Pas d'interface graphique

Support Debian
#1

Bonjour à tous !

Aujourd’hui j’ai récupéré un ordinateur de bureau.
J’ai voulu y installer debian wheezy.
Cela a l’air de bien marcher.
Cependant, je n’ai pas d’interface graphique …
c’est un peu tristounet …

Un petit coup de main serai bienvenu ^^

Voici quelques commandes qui sont apparemment utile à la compréhension du problème:

[code]#uname -r

3.2.0-4-amd64[/code]

[code]#lspci

00:00.0 Host bridge: Advanced Micro Devices [AMD] nee ATI RS690 Host Bridge
00:02.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (PCI Express Graphics Port 0)
00:07.0 PCI bridge: Advanced Micro Devices [AMD] nee ATI RS690 PCI to PCI Bridge (PCI Express Port 3)
00:12.0 SATA controller: Advanced Micro Devices [AMD] nee ATI SB600 Non-Raid-5 SATA
00:13.0 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI0)
00:13.1 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI1)
00:13.2 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI2)
00:13.3 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI3)
00:13.4 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB (OHCI4)
00:13.5 USB controller: Advanced Micro Devices [AMD] nee ATI SB600 USB Controller (EHCI)
00:14.0 SMBus: Advanced Micro Devices [AMD] nee ATI SBx00 SMBus Controller (rev 14)
00:14.1 IDE interface: Advanced Micro Devices [AMD] nee ATI SB600 IDE
00:14.2 Audio device: Advanced Micro Devices [AMD] nee ATI SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] nee ATI SB600 PCI to LPC Bridge
00:14.4 PCI bridge: Advanced Micro Devices [AMD] nee ATI SBx00 PCI to PCI Bridge
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 10h Processor Link Control
01:00.0 VGA compatible controller: NVIDIA Corporation G84 [GeForce 8600 GS] (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
03:08.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0)[/code]

[code]#lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 07b8:e004 AboCom Systems Inc Mass Storage Device
Bus 002 Device 002: ID 04ca:0050 Lite-On Technology Corp.
Bus 002 Device 009: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 001 Device 006: ID 0204:1976 Chipsbank Microelectronics Co., Ltd [/code]

[code]#dmidecode

dmidecode 2.11

SMBIOS 2.5 present.
51 structures occupying 2263 bytes.
Table at 0x000F0000.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Phoenix Technologies, LTD
Version: V5.05
Release Date: 12/31/2007
Address: 0xE0000
Runtime Size: 128 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/360 kB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
AGP is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Targeted content distribution is supported

Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: FUJITSU SIEMENS
Product Name: AMD690VM-FMH
Version: Unknow
Serial Number: YSHS025664
UUID: 00020003-0004-0005-0006-000700080009
Wake-up Type: Power Switch
SKU Number:
Family:

Handle 0x0002, DMI type 2, 8 bytes
Base Board Information
Manufacturer: FUJITSU SIEMENS
Product Name: AMD690VM-FMH
Version: Unknow
Serial Number:

Handle 0x0003, DMI type 3, 17 bytes
Chassis Information
Manufacturer: AMD
Type: Desktop
Lock: Not Present
Version: RS690
Serial Number: YSHS025664
Asset Tag:
Boot-up State: Unknown
Power Supply State: Unknown
Thermal State: Unknown
Security Status: Unknown
OEM Information: 0x00000000

Handle 0x0004, DMI type 4, 40 bytes
Processor Information
Socket Designation: Socket AM2
Type: Central Processor
Family: Pentium Pro
Manufacturer: AMD
ID: 22 0F 10 00 FF FB 8B 17
Signature: Type 0, Family 16, Model 2, Stepping 2
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
HTT (Multi-threading)
Version: AMD Phenom™ 9500 Quad-Core Processor
Voltage: 1.5 V
External Clock: 233 MHz
Max Speed: 3000 MHz
Current Speed: 1050 MHz
Status: Populated, Enabled
Upgrade: Socket 940
L1 Cache Handle: 0x000A
L2 Cache Handle: 0x000B
L3 Cache Handle: Not Provided
Serial Number:
Asset Tag:
Part Number:
Core Count: 2
Core Enabled: 2
Thread Count: 2
Characteristics:
64-bit capable

Handle 0x0005, DMI type 5, 24 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 4096 MB
Maximum Total Memory Size: 16384 MB
Supported Speeds:
70 ns
60 ns
50 ns
Supported Memory Types:
Standard
DIMM
Memory Module Voltage: 2.9 V
Associated Memory Slots: 4
0x0006
0x0007
0x0008
0x0009
Enabled Error Correcting Capabilities: None

Handle 0x0006, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A0
Bank Connections: 0
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 1024 MB (Single-bank Connection)
Enabled Size: 1024 MB (Single-bank Connection)
Error Status: OK

Handle 0x0007, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A1
Bank Connections: 2
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 1024 MB (Single-bank Connection)
Enabled Size: 1024 MB (Single-bank Connection)
Error Status: OK

Handle 0x0008, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A2
Bank Connections: 4
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 512 MB (Single-bank Connection)
Enabled Size: 512 MB (Single-bank Connection)
Error Status: OK

Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: A3
Bank Connections: 6
Current Speed: Unknown
Type: Other Unknown EDO
Installed Size: 512 MB (Single-bank Connection)
Enabled Size: 512 MB (Single-bank Connection)
Error Status: OK

Handle 0x000A, DMI type 7, 19 bytes
Cache Information
Socket Designation: Internal Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 kB
Maximum Size: 128 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown

Handle 0x000B, DMI type 7, 19 bytes
Cache Information
Socket Designation: External Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 512 kB
Maximum Size: 512 kB
Supported SRAM Types:
Synchronous
Installed SRAM Type: Synchronous
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PRIMARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: SECONDARY IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: FDD
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: 8251 FIFO Compatible

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM1
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: COM2
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator:
External Connector Type: DB-9 male
Port Type: Serial Port 16450 Compatible

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: LPT1
Internal Connector Type: DB-25 female
External Reference Designator:
External Connector Type: DB-25 female
Port Type: Parallel Port ECP/EPP

Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Keyboard
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Keyboard Port

Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: PS/2 Mouse
Internal Connector Type: PS/2
External Reference Designator:
External Connector Type: PS/2
Port Type: Mouse Port

Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB0
External Connector Type: Other
Port Type: USB

Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Other
Port Type: USB

Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Other
Port Type: USB

Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB3
External Connector Type: Other
Port Type: USB

Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB4
External Connector Type: Other
Port Type: USB

Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB5
External Connector Type: Other
Port Type: USB

Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB6
External Connector Type: Other
Port Type: USB

Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB7
External Connector Type: Other
Port Type: USB

Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB8
External Connector Type: Other
Port Type: USB

Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: USB9
External Connector Type: Other
Port Type: USB

Handle 0x001E, DMI type 9, 13 bytes
System Slot Information
Designation: PCI0
Type: 32-bit PCI Express
Current Usage: In Use
Length: Long
ID: 1
Characteristics:
5.0 V is provided
PME signal is supported

Handle 0x001F, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 2
Characteristics:
5.0 V is provided
PME signal is supported

Handle 0x0020, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: Available
Length: Long
ID: 3
Characteristics:
5.0 V is provided
PME signal is supported

Handle 0x0021, DMI type 9, 13 bytes
System Slot Information
Designation: AGP
Type: 32-bit AGP
Current Usage: Available
Length: Long
ID: 8
Characteristics:
5.0 V is provided

Handle 0x0022, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Long
Installable Languages: 3
n|US|iso8859-1
n|US|iso8859-1
r|CA|iso8859-1
Currently Installed Language: n|US|iso8859-1

Handle 0x0023, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 2 GB
Error Information Handle: Not Provided
Number Of Devices: 4

Handle 0x0024, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0023
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A0
Bank Locator: Bank0/1
Type: DDR2
Type Detail: None
Speed: 1639 MHz
Manufacturer:
Serial Number: Not Specified
Asset Tag: None
Part Number: None

Handle 0x0025, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0023
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 1024 MB
Form Factor: DIMM
Set: None
Locator: A1
Bank Locator: Bank2/3
Type: DDR2
Type Detail: None
Speed: 1639 MHz
Manufacturer:
Serial Number: Not Specified
Asset Tag: None
Part Number: None

Handle 0x0026, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0023
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: A2
Bank Locator: Bank4/5
Type: DDR2
Type Detail: None
Speed: 1639 MHz
Manufacturer:
Serial Number: Not Specified
Asset Tag: None
Part Number: None

Handle 0x0027, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0023
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: A3
Bank Locator: Bank6/7
Type: DDR2
Type Detail: None
Speed: 1639 MHz
Manufacturer:
Serial Number: Not Specified
Asset Tag: None
Part Number: None

Handle 0x0028, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000BFFFFFFF
Range Size: 3 GB
Physical Array Handle: 0x0023
Partition Width: 1

Handle 0x0029, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0003FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0024
Memory Array Mapped Address Handle: 0x0028
Partition Row Position: 1

Handle 0x002A, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0007FFFFFFF
Range Size: 1 GB
Physical Device Handle: 0x0025
Memory Array Mapped Address Handle: 0x0028
Partition Row Position: 1

Handle 0x002B, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00080000000
Ending Address: 0x0009FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x0026
Memory Array Mapped Address Handle: 0x0028
Partition Row Position: 1

Handle 0x002C, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x000A0000000
Ending Address: 0x000BFFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x0027
Memory Array Mapped Address Handle: 0x0028
Partition Row Position: 1

Handle 0x002D, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected

Handle 0x002E, DMI type 188, 212 bytes
OEM-specific Type
Header and Data:
BC D4 2E 00 00 00 00 C0 00 00 00 00 00 00 00 00
00 00 00 00 00 06 16 00 00 00 00 00 08 00 00 00
00 40 40 00 10 08 01 00 0A 00 58 6F 03 00 00 00
00 00 BF 00 00 00 00 00 01 00 00 00 00 00 00 00
02 00 00 00 00 00 00 00 03 00 00 00 00 00 00 00
04 00 00 00 00 00 00 00 05 00 00 00 00 00 00 00
06 00 00 00 00 00 00 00 07 00 00 00 00 00 00 00
01 00 00 00 00 00 00 00 01 00 80 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
E0 3F 78 00 E0 3F 38 00 00 00 00 00 00 00 00 00
05 00 00 10 00 00 00 00 25 00 00 00 00 00 00 00
24 CA 6A 0C 34 03 A2 00 10 08 01 00 00 02 00 00
00 00 00 00 44 00 90 0A 0A 00 58 6F 00 00 00 00
00 00 00 00

Handle 0x002F, DMI type 190, 212 bytes
OEM-specific Type
Header and Data:
BE D4 2F 00 10 05 00 00 00 00 00 00 24 A4 40 04
C0 0F E4 2F 00 00 00 00 00 00 00 00 17 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 02 F4 02 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00

Handle 0x0030, DMI type 192, 244 bytes
OEM-specific Type
Header and Data:
C0 F4 30 00 05 08 00 00 22 13 11 10 20 22 30 00
E7 08 71 0E FA 0C 10 00 22 13 11 10 0F 0E 0F 0E
0F 0E 0F 0E 0F 0E 0F 0E 0F 0F 0F 11 0F 0F 0F 11
0F 0F 0F 11 0F 0F 0F 20 22 30 00 0B 0A 0B 0A 0B
0A 0B 0A 0B 0A 0B 0A 0A 0C 0B 0A 0A 0C 0B 0A 0A
0C 0B 0A 0B 0B 0B A9 24 83 0A FA 0C 10 00 44 00
43 00 3F 00 3F 00 44 00 4B 00 4A 00 46 00 44 00
4B 00 04 00 03 00 1F 00 1F 00 00 00 0B 00 0A 00
06 00 04 00 00 00 3E 00 44 00 41 00 43 00 00 00
43 00 48 00 49 00 4B 00 00 00 1E 00 04 00 01 00
03 00 00 00 03 00 08 00 09 00 0B 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 18 19 18 19 19 17 19 19 18 00 00 00
DF 01 00 00 DC 01 00 00 DC 01 00 00 DC 01 00 00
00 00 00 00

Handle 0x0031, DMI type 194, 244 bytes
OEM-specific Type
Header and Data:
C2 F4 31 00 05 08 00 00 22 13 11 10 20 22 30 00
A9 24 93 0A FA 0C 10 00 22 13 11 10 10 0E 0F 0F
10 0E 0F 0F 10 0E 0F 0F 0F 0F 0F 0F 0F 0F 0F 0F
0F 0F 0F 0F 10 10 10 20 22 30 00 0A 0B 0B 0B 0A
0B 0B 0B 0A 0B 0B 0B 0B 0B 0B 0A 0B 0B 0B 0A 0B
0B 0B 0A 0A 0A 0A AB 30 A3 0A FA 0C 10 00 47 00
4A 00 42 00 42 00 47 00 4B 00 4A 00 47 00 46 00
4B 00 07 00 0A 00 02 00 02 00 00 00 0B 00 0A 00
07 00 06 00 00 00 3D 00 41 00 44 00 49 00 00 00
45 00 47 00 4A 00 4B 00 00 00 1D 00 01 00 04 00
09 00 00 00 05 00 07 00 0A 00 0B 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 19 19 17 17 18 16 19 19 18 00 00 00
FF 00 00 00 DC 01 00 00 DC 01 00 00 DC 01 00 00
00 00 00 00

Handle 0x0032, DMI type 127, 4 bytes
End Of Table[/code]

#2

[code]#dmesg /var/log/xorg.0.log

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.46-1
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=a216cfb0-280c-4359-af1c-029415769679 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
[ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: FUJITSU SIEMENS AMD690VM-FMH/AMD690VM-FMH, BIOS V5.05 12/31/2007
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0xbffe0 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [ffff8800000f3da0] f3da0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff88000009a000] 9a000 size 20480
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bffe0000
[ 0.000000] 0000000000 - 0080000000 page 1G
[ 0.000000] 0080000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bffe0000 page 4k
[ 0.000000] kernel direct mapping tables up to bffe0000 @ 1fffd000-20000000
[ 0.000000] RAMDISK: 36c78000 - 37634000
[ 0.000000] ACPI: RSDP 00000000000f7ca0 00024 (v02 FSC )
[ 0.000000] ACPI: RSDT 00000000bffe3040 0003C (v01 FSC PC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000bffe30c0 00074 (v01 FSC PC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000bffe3180 049C0 (v01 FSC AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bffe0000 00040
[ 0.000000] ACPI: SSDT 00000000bffe7c80 00544 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000bffe8240 00038 (v01 FSC PC 42302E31 AWRD 00000098)
[ 0.000000] ACPI: SLIC 00000000bffe82c0 00176 (v01 FSC PC 42302E31 AWRD 00000001)
[ 0.000000] ACPI: MCFG 00000000bffe8480 0003C (v01 FSC PC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000bffe7b80 00084 (v01 FSC PC 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-00000000bffe0000
[ 0.000000] Initmem setup node 0 0000000000000000-00000000bffe0000
[ 0.000000] NODE_DATA [00000000bffdb000 - 00000000bffdffff]
[ 0.000000] [ffffea0000000000-ffffea00029fffff] PMD -> [ffff8800bc600000-ffff8800beffffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000bffe0
[ 0.000000] On node 0 totalpages: 786287
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3922 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10696 pages used for memmap
[ 0.000000] DMA32 zone: 771608 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:20000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800bfc00000 s82944 r8192 d23552 u524288
[ 0.000000] pcpu-alloc: s82944 r8192 d23552 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 775530
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=a216cfb0-280c-4359-af1c-029415769679 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Checking aperture…
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 7e02000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Memory: 3083200k/3145600k available (3425k kernel code, 452k absent, 61948k reserved, 3314k data, 576k init)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using HPET reference calibration
[ 0.000000] Detected 2199.722 MHz processor.
[ 0.016005] Calibrating delay loop (skipped), value calculated using timer frequency… 4399.44 BogoMIPS (lpj=8798888)
[ 0.016011] pid_max: default: 32768 minimum: 301
[ 0.016083] Security Framework initialized
[ 0.016089] AppArmor: AppArmor disabled by boot time parameter
[ 0.016393] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.021087] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.022178] Mount-cache hash table entries: 256
[ 0.022321] Initializing cgroup subsys cpuacct
[ 0.022326] Initializing cgroup subsys memory
[ 0.022340] Initializing cgroup subsys devices
[ 0.022344] Initializing cgroup subsys freezer
[ 0.022346] Initializing cgroup subsys net_cls
[ 0.022349] Initializing cgroup subsys blkio
[ 0.022357] Initializing cgroup subsys perf_event
[ 0.022390] tseg: 0000000000
[ 0.022410] CPU: Physical Processor ID: 0
[ 0.022412] CPU: Processor Core ID: 0
[ 0.022414] mce: CPU supports 6 MCE banks
[ 0.022425] using AMD E400 aware idle routine
[ 0.022763] ACPI: Core revision 20110623
[ 0.028705] …TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071663] CPU0: AMD Phenom™ 9500 Quad-Core Processor stepping 02
[ 0.072003] Performance Events: AMD PMU driver.
[ 0.072003] … version: 0
[ 0.072003] … bit width: 48
[ 0.072003] … generic registers: 4
[ 0.072003] … value mask: 0000ffffffffffff
[ 0.072003] … max period: 00007fffffffffff
[ 0.072003] … fixed-purpose events: 0
[ 0.072003] … event mask: 000000000000000f
[ 0.072003] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.072003] Booting Node 0, Processors #1
[ 0.072003] smpboot cpu 1: start_ip = 9a000
[ 0.160029] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.160140] #2
[ 0.160142] smpboot cpu 2: start_ip = 9a000
[ 0.252031] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.252139] #3 Ok.
[ 0.252141] smpboot cpu 3: start_ip = 9a000
[ 0.344037] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.344058] Brought up 4 CPUs
[ 0.344061] Total of 4 processors activated (17597.97 BogoMIPS).
[ 0.346621] devtmpfs: initialized
[ 0.350393] PM: Registering ACPI NVS region at bffe0000 (12288 bytes)
[ 0.350393] print_constraints: dummy:
[ 0.350393] NET: Registered protocol family 16
[ 0.350393] node 0 link 0: io port [c000, ffff]
[ 0.350393] TOM: 00000000c0000000 aka 3072M
[ 0.350393] Fam 10h mmconf [mem 0xe0000000-0xe00fffff]
[ 0.350393] node 0 link 0: mmio [a0000, bffff]
[ 0.350393] node 0 link 0: mmio [c0000000, dfffffff]
[ 0.350393] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.350393] node 0 link 0: mmio [e0000000, e03fffff] ==> [e0100000, e03fffff]
[ 0.350393] bus: [00, 03] on node 0 link 0
[ 0.350393] bus: 00 index 0 [io 0x0000-0xffff]
[ 0.350393] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
[ 0.350393] bus: 00 index 2 [mem 0xc0000000-0xdfffffff]
[ 0.350393] bus: 00 index 3 [mem 0xe0400000-0xfcffffffff]
[ 0.350393] bus: 00 index 4 [mem 0xe0100000-0xe03fffff]
[ 0.350393] Extended Config Space enabled on 1 nodes
[ 0.350393] ACPI: bus type pci registered
[ 0.350393] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.350393] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.369984] PCI: Using configuration type 1 for base access
[ 0.370727] bio: create slab at 0
[ 0.370727] ACPI: Added _OSI(Module Device)
[ 0.370727] ACPI: Added _OSI(Processor Device)
[ 0.370727] ACPI: Added _OSI(3.0 SCP Extensions)
[ 0.370727] ACPI: Added OSI(Processor Aggregator Device)
[ 0.370727] ACPI: EC: Look up EC in DSDT
[ 0.377247] ACPI: Interpreter enabled
[ 0.377254] ACPI: (supports S0 S3 S4 S5)
[ 0.377277] ACPI: Using IOAPIC for interrupt routing
[ 0.391089] ACPI: No dock devices found.
[ 0.391091] HEST: Table not found.
[ 0.391096] PCI: Ignoring host bridge windows from ACPI; if necessary, use “pci=use_crs” and report a bug
[ 0.391165] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.391307] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.391310] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.391313] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.391316] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff] (ignored)
[ 0.391319] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xfebfffff] (ignored)
[ 0.391328] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600
[ 0.391359] pci 0000:00:02.0: [1002:7913] type 1 class 0x000604
[ 0.391393] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.391414] pci 0000:00:07.0: [1002:7917] type 1 class 0x000604
[ 0.391446] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.391479] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101
[ 0.391498] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
[ 0.391508] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
[ 0.391519] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
[ 0.391529] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
[ 0.391540] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
[ 0.391550] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
[ 0.391572] pci 0000:00:12.0: set SATA to AHCI mode
[ 0.391612] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
[ 0.391627] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
[ 0.391698] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
[ 0.391712] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
[ 0.391782] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
[ 0.391797] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
[ 0.391867] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
[ 0.391881] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
[ 0.391951] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
[ 0.391966] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
[ 0.392052] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
[ 0.392073] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
[ 0.392162] pci 0000:00:13.5: supports D1 D2
[ 0.392164] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
[ 0.392190] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
[ 0.392214] pci 0000:00:14.0: reg 10: [io 0xfa00-0xfa0f]
[ 0.392303] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
[ 0.392317] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
[ 0.392328] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
[ 0.392338] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
[ 0.392348] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
[ 0.392358] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
[ 0.392400] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
[ 0.392423] pci 0000:00:14.2: reg 10: [mem 0xfe020000-0xfe023fff 64bit]
[ 0.392494] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.392512] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
[ 0.392591] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
[ 0.392642] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600
[ 0.392661] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600
[ 0.392677] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600
[ 0.392692] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600
[ 0.392711] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600
[ 0.392733] PCI: peer root bus 00 res updated from pci conf
[ 0.392770] pci 0000:01:00.0: [10de:0403] type 0 class 0x000300
[ 0.392781] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
[ 0.392792] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.392803] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
[ 0.392811] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
[ 0.392819] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.400034] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.400038] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.400041] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.400046] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.400089] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
[ 0.400105] pci 0000:02:00.0: reg 10: [io 0xee00-0xeeff]
[ 0.400129] pci 0000:02:00.0: reg 18: [mem 0xfddff000-0xfddfffff 64bit]
[ 0.400158] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.400220] pci 0000:02:00.0: supports D1 D2
[ 0.400222] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.400245] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with ‘pcie_aspm=force’
[ 0.400253] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 0.400257] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.400260] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.400264] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.400305] pci 0000:03:08.0: [1106:3044] type 0 class 0x000c00
[ 0.400329] pci 0000:03:08.0: reg 10: [mem 0xfdfff000-0xfdfff7ff]
[ 0.400343] pci 0000:03:08.0: reg 14: [io 0xcf00-0xcf7f]
[ 0.400440] pci 0000:03:08.0: supports D2
[ 0.400442] pci 0000:03:08.0: PME# supported from D2 D3hot D3cold
[ 0.400491] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
[ 0.400496] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.400501] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.400506] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
[ 0.400509] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.400512] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.400515] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.400518] pci 0000:00:14.4: bridge window [mem 0xe0400000-0xfcffffffff] (subtractive decode)
[ 0.400521] pci 0000:00:14.4: bridge window [mem 0xe0100000-0xe03fffff] (subtractive decode)
[ 0.400535] ACPI: PCI Interrupt Routing Table [_SB.PCI0.PRT]
[ 0.400779] ACPI: PCI Interrupt Routing Table [_SB.PCI0.P2P.PRT]
[ 0.400878] ACPI: PCI Interrupt Routing Table [_SB.PCI0.PCE2.PRT]
[ 0.400923] ACPI: PCI Interrupt Routing Table [_SB.PCI0.PCE7._PRT]
[ 0.400962] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.400966] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
[ 0.400969] ACPI OSC control for PCIe not granted, disabling ASPM
[ 0.416248] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.416296] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.416341] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.416385] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.416429] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.416473] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.416516] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.416561] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.416656] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.416656] vgaarb: loaded
[ 0.416656] vgaarb: bridge control possible 0000:01:00.0
[ 0.416656] PCI: Using ACPI for IRQ routing
[ 0.425949] PCI: pci_cache_line_size set to 64 bytes
[ 0.426026] Expanded resource reserved due to conflict with PCI Bus #00
[ 0.426029] reserve RAM buffer: 000000000009f400 - 000000000009ffff
[ 0.426032] reserve RAM buffer: 00000000bffe0000 - 00000000bfffffff
[ 0.426167] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.426172] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.428062] Switching to clocksource hpet
[ 0.430011] pnp: PnP ACPI init
[ 0.430028] ACPI: bus type pnp registered
[ 0.430118] pnp 00:00: [bus 00-ff]
[ 0.430121] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.430123] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.430126] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.430128] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.430131] pnp 00:00: [mem 0x000c0000-0x000dffff window]
[ 0.430134] pnp 00:00: [mem 0xd0000000-0xfebfffff window]
[ 0.430182] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.430329] pnp 00:01: [io 0x4100-0x411f]
[ 0.430332] pnp 00:01: [io 0x0228-0x022f]
[ 0.430334] pnp 00:01: [io 0x040b]
[ 0.430336] pnp 00:01: [io 0x04d6]
[ 0.430338] pnp 00:01: [io 0x0c00-0x0c01]
[ 0.430340] pnp 00:01: [io 0x0c14]
[ 0.430342] pnp 00:01: [io 0x0c50-0x0c52]
[ 0.430344] pnp 00:01: [io 0x0c6c-0x0c6d]
[ 0.430346] pnp 00:01: [io 0x0c6f]
[ 0.430348] pnp 00:01: [io 0x0cd0-0x0cd1]
[ 0.430351] pnp 00:01: [io 0x0cd2-0x0cd3]
[ 0.430354] pnp 00:01: [io 0x0cd4-0x0cdf]
[ 0.430356] pnp 00:01: [io 0x4000-0x40fe]
[ 0.430358] pnp 00:01: [io 0x4210-0x4217]
[ 0.430360] pnp 00:01: [io 0x0b10-0x0b1f]
[ 0.430362] pnp 00:01: [mem 0x00000000-0x00000fff window]
[ 0.430365] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
[ 0.430400] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.430407] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
[ 0.430450] system 00:01: [io 0x4100-0x411f] has been reserved
[ 0.430453] system 00:01: [io 0x0228-0x022f] has been reserved
[ 0.430456] system 00:01: [io 0x040b] has been reserved
[ 0.430459] system 00:01: [io 0x04d6] has been reserved
[ 0.430461] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 0.430464] system 00:01: [io 0x0c14] has been reserved
[ 0.430467] system 00:01: [io 0x0c50-0x0c52] has been reserved
[ 0.430470] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
[ 0.430472] system 00:01: [io 0x0c6f] has been reserved
[ 0.430475] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 0.430478] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 0.430480] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
[ 0.430483] system 00:01: [io 0x4000-0x40fe] has been reserved
[ 0.430487] system 00:01: [io 0x4210-0x4217] has been reserved
[ 0.430490] system 00:01: [io 0x0b10-0x0b1f] has been reserved
[ 0.430494] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
[ 0.430497] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.430600] pnp 00:02: [dma 4]
[ 0.430603] pnp 00:02: [io 0x0000-0x000f]
[ 0.430605] pnp 00:02: [io 0x0080-0x0090]
[ 0.430607] pnp 00:02: [io 0x0094-0x009f]
[ 0.430609] pnp 00:02: [io 0x00c0-0x00df]
[ 0.430641] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.430691] pnp 00:03: [irq 0 disabled]
[ 0.430706] pnp 00:03: [irq 8]
[ 0.430708] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.430741] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.430770] pnp 00:04: [io 0x0070-0x0073]
[ 0.430803] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.430812] pnp 00:05: [io 0x0061]
[ 0.430842] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.430852] pnp 00:06: [io 0x00f0-0x00ff]
[ 0.430860] pnp 00:06: [irq 13]
[ 0.430893] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.430925] pnp 00:07: [io 0x0010-0x001f]
[ 0.430927] pnp 00:07: [io 0x0022-0x003f]
[ 0.430929] pnp 00:07: [io 0x0044-0x005f]
[ 0.430931] pnp 00:07: [io 0x0062-0x0063]
[ 0.430934] pnp 00:07: [io 0x0065-0x006f]
[ 0.430936] pnp 00:07: [io 0x0074-0x007f]
[ 0.430938] pnp 00:07: [io 0x0091-0x0093]
[ 0.430940] pnp 00:07: [io 0x00a2-0x00bf]
[ 0.430942] pnp 00:07: [io 0x00e0-0x00ef]
[ 0.430944] pnp 00:07: [io 0x04d0-0x04d1]
[ 0.430947] pnp 00:07: [io 0x0220-0x0225]
[ 0.430949] pnp 00:07: [io 0x0b00-0x0b0f]
[ 0.430952] pnp 00:07: [io 0x0060-0x0064]
[ 0.431014] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.431018] system 00:07: [io 0x0220-0x0225] has been reserved
[ 0.431020] system 00:07: [io 0x0b00-0x0b0f] has been reserved
[ 0.431024] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.431321] pnp 00:08: [io 0x03f8-0x03ff]
[ 0.431330] pnp 00:08: [irq 4]
[ 0.431401] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.431632] pnp 00:09: [mem 0xe0000000-0xefffffff]
[ 0.431688] system 00:09: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.431691] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.431768] pnp 00:0a: [mem 0x000f0000-0x000fffff]
[ 0.431771] pnp 00:0a: [mem 0xfed00000-0xfed000ff]
[ 0.431773] pnp 00:0a: [mem 0xbffe0000-0xbfffffff]
[ 0.431776] pnp 00:0a: [mem 0xffff0000-0xffffffff]
[ 0.431778] pnp 00:0a: [mem 0x00000000-0x0009ffff]
[ 0.431780] pnp 00:0a: [mem 0x00100000-0xbffdffff]
[ 0.431783] pnp 00:0a: [mem 0x00000000-0xffffffffffffffff disabled]
[ 0.431785] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
[ 0.431788] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
[ 0.431790] pnp 00:0a: [mem 0xfff80000-0xfffeffff]
[ 0.431817] pnp 00:0a: [Firmware Bug]: [mem 0x00000000-0xffffffffffffffff disabled] covers only part of AMD MMCONFIG area [mem 0xe0000000-0xe00fffff]; adding more reservations
[ 0.431831] system 00:0a: [mem 0x000f0000-0x000fffff] could not be reserved
[ 0.431834] system 00:0a: [mem 0xfed00000-0xfed000ff] has been reserved
[ 0.431837] system 00:0a: [mem 0xbffe0000-0xbfffffff] could not be reserved
[ 0.431840] system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
[ 0.431844] system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
[ 0.431847] system 00:0a: [mem 0x00100000-0xbffdffff] could not be reserved
[ 0.431850] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.431853] system 00:0a: [mem 0xfee00000-0xfee00fff] could not be reserved
[ 0.431856] system 00:0a: [mem 0xfff80000-0xfffeffff] has been reserved
[ 0.431860] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.431880] pnp: PnP ACPI: found 11 devices
[ 0.431882] ACPI: ACPI bus type pnp unregistered
[ 0.439930] PCI: max bus depth: 1 pci_try_num: 2
[ 0.439950] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
[ 0.439953] pci 0000:00:02.0: PCI bridge to [bus 01-01]
[ 0.439956] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
[ 0.439960] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
[ 0.439963] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.439968] pci 0000:02:00.0: BAR 6: assigned [mem 0xfdc00000-0xfdc1ffff pref]
[ 0.439970] pci 0000:00:07.0: PCI bridge to [bus 02-02]
[ 0.439973] pci 0000:00:07.0: bridge window [io 0xe000-0xefff]
[ 0.439976] pci 0000:00:07.0: bridge window [mem 0xfdd00000-0xfddfffff]
[ 0.439980] pci 0000:00:07.0: bridge window [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.439984] pci 0000:00:14.4: PCI bridge to [bus 03-03]
[ 0.439987] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 0.439993] pci 0000:00:14.4: bridge window [mem 0xfdf00000-0xfdffffff]
[ 0.440010] pci 0000:00:14.4: bridge window [mem 0xfde00000-0xfdefffff pref]
[ 0.440022] pci 0000:00:02.0: setting latency timer to 64
[ 0.440027] pci 0000:00:07.0: setting latency timer to 64
[ 0.440034] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.440037] pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.440040] pci_bus 0000:00: resource 6 [mem 0xc0000000-0xdfffffff]
[ 0.440042] pci_bus 0000:00: resource 7 [mem 0xe0400000-0xfcffffffff]
[ 0.440045] pci_bus 0000:00: resource 8 [mem 0xe0100000-0xe03fffff]
[ 0.440047] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 0.440050] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
[ 0.440053] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.440055] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.440058] pci_bus 0000:02: resource 1 [mem 0xfdd00000-0xfddfffff]
[ 0.440060] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff 64bit pref]
[ 0.440063] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
[ 0.440066] pci_bus 0000:03: resource 1 [mem 0xfdf00000-0xfdffffff]
[ 0.440068] pci_bus 0000:03: resource 2 [mem 0xfde00000-0xfdefffff pref]
[ 0.440071] pci_bus 0000:03: resource 4 [io 0x0000-0xffff]
[ 0.440073] pci_bus 0000:03: resource 5 [mem 0x000a0000-0x000bffff]
[ 0.440076] pci_bus 0000:03: resource 6 [mem 0xc0000000-0xdfffffff]
[ 0.440079] pci_bus 0000:03: resource 7 [mem 0xe0400000-0xfcffffffff]
[ 0.440081] pci_bus 0000:03: resource 8 [mem 0xe0100000-0xe03fffff]
[ 0.440232] NET: Registered protocol family 2
[ 0.440410] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.441879] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.446162] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.446713] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.446716] TCP reno registered
[ 0.446727] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.446777] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.446980] NET: Registered protocol family 1
[ 0.868134] pci 0000:01:00.0: Boot video device
[ 0.868145] PCI: CLS 4 bytes, default 64
[ 0.868214] Unpacking initramfs…
[ 1.113239] Freeing initrd memory: 9968k freed
[ 1.118203] IBS: LVT offset 1 assigned
[ 1.118236] perf: AMD IBS detected (0x00000007)
[ 1.118576] audit: initializing netlink socket (disabled)
[ 1.118596] type=2000 audit(1390662829.112:1): initialized
[ 1.133631] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.134501] VFS: Disk quotas dquot_6.5.2
[ 1.134549] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.134637] msgmni has been set to 6041
[ 1.134907] alg: No test for stdrng (krng)
[ 1.134959] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.134963] io scheduler noop registered
[ 1.134965] io scheduler deadline registered
[ 1.135007] io scheduler cfq registered (default)
[ 1.135236] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.135259] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.135261] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.135621] ERST: Table is not found!
[ 1.135623] GHES: HEST is not enabled!
[ 1.135696] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.156202] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.328878] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.329285] Linux agpgart interface v0.103
[ 1.329410] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.329842] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.329852] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.330006] mousedev: PS/2 mouse device common for all mice
[ 1.330064] rtc_cmos 00:04: RTC can wake from S4
[ 1.330228] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 1.330270] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.330283] cpuidle: using governor ladder
[ 1.330285] cpuidle: using governor menu
[ 1.330523] TCP cubic registered
[ 1.330655] NET: Registered protocol family 10
[ 1.331201] Mobile IPv6
[ 1.331204] NET: Registered protocol family 17
[ 1.331209] Registering the dns_resolver key type
[ 1.331392] PM: Hibernation image not present or could not be loaded.
[ 1.331406] registered taskstats version 1
[ 1.331901] rtc_cmos 00:04: setting system clock to 2014-01-25 15:13:50 UTC (1390662830)
[ 1.331945] Initializing network drop monitor service
[ 1.333371] Freeing unused kernel memory: 576k freed
[ 1.333627] Write protecting the kernel read-only data: 6144k
[ 1.336548] Freeing unused kernel memory: 652k freed
[ 1.339984] Freeing unused kernel memory: 692k freed
[ 1.359797] udevd[58]: starting version 175
[ 1.380081] SCSI subsystem initialized
[ 1.383173] usbcore: registered new interface driver usbfs
[ 1.383213] usbcore: registered new interface driver hub
[ 1.399572] usbcore: registered new device driver usb
[ 1.400467] ehci_hcd: USB 2.0 ‘Enhanced’ Host Controller (EHCI) Driver
[ 1.400594] ehci_hcd 0000:00:13.5: EHCI Host Controller
[ 1.400651] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
[ 1.400694] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
[ 1.400709] ehci_hcd 0000:00:13.5: debug port 1
[ 1.400752] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
[ 1.403155] libata version 3.00 loaded.
[ 1.407247] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.407323] r8169 0000:02:00.0: setting latency timer to 64
[ 1.407390] r8169 0000:02:00.0: irq 40 for MSI/MSI-X
[ 1.407941] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90000662000, 00:1e:90:05:df:27, XID 18000000 IRQ 40
[ 1.407945] r8169 0000:02:00.0: eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
[ 1.412063] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
[ 1.412123] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.412126] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.412129] usb usb1: Product: EHCI Host Controller
[ 1.412131] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.412133] usb usb1: SerialNumber: 0000:00:13.5
[ 1.412444] hub 1-0:1.0: USB hub found
[ 1.412454] hub 1-0:1.0: 10 ports detected
[ 1.413326] ohci_hcd: USB 1.1 ‘Open’ Host Controller (OHCI) Driver
[ 1.413447] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 1.413473] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
[ 1.413528] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
[ 1.417562] ACPI: Fan [FAN] (on)
[ 1.418187] ACPI Warning: For _TZ.THRM._PSL: Return Package has no elements (empty) (20110623/nspredef-463)
[ 1.418196] ACPI: [Package] has zero elements (ffff880036fabe40)
[ 1.418254] ACPI: Invalid passive threshold
[ 1.418466] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.418469] ACPI: Thermal Zone [THRM] (40 C)
[ 1.476066] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.476070] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.476073] usb usb2: Product: OHCI Host Controller
[ 1.476076] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 1.476078] usb usb2: SerialNumber: 0000:00:13.0
[ 1.476180] firewire_ohci: Added fw-ohci device 0000:03:08.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
[ 1.476399] hub 2-0:1.0: USB hub found
[ 1.476408] hub 2-0:1.0: 2 ports detected
[ 1.476601] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 1.476613] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
[ 1.476658] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
[ 1.536020] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.536023] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.536026] usb usb3: Product: OHCI Host Controller
[ 1.536028] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 1.536030] usb usb3: SerialNumber: 0000:00:13.1
[ 1.536177] hub 3-0:1.0: USB hub found
[ 1.536183] hub 3-0:1.0: 2 ports detected
[ 1.536322] ohci_hcd 0000:00:13.2: OHCI Host Controller
[ 1.536334] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.536365] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
[ 1.596032] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.596035] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.596037] usb usb4: Product: OHCI Host Controller
[ 1.596040] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 1.596042] usb usb4: SerialNumber: 0000:00:13.2
[ 1.596177] hub 4-0:1.0: USB hub found
[ 1.596183] hub 4-0:1.0: 2 ports detected
[ 1.596306] ohci_hcd 0000:00:13.3: OHCI Host Controller
[ 1.596316] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
[ 1.596333] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
[ 1.656018] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.656021] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.656023] usb usb5: Product: OHCI Host Controller
[ 1.656025] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 1.656027] usb usb5: SerialNumber: 0000:00:13.3
[ 1.656156] hub 5-0:1.0: USB hub found
[ 1.656162] hub 5-0:1.0: 2 ports detected
[ 1.656283] ohci_hcd 0000:00:13.4: OHCI Host Controller
[ 1.656295] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
[ 1.656311] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
[ 1.716023] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.716026] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.716030] usb usb6: Product: OHCI Host Controller
[ 1.716032] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 1.716034] usb usb6: SerialNumber: 0000:00:13.4
[ 1.716173] hub 6-0:1.0: USB hub found
[ 1.716179] hub 6-0:1.0: 2 ports detected
[ 1.716312] ahci 0000:00:12.0: version 3.0
[ 1.716378] ahci 0000:00:12.0: controller can’t do 64bit DMA, forcing 32bit
[ 1.716504] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.716508] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
[ 1.717475] scsi0 : ahci
[ 1.717666] scsi1 : ahci
[ 1.717779] scsi2 : ahci
[ 1.717886] scsi3 : ahci
[ 1.718034] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 16
[ 1.718038] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 16
[ 1.718042] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 16
[ 1.718046] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 16
[ 1.718634] scsi4 : pata_atiixp
[ 1.718750] scsi5 : pata_atiixp
[ 1.719393] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
[ 1.719396] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
[ 1.840046] usb 1-5: new high-speed USB device number 4 using ehci_hcd
[ 1.976156] firewire_core: created device fw0: GUID 00001921ff2ae480, S400
[ 2.040054] ata3: SATA link down (SStatus 0 SControl 300)
[ 2.040123] ata4: SATA link down (SStatus 0 SControl 300)
[ 2.066618] usb 1-5: New USB device found, idVendor=07b8, idProduct=e004
[ 2.066621] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.066624] usb 1-5: Product: USB 2.0 All-in-1 Card Reader
[ 2.066626] usb 1-5: Manufacturer: Generic
[ 2.066628] usb 1-5: SerialNumber: 070919015146000684
[ 2.071511] Initializing USB Mass Storage driver…
[ 2.071727] scsi6 : usb-storage 1-5:1.0
[ 2.071837] usbcore: registered new interface driver usb-storage
[ 2.071839] USB Mass Storage support registered.
[ 2.116023] Refined TSC clocksource calibration: 2199.749 MHz.
[ 2.116030] Switching to clocksource tsc
[ 2.212025] ata1: softreset failed (device not ready)
[ 2.212082] ata1: applying PMP SRST workaround and retrying
[ 2.216021] ata2: softreset failed (device not ready)
[ 2.216077] ata2: applying PMP SRST workaround and retrying
[ 2.332015] usb 2-1: new low-speed USB device number 2 using ohci_hcd
[ 2.384030] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.388032] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.390570] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H60N, CV02, max UDMA/100
[ 2.390575] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.394258] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.394261] ata2.00: configured for UDMA/100
[ 2.434249] ata1.00: ATA-7: ST3360320AS, 3.AAM, max UDMA/133
[ 2.434252] ata1.00: 703282608 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.434256] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.492551] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
[ 2.492554] ata1.00: configured for UDMA/133
[ 2.492784] scsi 0:0:0:0: Direct-Access ATA ST3360320AS 3.AA PQ: 0 ANSI: 5
[ 2.504073] usb 2-1: New USB device found, idVendor=04ca, idProduct=0050
[ 2.504077] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.504079] usb 2-1: Product: USB Multimedia Keyboard
[ 2.504081] usb 2-1: Manufacturer: Lite-On Technology Corp.
[ 2.512368] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H60N CV02 PQ: 0 ANSI: 5
[ 2.519996] sd 0:0:0:0: [sda] 703282608 512-byte logical blocks: (360 GB/335 GiB)
[ 2.520078] sd 0:0:0:0: [sda] Write Protect is off
[ 2.520084] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.520127] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn’t support DPO or FUA
[ 2.522373] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.0/input/input0
[ 2.522458] generic-usb 0003:04CA:0050.0001: input,hidraw0: USB HID v1.10 Keyboard [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:00:13.0-1/input0
[ 2.530193] input: Lite-On Technology Corp. USB Multimedia Keyboard as /devices/pci0000:00/0000:00:13.0/usb2/2-1/2-1:1.1/input/input1
[ 2.530264] generic-usb 0003:04CA:0050.0002: input,hidraw1: USB HID v1.10 Device [Lite-On Technology Corp. USB Multimedia Keyboard] on usb-0000:00:13.0-1/input1
[ 2.530291] usbcore: registered new interface driver usbhid
[ 2.530293] usbhid: USB HID core driver
[ 2.566510] sda: sda1 sda2 < sda5 > sda3 sda4
[ 2.567167] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.570373] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.570738] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.633423] sr0: scsi3-mmc drive: 14x/14x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.633430] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.633612] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.768032] usb 2-2: new low-speed USB device number 3 using ohci_hcd
[ 2.935077] usb 2-2: New USB device found, idVendor=093a, idProduct=2510
[ 2.935082] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.935085] usb 2-2: Product: USB OPTICAL MOUSE
[ 2.935087] usb 2-2: Manufacturer: PIXART
[ 2.944295] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input2
[ 2.944420] generic-usb 0003:093A:2510.0003: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-2/input0
[ 3.098781] scsi 6:0:0:0: Direct-Access Generic 2.0 Reader -0 1.20 PQ: 0 ANSI: 0 CCS
[ 3.129277] scsi 6:0:0:1: Direct-Access Generic 2.0 Reader -1 1.20 PQ: 0 ANSI: 0 CCS
[ 3.159777] scsi 6:0:0:2: Direct-Access Generic 2.0 Reader -2 1.20 PQ: 0 ANSI: 0 CCS
[ 3.190279] scsi 6:0:0:3: Direct-Access Generic 2.0 Reader -3 1.20 PQ: 0 ANSI: 0 CCS
[ 3.220781] scsi 6:0:0:4: Direct-Access Generic 2.0 Reader -4 1.20 PQ: 0 ANSI: 0 CCS
[ 3.221455] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3.221713] sd 6:0:0:1: Attached scsi generic sg3 type 0
[ 3.222804] sd 6:0:0:2: Attached scsi generic sg4 type 0
[ 3.223554] sd 6:0:0:3: Attached scsi generic sg5 type 0
[ 3.224107] sd 6:0:0:4: Attached scsi generic sg6 type 0
[ 3.233976] sd 6:0:0:3: [sde] Attached SCSI removable disk
[ 3.245558] sd 6:0:0:1: [sdc] Attached SCSI removable disk
[ 3.247432] sd 6:0:0:4: [sdf] Attached SCSI removable disk
[ 3.248436] sd 6:0:0:2: [sdd] Attached SCSI removable disk
[ 3.249426] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.511504] PM: Starting manual resume from disk
[ 3.511508] PM: Hibernation image partition 8:3 present
[ 3.511510] PM: Looking for hibernation image.
[ 3.524500] PM: Image not found (code -22)
[ 3.524504] PM: Hibernation image not present or could not be loaded.
[ 3.564580] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 4.865867] udevd[405]: starting version 175
[ 4.981600] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 4.981609] ACPI: Power Button [PWRB]
[ 4.981701] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 4.981704] ACPI: Power Button [PWRF]
[ 5.292189] k10temp 0000:00:18.3: unreliable CPU thermal sensor; monitoring disabled
[ 5.295117] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xfa00, revision 0
[ 5.306451] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
[ 5.306573] SP5100 TCO timer: mmio address 0xfec000f0 already in use
[ 5.312431] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 5.323798] powernow-k8: Found 1 AMD Phenom™ 9500 Quad-Core Processor (4 cpu cores) (version 2.20.00)
[ 5.323854] powernow-k8: 0 : pstate 0 (2200 MHz)
[ 5.323856] powernow-k8: 1 : pstate 1 (1100 MHz)
[ 5.345444] EDAC MC: Ver: 2.1.0
[ 5.352768] MCE: In-kernel MCE decoding enabled.
[ 5.364196] AMD64 EDAC driver v3.4.0
[ 5.364310] EDAC amd64: DRAM ECC disabled.
[ 5.364334] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 5.364338] Either enable ECC checking or force module loading by setting ‘ecc_enable_override’.
[ 5.364341] (Note that use of the override may cause unknown side effects.)
[ 5.534811] [drm] Initialized drm 1.1.0 20060810
[ 5.561068] Error: Driver ‘pcspkr’ is already registered, aborting…
[ 5.674170] wmi: Mapper loaded
[ 5.760966] nouveau 0000:01:00.0: setting latency timer to 64
[ 5.760998] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x084300a2)
[ 5.766905] [drm] nouveau 0000:01:00.0: Checking PRAMIN for VBIOS
[ 5.823494] [drm] nouveau 0000:01:00.0: … appears to be valid
[ 5.823499] [drm] nouveau 0000:01:00.0: Using VBIOS from PRAMIN
[ 5.823508] [drm] nouveau 0000:01:00.0: BIT BIOS found
[ 5.823515] [drm] nouveau 0000:01:00.0: Bios version 60.84.43.00
[ 5.823523] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[ 5.823914] hda_codec: ALC888: BIOS auto-probing.
[ 5.824212] [drm] nouveau 0000:01:00.0: MXM: no VBIOS data, nothing to do
[ 5.824217] [drm] nouveau 0000:01:00.0: DCB version 4.0
[ 5.824224] [drm] nouveau 0000:01:00.0: DCB outp 00: 04000310 00000028
[ 5.824230] [drm] nouveau 0000:01:00.0: DCB outp 01: 01011302 00020030
[ 5.824235] [drm] nouveau 0000:01:00.0: DCB outp 02: 02011300 00000028
[ 5.824240] [drm] nouveau 0000:01:00.0: DCB outp 03: 010223f1 00c0c083
[ 5.824246] [drm] nouveau 0000:01:00.0: DCB conn 00: 0000
[ 5.824251] [drm] nouveau 0000:01:00.0: DCB conn 01: 1130
[ 5.824256] [drm] nouveau 0000:01:00.0: DCB conn 02: 0210
[ 5.824261] [drm] nouveau 0000:01:00.0: DCB conn 03: 0211
[ 5.824265] [drm] nouveau 0000:01:00.0: DCB conn 04: 0213
[ 5.824274] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xBEEE
[ 5.847362] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC22E
[ 5.863605] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xCE6F
[ 5.863618] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xCF61
[ 5.864703] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xD187
[ 5.864708] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xD1EC
[ 5.884559] [drm] nouveau 0000:01:00.0: 0xD1EC: Condition still not met after 20ms, skipping following opcodes
[ 5.888039] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
[ 5.899920] [TTM] Zone kernel: Available graphics memory: 1547544 kiB
[ 5.899926] [TTM] Initializing pool allocator
[ 5.899941] [TTM] Initializing DMA pool allocator
[ 5.899964] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM (DDR2)
[ 5.903548] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[ 5.917250] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input7
[ 5.917914] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
[ 5.917919] [drm] nouveau 0000:01:00.0: TV-1 has no encoders, removing
[ 5.918850] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.918854] [drm] No driver support for vblank timestamp query.
[ 5.926167] [drm] nouveau 0000:01:00.0: 1 available performance level(s)
[ 5.926179] [drm] nouveau 0000:01:00.0: 0: core 540MHz shader 1188MHz memory 405MHz fanspeed 100%
[ 5.926188] [drm] nouveau 0000:01:00.0: c: core 540MHz shader 1188MHz memory 399MHz voltage 1320mV
[ 6.044999] [drm] nouveau 0000:01:00.0: allocated 1440x900 fb: 0x320000, bo ffff8800370ef800
[ 6.045148] fbcon: nouveaufb (fb0) is primary device
[ 6.068541] Console: switching to colour frame buffer device 180x56
[ 6.069661] fb0: nouveaufb frame buffer device
[ 6.069665] drm: registered panic notifier
[ 6.069675] [drm] Initialized nouveau 1.0.0 20120316 for 0000:01:00.0 on minor 0
[ 6.944345] Adding 9765884k swap on /dev/sda3. Priority:-1 extents:1 across:9765884k
[ 6.978495] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 7.271480] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 7.369774] loop: module loaded
[ 8.417114] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 57.828159] usb 2-2: USB disconnect, device number 3
[ 59.532029] usb 2-2: new low-speed USB device number 4 using ohci_hcd
[ 59.699100] usb 2-2: New USB device found, idVendor=093a, idProduct=2510
[ 59.699107] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 59.699113] usb 2-2: Product: USB OPTICAL MOUSE
[ 59.699117] usb 2-2: Manufacturer: PIXART
[ 59.708505] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input8
[ 59.708803] generic-usb 0003:093A:2510.0004: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-2/input0
[ 96.316034] usb 1-9: new high-speed USB device number 6 using ehci_hcd
[ 96.448863] usb 1-9: New USB device found, idVendor=0204, idProduct=1976
[ 96.448871] usb 1-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 96.448877] usb 1-9: Product: Flash Disk
[ 96.448881] usb 1-9: Manufacturer: USB 2.0
[ 96.448885] usb 1-9: SerialNumber: 170900285A520000
[ 96.449480] scsi7 : usb-storage 1-9:1.0
[ 97.448794] scsi 7:0:0:0: Direct-Access USB 2.0 Flash Disk 5.00 PQ: 0 ANSI: 2
[ 97.450149] sd 7:0:0:0: Attached scsi generic sg7 type 0
[ 97.450649] sd 7:0:0:0: [sdg] 8192000 512-byte logical blocks: (4.19 GB/3.90 GiB)
[ 97.451158] sd 7:0:0:0: [sdg] Write Protect is off
[ 97.451168] sd 7:0:0:0: [sdg] Mode Sense: 0b 00 00 08
[ 97.451775] sd 7:0:0:0: [sdg] No Caching mode page present
[ 97.451817] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 97.454260] sd 7:0:0:0: [sdg] No Caching mode page present
[ 97.454295] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 97.455064] sdg: sdg1
[ 97.457649] sd 7:0:0:0: [sdg] No Caching mode page present
[ 97.457691] sd 7:0:0:0: [sdg] Assuming drive cache: write through
[ 97.457710] sd 7:0:0:0: [sdg] Attached SCSI removable disk
[ 107.810185] usb 2-2: USB disconnect, device number 4
[ 109.512024] usb 2-2: new low-speed USB device number 5 using ohci_hcd
[ 109.679121] usb 2-2: New USB device found, idVendor=093a, idProduct=2510
[ 109.679127] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 109.679132] usb 2-2: Product: USB OPTICAL MOUSE
[ 109.679136] usb 2-2: Manufacturer: PIXART
[ 109.688505] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input9
[ 109.688756] generic-usb 0003:093A:2510.0005: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-2/input0
[ 157.669190] usb 2-2: USB disconnect, device number 5
[ 159.372030] usb 2-2: new low-speed USB device number 6 using ohci_hcd
[ 159.539140] usb 2-2: New USB device found, idVendor=093a, idProduct=2510
[ 159.539147] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 159.539152] usb 2-2: Product: USB OPTICAL MOUSE
[ 159.539156] usb 2-2: Manufacturer: PIXART
[ 159.548526] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input10
[ 159.548800] generic-usb 0003:093A:2510.0006: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-2/input0
[ 182.931357] FAT-fs (sdg1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 207.504345] usb 2-2: USB disconnect, device number 6
[ 209.208031] usb 2-2: new low-speed USB device number 7 using ohci_hcd
[ 209.375163] usb 2-2: New USB device found, idVendor=093a, idProduct=2510
[ 209.375171] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 209.375177] usb 2-2: Product: USB OPTICAL MOUSE
[ 209.375181] usb 2-2: Manufacturer: PIXART
[ 209.384572] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input11
[ 209.384857] generic-usb 0003:093A:2510.0007: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-2/input0
[ 257.359457] usb 2-2: USB disconnect, device number 7
[ 259.064030] usb 2-2: new low-speed USB device number 8 using ohci_hcd
[ 259.231182] usb 2-2: New USB device found, idVendor=093a, idProduct=2510
[ 259.231189] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 259.231195] usb 2-2: Product: USB OPTICAL MOUSE
[ 259.231199] usb 2-2: Manufacturer: PIXART
[ 259.240561] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input12
[ 259.240840] generic-usb 0003:093A:2510.0008: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-2/input0
[ 307.206253] usb 2-2: USB disconnect, device number 8
[ 308.908034] usb 2-2: new low-speed USB device number 9 using ohci_hcd
[ 309.075202] usb 2-2: New USB device found, idVendor=093a, idProduct=2510
[ 309.075209] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 309.075214] usb 2-2: Product: USB OPTICAL MOUSE
[ 309.075218] usb 2-2: Manufacturer: PIXART
[ 309.084606] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input13
[ 309.084885] generic-usb 0003:093A:2510.0009: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-2/input0
[ 357.038269] usb 2-2: USB disconnect, device number 9
[ 358.740027] usb 2-2: new low-speed USB device number 10 using ohci_hcd
[ 358.907220] usb 2-2: New USB device found, idVendor=093a, idProduct=2510
[ 358.907227] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 358.907233] usb 2-2: Product: USB OPTICAL MOUSE
[ 358.907237] usb 2-2: Manufacturer: PIXART
[ 358.916601] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input14
[ 358.916881] generic-usb 0003:093A:2510.000A: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-2/input0
[ 406.898273] usb 2-2: USB disconnect, device number 10
[ 408.600032] usb 2-2: new low-speed USB device number 11 using ohci_hcd
[ 408.767242] usb 2-2: New USB device found, idVendor=093a, idProduct=2510
[ 408.767250] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 408.767255] usb 2-2: Product: USB OPTICAL MOUSE
[ 408.767260] usb 2-2: Manufacturer: PIXART
[ 408.776628] input: PIXART USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:13.0/usb2/2-2/2-2:1.0/input/input15
[ 408.776912] generic-usb 0003:093A:2510.000B: input,hidraw2: USB HID v1.11 Mouse [PIXART USB OPTICAL MOUSE] on usb-0000:00:13.0-2/input0[/code]

#3

Salut,

quelle image de cd/dvd a tu utilisé ? install réseau? A tu bien sélectionné l’installation de l’interface graphique?

Essai d’en installer une :

ou

par exemple…

#4

Salut,

Le fichier intéressant à consulter serait [mono]/var/log/Xorg.0.log[/mono]

C’est lui qui te dira pourquoi Xorg ne se lance pas.

Je penche pour une version trop vieille des drivers nouveau pour ta carte nvidia.

Un apt-cache policy xserver-xorg-core… indiquera si tu as un environnement graphique installé ou non.

#5

Bonsoir,
Merci pour vos réponse.

J’ai installé Debian Wheezy amd 64.

Petit problème, je ne disposes pas d’internet sur cette ordinateur.
Je disposes cependant d’internet sur un autre ordinateur portable.

Du coup les commandes apt-get install ne fonctionne pas.

Sinon aucun /var/log/Xorg.0.log n’est présent

#apt-cache policy xserver-xorg-core N: Impossible de trouver le paquet xserver-xorg-core

Sinon

[code]#ls /var/log

alternatives.log
apt
auth.log
btmp
daemon.log
debug
dmesg
dmesg.0
dmesg.1.gz
dmesg.2.gz
dmesg.3.gz
dmesg.4.gz
dpkg.log
faillog
fsck
installer
kern.log
lastlog
lpr.log
mail.err
mail.info
mail.log
mail.warn
messages
news
syslog
user.log
wtmp[/code]

#6

Pourquoi, ta carte réseau ne fonctionne pas ? Ou tu ne peux simplement pas le relier ?

Ton problème semble être que tu n’as pas de bons dépots configurés. Tu peux coller le contenu de ton fichier [mono]/etc/apt/sources.list[/mono] sur ce forum.

#7

Oui, je ne peux pas relier mon ordinateur au câble Ethernet…

Voici le contenu de mon sources.list

deb cdrom:[Debian GNU/Linux 7.1.0 Wheezy - Official amd64 NETINST Binary-1 20130615-23:04]/ wheezy main

#8

Tu sembles donc être parti d’une image ISO netinstall pour installer ta Debian sur une machine qui n’a pas accès aux dépôts (cause pas d’accès au net). En tout cas c’est ce que je comprends.

Si c’est le cas :
– trouver un moyen de raccorder la machine à internet pour finaliser l’installation (il faut alors répondre aux questions de Zbf « Pourquoi, ta carte réseau ne fonctionne pas ? Ou tu ne peux simplement pas le relier ? »)
– refaire une installation à partir d’une image DVD ou CD selon tes besoins (là ça dépend de ce que tu souhaites faire de ta machine)

Bon courage !

#9

Salut,

[quote=“raph81212”]Petit problème, je ne disposes pas d’internet sur cette ordinateur.
Je disposes cependant d’internet sur un autre ordinateur portable.[/quote]

Comment ajouter des paquets ou mettre à jour sans Internet ?

Il te faudras adapter un tant soit peu le tuto sous Debian pour ce faire. :wink:

Impossible de se connecter

Offline Package Management for APT

apt offline benutzen

etc … duckduckgo.com/?q=apt-offline

Tu devrais pouvoir avancer à présent. 8)

[quote][16:24:38]:~$ apt-cache policy apt-offline
apt-offline:
Installé : (aucun)
Candidat : 1.2
Table de version :
1.3.1 0
97 ftp.fr.debian.org/debian/ testing/main i386 Packages
95 ftp.fr.debian.org/debian/ unstable/main i386 Packages
1.2 0
990 ftp.fr.debian.org/debian/ stable/main i386 Packages
0.9.9squeeze3 0
500 ftp.fr.debian.org/debian/ oldstable/main i386 Packages
[16:24:39]:~$
[/quote]

* edit *

Et si le besoin s’en fait sentir …

[quote][16:47:41]:~$ ash apt-offline-gui
Paquet : apt-offline-gui
Nouveau: oui
État: non installé
Version : 1.2
Priorité : optionnel
Section : admin
Responsable : Ritesh Raj Sarraf rrs@debian.org
Architecture : all
Taille décompressée : 264 k
Dépend: python2.7 | python2.6, python (>= 2.6.6-7~), python (< 2.8) , apt-offline (= 1.2), python-qt4
Description : interface graphique pour le gestionnaire de paquets APT hors ligne
apt-offline est un gestionnaire de paquets APT hors ligne.

apt-offline peut mettre à jour et à niveau une distribution basée sur APT sans être connecté à un réseau, la procédure étant transparente à APT.

apt-offline peut être utilisé pour générer une signature sur une machine (sans connexion réseau). Cette signature comprend toutes les informations nécessaires à la base de
données d’APT. Cette signature peut aussi être utilisée par une autre machine reliée à Internet (elle ne tourne pas forcément sur une Debian et peut tourner sous Windows) afin de
télécharger les mises à jour. Les données téléchargées peuvent contenir toutes les mises à jour dans un format compréhensible par APT et ces données peuvent être utilisées par
apt-offline afin de mettre à jour des machines qui ne sont pas connectées au réseau.

apt-offline peut aller chercher des rapports d’erreur et les rendre disponibles hors ligne.

Ce paquet contient l’interface graphique pour le gestionnaire de paquets apt-offline.
Site : apt-offline.alioth.debian.org

[/quote]

#10

Tu n’as pas de périphérique wifi ou de connexion wifi sur cette machine ?

Car effectivement tu as installé le CD minimal ; netinstall = ne mettre que le strict nécessaire et chopper le reste par internet. Donc aucun environnement graphique fourni avec.

Je connais pas apt-offline mais si ton poste est définitivement coupé du net, ça vaut le coup de s’y intéresser.

#11

Oui, le pc en question est très éloigné du câble ethernet et je ne dispose pas de cle wifi.

Je vais donc étudier vos réponses et tenter de résoudre ainsi à mon problème.

Merci pour vos réponses !!!

#12

Bonsoir,
J’ai fini par opter pour la simplicité …
réparer ma debian grâce au cd d’installation,
mais connectée à internet par un long câble Ethernet.

Je vous remercie pour l’attention que vous avez porté à mon problème.
Très bonne soirée,