io 0x0061]
[ 0.186245] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.186254] pnp 00:05: [io 0x00f0-0x00ff]
[ 0.186258] pnp 00:05: [irq 13]
[ 0.186291] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.186499] pnp 00:06: [io 0x03f8-0x03ff]
[ 0.186504] pnp 00:06: [irq 4]
[ 0.186570] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.186737] pnp 00:07: [io 0x0378-0x037f]
[ 0.186742] pnp 00:07: [irq 7]
[ 0.186795] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.186900] pnp 00:08: [io 0x0400-0x04bf]
[ 0.186952] system 00:08: [io 0x0400-0x04bf] has been reserved
[ 0.186956] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187133] pnp 00:09: [mem 0xf0000000-0xf3ffffff]
[ 0.187198] system 00:09: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.187201] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.187359] pnp 00:0a: [mem 0x000d1000-0x000d3fff]
[ 0.187362] pnp 00:0a: [mem 0x000f0000-0x000f7fff]
[ 0.187364] pnp 00:0a: [mem 0x000f8000-0x000fbfff]
[ 0.187366] pnp 00:0a: [mem 0x000fc000-0x000fffff]
[ 0.187368] pnp 00:0a: [mem 0xdfee0000-0xdfefffff]
[ 0.187370] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 0.187372] pnp 00:0a: [mem 0x00100000-0xdfedffff]
[ 0.187375] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.187377] pnp 00:0a: [mem 0xfed10000-0xfed1dfff]
[ 0.187379] pnp 00:0a: [mem 0xfed20000-0xfed8ffff]
[ 0.187381] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.187383] pnp 00:0a: [mem 0xffb00000-0xffb7ffff]
[ 0.187385] pnp 00:0a: [mem 0xfff00000-0xffffffff]
[ 0.187387] pnp 00:0a: [mem 0x000e0000-0x000effff]
[ 0.187456] system 00:0a: [mem 0x000d1000-0x000d3fff] has been reserved
[ 0.187459] system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
[ 0.187462] system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
[ 0.187465] system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
[ 0.187468] system 00:0a: [mem 0xdfee0000-0xdfefffff] could not be reserved
[ 0.187471] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.187474] system 00:0a: [mem 0x00100000-0xdfedffff] could not be reserved
[ 0.187477] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.187480] system 00:0a: [mem 0xfed10000-0xfed1dfff] has been reserved
[ 0.187483] system 00:0a: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.187485] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.187488] system 00:0a: [mem 0xffb00000-0xffb7ffff] has been reserved
[ 0.187491] system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved
[ 0.187494] system 00:0a: [mem 0x000e0000-0x000effff] has been reserved
[ 0.187497] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.187516] pnp 00:0b: [mem 0xffb80000-0xffbfffff]
[ 0.187559] pnp 00:0b: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.187565] pnp: PnP ACPI: found 12 devices
[ 0.187566] ACPI: ACPI bus type pnp unregistered
[ 0.187570] PnPBIOS: Disabled by ACPI PNP
[ 0.224268] PCI: max bus depth: 1 pci_try_num: 2
[ 0.224304] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf9200000-0xf92fffff pref]
[ 0.224308] pci 0000:00:1c.4: BAR 15: assigned [mem 0xf9200000-0xf94fffff pref]
[ 0.224312] pci 0000:00:1c.3: BAR 15: assigned [mem 0xf9500000-0xf96fffff 64bit pref]
[ 0.224316] pci 0000:00:1c.0: BAR 14: assigned [mem 0xf9700000-0xf98fffff]
[ 0.224320] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf9900000-0xf9afffff 64bit pref]
[ 0.224324] pci 0000:01:00.0: BAR 6: assigned [mem 0xf6000000-0xf601ffff pref]
[ 0.224327] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.224330] pci 0000:00:01.0: bridge window [io 0x8000-0x8fff]
[ 0.224333] pci 0000:00:01.0: bridge window [mem 0xf4000000-0xf6ffffff]
[ 0.224337] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.224341] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.224344] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.224349] pci 0000:00:1c.0: bridge window [mem 0xf9700000-0xf98fffff]
[ 0.224353] pci 0000:00:1c.0: bridge window [mem 0xf9900000-0xf9afffff 64bit pref]
[ 0.224359] pci 0000:00:1c.3: PCI bridge to [bus 03-03]
[ 0.224362] pci 0000:00:1c.3: bridge window [io 0x9000-0xafff]
[ 0.224366] pci 0000:00:1c.3: bridge window [mem 0xf9000000-0xf90fffff]
[ 0.224370] pci 0000:00:1c.3: bridge window [mem 0xf9500000-0xf96fffff 64bit pref]
[ 0.224377] pci 0000:04:00.0: BAR 6: assigned [mem 0xf9200000-0xf921ffff pref]
[ 0.224379] pci 0000:00:1c.4: PCI bridge to [bus 04-04]
[ 0.224382] pci 0000:00:1c.4: bridge window [io 0xb000-0xbfff]
[ 0.224387] pci 0000:00:1c.4: bridge window [mem 0xf7000000-0xf8ffffff]
[ 0.224391] pci 0000:00:1c.4: bridge window [mem 0xf9200000-0xf94fffff pref]
[ 0.224396] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[ 0.224399] pci 0000:00:1e.0: bridge window [io 0x7000-0x7fff]
[ 0.224417] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.224421] pci 0000:00:01.0: setting latency timer to 64
[ 0.224427] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.224430] pci 0000:00:1c.0: setting latency timer to 64
[ 0.224439] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.224443] pci 0000:00:1c.3: setting latency timer to 64
[ 0.224448] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.224452] pci 0000:00:1c.4: setting latency timer to 64
[ 0.224458] pci 0000:00:1e.0: setting latency timer to 64
[ 0.224461] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.224463] pci_bus 0000:00: resource 1 [mem 0x00000000-0xfffffffff]
[ 0.224466] pci_bus 0000:01: resource 0 [io 0x8000-0x8fff]
[ 0.224468] pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf6ffffff]
[ 0.224471] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.224473] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
[ 0.224476] pci_bus 0000:02: resource 1 [mem 0xf9700000-0xf98fffff]
[ 0.224478] pci_bus 0000:02: resource 2 [mem 0xf9900000-0xf9afffff 64bit pref]
[ 0.224481] pci_bus 0000:03: resource 0 [io 0x9000-0xafff]
[ 0.224483] pci_bus 0000:03: resource 1 [mem 0xf9000000-0xf90fffff]
[ 0.224485] pci_bus 0000:03: resource 2 [mem 0xf9500000-0xf96fffff 64bit pref]
[ 0.224488] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff]
[ 0.224490] pci_bus 0000:04: resource 1 [mem 0xf7000000-0xf8ffffff]
[ 0.224493] pci_bus 0000:04: resource 2 [mem 0xf9200000-0xf94fffff pref]
[ 0.224495] pci_bus 0000:05: resource 0 [io 0x7000-0x7fff]
[ 0.224497] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
[ 0.224500] pci_bus 0000:05: resource 5 [mem 0x00000000-0xfffffffff]
[ 0.224543] NET: Registered protocol family 2
[ 0.224604] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.224798] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.225094] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.225235] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.225237] TCP reno registered
[ 0.225239] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.225248] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.225314] NET: Registered protocol family 1
[ 0.225332] pci 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.225348] pci 0000:00:1a.0: PCI INT A disabled
[ 0.225360] pci 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.225374] pci 0000:00:1a.1: PCI INT B disabled
[ 0.225385] pci 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.225406] pci 0000:00:1a.7: PCI INT C disabled
[ 0.225423] pci 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.225438] pci 0000:00:1d.0: PCI INT A disabled
[ 0.225445] pci 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.225459] pci 0000:00:1d.1: PCI INT B disabled
[ 0.225466] pci 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.225481] pci 0000:00:1d.2: PCI INT C disabled
[ 0.225488] pci 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.225501] pci 0000:00:1d.7: PCI INT A disabled
[ 0.225523] pci 0000:01:00.0: Boot video device
[ 0.225533] PCI: CLS 32 bytes, default 64
[ 0.225577] Unpacking initramfs...
[ 0.481243] Freeing initrd memory: 10244k freed
[ 0.484907] audit: initializing netlink socket (disabled)
[ 0.484921] type=2000 audit(1332860081.480:1): initialized
[ 0.508437] highmem bounce pool size: 64 pages
[ 0.508442] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.520344] VFS: Disk quotas dquot_6.5.2
[ 0.520380] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.520449] msgmni has been set to 1694
[ 0.520607] alg: No test for stdrng (krng)
[ 0.520634] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.520638] io scheduler noop registered
[ 0.520639] io scheduler deadline registered
[ 0.520651] io scheduler cfq registered (default)
[ 0.520734] pcieport 0000:00:01.0: setting latency timer to 64
[ 0.520764] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.520811] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.520844] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 0.520899] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.520933] pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
[ 0.520987] pcieport 0000:00:1c.4: setting latency timer to 64
[ 0.521020] pcieport 0000:00:1c.4: irq 43 for MSI/MSI-X
[ 0.521101] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.521126] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.521128] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.521476] intel_idle: MWAIT substates: 0x220
[ 0.521478] intel_idle: does not run on family 6 model 15
[ 0.521501] ERST: Table is not found!
[ 0.521503] GHES: HEST is not enabled!
[ 0.521515] isapnp: Scanning for PnP cards...
[ 0.874393] isapnp: No Plug & Play device found
[ 0.874457] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.894785] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.920502] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.936240] Linux agpgart interface v0.103
[ 0.936573] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.936956] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.936962] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.937081] mousedev: PS/2 mouse device common for all mice
[ 0.937133] rtc_cmos 00:03: RTC can wake from S4
[ 0.937226] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.937248] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.937259] cpuidle: using governor ladder
[ 0.937260] cpuidle: using governor menu
[ 0.937451] TCP cubic registered
[ 0.937483] NET: Registered protocol family 10
[ 0.937944] Mobile IPv6
[ 0.937947] NET: Registered protocol family 17
[ 0.937951] Registering the dns_resolver key type
[ 0.937971] Using IPI No-Shortcut mode
[ 0.938069] PM: Hibernation image not present or could not be loaded.
[ 0.938077] registered taskstats version 1
[ 0.944288] rtc_cmos 00:03: setting system clock to 2012-03-27 14:54:42 UTC (1332860082)
[ 0.944328] Initializing network drop monitor service
[ 0.944419] Freeing unused kernel memory: 412k freed
[ 0.944544] Write protecting the kernel text: 2844k
[ 0.944578] Write protecting the kernel read-only data: 1112k
[ 0.944580] NX-protecting the kernel data: 3300k
[ 0.956983] udevd[49]: starting version 175
[ 0.975431] usbcore: registered new interface driver usbfs
[ 0.975453] usbcore: registered new interface driver hub
[ 0.999288] SCSI subsystem initialized
[ 1.002257] sky2: driver version 1.30
[ 1.002294] sky2 0000:04:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.002307] sky2 0000:04:00.0: setting latency timer to 64
[ 1.002331] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3
[ 1.002414] sky2 0000:04:00.0: irq 44 for MSI/MSI-X
[ 1.012155] sky2 0000:04:00.0: eth0: addr 00:1a:4d:43:30:b9
[ 1.012942] usbcore: registered new device driver usb
[ 1.013303] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.013328] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.013344] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.013347] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.013368] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.017284] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 1.026769] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.033679] libata version 3.00 loaded.
[ 1.037428] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9104000
[ 1.048617] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
[ 1.048626] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 1.048657] pata_jmicron 0000:03:00.1: setting latency timer to 64
[ 1.048963] scsi0 : pata_jmicron
[ 1.049048] scsi1 : pata_jmicron
[ 1.049562] ata1: PATA max UDMA/100 cmd 0x9000 ctl 0x9400 bmdma 0xa000 irq 16
[ 1.049565] ata2: PATA max UDMA/100 cmd 0x9800 ctl 0x9c00 bmdma 0xa008 irq 16
[ 1.052016] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.052038] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.052040] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.052043] usb usb1: Product: EHCI Host Controller
[ 1.052045] usb usb1: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.052047] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.052152] hub 1-0:1.0: USB hub found
[ 1.052157] hub 1-0:1.0: 4 ports detected
[ 1.052234] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.052249] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.052252] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.052260] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.056168] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 1.056289] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9105000
[ 1.072033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.072055] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.072058] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.072061] usb usb2: Product: EHCI Host Controller
[ 1.072063] usb usb2: Manufacturer: Linux 3.2.0-2-686-pae ehci_hcd
[ 1.072065] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.072266] hub 2-0:1.0: USB hub found
[ 1.072272] hub 2-0:1.0: 6 ports detected
[ 1.072371] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 1.072379] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.072383] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.072394] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.072421] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c000
[ 1.072449] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.072452] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.072454] usb usb3: Product: UHCI Host Controller
[ 1.072456] usb usb3: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 1.072458] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.072597] hub 3-0:1.0: USB hub found
[ 1.072602] hub 3-0:1.0: 2 ports detected
[ 1.072672] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 1.072678] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.072681] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.072688] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.072717] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000c400
[ 1.072744] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.072747] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.072749] usb usb4: Product: UHCI Host Controller
[ 1.072751] usb usb4: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 1.072753] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.072856] hub 4-0:1.0: USB hub found
[ 1.072861] hub 4-0:1.0: 2 ports detected
[ 1.072930] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 1.072936] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.072939] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.072949] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 1.072970] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c800
[ 1.072998] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.073001] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.073003] usb usb5: Product: UHCI Host Controller
[ 1.073005] usb usb5: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 1.073007] usb usb5: SerialNumber: 0000:00:1d.0
[ 1.073397] hub 5-0:1.0: USB hub found
[ 1.073402] hub 5-0:1.0: 2 ports detected
[ 1.073472] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.073479] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.073482] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.073488] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 1.073519] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
[ 1.073546] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.073549] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.073551] usb usb6: Product: UHCI Host Controller
[ 1.073553] usb usb6: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 1.073555] usb usb6: SerialNumber: 0000:00:1d.1
[ 1.073655] hub 6-0:1.0: USB hub found
[ 1.073659] hub 6-0:1.0: 2 ports detected
[ 1.073725] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 1.073733] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.073736] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.073742] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 1.073763] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
[ 1.073791] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.073793] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.073796] usb usb7: Product: UHCI Host Controller
[ 1.073798] usb usb7: Manufacturer: Linux 3.2.0-2-686-pae uhci_hcd
[ 1.073800] usb usb7: SerialNumber: 0000:00:1d.2
[ 1.073895] hub 7-0:1.0: USB hub found
[ 1.073900] hub 7-0:1.0: 2 ports detected
[ 1.073981] ata_piix 0000:00:1f.2: version 2.13
[ 1.073991] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.073995] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 1.228050] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 1.228390] scsi2 : ata_piix
[ 1.228454] scsi3 : ata_piix
[ 1.228948] ata3: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.228953] ata4: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.228974] ata_piix 0000:00:1f.5: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.228978] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.229011] ata_piix 0000:00:1f.5: setting latency timer to 64
[ 1.229247] scsi4 : ata_piix
[ 1.229310] scsi5 : ata_piix
[ 1.229683] ata5: SATA max UDMA/133 cmd 0xd800 ctl 0xdc00 bmdma 0xe800 irq 19
[ 1.229687] ata6: SATA max UDMA/133 cmd 0xe000 ctl 0xe400 bmdma 0xe808 irq 19
[ 1.484033] Refined TSC clocksource calibration: 2333.332 MHz.
[ 1.484038] Switching to clocksource tsc
[ 1.532031] usb 2-3: new high-speed USB device number 2 using ehci_hcd
[ 1.558633] ata6: SATA link down (SStatus 0 SControl 300)
[ 1.569243] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.665717] usb 2-3: New USB device found, idVendor=058f, idProduct=6362
[ 1.665720] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.665723] usb 2-3: Product: Mass Storage Device
[ 1.665725] usb 2-3: Manufacturer: Generic
[ 1.665727] usb 2-3: SerialNumber: 058F63626376
[ 2.016048] usb 3-1: new full-speed USB device number 2 using uhci_hcd
[ 2.024096] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.024107] ata3.01: SATA link down (SStatus 4 SControl 300)
[ 2.024221] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.024232] ata4.01: SATA link down (SStatus 4 SControl 300)
[ 2.032324] ata4.00: ATA-8: SAMSUNG HD204UI, 1AQ10001, max UDMA/133
[ 2.032327] ata4.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.032390] ata3.00: HPA detected: current 1953523055, native 1953525168
[ 2.032394] ata3.00: ATA-8: SAMSUNG HD103SJ, 1AJ100E4, max UDMA/133
[ 2.032397] ata3.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.040312] ata3.00: configured for UDMA/133
[ 2.040342] ata4.00: configured for UDMA/133
[ 2.040413] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
[ 2.040610] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD204UI 1AQ1 PQ: 0 ANSI: 5
[ 2.041573] ahci 0000:03:00.0: version 3.0
[ 2.041585] ahci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2.047808] usbcore: registered new interface driver uas
[ 2.048596] Initializing USB Mass Storage driver...
[ 2.049090] sd 2:0:0:0: [sda] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.049140] sd 2:0:0:0: [sda] Write Protect is off
[ 2.049142] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.049163] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.049353] sd 3:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 2.049404] sd 3:0:0:0: [sdb] Write Protect is off
[ 2.049406] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.049532] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.049640] scsi6 : usb-storage 2-3:1.0
[ 2.049705] usbcore: registered new interface driver usb-storage
[ 2.049707] USB Mass Storage support registered.
[ 2.055047] sdb: sdb1
[ 2.055288] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 2.056076] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 2.056081] ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 2.056088] ahci 0000:03:00.0: setting latency timer to 64
[ 2.056432] scsi7 : ahci
[ 2.056516] scsi8 : ahci
[ 2.056619] ata7: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000100 irq 19
[ 2.056623] ata8: SATA max UDMA/133 abar m8192@0xf9000000 port 0xf9000180 irq 19
[ 2.069211] sda: sda1 sda2 sda3
[ 2.069310] sda: p3 size 1892992248 extends beyond EOD, enabling native capacity
[ 2.069329] ata3.00: hard resetting link
[ 2.297507] usb 3-1: New USB device found, idVendor=046d, idProduct=08b2
[ 2.297511] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.376049] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.376081] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.388033] ata3.01: hard resetting link
[ 2.540026] usb 3-2: new low-speed USB device number 3 using uhci_hcd
[ 2.717503] usb 3-2: New USB device found, idVendor=046d, idProduct=c517
[ 2.717506] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.717509] usb 3-2: Product: USB Receiver
[ 2.717511] usb 3-2: Manufacturer: Logitech
[ 2.744652] usbcore: registered new interface driver usbhid
[ 2.744654] usbhid: USB HID core driver
[ 2.864077] ata3.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.864088] ata3.01: SATA link down (SStatus 4 SControl 300)
[ 2.880149] ata3.00: n_sectors mismatch 1953523055 != 1953525168
[ 2.880152] ata3.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated
[ 2.888235] ata3.00: configured for UDMA/133
[ 2.888241] ata3: EH complete
[ 2.888287] sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.888577] sda: detected capacity change from 1000203804160 to 1000204886016
[ 2.913727] sda: sda1 sda2 sda3
[ 2.914038] sd 2:0:0:0: [sda] Attached SCSI disk
[ 2.930775] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input0
[ 2.930837] logitech 0003:046D:C517.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-2/input0
[ 2.960031] usb 7-1: new full-speed USB device number 2 using uhci_hcd
[ 2.962513] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 2.963157] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input1
[ 2.963270] logitech 0003:046D:C517.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-2/input1
[ 3.048652] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 3.049155] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 3.049654] scsi 6:0:0:2: Direct-Access Generic USB xD/SM Reader 1.02 PQ: 0 ANSI: 0
[ 3.050153] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 3.057904] sd 6:0:0:1: [sdd] Attached SCSI removable disk
[ 3.059311] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 3.061401] sd 6:0:0:3: [sdf] Attached SCSI removable disk
[ 3.062818] sd 6:0:0:2: [sde] Attached SCSI removable disk
[ 3.080054] usb 7-1: device descriptor read/64, error -71
[ 3.219598] device-mapper: uevent: version 1.0.3
[ 3.219648] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 3.304076] usb 7-1: device descriptor read/64, error -71
[ 3.311116] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.520034] usb 7-1: new full-speed USB device number 3 using uhci_hcd
[ 3.640033] usb 7-1: device descriptor read/64, error -71
[ 3.864031] usb 7-1: device descriptor read/64, error -71
[ 4.080053] usb 7-1: new full-speed USB device number 4 using uhci_hcd
[ 4.488030] usb 7-1: device not accepting address 4, error -71
[ 4.600054] usb 7-1: new full-speed USB device number 5 using uhci_hcd
[ 4.710201] udevd[323]: starting version 175
[ 5.008031] usb 7-1: device not accepting address 5, error -71
[ 5.008075] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 5.370370] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 5.370375] ACPI: Power Button [PWRB]
[ 5.370442] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 5.370445] ACPI: Power Button [PWRF]
[ 5.648130] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 5.655960] parport_pc 00:07: reported by Plug and Play ACPI
[ 5.656004] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 5.738936] iTCO_vendor_support: vendor-support=0
[ 5.758187] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 5.758261] iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
[ 5.758342] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.810970] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 6.450639] nvidia: module license 'NVIDIA' taints kernel.
[ 6.450642] Disabling lock debugging due to kernel taint
[ 6.494882] snd_hda_intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 6.494925] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
[ 6.494948] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 6.763733] Linux media interface: v0.10
[ 6.764665] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.764674] nvidia 0000:01:00.0: setting latency timer to 64
[ 6.764678] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 6.764860] NVRM: loading NVIDIA UNIX x86 Kernel Module 295.33 Sat Mar 17 14:56:23 PDT 2012
[ 6.773400] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input5
[ 6.832106] Linux video capture interface: v2.00
[ 6.965741] pwc: Logitech QuickCam 4000 Pro USB webcam detected.
[ 7.157714] pwc: Registered as video0.
[ 7.157775] input: PWC snapshot button as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/input/input6
[ 7.157991] usbcore: registered new interface driver Philips webcam
[ 7.215074] usbcore: registered new interface driver snd-usb-audio
[ 8.338109] Adding 5855688k swap on /dev/sda2. Priority:-1 extents:1 across:5855688k
[ 8.343205] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 8.465414] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 8.578547] loop: module loaded
[ 8.608810] coretemp coretemp.0: Using relative temperature scale!
[ 8.608822] coretemp coretemp.0: Using relative temperature scale!
[ 53.184618] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 53.238288] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
[ 53.287112] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 53.302272] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 53.747025] sky2 0000:04:00.0: eth0: enabling interface
[ 53.747183] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 56.110220] sky2 0000:04:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 56.110332] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 63.658096] RPC: Registered named UNIX socket transport module.
[ 63.658098] RPC: Registered udp transport module.
[ 63.658100] RPC: Registered tcp transport module.
[ 63.658102] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 63.684894] FS-Cache: Loaded
[ 63.712632] FS-Cache: Netfs 'nfs' registered for caching
[ 63.724994] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 66.480049] eth0: no IPv6 routers present
[ 67.887995] fuse init (API version 7.17)
[ 74.418606] lp0: using parport0 (interrupt-driven).
[ 74.423844] ppdev: user-space parallel port driver
[ 75.704018] usb 7-1: new full-speed USB device number 6 using uhci_hcd
[ 75.824139] usb 7-1: device descriptor read/64, error -71
[ 76.048042] usb 7-1: device descriptor read/64, error -71
[ 76.264036] usb 7-1: new full-speed USB device number 7 using uhci_hcd
[ 76.384033] usb 7-1: device descriptor read/64, error -71
[ 76.608036] usb 7-1: device descriptor read/64, error -71
[ 76.824094] usb 7-1: new full-speed USB device number 8 using uhci_hcd
[ 77.232033] usb 7-1: device not accepting address 8, error -71
[ 77.344025] usb 7-1: new full-speed USB device number 9 using uhci_hcd
[ 77.752064] usb 7-1: device not accepting address 9, error -71
[ 77.752080] hub 7-0:1.0: unable to enumerate USB device on port 1
[ 83.267470] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[ 83.267635] DECnet: Routing cache hash table of 1024 buckets, 8Kbytes
[ 83.267641] NET: Registered protocol family 12
[ 120.870003] postgres (3090): /proc/3090/oom_adj is deprecated, please use /proc/3090/oom_score_adj instead.
[ 124.956450] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 124.965472] NFSD: starting 90-second grace period
[ 125.322028] vboxdrv: Found 2 processor cores.
[ 125.322128] vboxdrv: fAsync=0 offMin=0x1f1 offMax=0x803
[ 125.322176] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 125.322178] vboxdrv: Successfully loaded version 4.1.10 (interface 0x00190000).
[ 125.561700] vboxpci: IOMMU not found (not registered)
[ 131.959492] Intel AES-NI instructions are not detected.
[ 132.172902] FAT-fs (dm-4): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
Hum, bizarre pas de trace de CD dessus, je ne vois que ça
[quote][ 2.376049] ata7: SATA link down (SStatus 0 SControl 300)
[ 2.376081] ata8: SATA link down (SStatus 0 SControl 300)
[ 2.388033] ata3.01: hard resetting link
[/quote]de curieux.
Que se passe-t-il si tu charges le module ide-cd à la main (si c’est celui là qui s’occupe de ton CD) (message d’erreurs? Que donne le syslog et dmesg dans ce cas…)
Sinon repasse au noyau précédent, le temps que le pbm soit réglé
Désolé de la réponse tardive, j’ai eu un fils entre temps 
Je crois me rappeler avoir tenté de charger manuellement ide-cd, mais je n’ai pas observé les logs du boot. Je vais refaire une tentative, et sinon je reviendrai au vieux noyau, en attendant une maj.
Merci pour les pistes.
Problème “solutionné” avec la mise à jour de ce matin.
EDIT : Bug sur le forum ? Impossible de mettre “r é s o l u” dans le corps du message ?
Si, tu peux écrire “résolu”, la preuve.
Ce que tu ne peux pas faire, c’est l’écrire en majuscules.
La raison : pour que les débutants apprennent à se servir le la coche verte, à la place de l’ajout de ‘résolu’ en MAJ dans le titre.
EDIT :
Il y a en effet un bogue car il ne tient plus compte de la casse, ce qui n’était pas le cas avant.
J’ai supprimé.
[quote=“ricardo”]Si, tu peux écrire “résolu”, la preuve.
Ce que tu ne peux pas faire, c’est l’écrire en majuscules.
La raison : pour que les débutants apprennent à se servir le la coche verte, à la place de l’ajout de ‘résolu’ en MAJ dans le titre.
EDIT :
Il y a en effet un bogue car il ne tient plus compte de la casse, ce qui n’était pas le cas avant.
J’ai supprimé.[/quote]
Dommage, c’était bien ce truc…
[quote=“lol”][quote=“ricardo”]Si, tu peux écrire “résolu”, la preuve.
Ce que tu ne peux pas faire, c’est l’écrire en majuscules.
La raison : pour que les débutants apprennent à se servir le la coche verte, à la place de l’ajout de ‘résolu’ en MAJ dans le titre.
EDIT :
Il y a en effet un bogue car il ne tient plus compte de la casse, ce qui n’était pas le cas avant.
J’ai supprimé.[/quote]
Dommage, c’était bien ce truc… [/quote]
Ben oui mais il est difficile d’interdire l’emploi d’un mot comme résolu dans du texte.
Je vais pratiquer autrement et j’invite tous ceux qui le veulent à faire de même :
Si un quelconque ajout de “résolu”, que ce soit en MAJ ou pas, dans le titre :
1/ réponse à la suite du fil :
"Lis ça : http://www.debian-fr.org/a-lire-avant-de-poster-t4657.html
2/ même ligne envoyé en MP à l’auteur du fil.
Si toutefois le membre ne tiens pas compte de ces recommandations, ses prochains fils seront verrouillés sitôt que possible.