Disk externe usb introuvable

Support Debian
#1

Ola \o

voila j’ai plein de periphs usb et elles sont toutes reconnus par ma debian wheezy 7.8.0 xfce , mais voila qu’on me file un disk pour que je puisse recupérer un dossier et y’a rien qui s’affiche:

j’ai juste :

root@debian:/home/angel# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 174c:55aa ASMedia Technology Inc. <----------------------- celui là
root@debian:/home/angel# fdisk -l

Disk /dev/sda: 160 GB, 160039272960 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 1 19458 156296353 83 Linux
Warning: Partition 1 does not end on cylinder boundary.

Disk /dev/sdb: 81 GB, 81956689920 bytes
255 heads, 63 sectors/track, 9964 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdb1 * 1 9556 76758538 83 Linux
Warning: Partition 1 does not end on cylinder boundary.
/dev/sdb2 9556 9965 3285292 5 Extended
Warning: Partition 2 does not end on cylinder boundary.
/dev/sdb5 9556 9965 3285292 82 Linux swap
Warning: Partition 5 does not end on cylinder boundary.
Error: /dev/fd0: unrecognised disk label <------------------------------- ça doit être lui !!!

root@debian:/home/angel# lsblk
NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
fd0 2:0 1 4K 0 disk
sda 8:0 0 149,1G 0 disk
└─sda1 8:1 0 149,1G 0 part /media/save
sdb 8:16 0 76,3G 0 disk
├─sdb1 8:17 0 73,2G 0 part /
├─sdb2 8:18 0 1K 0 part
└─sdb5 8:21 0 3,1G 0 part [SWAP]
sr0 11:0 1 1024M 0 rom

heuuu! je fais comment pour l’ouvrir ?

THX

#2

quote="angelique"
root@debian:/home/angel# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 174c:55aa ASMedia Technology Inc. <----------------------- celui là
[/quote]
Certainement !
Mais rien ne le prouve !

[quote=“angelique”]
root@debian:/home/angel# fdisk -l

(…)
Warning: Partition 5 does not end on cylinder boundary.
Error: /dev/fd0: unrecognised disk label <------------------------------- ça doit être lui !!!

(…)[/quote]

Aucunément !

/dev/fd0 est le fichier périphérique relatif à … un lecteur de disquette !!!

Ce ne peut pas être lui :wink:

Tu débranches la clé - pardon, le disk - en question … puis la rebranches et dans l’instant, tu tapes cette commande suivante dans ton terminal console préféré :

Que tu nous restitue … :wink:

#3

Merci de ta réponse

gparted le voit pas … j’ai rien dans /media

root@debian:/home/angel# dmesg | grep -i “usb .* idVendor” | tail -1
[ 2503.721792] usb 1-6: New USB device found, idVendor=174c, idProduct=55aa

je t’ai rajouté :

root@debian:/home/angel# dmesg | grep USB
[ 1.376560] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.412750] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
[ 1.425079] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00
[ 1.425127] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.425131] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.425371] hub 1-0:1.0: USB hub found
[ 1.426050] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 1.426130] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 1.482085] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.482091] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.482304] hub 2-0:1.0: USB hub found
[ 1.498752] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 3
[ 1.554164] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.554171] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.554400] hub 3-0:1.0: USB hub found
[ 154.668033] usb 1-6: new high-speed USB device number 2 using ehci_hcd
[ 155.166000] usb 1-6: New USB device found, idVendor=174c, idProduct=55aa
[ 155.166006] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 155.314211] Initializing USB Mass Storage driver…
[ 155.321649] USB Mass Storage support registered.
[ 1320.611496] usb 1-6: USB disconnect, device number 2
[ 2144.056028] usb 1-6: new high-speed USB device number 3 using ehci_hcd
[ 2144.553851] usb 1-6: New USB device found, idVendor=174c, idProduct=55aa
[ 2144.553857] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 2489.862546] usb 1-6: USB disconnect, device number 3
[ 2503.224021] usb 1-6: new high-speed USB device number 4 using ehci_hcd
[ 2503.721792] usb 1-6: New USB device found, idVendor=174c, idProduct=55aa
[ 2503.721799] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1

#4

Donc, on est d’accord, cela semble bien être le périphérique en question …

Mais plutôt que “dmesg | grep usb”, je préfèrerais un “dmesg | tail -10” juste après la connexion … plus utile :wink:

#5

OK pas de souçis :wink:

root@debian:/home/angel# dmesg | tail -10
[ 3087.768016] usb 1-6: new high-speed USB device number 6 using ehci_hcd
[ 3088.261981] usb 1-6: New USB device found, idVendor=174c, idProduct=55aa
[ 3088.261988] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 3088.261993] usb 1-6: Product: MS
[ 3088.261996] usb 1-6: Manufacturer:
[ 3088.261999] usb 1-6: SerialNumber: 12345678942B
[ 3088.263004] scsi8 : usb-storage 1-6:1.0
[ 3089.478033] scsi 8:0:0:0: Direct-Access MS 0 PQ: 0 ANSI: 6
[ 3089.480904] sd 8:0:0:0: Attached scsi generic sg3 type 0
[ 3089.485764] sd 8:0:0:0: [sdc] Spinning up disk…
root@debian:/home/angel#

#6

[quote=“angelique”]OK pas de souçis :wink:

root@debian:/home/angel# dmesg | tail -10
(…)
[ 3089.485764] sd 8:0:0:0: [sdc] Spinning up disk…
root@debian:/home/angel#[/quote]

Donc, à-priori, le périphérique est “stocké” dans /dev/sdc :wink:

Maintenant, on vas chercher à savoir quel système de fichier, avec cette commande que tu as précédemment utilisé, modifiée légèrement :

PS : Pardon, à faire avec des droits admins :wink:

#7 
[quote]-w, --follow
              [mono]Attendre de nouveaux messages[/mono]. Cette fonctionnalité n’est prise en charge que sur les systèmes avec un /dev/kmsg lisible ([mono]depuis le noyau 3.5.0[/mono]).
[/quote]

[quote]-w, --follow
[mono]Attendre de nouveaux messages[/mono]. Cette fonctionnalité n’est prise en charge que sur les systèmes avec un /dev/kmsg lisible ([mono]depuis le noyau 3.5.0[/mono]).
[/quote]

#8

Bon je me suis arrangée en bootant sur un PE livecd Windows -_- , le disk se montait bien, j’ai recup le dossier dessus.

root@debian:/home/angel# dmesg | tail -10
[ 6615.412019] usb 1-6: new high-speed USB device number 4 using ehci_hcd
[ 6615.929901] usb 1-6: New USB device found, idVendor=174c, idProduct=55aa
[ 6615.929907] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 6615.929911] usb 1-6: Product: MS
[ 6615.929914] usb 1-6: Manufacturer:
[ 6615.929916] usb 1-6: SerialNumber: 12345678942B
[ 6615.930893] scsi6 : usb-storage 1-6:1.0
[ 6617.143945] scsi 6:0:0:0: Direct-Access MS 0 PQ: 0 ANSI: 6
[ 6617.146730] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 6617.150987] sd 6:0:0:0: [sdc] Spinning up disk…
root@debian:/home/angel# fdisk -l /dev/sdc
Unable to open /dev/sdc

Disk /dev/sda: 160 GB, 160039272960 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sda1 1 19458 156296353 83 Linux
Warning: Partition 1 does not end on cylinder boundary.

Disk /dev/sdb: 81 GB, 81956689920 bytes
255 heads, 63 sectors/track, 9964 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

Device Boot Start End Blocks Id System
/dev/sdb1 * 1 9556 76758538 83 Linux
Warning: Partition 1 does not end on cylinder boundary.
/dev/sdb2 9556 9965 3285292 5 Extended
Warning: Partition 2 does not end on cylinder boundary.
/dev/sdb5 9556 9965 3285292 82 Linux swap
Warning: Partition 5 does not end on cylinder boundary.
Error: /dev/fd0: unrecognised disk label

#9

C’est bizarre que sous Windows, tu l’aies vue … mais pas sous Debian.

Quel système de fichier est dessus ? Fat(32) ? NTFS ?

Ça serait bien de comprendre pourquoi sous Debian, ce disque ne soit pas monté, non ?!

#10

Ouai ça serait bien de savoir certes :slightly_smiling: sous windows , systeme de fichier ntfs

sous windows c’est le volume 2:

DISKPART> list volume

Volume ### Ltr Nom Fs Type Taille Statut Info

Volume 0 D DVD-ROM 0 B
Volume 1 C NTFS Partition 149 GB Sain Système
Volume 2 E Tx NTFS Partition 466 GB Sain

c’est celui là > promo-conso.net/produit_zoom … 5002&y=337

à cause de USB 3 ?

#11

À tout hasard, vérifies que tu aies l-outil ntfs-3g qui soit installé ! ???

#12

Oui j’ai

root@debian:/home/angel# apt-cache policy ntfs-3g
ntfs-3g:
Installé : 1:2012.1.15AR.5-2.1+deb7u2
Candidat : 1:2012.1.15AR.5-2.1+deb7u2
Table de version :
*** 1:2012.1.15AR.5-2.1+deb7u2 0
500 security.debian.org/ wheezy/updates/main i386 Packages
100 /var/lib/dpkg/status
1:2012.1.15AR.5-2.1 0
500 ftp.fr.debian.org/debian/ wheezy/main i386 Packages

#13

[quote=“PengouinPdt”]
Quel système de fichier est dessus ? Fat(32) ? NTFS ?

Ça serait bien de comprendre pourquoi sous Debian, ce disque ne soit pas monté, non ?![/quote]
Peu importe le système de fichiers. C’est le disque lui-même qui n’est pas reconnu correctement. Il manque visiblement une série de messages du noyau identifiant le disque, ses caractéristiques…

#14

quote="PascalHambourg"
Peu importe le système de fichiers. C’est le disque lui-même qui n’est pas reconnu correctement. Il manque visiblement une série de messages du noyau identifiant le disque, ses caractéristiques…[/quote]

C’est ce que je présuppose … de sa non-reconnaissance ! C’est même ma première idée … mais vérifier ce qu’il en est au niveau sous-système, et/ou que certains binaires soient installés, voire restituent certaines informations ne fait pas de mal, non ?!

Néanmoins, le sous-système USB semble le détecter.

@angel, restitue, stp, le résultat de cette commande, avec des droits admin :

et l’ensemble de dmessg, et du fichier journal /var/log/kern.log :wink:

#15

oki

root@debian:/home/angel# lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 006: ID 174c:55aa ASMedia Technology Inc.
root@debian:/home/angel# lsusb -D /dev/bus/usb/$(lsusb | grep “174c” | awk ‘{ print $2"/"substr($4,0,3)}’)
Cannot open /dev/bus/usb/001/00

par contre dmesg tout court j’ai pas l’impression que tout passe

ça commence là

[ 6554.912071]  7 80 1562976
[ 6554.912073]  0 90 1562976
[ 6554.912075]  8 81 1562976
[ 6554.912077] e6 80 1562976
[ 6554.912080]  0 90 1562976
[ 6554.912082]  0 90 1562976
[ 6554.912084]  0 90 1562976
[ 6554.912086]  1 90 1562976
[ 6554.912089]  2 90 1562976
[ 6554.912091] 12 90 1562976
[ 6554.912093] 1b 90 1562976
[ 6554.912095] ff 90 1562976
[ 6554.912098] last result at 1562976
[ 6554.912100] last redo_fd_request at 1562976
[ 6554.912104] 20 00                                             .
[ 6554.912112] status=50
[ 6554.912114] fdc_busy=1
[ 6554.912120] do_floppy=main_command_interrupt
[ 6554.912125] fd_timer.function=fd_watchdog
[ 6554.912128] cont=f8434080
[ 6554.912130] current_req=f2774ee0
[ 6554.912132] command_status=-1
[ 6554.912134] 
[ 6554.912138] floppy0: floppy timeout called
[ 6554.912144] end_request: I/O error, dev fd0, sector 0
[ 6554.912151] Buffer I/O error on device fd0, logical block 0
[ 6555.612020] ..
[ 6557.920007] 
[ 6557.920013] floppy driver state
[ 6557.920015] -------------------
[ 6557.920044] now=1564480 last interrupt=1563728 diff=752 last called handler=recal_interrupt
[ 6557.920047] timeout_message=floppy start
[ 6557.920050] last output bytes:
[ 6557.920052]  0 90 1563728
[ 6557.920055] 13 90 1563728
[ 6557.920057]  0 90 1563728
[ 6557.920059] 1a 90 1563728
[ 6557.920061]  0 90 1563728
[ 6557.920063]  3 90 1563728
[ 6557.920066] c1 90 1563728
[ 6557.920068] 10 90 1563728
[ 6557.920070]  7 80 1563728
[ 6557.920072]  0 90 1563728
[ 6557.920074]  8 81 1563728
[ 6557.920077] e6 80 1563728
[ 6557.920079]  0 90 1563728
[ 6557.920081]  0 90 1563728
[ 6557.920083]  0 90 1563728
[ 6557.920085]  1 90 1563728
[ 6557.920087]  2 90 1563728
[ 6557.920090] 12 90 1563728
[ 6557.920092] 1b 90 1563728
[ 6557.920094] ff 90 1563728
[ 6557.920096] last result at 1563728
[ 6557.920098] last redo_fd_request at 1563728
[ 6557.920102] 20 00                                             .
[ 6557.920111] status=50
[ 6557.920113] fdc_busy=1
[ 6557.920118] do_floppy=main_command_interrupt
[ 6557.920123] fd_timer.function=fd_watchdog
[ 6557.920126] cont=f8434080
[ 6557.920128] current_req=f2774ee0
[ 6557.920130] command_status=-1
[ 6557.920132] 
[ 6557.920135] floppy0: floppy timeout called
[ 6557.920142] end_request: I/O error, dev fd0, sector 0
[ 6557.920149] Buffer I/O error on device fd0, logical block 0
[ 6558.080025] ......not responding...
[ 6585.455842] sd 5:0:0:0: [sdc] READ CAPACITY failed
[ 6585.455848] sd 5:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 6585.455854] sd 5:0:0:0: [sdc]  Sense Key : Not Ready [current] 
[ 6585.455859] sd 5:0:0:0: [sdc]  Add. Sense: Logical unit is in process of becoming ready
[ 6592.447430] sd 5:0:0:0: [sdc] Test WP failed, assume Write Enabled
[ 6599.438899] sd 5:0:0:0: [sdc] Asking for cache data failed
[ 6599.438906] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 6599.445752] sd 5:0:0:0: [sdc] Spinning up disk.......
[ 6611.488790] usb 1-6: USB disconnect, device number 3
[ 6612.368012] .ready
[ 6612.368085] sd 5:0:0:0: [sdc] READ CAPACITY failed
[ 6612.368089] sd 5:0:0:0: [sdc]  Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 6612.368095] sd 5:0:0:0: [sdc] Sense not available.
[ 6612.368128] sd 5:0:0:0: [sdc] Asking for cache data failed
[ 6612.368133] sd 5:0:0:0: [sdc] Assuming drive cache: write through
[ 6612.368138] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 6615.412019] usb 1-6: new high-speed USB device number 4 using ehci_hcd
[ 6615.929901] usb 1-6: New USB device found, idVendor=174c, idProduct=55aa
[ 6615.929907] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 6615.929911] usb 1-6: Product: MS
[ 6615.929914] usb 1-6: Manufacturer:  
[ 6615.929916] usb 1-6: SerialNumber: 12345678942B
[ 6615.930893] scsi6 : usb-storage 1-6:1.0
[ 6617.143945] scsi 6:0:0:0: Direct-Access              MS               0    PQ: 0 ANSI: 6
[ 6617.146730] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 6617.150987] sd 6:0:0:0: [sdc] Spinning up disk.....................................................................................not responding...
[ 6739.301708] sd 6:0:0:0: [sdc] READ CAPACITY failed
[ 6739.301715] sd 6:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 6739.301720] sd 6:0:0:0: [sdc]  Sense Key : Not Ready [current] 
[ 6739.301725] sd 6:0:0:0: [sdc]  Add. Sense: Logical unit is in process of becoming ready
[ 6746.290180] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
[ 6753.282899] sd 6:0:0:0: [sdc] Asking for cache data failed
[ 6753.282907] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 6753.289259] sd 6:0:0:0: [sdc] Spinning up disk.............
[ 6774.360010] 
[ 6774.360015] floppy driver state
[ 6774.360017] -------------------
[ 6774.360047] now=1618590 last interrupt=1617748 diff=842 last called handler=recal_interrupt
[ 6774.360051] timeout_message=floppy start
[ 6774.360053] last output bytes:
[ 6774.360055]  0 90 1617748
[ 6774.360058] 13 90 1617748
[ 6774.360060]  0 90 1617748
[ 6774.360063] 1a 90 1617748
[ 6774.360065]  0 90 1617748
[ 6774.360067]  3 90 1617748
[ 6774.360069] c1 90 1617748
[ 6774.360072] 10 90 1617748
[ 6774.360074]  7 80 1617748
[ 6774.360076]  0 90 1617748
[ 6774.360078]  8 81 1617748
[ 6774.360081] e6 80 1617843
[ 6774.360083]  0 90 1617843
[ 6774.360085]  0 90 1617843
[ 6774.360087]  0 90 1617843
[ 6774.360090]  1 90 1617843
[ 6774.360092]  2 90 1617843
[ 6774.360094] 12 90 1617843
[ 6774.360097] 1b 90 1617843
[ 6774.360099] ff 90 1617843
[ 6774.360101] last result at 1617748
[ 6774.360103] last redo_fd_request at 1617748
[ 6774.360107] 20 00                                             .
[ 6774.360116] status=50
[ 6774.360118] fdc_busy=1
[ 6774.360123] do_floppy=main_command_interrupt
[ 6774.360129] fd_timer.function=fd_watchdog
[ 6774.360132] cont=f8434080
[ 6774.360134] current_req=f4db86b8
[ 6774.360136] command_status=-1
[ 6774.360138] 
[ 6774.360142] floppy0: floppy timeout called
[ 6774.360148] end_request: I/O error, dev fd0, sector 0
[ 6777.376007] 
[ 6777.376012] floppy driver state
[ 6777.376014] -------------------
[ 6777.376044] now=1619344 last interrupt=1618593 diff=751 last called handler=recal_interrupt
[ 6777.376047] timeout_message=floppy start
[ 6777.376049] last output bytes:
[ 6777.376052]  0 90 1618593
[ 6777.376055] 13 90 1618593
[ 6777.376057]  0 90 1618593
[ 6777.376059] 1a 90 1618593
[ 6777.376061]  0 90 1618593
[ 6777.376064]  3 90 1618593
[ 6777.376066] c1 90 1618593
[ 6777.376068] 10 90 1618593
[ 6777.376070]  7 80 1618593
[ 6777.376073]  0 90 1618593
[ 6777.376075]  8 81 1618593
[ 6777.376077] e6 80 1618593
[ 6777.376079]  0 90 1618593
[ 6777.376081]  0 90 1618593
[ 6777.376084]  0 90 1618593
[ 6777.376086]  1 90 1618593
[ 6777.376088]  2 90 1618593
[ 6777.376090] 12 90 1618593
[ 6777.376092] 1b 90 1618593
[ 6777.376095] ff 90 1618593
[ 6777.376097] last result at 1618593
[ 6777.376099] last redo_fd_request at 1618593
[ 6777.376103] 20 00                                             .
[ 6777.376111] status=50
[ 6777.376113] fdc_busy=1
[ 6777.376119] do_floppy=main_command_interrupt
[ 6777.376124] fd_timer.function=fd_watchdog
[ 6777.376127] cont=f8434080
[ 6777.376129] current_req=f4db8230
[ 6777.376131] command_status=-1
[ 6777.376133] 
[ 6777.376136] floppy0: floppy timeout called
[ 6777.376143] end_request: I/O error, dev fd0, sector 0
[ 6778.976019] ..
[ 6780.384009] 
[ 6780.384015] floppy driver state
[ 6780.384017] -------------------
[ 6780.384046] now=1620096 last interrupt=1619344 diff=752 last called handler=recal_interrupt
[ 6780.384072] timeout_message=floppy start
[ 6780.384074] last output bytes:
[ 6780.384077]  0 90 1619344
[ 6780.384080] 13 90 1619344
[ 6780.384082]  0 90 1619344
[ 6780.384085] 1a 90 1619344
[ 6780.384087]  0 90 1619344
[ 6780.384089]  3 90 1619344
[ 6780.384092] c1 90 1619344
[ 6780.384094] 10 90 1619344
[ 6780.384096]  7 80 1619344
[ 6780.384099]  0 90 1619344
[ 6780.384101]  8 81 1619344
[ 6780.384103] e6 80 1619344
[ 6780.384106]  0 90 1619344
[ 6780.384108]  0 90 1619344
[ 6780.384110]  0 90 1619344
[ 6780.384113]  1 90 1619344
[ 6780.384115]  2 90 1619344
[ 6780.384117] 12 90 1619344
[ 6780.384120] 1b 90 1619344
[ 6780.384122] ff 90 1619344
[ 6780.384124] last result at 1619344
[ 6780.384126] last redo_fd_request at 1619344
[ 6780.384131] 20 00                                             .
[ 6780.384139] status=50
[ 6780.384141] fdc_busy=1
[ 6780.384147] do_floppy=main_command_interrupt
[ 6780.384153] fd_timer.function=fd_watchdog
[ 6780.384156] cont=f8434080
[ 6780.384158] current_req=f4db8230
[ 6780.384160] command_status=-1
[ 6780.384162] 
[ 6780.384166] floppy0: floppy timeout called
[ 6780.384172] end_request: I/O error, dev fd0, sector 0
[ 6780.384180] Buffer I/O error on device fd0, logical block 0
[ 6781.436014] ..
[ 6783.392007] 
[ 6783.392012] floppy driver state
[ 6783.392014] -------------------
[ 6783.392043] now=1620848 last interrupt=1620096 diff=752 last called handler=recal_interrupt
[ 6783.392047] timeout_message=floppy start
[ 6783.392049] last output bytes:
[ 6783.392052]  0 90 1620096
[ 6783.392054] 13 90 1620096
[ 6783.392057]  0 90 1620096
[ 6783.392059] 1a 90 1620096
[ 6783.392061]  0 90 1620096
[ 6783.392063]  3 90 1620096
[ 6783.392065] c1 90 1620096
[ 6783.392068] 10 90 1620096
[ 6783.392070]  7 80 1620096
[ 6783.392072]  0 90 1620096
[ 6783.392074]  8 81 1620096
[ 6783.392077] e6 80 1620096
[ 6783.392079]  0 90 1620096
[ 6783.392081]  0 90 1620096
[ 6783.392083]  0 90 1620096
[ 6783.392086]  1 90 1620096
[ 6783.392088]  2 90 1620096
[ 6783.392090] 12 90 1620096
[ 6783.392092] 1b 90 1620096
[ 6783.392095] ff 90 1620096
[ 6783.392097] last result at 1620096
[ 6783.392099] last redo_fd_request at 1620096
[ 6783.392103] 20 00                                             .
[ 6783.392111] status=50
[ 6783.392113] fdc_busy=1
[ 6783.392119] do_floppy=main_command_interrupt
[ 6783.392125] fd_timer.function=fd_watchdog
[ 6783.392127] cont=f8434080
[ 6783.392129] current_req=f4db8230
[ 6783.392131] command_status=-1
[ 6783.392133] 
[ 6783.392137] floppy0: floppy timeout called
[ 6783.392143] end_request: I/O error, dev fd0, sector 0
[ 6783.392151] Buffer I/O error on device fd0, logical block 0
[ 6783.904012] ...
[ 6786.400005] 
[ 6786.400009] floppy driver state
[ 6786.400011] -------------------
[ 6786.400042] now=1621600 last interrupt=1620848 diff=752 last called handler=recal_interrupt
[ 6786.400045] timeout_message=floppy start
[ 6786.400047] last output bytes:
[ 6786.400050]  0 90 1620848
[ 6786.400053] 13 90 1620848
[ 6786.400055]  0 90 1620848
[ 6786.400058] 1a 90 1620848
[ 6786.400060]  0 90 1620848
[ 6786.400063]  3 90 1620848
[ 6786.400065] c1 90 1620848
[ 6786.400068] 10 90 1620848
[ 6786.400070]  7 80 1620848
[ 6786.400072]  0 90 1620848
[ 6786.400075]  8 81 1620848
[ 6786.400077] e6 80 1620848
[ 6786.400080]  0 90 1620848
[ 6786.400082]  0 90 1620848
[ 6786.400084]  0 90 1620848
[ 6786.400087]  1 90 1620848
[ 6786.400089]  2 90 1620848
[ 6786.400092] 12 90 1620848
[ 6786.400094] 1b 90 1620848
[ 6786.400096] ff 90 1620848
[ 6786.400099] last result at 1620848
[ 6786.400101] last redo_fd_request at 1620848
[ 6786.400105] 20 00                                             .
[ 6786.400114] status=50
[ 6786.400116] fdc_busy=1
[ 6786.400121] do_floppy=main_command_interrupt
[ 6786.400127] fd_timer.function=fd_watchdog
[ 6786.400130] cont=f8434080
[ 6786.400132] current_req=f4db8230
[ 6786.400134] command_status=-1
[ 6786.400136] 
[ 6786.400140] floppy0: floppy timeout called
[ 6786.400146] end_request: I/O error, dev fd0, sector 0
[ 6786.400154] Buffer I/O error on device fd0, logical block 0
[ 6787.604014] ..
[ 6789.408007] 
[ 6789.408013] floppy driver state
[ 6789.408015] -------------------
[ 6789.408044] now=1622352 last interrupt=1621600 diff=752 last called handler=recal_interrupt
[ 6789.408047] timeout_message=floppy start
[ 6789.408050] last output bytes:
[ 6789.408053]  0 90 1621600
[ 6789.408055] 13 90 1621600
[ 6789.408057]  0 90 1621600
[ 6789.408060] 1a 90 1621600
[ 6789.408062]  0 90 1621600
[ 6789.408064]  3 90 1621600
[ 6789.408066] c1 90 1621600
[ 6789.408069] 10 90 1621600
[ 6789.408071]  7 80 1621600
[ 6789.408073]  0 90 1621600
[ 6789.408075]  8 81 1621600
[ 6789.408078] e6 80 1621600
[ 6789.408080]  0 90 1621600
[ 6789.408082]  0 90 1621600
[ 6789.408084]  0 90 1621600
[ 6789.408087]  1 90 1621600
[ 6789.408089]  2 90 1621600
[ 6789.408091] 12 90 1621600
[ 6789.408093] 1b 90 1621600
[ 6789.408096] ff 90 1621600
[ 6789.408098] last result at 1621600
[ 6789.408100] last redo_fd_request at 1621600
[ 6789.408104] 20 00                                             .
[ 6789.408113] status=50
[ 6789.408115] fdc_busy=1
[ 6789.408120] do_floppy=main_command_interrupt
[ 6789.408126] fd_timer.function=fd_watchdog
[ 6789.408128] cont=f8434080
[ 6789.408130] current_req=f4db8230
[ 6789.408133] command_status=-1
[ 6789.408134] 
[ 6789.408138] floppy0: floppy timeout called
[ 6789.408145] end_request: I/O error, dev fd0, sector 0
[ 6789.408153] Buffer I/O error on device fd0, logical block 0
[ 6789.410480] floppy0: unexpected interrupt 
[ 6789.410547] floppy0: sensei repl[0]=80 
[ 6790.072014] ..
[ 6792.416007] 
[ 6792.416012] floppy driver state
[ 6792.416014] -------------------
[ 6792.416044] now=1623104 last interrupt=1622353 diff=751 last called handler=recal_interrupt
[ 6792.416047] timeout_message=floppy start
[ 6792.416050] last output bytes:
[ 6792.416053]  0 90 1622353
[ 6792.416055] 13 90 1622353
[ 6792.416057]  0 90 1622353
[ 6792.416059] 1a 90 1622353
[ 6792.416062]  0 90 1622353
[ 6792.416064]  3 90 1622353
[ 6792.416066] c1 90 1622353
[ 6792.416068] 10 90 1622353
[ 6792.416070]  7 80 1622353
[ 6792.416073]  0 90 1622353
[ 6792.416075]  8 81 1622353
[ 6792.416077] e6 80 1622353
[ 6792.416079]  0 90 1622353
[ 6792.416082]  0 90 1622353
[ 6792.416084]  0 90 1622353
[ 6792.416086]  1 90 1622353
[ 6792.416088]  2 90 1622353
[ 6792.416090] 12 90 1622353
[ 6792.416093] 1b 90 1622353
[ 6792.416095] ff 90 1622353
[ 6792.416097] last result at 1622353
[ 6792.416099] last redo_fd_request at 1622353
[ 6792.416103] 20 00                                             .
[ 6792.416112] status=50
[ 6792.416114] fdc_busy=1
[ 6792.416119] do_floppy=main_command_interrupt
[ 6792.416125] fd_timer.function=fd_watchdog
[ 6792.416127] cont=f8434080
[ 6792.416129] current_req=f4db8230
[ 6792.416131] command_status=-1
[ 6792.416133] 
[ 6792.416137] floppy0: floppy timeout called
[ 6792.416143] end_request: I/O error, dev fd0, sector 0
[ 6792.416151] Buffer I/O error on device fd0, logical block 0
[ 6792.418478] floppy0: unexpected interrupt 
[ 6792.418545] floppy0: sensei repl[0]=80 
[ 6792.544010] ...
[ 6795.424008] 
[ 6795.424013] floppy driver state
[ 6795.424016] -------------------
[ 6795.424045] now=1623856 last interrupt=1623105 diff=751 last called handler=recal_interrupt
[ 6795.424049] timeout_message=floppy start
[ 6795.424051] last output bytes:
[ 6795.424054]  0 90 1623105
[ 6795.424056] 13 90 1623105
[ 6795.424059]  0 90 1623105
[ 6795.424061] 1a 90 1623105
[ 6795.424063]  0 90 1623105
[ 6795.424066]  3 90 1623105
[ 6795.424068] c1 90 1623105
[ 6795.424070] 10 90 1623105
[ 6795.424072]  7 80 1623105
[ 6795.424075]  0 90 1623105
[ 6795.424077]  8 81 1623105
[ 6795.424079] e6 80 1623105
[ 6795.424082]  0 90 1623105
[ 6795.424084]  0 90 1623105
[ 6795.424086]  0 90 1623105
[ 6795.424088]  1 90 1623105
[ 6795.424091]  2 90 1623105
[ 6795.424093] 12 90 1623105
[ 6795.424095] 1b 90 1623105
[ 6795.424097] ff 90 1623105
[ 6795.424100] last result at 1623105
[ 6795.424102] last redo_fd_request at 1623105
[ 6795.424106] 20 00                                             .
[ 6795.424114] status=50
[ 6795.424116] fdc_busy=1
[ 6795.424122] do_floppy=main_command_interrupt
[ 6795.424128] fd_timer.function=fd_watchdog
[ 6795.424130] cont=f8434080
[ 6795.424133] current_req=f4db8230
[ 6795.424135] command_status=-1
[ 6795.424137] 
[ 6795.424140] floppy0: floppy timeout called
[ 6795.424147] end_request: I/O error, dev fd0, sector 0
[ 6795.424155] Buffer I/O error on device fd0, logical block 0
[ 6796.244021] ..
[ 6798.432013] 
[ 6798.432017] floppy driver state
[ 6798.432019] -------------------
[ 6798.432051] now=1624608 last interrupt=1623856 diff=752 last called handler=recal_interrupt
[ 6798.432055] timeout_message=floppy start
[ 6798.432057] last output bytes:
[ 6798.432060]  0 90 1623856
[ 6798.432062] 13 90 1623856
[ 6798.432065]  0 90 1623856
[ 6798.432067] 1a 90 1623856
[ 6798.432069]  0 90 1623856
[ 6798.432071]  3 90 1623856
[ 6798.432074] c1 90 1623856
[ 6798.432076] 10 90 1623856
[ 6798.432078]  7 80 1623856
[ 6798.432080]  0 90 1623856
[ 6798.432083]  8 81 1623856
[ 6798.432085] e6 80 1623856
[ 6798.432087]  0 90 1623856
[ 6798.432089]  0 90 1623856
[ 6798.432091]  0 90 1623856
[ 6798.432094]  1 90 1623856
[ 6798.432096]  2 90 1623856
[ 6798.432098] 12 90 1623856
[ 6798.432100] 1b 90 1623856
[ 6798.432103] ff 90 1623856
[ 6798.432105] last result at 1623856
[ 6798.432107] last redo_fd_request at 1623856
[ 6798.432111] 20 00                                             .
[ 6798.432119] status=50
[ 6798.432121] fdc_busy=1
[ 6798.432127] do_floppy=main_command_interrupt
[ 6798.432133] fd_timer.function=fd_watchdog
[ 6798.432135] cont=f8434080
[ 6798.432137] current_req=f4db8230
[ 6798.432139] command_status=-1
[ 6798.432141] 
[ 6798.432145] floppy0: floppy timeout called
[ 6798.432152] end_request: I/O error, dev fd0, sector 0
[ 6798.432160] Buffer I/O error on device fd0, logical block 0
[ 6798.712026] ...
[ 6801.440007] 
[ 6801.440013] floppy driver state
[ 6801.440015] -------------------
[ 6801.440046] now=1625360 last interrupt=1624608 diff=752 last called handler=recal_interrupt
[ 6801.440049] timeout_message=floppy start
[ 6801.440052] last output bytes:
[ 6801.440054]  0 90 1624608
[ 6801.440057] 13 90 1624608
[ 6801.440059]  0 90 1624608
[ 6801.440061] 1a 90 1624608
[ 6801.440064]  0 90 1624608
[ 6801.440066]  3 90 1624608
[ 6801.440068] c1 90 1624608
[ 6801.440070] 10 90 1624608
[ 6801.440073]  7 80 1624608
[ 6801.440075]  0 90 1624608
[ 6801.440077]  8 81 1624608
[ 6801.440079] e6 80 1624608
[ 6801.440082]  0 90 1624608
[ 6801.440084]  0 90 1624608
[ 6801.440086]  0 90 1624608
[ 6801.440088]  1 90 1624608
[ 6801.440091]  2 90 1624608
[ 6801.440093] 12 90 1624608
[ 6801.440095] 1b 90 1624608
[ 6801.440098] ff 90 1624608
[ 6801.440100] last result at 1624608
[ 6801.440102] last redo_fd_request at 1624608
[ 6801.440106] 20 00                                             .
[ 6801.440114] status=50
[ 6801.440116] fdc_busy=1
[ 6801.440122] do_floppy=main_command_interrupt
[ 6801.440128] fd_timer.function=fd_watchdog
[ 6801.440130] cont=f8434080
[ 6801.440132] current_req=f4db8230
[ 6801.440135] command_status=-1
[ 6801.440136] 
[ 6801.440140] floppy0: floppy timeout called
[ 6801.440146] end_request: I/O error, dev fd0, sector 0
[ 6801.440154] Buffer I/O error on device fd0, logical block 0
[ 6802.416016] ..
[ 6804.448007] 
[ 6804.448013] floppy driver state
[ 6804.448015] -------------------
[ 6804.448044] now=1626112 last interrupt=1625360 diff=752 last called handler=recal_interrupt
[ 6804.448047] timeout_message=floppy start
[ 6804.448050] last output bytes:
[ 6804.448053]  0 90 1625360
[ 6804.448055] 13 90 1625360
[ 6804.448057]  0 90 1625360
[ 6804.448060] 1a 90 1625360
[ 6804.448062]  0 90 1625360
[ 6804.448064]  3 90 1625360
[ 6804.448066] c1 90 1625360
[ 6804.448069] 10 90 1625360
[ 6804.448071]  7 80 1625360
[ 6804.448073]  0 90 1625360
[ 6804.448075]  8 81 1625360
[ 6804.448078] e6 80 1625360
[ 6804.448080]  0 90 1625360
[ 6804.448082]  0 90 1625360
[ 6804.448084]  0 90 1625360
[ 6804.448087]  1 90 1625360
[ 6804.448089]  2 90 1625360
[ 6804.448091] 12 90 1625360
[ 6804.448093] 1b 90 1625360
[ 6804.448096] ff 90 1625360
[ 6804.448098] last result at 1625360
[ 6804.448100] last redo_fd_request at 1625360
[ 6804.448104] 20 00                                             .
[ 6804.448113] status=50
[ 6804.448115] fdc_busy=1
[ 6804.448120] do_floppy=main_command_interrupt
[ 6804.448126] fd_timer.function=fd_watchdog
[ 6804.448129] cont=f8434080
[ 6804.448131] current_req=f4db8230
[ 6804.448133] command_status=-1
[ 6804.448135] 
[ 6804.448138] floppy0: floppy timeout called
[ 6804.448145] end_request: I/O error, dev fd0, sector 0
[ 6804.448153] Buffer I/O error on device fd0, logical block 0
[ 6804.884053] ...
[ 6807.456007] 
[ 6807.456012] floppy driver state
[ 6807.456014] -------------------
[ 6807.456043] now=1626864 last interrupt=1626112 diff=752 last called handler=recal_interrupt
[ 6807.456047] timeout_message=floppy start
[ 6807.456049] last output bytes:
[ 6807.456052]  0 90 1626112
[ 6807.456054] 13 90 1626112
[ 6807.456057]  0 90 1626112
[ 6807.456059] 1a 90 1626112
[ 6807.456061]  0 90 1626112
[ 6807.456063]  3 90 1626112
[ 6807.456066] c1 90 1626112
[ 6807.456068] 10 90 1626112
[ 6807.456070]  7 80 1626112
[ 6807.456072]  0 90 1626112
[ 6807.456075]  8 81 1626112
[ 6807.456077] e6 80 1626112
[ 6807.456079]  0 90 1626112
[ 6807.456081]  0 90 1626112
[ 6807.456084]  0 90 1626112
[ 6807.456086]  1 90 1626112
[ 6807.456088]  2 90 1626112
[ 6807.456090] 12 90 1626112
[ 6807.456093] 1b 90 1626112
[ 6807.456095] ff 90 1626112
[ 6807.456097] last result at 1626112
[ 6807.456099] last redo_fd_request at 1626112
[ 6807.456103] 20 00                                             .
[ 6807.456112] status=50
[ 6807.456114] fdc_busy=1
[ 6807.456119] do_floppy=main_command_interrupt
[ 6807.456125] fd_timer.function=fd_watchdog
[ 6807.456128] cont=f8434080
[ 6807.456130] current_req=f4db8230
[ 6807.456132] command_status=-1
[ 6807.456134] 
[ 6807.456137] floppy0: floppy timeout called
[ 6807.456144] end_request: I/O error, dev fd0, sector 0
[ 6807.456152] Buffer I/O error on device fd0, logical block 0
[ 6808.584014] ..
[ 6810.464007] 
[ 6810.464013] floppy driver state
[ 6810.464015] -------------------
[ 6810.464045] now=1627616 last interrupt=1626864 diff=752 last called handler=recal_interrupt
[ 6810.464048] timeout_message=floppy start
[ 6810.464050] last output bytes:
[ 6810.464053]  0 90 1626864
[ 6810.464055] 13 90 1626864
[ 6810.464058]  0 90 1626864
[ 6810.464060] 1a 90 1626864
[ 6810.464062]  0 90 1626864
[ 6810.464064]  3 90 1626864
[ 6810.464066] c1 90 1626864
[ 6810.464069] 10 90 1626864
[ 6810.464071]  7 80 1626864
[ 6810.464073]  0 90 1626864
[ 6810.464075]  8 81 1626864
[ 6810.464077] e6 80 1626864
[ 6810.464080]  0 90 1626864
[ 6810.464082]  0 90 1626864
[ 6810.464084]  0 90 1626864
[ 6810.464086]  1 90 1626864
[ 6810.464088]  2 90 1626864
[ 6810.464091] 12 90 1626864
[ 6810.464093] 1b 90 1626864
[ 6810.464095] ff 90 1626864
[ 6810.464097] last result at 1626864
[ 6810.464099] last redo_fd_request at 1626864
[ 6810.464103] 20 00                                             .
[ 6810.464111] status=50
[ 6810.464113] fdc_busy=1
[ 6810.464119] do_floppy=main_command_interrupt
[ 6810.464124] fd_timer.function=fd_watchdog
[ 6810.464127] cont=f8434080
[ 6810.464129] current_req=f4db8230
[ 6810.464131] command_status=-1
[ 6810.464133] 
[ 6810.464136] floppy0: floppy timeout called
[ 6810.464142] end_request: I/O error, dev fd0, sector 0
[ 6810.464150] Buffer I/O error on device fd0, logical block 0
[ 6811.052018] ..
[ 6813.472007] 
[ 6813.472012] floppy driver state
[ 6813.472015] -------------------
[ 6813.472044] now=1628368 last interrupt=1627616 diff=752 last called handler=recal_interrupt
[ 6813.472047] timeout_message=floppy start
[ 6813.472049] last output bytes:
[ 6813.472052]  0 90 1627616
[ 6813.472054] 13 90 1627616
[ 6813.472057]  0 90 1627616
[ 6813.472059] 1a 90 1627616
[ 6813.472061]  0 90 1627616
[ 6813.472064]  3 90 1627616
[ 6813.472066] c1 90 1627616
[ 6813.472068] 10 90 1627616
[ 6813.472070]  7 80 1627616
[ 6813.472073]  0 90 1627616
[ 6813.472075]  8 81 1627616
[ 6813.472077] e6 80 1627616
[ 6813.472079]  0 90 1627616
[ 6813.472082]  0 90 1627616
[ 6813.472084]  0 90 1627616
[ 6813.472086]  1 90 1627616
[ 6813.472088]  2 90 1627616
[ 6813.472091] 12 90 1627616
[ 6813.472093] 1b 90 1627616
[ 6813.472095] ff 90 1627616
[ 6813.472097] last result at 1627616
[ 6813.472099] last redo_fd_request at 1627616
[ 6813.472104] 20 00                                             .
[ 6813.472112] status=50
[ 6813.472114] fdc_busy=1
[ 6813.472119] do_floppy=main_command_interrupt
[ 6813.472125] fd_timer.function=fd_watchdog
[ 6813.472128] cont=f8434080
[ 6813.472130] current_req=f4db8230
[ 6813.472132] command_status=-1
[ 6813.472134] 
[ 6813.472137] floppy0: floppy timeout called
[ 6813.472144] end_request: I/O error, dev fd0, sector 0
[ 6813.472152] Buffer I/O error on device fd0, logical block 0
[ 6813.520030] ...
[ 6816.480007] 
[ 6816.480012] floppy driver state
[ 6816.480015] -------------------
[ 6816.480043] now=1629120 last interrupt=1628368 diff=752 last called handler=recal_interrupt
[ 6816.480047] timeout_message=floppy start
[ 6816.480049] last output bytes:
[ 6816.480052]  0 90 1628368
[ 6816.480055] 13 90 1628368
[ 6816.480057]  0 90 1628368
[ 6816.480059] 1a 90 1628368
[ 6816.480061]  0 90 1628368
[ 6816.480064]  3 90 1628368
[ 6816.480066] c1 90 1628368
[ 6816.480068] 10 90 1628368
[ 6816.480070]  7 80 1628368
[ 6816.480073]  0 90 1628368
[ 6816.480075]  8 81 1628368
[ 6816.480077] e6 80 1628368
[ 6816.480080]  0 90 1628368
[ 6816.480082]  0 90 1628368
[ 6816.480084]  0 90 1628368
[ 6816.480086]  1 90 1628368
[ 6816.480089]  2 90 1628368
[ 6816.480091] 12 90 1628368
[ 6816.480093] 1b 90 1628368
[ 6816.480095] ff 90 1628368
[ 6816.480097] last result at 1628368
[ 6816.480100] last redo_fd_request at 1628368
[ 6816.480104] 20 00                                             .
[ 6816.480112] status=50
[ 6816.480114] fdc_busy=1
[ 6816.480120] do_floppy=main_command_interrupt
[ 6816.480126] fd_timer.function=fd_watchdog
[ 6816.480128] cont=f8434080
[ 6816.480130] current_req=f4db8230
[ 6816.480132] command_status=-1
[ 6816.480134] 
[ 6816.480138] floppy0: floppy timeout called
[ 6816.480145] end_request: I/O error, dev fd0, sector 0
[ 6816.480152] Buffer I/O error on device fd0, logical block 0
[ 6817.220016] ..
[ 6819.488007] 
[ 6819.488012] floppy driver state
[ 6819.488014] -------------------
[ 6819.488043] now=1629872 last interrupt=1629120 diff=752 last called handler=recal_interrupt
[ 6819.488047] timeout_message=floppy start
[ 6819.488049] last output bytes:
[ 6819.488052]  0 90 1629120
[ 6819.488054] 13 90 1629120
[ 6819.488056]  0 90 1629120
[ 6819.488059] 1a 90 1629120
[ 6819.488061]  0 90 1629120
[ 6819.488063]  3 90 1629120
[ 6819.488065] c1 90 1629120
[ 6819.488068] 10 90 1629120
[ 6819.488070]  7 80 1629120
[ 6819.488072]  0 90 1629120
[ 6819.488074]  8 81 1629120
[ 6819.488077] e6 80 1629120
[ 6819.488079]  0 90 1629120
[ 6819.488081]  0 90 1629120
[ 6819.488083]  0 90 1629120
[ 6819.488086]  1 90 1629120
[ 6819.488088]  2 90 1629120
[ 6819.488090] 12 90 1629120
[ 6819.488093] 1b 90 1629120
[ 6819.488095] ff 90 1629120
[ 6819.488097] last result at 1629120
[ 6819.488099] last redo_fd_request at 1629120
[ 6819.488103] 20 00                                             .
[ 6819.488112] status=50
[ 6819.488114] fdc_busy=1
[ 6819.488119] do_floppy=main_command_interrupt
[ 6819.488125] fd_timer.function=fd_watchdog
[ 6819.488128] cont=f8434080
[ 6819.488130] current_req=f4db8230
[ 6819.488132] command_status=-1
[ 6819.488134] 
[ 6819.488137] floppy0: floppy timeout called
[ 6819.488144] end_request: I/O error, dev fd0, sector 0
[ 6819.488152] Buffer I/O error on device fd0, logical block 0
[ 6819.688022] ...
[ 6822.496007] 
[ 6822.496012] floppy driver state
[ 6822.496014] -------------------
[ 6822.496043] now=1630624 last interrupt=1629872 diff=752 last called handler=recal_interrupt
[ 6822.496046] timeout_message=floppy start
[ 6822.496049] last output bytes:
[ 6822.496051]  0 90 1629872
[ 6822.496054] 13 90 1629872
[ 6822.496056]  0 90 1629872
[ 6822.496058] 1a 90 1629872
[ 6822.496060]  0 90 1629872
[ 6822.496063]  3 90 1629872
[ 6822.496065] c1 90 1629872
[ 6822.496067] 10 90 1629872
[ 6822.496069]  7 80 1629872
[ 6822.496071]  0 90 1629872
[ 6822.496074]  8 81 1629872
[ 6822.496076] e6 80 1629872
[ 6822.496078]  0 90 1629872
[ 6822.496080]  0 90 1629872
[ 6822.496083]  0 90 1629872
[ 6822.496085]  1 90 1629872
[ 6822.496087]  2 90 1629872
[ 6822.496089] 12 90 1629872
[ 6822.496091] 1b 90 1629872
[ 6822.496094] ff 90 1629872
[ 6822.496096] last result at 1629872
[ 6822.496098] last redo_fd_request at 1629872
[ 6822.496102] 20 00                                             .
[ 6822.496110] status=50
[ 6822.496112] fdc_busy=1
[ 6822.496118] do_floppy=main_command_interrupt
[ 6822.496123] fd_timer.function=fd_watchdog
[ 6822.496126] cont=f8434080
[ 6822.496128] current_req=f4db8230
[ 6822.496130] command_status=-1
[ 6822.496132] 
[ 6822.496135] floppy0: floppy timeout called
[ 6822.496142] end_request: I/O error, dev fd0, sector 0
[ 6822.496149] Buffer I/O error on device fd0, logical block 0
[ 6823.392013] ..
[ 6825.504007] 
[ 6825.504012] floppy driver state
[ 6825.504014] -------------------
[ 6825.504044] now=1631376 last interrupt=1630624 diff=752 last called handler=recal_interrupt
[ 6825.504047] timeout_message=floppy start
[ 6825.504049] last output bytes:
[ 6825.504052]  0 90 1630624
[ 6825.504054] 13 90 1630624
[ 6825.504057]  0 90 1630624
[ 6825.504059] 1a 90 1630624
[ 6825.504061]  0 90 1630624
[ 6825.504063]  3 90 1630624
[ 6825.504066] c1 90 1630624
[ 6825.504068] 10 90 1630624
[ 6825.504070]  7 80 1630624
[ 6825.504072]  0 90 1630624
[ 6825.504074]  8 81 1630624
[ 6825.504077] e6 80 1630624
[ 6825.504079]  0 90 1630624
[ 6825.504081]  0 90 1630624
[ 6825.504083]  0 90 1630624
[ 6825.504085]  1 90 1630624
[ 6825.504088]  2 90 1630624
[ 6825.504090] 12 90 1630624
[ 6825.504092] 1b 90 1630624
[ 6825.504094] ff 90 1630624
[ 6825.504096] last result at 1630624
[ 6825.504099] last redo_fd_request at 1630624
[ 6825.504103] 20 00                                             .
[ 6825.504111] status=50
[ 6825.504113] fdc_busy=1
[ 6825.504118] do_floppy=main_command_interrupt
[ 6825.504124] fd_timer.function=fd_watchdog
[ 6825.504127] cont=f8434080
[ 6825.504129] current_req=f4db8230
[ 6825.504131] command_status=-1
[ 6825.504133] 
[ 6825.504136] floppy0: floppy timeout called
[ 6825.504143] end_request: I/O error, dev fd0, sector 0
[ 6825.504150] Buffer I/O error on device fd0, logical block 0
[ 6825.856012] ...
[ 6828.512007] 
[ 6828.512012] floppy driver state
[ 6828.512014] -------------------
[ 6828.512043] now=1632128 last interrupt=1631376 diff=752 last called handler=recal_interrupt
[ 6828.512046] timeout_message=floppy start
[ 6828.512048] last output bytes:
[ 6828.512051]  0 90 1631376
[ 6828.512054] 13 90 1631376
[ 6828.512056]  0 90 1631376
[ 6828.512058] 1a 90 1631376
[ 6828.512060]  0 90 1631376
[ 6828.512062]  3 90 1631376
[ 6828.512065] c1 90 1631376
[ 6828.512067] 10 90 1631376
[ 6828.512069]  7 80 1631376
[ 6828.512071]  0 90 1631376
[ 6828.512073]  8 81 1631376
[ 6828.512076] e6 80 1631376
[ 6828.512078]  0 90 1631376
[ 6828.512080]  0 90 1631376
[ 6828.512082]  0 90 1631376
[ 6828.512084]  1 90 1631376
[ 6828.512087]  2 90 1631376
[ 6828.512089] 12 90 1631376
[ 6828.512091] 1b 90 1631376
[ 6828.512093] ff 90 1631376
[ 6828.512095] last result at 1631376
[ 6828.512097] last redo_fd_request at 1631376
[ 6828.512101] 20 00                                             .
[ 6828.512110] status=50
[ 6828.512112] fdc_busy=1
[ 6828.512117] do_floppy=main_command_interrupt
[ 6828.512123] fd_timer.function=fd_watchdog
[ 6828.512125] cont=f8434080
[ 6828.512127] current_req=f4db8230
[ 6828.512129] command_status=-1
[ 6828.512131] 
[ 6828.512135] floppy0: floppy timeout called
[ 6828.512141] end_request: I/O error, dev fd0, sector 0
[ 6828.512149] Buffer I/O error on device fd0, logical block 0
[ 6829.560012] ..
[ 6831.520007] 
[ 6831.520013] floppy driver state
[ 6831.520015] -------------------
[ 6831.520044] now=1632880 last interrupt=1632128 diff=752 last called handler=recal_interrupt
[ 6831.520048] timeout_message=floppy start
[ 6831.520050] last output bytes:
[ 6831.520052]  0 90 1632128
[ 6831.520055] 13 90 1632128
[ 6831.520057]  0 90 1632128
[ 6831.520060] 1a 90 1632128
[ 6831.520062]  0 90 1632128
[ 6831.520064]  3 90 1632128
[ 6831.520066] c1 90 1632128
[ 6831.520069] 10 90 1632128
[ 6831.520071]  7 80 1632128
[ 6831.520073]  0 90 1632128
[ 6831.520075]  8 81 1632128
[ 6831.520078] e6 80 1632128
[ 6831.520080]  0 90 1632128
[ 6831.520082]  0 90 1632128
[ 6831.520084]  0 90 1632128
[ 6831.520087]  1 90 1632128
[ 6831.520089]  2 90 1632128
[ 6831.520091] 12 90 1632128
[ 6831.520093] 1b 90 1632128
[ 6831.520096] ff 90 1632128
[ 6831.520098] last result at 1632128
[ 6831.520100] last redo_fd_request at 1632128
[ 6831.520104] 20 00                                             .
[ 6831.520113] status=50
[ 6831.520115] fdc_busy=1
[ 6831.520120] do_floppy=main_command_interrupt
[ 6831.520126] fd_timer.function=fd_watchdog
[ 6831.520129] cont=f8434080
[ 6831.520131] current_req=f4db8230
[ 6831.520133] command_status=-1
[ 6831.520135] 
[ 6831.520139] floppy0: floppy timeout called
[ 6831.520145] end_request: I/O error, dev fd0, sector 0
[ 6831.520153] Buffer I/O error on device fd0, logical block 0
[ 6832.028013] ...................not responding...
[ 6875.444539] sd 6:0:0:0: [sdc] READ CAPACITY failed
[ 6875.444546] sd 6:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 6875.444551] sd 6:0:0:0: [sdc]  Sense Key : Not Ready [current] 
[ 6875.444556] sd 6:0:0:0: [sdc]  Add. Sense: Logical unit is in process of becoming ready
[ 6882.437639] sd 6:0:0:0: [sdc] Test WP failed, assume Write Enabled
[ 6889.430227] sd 6:0:0:0: [sdc] Asking for cache data failed
[ 6889.430234] sd 6:0:0:0: [sdc] Assuming drive cache: write through
[ 6889.430240] sd 6:0:0:0: [sdc] Attached SCSI disk
[ 7079.655119] usb 1-6: USB disconnect, device number 4
[10244.200072] usb 1-6: new high-speed USB device number 5 using ehci_hcd
[10244.334855] usb 1-6: New USB device found, idVendor=0930, idProduct=6544
[10244.334860] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[10244.334864] usb 1-6: Product: DataTraveler G2 
[10244.334867] usb 1-6: Manufacturer: Kingston
[10244.334870] usb 1-6: SerialNumber: 001D92DC4AE3C99113710B89
[10244.342940] scsi7 : usb-storage 1-6:1.0
[10245.340673] scsi 7:0:0:0: Direct-Access     Kingston DataTraveler G2  1.00 PQ: 0 ANSI: 2
[10245.348729] sd 7:0:0:0: Attached scsi generic sg3 type 0
[10245.349777] sd 7:0:0:0: [sdc] 15654848 512-byte logical blocks: (8.01 GB/7.46 GiB)
[10245.350264] sd 7:0:0:0: [sdc] Write Protect is off
[10245.350270] sd 7:0:0:0: [sdc] Mode Sense: 65 44 09 30
[10245.350765] sd 7:0:0:0: [sdc] No Caching mode page found
[10245.350771] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[10245.354267] sd 7:0:0:0: [sdc] No Caching mode page found
[10245.354275] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[10245.355057]  sdc: sdc1
[10245.359640] sd 7:0:0:0: [sdc] No Caching mode page found
[10245.359647] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[10245.359652] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[10264.965337] FAT-fs (sdc1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[10368.125598] sdc: detected capacity change from 8015282176 to 0
[10370.647644] usb 1-6: USB disconnect, device number 5
[10470.016028] ------------[ cut here ]------------
[10470.016041] WARNING: at /build/linux-V87crB/linux-3.2.68/net/sched/sch_generic.c:256 dev_watchdog+0xb6/0x109()
[10470.016045] Hardware name: A7N8X-E
[10470.016048] NETDEV WATCHDOG: eth0 (skge): transmit queue 0 timed out
[10470.016051] Modules linked in: nls_utf8 nls_cp437 vfat fat usb_storage ppdev lp bnep rfcomm bluetooth rfkill nfsd nfs nfs_acl auth_rpcgss fscache lockd sunrpc loop snd_emu10k1_synth snd_emux_synth snd_seq_midi_emul snd_seq_virmidi snd_wavefront snd_emu10k1 snd_cs4236 nouveau snd_opl3_lib snd_wss_lib mxm_wmi snd_ac97_codec wmi snd_mpu401 snd_mpu401_uart video ttm drm_kms_helper snd_util_mem snd_seq_midi snd_hwdep snd_seq_midi_event drm snd_pcm snd_rawmidi snd_page_alloc ac97_bus snd_seq snd_seq_device snd_timer snd emu10k1_gp power_supply i2c_algo_bit psmouse ns558 evdev shpchp gameport soundcore i2c_nforce2 i2c_core pcspkr serio_raw processor parport_pc parport thermal_sys button ext4 crc16 jbd2 mbcache sg sr_mod sd_mod crc_t10dif cdrom ata_generic sata_sil pata_amd libata ohci_hcd scsi_mod ehci_hcd floppy firewire_ohci usbcore 8139too 8139cp mii skge firewire_core crc_itu_t usb_common [last unloaded: scsi_wait_scan]
[10470.016140] Pid: 3375, comm: htop Not tainted 3.2.0-4-686-pae #1 Debian 3.2.68-1+deb7u2
[10470.016143] Call Trace:
[10470.016154]  [<c10387c4>] ? warn_slowpath_common+0x68/0x79
[10470.016159]  [<c12352a7>] ? dev_watchdog+0xb6/0x109
[10470.016164]  [<c103883d>] ? warn_slowpath_fmt+0x29/0x2d
[10470.016169]  [<c12352a7>] ? dev_watchdog+0xb6/0x109
[10470.016181]  [<c103d26f>] ? local_bh_enable+0x2/0x2
[10470.016186]  [<c1042500>] ? run_timer_softirq+0x150/0x1f3
[10470.016191]  [<c12351f1>] ? netif_tx_unlock+0x38/0x38
[10470.016196]  [<c103d26f>] ? local_bh_enable+0x2/0x2
[10470.016200]  [<c103d303>] ? __do_softirq+0x94/0x12f
[10470.016204]  [<c103d26f>] ? local_bh_enable+0x2/0x2
[10470.016207]  <IRQ>  [<c103d4f4>] ? irq_exit+0x32/0x80
[10470.016217]  [<c101e6b9>] ? smp_apic_timer_interrupt+0x5b/0x65
[10470.016226]  [<c12c63ad>] ? apic_timer_interrupt+0x31/0x38
[10470.016229] ---[ end trace f4d9320bc612afef ]---
[13735.624100] usb 1-6: new high-speed USB device number 6 using ehci_hcd
[13736.121906] usb 1-6: New USB device found, idVendor=174c, idProduct=55aa
[13736.121912] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[13736.121916] usb 1-6: Product: MS
[13736.121919] usb 1-6: Manufacturer:  
[13736.121922] usb 1-6: SerialNumber: 12345678942B
[13736.123493] scsi8 : usb-storage 1-6:1.0
[13737.337583] scsi 8:0:0:0: Direct-Access              MS               0    PQ: 0 ANSI: 6
[13737.340384] sd 8:0:0:0: Attached scsi generic sg3 type 0
[13737.344482] sd 8:0:0:0: [sdc] Spinning up disk.....................................................................................not responding...
[13859.612328] sd 8:0:0:0: [sdc] READ CAPACITY failed
[13859.612335] sd 8:0:0:0: [sdc]  Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[13859.612340] sd 8:0:0:0: [sdc]  Sense Key : Not Ready [current] 
[13859.612345] sd 8:0:0:0: [sdc]  Add. Sense: Logical unit is in process of becoming ready
[13866.609668] sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
[13873.609065] sd 8:0:0:0: [sdc] Asking for cache data failed
[13873.609072] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[13873.618251] sd 8:0:0:0: [sdc] Spinning up disk................................................................................not responding...
root@debian:/home/angel#

et kern.log > angelik.altervista.org/angelique/kern

je pense avoir vu un truc :

Jun 23 12:43:28 debian kernel: [13735.624100] usb 1-6: new high-speed USB device number 6 using ehci_hcd
Jun 23 12:43:28 debian kernel: [13736.121906] usb 1-6: New USB device found, idVendor=174c, idProduct=55aa
Jun 23 12:43:28 debian kernel: [13736.121912] usb 1-6: New USB device strings: Mfr=2, Product=3, SerialNumber=1
Jun 23 12:43:28 debian kernel: [13736.121916] usb 1-6: Product: MS
Jun 23 12:43:28 debian kernel: [13736.121919] usb 1-6: Manufacturer:
Jun 23 12:43:28 debian kernel: [13736.121922] usb 1-6: SerialNumber: 12345678942B
Jun 23 12:43:28 debian kernel: [13736.123493] scsi8 : usb-storage 1-6:1.0
Jun 23 12:43:29 debian kernel: [13737.337583] scsi 8:0:0:0: Direct-Access MS 0 PQ: 0 ANSI: 6
Jun 23 12:43:29 debian kernel: [13737.340384] sd 8:0:0:0: Attached scsi generic sg3 type 0
Jun 23 12:45:11 debian kernel: [13737.344482] sd 8:0:0:0: [sdc] Spinning up disk…not responding…
Jun 23 12:45:32 debian kernel: [13859.612328] sd 8:0:0:0: [sdc] READ CAPACITY failed
Jun 23 12:45:32 debian kernel: [13859.612335] sd 8:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
Jun 23 12:45:32 debian kernel: [13859.612340] sd 8:0:0:0: [sdc] Sense Key : Not Ready [current]
Jun 23 12:45:32 debian kernel: [13859.612345] sd 8:0:0:0: [sdc] Add. Sense: Logical unit is in process of becoming ready
Jun 23 12:45:39 debian kernel: [13866.609668] sd 8:0:0:0: [sdc] Test WP failed, assume Write Enabled
Jun 23 12:45:46 debian kernel: [13873.609065] sd 8:0:0:0: [sdc] Asking for cache data failed
Jun 23 12:45:46 debian kernel: [13873.609072] sd 8:0:0:0: [sdc] Assuming drive cache: write through
Jun 23 12:47:26 debian kernel: [13873.618251] sd 8:0:0:0: [sdc] Spinning up disk…not responding…
Jun 23 12:47:48 debian kernel: [13995.462306] sd 8:0:0:0: [sdc] READ CAPACITY failed

Mon matos ancien ne lit pas les disks de trop grande capacité ??? READ CAPACITY failed

#16

Excuse-moi pour la commande lsusb, cela aurait été plus simple de te demander :

La ligne suivante [ 6612.368085] sd 5:0:0:0: [sdc] READ CAPACITY failed que nous retrouvons dans dmessg, et fort logiquement dans le journal du noyau, semble indiquer une défaillance matérielle de la clé … j’ai déjà vu du matériel correctement - encore pendant un laps de temps - supporté sous Windows, et qui montrait ses défaillances sous Linux.

Bien que nous nous doutons du non-support matériel du disque en question - au fait, il est censé être de quelle taille ? -, le test de montage suivant devrait démontrer sa défaillance, toujours avec les droits admin :

Histoire d’éliminer une très proche défaillance matérielle de ta carte mère, du proc ou de la RAM - plusieurs petits détails qui me font pencher en ce sens :

  • problème de lecture usb
  • problème de lecture du périphérique lecteur de disquette
  • le “Call Trace” suivant :

[quote][10470.016143] Call Trace:
[10470.016154] [] ? warn_slowpath_common+0x68/0x79
[10470.016159] [] ? dev_watchdog+0xb6/0x109
[10470.016164] [] ? warn_slowpath_fmt+0x29/0x2d
[10470.016169] [] ? dev_watchdog+0xb6/0x109
[10470.016181] [] ? local_bh_enable+0x2/0x2
[10470.016186] [] ? run_timer_softirq+0x150/0x1f3
[10470.016191] [] ? netif_tx_unlock+0x38/0x38
[10470.016196] [] ? local_bh_enable+0x2/0x2
[10470.016200] [] ? __do_softirq+0x94/0x12f
[10470.016204] [] ? local_bh_enable+0x2/0x2
[10470.016207] [] ? irq_exit+0x32/0x80
[10470.016217] [] ? smp_apic_timer_interrupt+0x5b/0x65
[10470.016226] [] ? apic_timer_interrupt+0x31/0x38
[10470.016229] —[ end trace f4d9320bc612afef ]—[/quote]

Pour tester assurément la RAM, voire le CPU, tu as de bons outils, de stresscpu, et memtest … sur tout bon livecd, tel que SystemRescueCD ou UltimateBootCD :wink:

#17

Le disk usb est neuf ^^ , ça me le fait avec un autre disk dur usb aussi de meme capacité, hormis ceux là tous le reste usb , clefs, dashcam, tel fonctionnent tres bien.

c’est un 500Go Volume 2 E Tx NTFS Partition 466 GB Sain

RAM ok , CPU OK

Je pense pas que le materiel ne gere pas le disk car en bootant sur un PE Livecd ce usb est géré, par contre avec pmagic 5.5 non et ma debian non plus !!!

La commande mount parrait pas bonne :slightly_smiling:

root@debian:/home/angel# lsusb -D /dev/bus/usb/001/006
Cannot open /dev/bus/usb/001/006
root@debian:/home/angel# mount -t ntfs /dev/sdc
Utilisation : mount -V : afficher la version
mount -h : afficher cette aide
mount : afficher la liste des systèmes de fichiers montés
mount -l : idem, incluant les étiquettes de volumes
Cela pour la partie informative. Suit ce qui porte sur le montage.
La commande est « mount [-t type-sys-fichier] quoi où ».
Les détails se trouvant dans /etc/fstab peuvent être omis.
mount -a [-t|-O] … : monter tout ce qui est listé dans /etc/fstab
mount périphérique : monter le périphérique à l’endroit connu
mount répertoire : monter le périphérique connu ici
mount -t type périph rép : commande de montage ordinaire
Noter qu’on ne monte pas réellement un périphérique, on monte
un système de fichiers (d’un type donné) trouvé sur le périphérique.
On peut aussi monter une arborescence de rép. déjà visible ailleurs :
mount --bind ancien-rép nouveau-rép
ou déplacer une sous-arborescence :
mount --move ancien-rép nouveau-rép
On peut changer le type de montage d’un rép. :
mount --make-shared rép.
mount --make-slave rép.
mount --make-private rép.
mount --make-unbindable rép.
On peut changer le type de tous les points de montage d’une
sous-arborescence contenue dans le rép.:
mount --make-rshared rép.
mount --make-rslave rép.
mount --make-rprivate rép.
mount --make-runbindable rép.
Un périphérique peut être nommé, comme /dev/hda1 ou /dev/cdrom, ou
repéré par l’étiquette, avec -L étiqu. ou par UUID, avec -U uuid .
Autres options : [-nfFrsvw] [-o options] [-p descr_fic_mots_passe].
Pour plus de précisions, consultez « man 8 mount ».

#18

Tu testes ton disque dur avec un WinPE et ça fonctionne sur la même machine ?
Et, pas sous Debian ?

Deux idées, en passant :

  • upgrader ta wheezy en jessie - pour avoir un OS plus récent, et surtout un kernel très récent, donc une meilleure gestion USB de ton périphérique -
  • upgrader le bios (asus.com/fr/supportonly/A7N … _Download/) - bien qu’apparement, il ne semble pas y avoir de problèmes de ce côté-là !
#19

bon alors ça se confirme, effectivement non le pe windows c’etait sur une autre machine.

Je viens de tester sur cette machine a7n8x-e deluxe et effectivement pas vu non plus le disk usb.

le controlleur sil 3112 ne voit pas les disk sata de 500Go ou + , y’aurait une maj bios d’apres ce que j’ai lu sur google.

Donc c’est ma carte mere qui gere pas la capacité du disk :wink:

Merci de votre soutient \o

#20

Qu’est-ce qu’un contrôleur SATA a à voir avec un disque USB ?
Je doute aussi que le contrôleur USB ou le BIOS de la carte mère aient quelque rôle que ce soit dans la reconnaissance des caractéristiques d’un périphérique de stockage USB. Cela relève de la couche logicielle usb-storage, au-dessus de la gestion basique de l’USB. Ce serait comme considérer qu’un switch ethernet ne supporte pas une certaine taille de transfert de fichier en FTP ou HTTP.

J’observe dans les logs du noyau que c’est quand le disque est mis en rotation (“Spinning up disk”) et donc consomme plus que ça part en sucette. Ce disque est alimenté uniquement par le port USB ou par sa propre alimentation ? Dans le premier cas, il n’y aurait pas un problème d’alimentation insuffisante ?