- reseau wifi non reconnu (netinstall 7.7.0)

Support Debian
#1

Bonjour,
Je débute sur Debian (et sur linux en général) et je souhaite installer Debian sur un:
Fujitsu Lifebook U554 (proc:inteli5 Carte:intelHDGraphics4400 wifi:Wireless-N7260)

J’utilise une clé USB bootable avec Debian 20 (amd64)

Je suis bloqué dans mon installation car Debian ne reconnait pas mon réseau wifi : impossible de se connecter à internet, comme si mon password était faux.

Du coup impossible de télécharger les paquets qui ne sont pas sur l’iso. je termine l’install avec une version minimale de Debian que je ne sais pas utiliser dans cet état là, car je ne connais aucune ligne de commande.

J’ai re-essayé l’installation en me branchant directement sur le modem en RJ45 mais ça ne change rien l’installateur ne veut rien savoir et me demande toujours le code du wifi, mais n’arrive pas à se connecter. J’ai également tenté une install en recovery mode, en saisissant manuellement l’IPV4 etc, mais là non plus aucune différence.

Si vous voyez une solution, merci par avance de votre aide …
+

#2

Salut,

Dis nous de quelle version et origine est ta Debian d’install.
Il est recommandé d’utiliser la “Netinstall”

PS Le titre de ton post n’est pas aux normes, sans doute as tu lu un peu vite les recommandations de ce forum :slightly_smiling:

#3

Bonjour,
merci de la remarque j’ai modifié le titre.

Concernant la version de Debian j’utilise debian-7.7.0-amd64-i386-netinst.iso

Si j’ai bien compris Net Install fait appel au web pour les paquets manqant, non?
C’est justement mon soucis, puisque visiblement mon réseau wifi n’est pas reconnu …

#4

Bonjour,
de base, debian n’integre aucun logiciel non libre (voir le contrat social). Mais la plupart des cartes wifi ont besoin d’un firmware non libre.
Donc, soit tu prends une version de l’installeur qui intégre ces firmware, soit ut les fourni à l’installeur lors de l’installation.
Regarde cette page du manuel: debian.org/releases/wheezy/ … 02.html.fr

Pour y voir plus clair, il nous faudrait connaitre le type exact du chip wifi de ta machine.
Tu peux l’obtenir en tapant la commande lspci -nn et en cherchant la ligne qui parle de wireless. Tu y trouvera un code composé de 2 chiffres séparé par :
Le premier chiffre correspond au vender (intel, …), le 2eme au modéle exact du chip. Avec ses infos, tu vas sur la base de donnée des pciids, et tu as le modéle exact, ce qui te permet de connaitre le driver et le firmware requis
pci-ids.ucw.cz/read/PC/

#5

piratebab :
Si l’installateur voit les réseaux wifi présents et demande le SSID et la clé du réseau wifi, c’est a priori que la carte wifi est bien reconnue et qu’aucun firmware ou pilote non libre n’est nécessaire.

matiu:
Pour apporter une note d’optimisme, je n’ai jamais réussi à me connecter à un point d’accès depuis l’installateur Debian netinstall, même manuellement via wpa_supplicant (alors que j’y arrive sans problème par ce biais dans le système installé).

Par contre il n’est pas très difficile de configurer le wifi en ligne de commande via /etc/network/interface. Voir https://wiki.debian.org/fr/WiFi/HowToUse#wpa_supplicant

Et si l’installateur ne propose que la connexion wifi lorsque le PC est branché à la box en ethernet, cela peut signifier que l’interface ethernet n’est pas reconnue (et nécessiter un pilote ou firmware manquant). As-tu eu le choix de l’interface réseau, et relancé l’installateur après avoir branché le câble ethernet ?

#6

Pascal, il m’est arrivé d’avoir un réseau qui semblait “presque” fonctionner, mais la connexion n’a finalement fonctionné qu’après installation de bon firmware (chip atheros il me semble). Je ne sais pas quel firmware était chargé par défaut, mais ce n’était pas le bon.

#7

Bonjour,
merci pour toutes ces réponses !

@Pascal : non je n’ai pas eu de choix de l’interface réseau. Et j’ai refait toute l’install avec le câble branché, ça n’a rien changé.

@piratebab :
je ne suis pas sûr d’avoir tout compris.
A vu de nez ce qui me semble étrange, c’est :

  • comment ajouter un driver alors que je suis en cours d’install ?
  • comment taper des commandes alors que je suis en cours d’install ?

Je testerai ce WE et je viendrai vous dire ce que ça donne :slightly_smiling:

merci !

#8

Salut,

L’installeur Debian te demande bien poliment si tu possède un driver à installer et où il se trouve :slightly_smiling:

#9

Avec Alt+F2 ou F3 (ajouter Ctrl si installation en mode graphique) pour basculer sur un des terminaux avec shell.
Alt+F1 pour revenir à l’installateur texte, Alt+F5 ou F6 ou F7 (sais plus) pour l’installateur graphique.

La commande [mono]lspci -nn[/mono] listera les périphériques PCI, ce qui devrait permettre d’identifier la carte ethernet et la carte wifi afin qu’on puisse regarder de quels pilotes et firmwares elles ont besoin.

#10

Bonjour,

merci pour l’astuce du atl+F2

avec la commande

j’ai trouve une ligne indiquant

Network controller [0280] Atheros Communication Inc. AR9462 Wireless Network Adapter [160c:0034] (rev 01)

j’ai fait

et j’ai eu comme réponse:
alias: pci:v0000168Cd00000030svsdbcsci*

mais apres ca je suis coincé puisqu je ne peut pas me connecter au net pour charger un module supplémentaire …

#11

Tu veux dire 168c:0034 ?

Pourquoi “0030” alors que l’identifiant de périphérique de ta carte est “0034” ?
De toute façon c’est le même pilote [mono]ath9k[/mono] qui gère les deux. Et il n’a pas besoin de firmware pour fonctionner d’après [mono]modinfo[/mono].
De toute façon je ne peux pas t’aider là-dessus puisque je n’ai moi-même jamais réussi à utiliser le wifi dans l’installateur Debian avec une carte wifi par ailleurs bien reconnue.

Par contre rien sur la carte ethernet dans la sortie de [mono]lspci -nn[/mono] ?

#12

Bonsoir Pascal,
Alors voilà l’intégralité du résultat de la commande

[quote]00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 09)
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 09)
00:03.0 Audio device [0403]: Intel Corporation Device [8086:0a0c] (rev 09)
00:14.0 USB controller [0c03]: Intel Corporation Lynx Point-LP USB xHCI HC [8086:9c31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation Lynx Point-LP HECI #0 [8086:9c3a] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation Lynx Point-LP HD Audio Controller [8086:9c20] (rev 04)
00:1c.0 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root Port 1 [8086:9c10] (rev e4)
00:1c.3 PCI bridge [0604]: Intel Corporation Lynx Point-LP PCI Express Root Port 4 [8086:9c16] (rev e4)
00:1f.0 ISA bridge [0601]: Intel Corporation Lynx Point-LP LPC Controller [8086:9c43] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation Lynx Point-LP SATA Controller 1 [AHCI mode] [8086:9c03] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation Lynx Point-LP SMBus Controller [8086:9c22] (rev 04)
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9462 Wireless Network Adapter [168c:0034] (rev 01)[/quote]

est-ce que tu y vois plus clair ?

Ceci étant dit j’ai progressé entre temps : j’ai refait une install complète avec une iso du DVD1
J’ai maintenant un système relativement complet, qui se lance avec une interface graphique, c’est déjà super !
J’ai même déjà réglé mon problème numéro 1, la prise en charge du trackpad, et ça marche déjà :wink:

Par contre par de progrès coté internet…

#13

Comme l’a écrit Pascal, tu as le bon driver (refais quand même un lsmod), ce n’est qu’un probléme de configuration.
il va falloir faire un peu de ligne decommande pour voir ou ça bloque.
Commence par un iwconfig -a. Il te faudra peut étre installer le paquet wireless-tools

#14

En vérifiant les caractéristiques de cet appareil, il s’avère qu’il n’a pas de carte ethernet PCI. Sa fiche technique ne parle que d’un adaptateur USB vers LAN. Je ne sais pas si ce dernier est intégré ou externe, mais dans les deux cas la commande à exécuter pour l’identifier est [mono]lsusb[/mono].

Que veux-tu dire par “par de progrès coté internet” ?
Tu parles de la carte wifi ?
Est-elle gérée par le système ?
Voit-elle des réseaux sans fil ?

#15

Pascal, c’est bien une carte pcie: AR9462 2x2 DB 11n PCIe gérée par le ath9K
Je partage ton avis, il faut y aller pas à pas, en commençant par le iwconfig -a

#16

Salut,
alors voilà ce que je vois :

avec lsusb

[quote]Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 003: ID 04f2:b3df Chicony Electronics Co., Ltd
Bus 001 Device 004: ID 04c5:1330 Fujitsu, Ltd[/quote]

avec lsmod

[quote]Module Size Used by
usb_storage 43870 0
bnep 17567 2
parport_pc 22364 0
ppdev 12763 0
lp 17149 0
parport 31858 3 lp,ppdev,parport_pc
rfcomm 33700 0
binfmt_misc 12957 1
uinput 17440 1
nfsd 216181 2
nfs 308353 0
nfs_acl 12511 2 nfs,nfsd
auth_rpcgss 37143 2 nfs,nfsd
fscache 36739 1 nfs
lockd 67306 2 nfs,nfsd
sunrpc 173730 6 lockd,auth_rpcgss,nfs_acl,nfs,nfsd
nls_utf8 12456 1
nls_cp437 16553 1
vfat 17316 1
fat 45642 1 vfat
loop 22641 0
uvcvideo 57744 0
videodev 70889 1 uvcvideo
v4l2_compat_ioctl32 16655 1 videodev
media 18148 2 videodev,uvcvideo
ath3k 12671 0
btusb 17502 0
bluetooth 119455 12 btusb,ath3k,rfcomm,bnep
snd_hda_codec_realtek 188851 1
tpm_infineon 12985 0
arc4 12458 2
ath9k 64619 0
ath9k_common 12728 1 ath9k
ath9k_hw 322112 2 ath9k_common,ath9k
coretemp 12898 0
i2c_i801 16870 0
crc32c_intel 12747 0
ghash_clmulni_intel 13130 0
psmouse 69265 0
ath 21370 3 ath9k_hw,ath9k_common,ath9k
mac80211 192806 1 ath9k
cfg80211 137243 3 mac80211,ath,ath9k
rfkill 19012 5 cfg80211,bluetooth
serio_raw 12931 0
pcspkr 12579 0
evdev 17562 18
i2c_core 23876 2 i2c_i801,videodev
snd_hda_intel 26259 2
snd_hda_codec 78031 2 snd_hda_intel,snd_hda_codec_realtek
snd_hwdep 13186 1 snd_hda_codec
snd_pcm 68083 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 13003 2 snd_pcm,snd_hda_intel
snd_seq 45126 0
aesni_intel 50667 0
snd_seq_device 13176 1 snd_seq
aes_x86_64 16843 1 aesni_intel
snd_timer 22917 2 snd_seq,snd_pcm
snd 52893 12 snd_timer,snd_seq_device,snd_seq,snd_pcm,snd_hwdep,snd_hda_codec,snd_hda_intel,snd_hda_codec_realtek
aes_generic 33026 2 aes_x86_64,aesni_intel
cryptd 14517 2 aesni_intel,ghash_clmulni_intel
battery 13146 0
tpm_tis 17502 0
acpi_cpufreq 12935 0
tpm 17862 2 tpm_tis,tpm_infineon
mperf 12453 1 acpi_cpufreq
tpm_bios 12948 1 tpm
efivars 17916 0
fujitsu_laptop 13730 0
soundcore 13065 1 snd
video 17683 0
ac 12624 0
button 12937 0
power_supply 13475 2 ac,battery
processor 28149 5 acpi_cpufreq
ext4 350763 2
crc16 12343 2 ext4,bluetooth
jbd2 62115 1 ext4
mbcache 13114 1 ext4
sg 25874 0
sd_mod 36136 5
crc_t10dif 12348 1 sd_mod
thermal 17383 0
thermal_sys 18040 3 thermal,processor,video
ahci 24997 4
libahci 22941 1 ahci
libata 140630 2 libahci,ahci
xhci_hcd 73413 0
scsi_mod 162321 4 libata,sd_mod,sg,usb_storage
usbcore 128741 6 xhci_hcd,btusb,ath3k,uvcvideo,usb_storage
usb_common 12354 1 usbcore[/quote]

par contre je suis désolé, mais à iwconfig -a
j’ai comme réponse "commande introuvable"
il y a un truc que j’ai mal fait ?

#17

tu n’as pas installé le paquet wireless-tools
tu peux aussi regarder la sortie de dmesg pour voir si tout se passe bien au démarrage. Le module ath9K est en tout cas bien chargé

#18

En regardant dans Synaptic je vois que j’ai déjà Wireless-tools 30-pre9-8

et dmesg donne

[ 0.692326] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.692329] pnp 00:00: [io 0x0d00-0xffff window] [ 0.692332] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.692335] pnp 00:00: [mem 0x000c0000-0x000c3fff window] [ 0.692337] pnp 00:00: [mem 0x000c4000-0x000c7fff window] [ 0.692339] pnp 00:00: [mem 0x000c8000-0x000cbfff window] [ 0.692341] pnp 00:00: [mem 0x000cc000-0x000cffff window] [ 0.692344] pnp 00:00: [mem 0x000d0000-0x000d3fff window] [ 0.692346] pnp 00:00: [mem 0x000d4000-0x000d7fff window] [ 0.692348] pnp 00:00: [mem 0x000d8000-0x000dbfff window] [ 0.692351] pnp 00:00: [mem 0x000dc000-0x000dffff window] [ 0.692353] pnp 00:00: [mem 0x000e0000-0x000e3fff window] [ 0.692355] pnp 00:00: [mem 0x000e4000-0x000e7fff window] [ 0.692358] pnp 00:00: [mem 0x000e8000-0x000ebfff window] [ 0.692360] pnp 00:00: [mem 0x000ec000-0x000effff window] [ 0.692362] pnp 00:00: [mem 0x000f0000-0x000fffff window] [ 0.692364] pnp 00:00: [mem 0xdfa00000-0xfeafffff window] [ 0.692367] pnp 00:00: [mem 0xff700100-0xff7001ff window] [ 0.692433] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.692624] pnp 00:01: [io 0x0000-0x001f] [ 0.692627] pnp 00:01: [io 0x0081-0x0091] [ 0.692629] pnp 00:01: [io 0x0093-0x009f] [ 0.692631] pnp 00:01: [io 0x00c0-0x00df] [ 0.692634] pnp 00:01: [dma 4] [ 0.692664] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.692675] pnp 00:02: [mem 0xff000000-0xffffffff] [ 0.692700] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) [ 0.692806] pnp 00:03: [mem 0xfed00000-0xfed003ff] [ 0.692835] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.692849] pnp 00:04: [io 0x002e-0x002f] [ 0.692851] pnp 00:04: [io 0x004e-0x004f] [ 0.692853] pnp 00:04: [io 0x0061] [ 0.692855] pnp 00:04: [io 0x0063] [ 0.692857] pnp 00:04: [io 0x0065] [ 0.692859] pnp 00:04: [io 0x0067] [ 0.692861] pnp 00:04: [io 0x0070] [ 0.692863] pnp 00:04: [io 0x0080] [ 0.692865] pnp 00:04: [io 0x0092] [ 0.692867] pnp 00:04: [io 0x00b2-0x00b3] [ 0.692869] pnp 00:04: [io 0x0680-0x069f] [ 0.692871] pnp 00:04: [io 0xffff] [ 0.692873] pnp 00:04: [io 0xffff] [ 0.692875] pnp 00:04: [io 0xffff] [ 0.692877] pnp 00:04: [io 0x1800-0x18fe] [ 0.692879] pnp 00:04: [io 0x164e-0x164f] [ 0.692924] system 00:04: [io 0x0680-0x069f] has been reserved [ 0.692927] system 00:04: [io 0xffff] has been reserved [ 0.692930] system 00:04: [io 0xffff] has been reserved [ 0.692933] system 00:04: [io 0xffff] has been reserved [ 0.692935] system 00:04: [io 0x1800-0x18fe] has been reserved [ 0.692938] system 00:04: [io 0x164e-0x164f] has been reserved [ 0.692941] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.692974] pnp 00:05: [io 0x0070-0x0077] [ 0.692982] pnp 00:05: [irq 8] [ 0.693013] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.693045] pnp 00:06: [io 0x1854-0x1857] [ 0.693086] system 00:06: [io 0x1854-0x1857] has been reserved [ 0.693089] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active) [ 0.693105] pnp 00:07: [io 0x0060] [ 0.693108] pnp 00:07: [io 0x0064] [ 0.693113] pnp 00:07: [irq 1] [ 0.693144] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.693163] pnp 00:08: [irq 12] [ 0.693193] pnp 00:08: Plug and Play ACPI device, IDs ALP0408 PNP0f13 (active) [ 0.693330] pnp 00:09: [mem 0xfed1c000-0xfed1ffff] [ 0.693332] pnp 00:09: [mem 0xfed10000-0xfed17fff] [ 0.693334] pnp 00:09: [mem 0xfed18000-0xfed18fff] [ 0.693336] pnp 00:09: [mem 0xfed19000-0xfed19fff] [ 0.693339] pnp 00:09: [mem 0xf8000000-0xfbffffff] [ 0.693341] pnp 00:09: [mem 0xfed20000-0xfed3ffff] [ 0.693343] pnp 00:09: [mem 0xfed90000-0xfed93fff] [ 0.693345] pnp 00:09: [mem 0xfed45000-0xfed8ffff] [ 0.693347] pnp 00:09: [mem 0xff000000-0xffffffff] [ 0.693349] pnp 00:09: [mem 0xfee00000-0xfeefffff] [ 0.693352] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.693354] pnp 00:09: [mem 0xdfa10000-0xdfa1ffff] [ 0.693400] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.693403] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.693406] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.693409] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.693413] system 00:09: [mem 0xf8000000-0xfbffffff] could not be reserved [ 0.693416] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.693419] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.693421] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved [ 0.693425] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved [ 0.693428] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.693431] system 00:09: [mem 0xdfa10000-0xdfa1ffff] has been reserved [ 0.693434] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.694293] pnp 00:0a: [mem 0xfed40000-0xfed44fff] [ 0.694354] pnp 00:0a: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active) [ 0.694409] pnp: PnP ACPI: found 11 devices [ 0.694411] ACPI: ACPI bus type pnp unregistered [ 0.701098] pci 0000:02:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref] [ 0.701103] PCI: max bus depth: 1 pci_try_num: 2 [ 0.701124] pci 0000:00:1c.3: BAR 15: assigned [mem 0xdfb00000-0xdfbfffff pref] [ 0.701128] pci 0000:00:1c.0: PCI bridge to [bus 01-01] [ 0.701140] pci 0000:02:00.0: BAR 6: assigned [mem 0xdfb00000-0xdfb0ffff pref] [ 0.701143] pci 0000:00:1c.3: PCI bridge to [bus 02-02] [ 0.701148] pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf04fffff] [ 0.701152] pci 0000:00:1c.3: bridge window [mem 0xdfb00000-0xdfbfffff pref] [ 0.701175] pci 0000:00:1c.0: setting latency timer to 64 [ 0.701188] pci 0000:00:1c.3: setting latency timer to 64 [ 0.701192] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.701195] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.701197] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.701200] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff] [ 0.701202] pci_bus 0000:00: resource 8 [mem 0xff700100-0xff7001ff] [ 0.701205] pci_bus 0000:02: resource 1 [mem 0xf0400000-0xf04fffff] [ 0.701207] pci_bus 0000:02: resource 2 [mem 0xdfb00000-0xdfbfffff pref] [ 0.701288] NET: Registered protocol family 2 [ 0.704062] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.704987] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.706681] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.706890] TCP: Hash tables configured (established 524288 bind 65536) [ 0.706893] TCP reno registered [ 0.706907] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.706928] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.707059] NET: Registered protocol family 1 [ 0.707074] pci 0000:00:02.0: Boot video device [ 0.708013] pci 0000:00:14.0: power state changed by ACPI to D0 [ 0.708020] pci 0000:00:14.0: power state changed by ACPI to D0 [ 0.708027] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.708029] pci 0000:00:14.0: PCI INT A: no GSI [ 0.708074] pci 0000:00:14.0: can't derive routing for PCI INT A [ 0.708100] PCI: CLS 64 bytes, default 64 [ 0.708153] Unpacking initramfs... [ 1.003709] Freeing initrd memory: 10248k freed [ 1.005187] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.005192] Placing 64MB software IO TLB between ffff8800c4224000 - ffff8800c8224000 [ 1.005195] software IO TLB at phys 0xc4224000 - 0xc8224000 [ 1.005810] audit: initializing netlink socket (disabled) [ 1.005824] type=2000 audit(1418408513.824:1): initialized [ 1.026336] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.026962] VFS: Disk quotas dquot_6.5.2 [ 1.026997] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.027075] msgmni has been set to 7737 [ 1.027242] alg: No test for stdrng (krng) [ 1.027276] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.027280] io scheduler noop registered [ 1.027281] io scheduler deadline registered [ 1.027306] io scheduler cfq registered (default) [ 1.027480] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.027504] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 1.027506] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 1.028197] efifb: probing for efifb [ 1.028593] efifb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 4160k, total 4160k [ 1.028596] efifb: mode is 1366x768x32, linelength=5504, pages=1 [ 1.028598] efifb: scrolling: redraw [ 1.028600] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0 [ 1.032574] Console: switching to colour frame buffer device 170x48 [ 1.036410] fb0: EFI VGA frame buffer device [ 1.036418] intel_idle: does not run on family 6 model 69 [ 1.036446] ERST: Table is not found! [ 1.036448] GHES: HEST is not enabled! [ 1.036500] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.198045] Linux agpgart interface v0.103 [ 1.198190] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 1.200229] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.200236] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.200357] mousedev: PS/2 mouse device common for all mice [ 1.200398] rtc_cmos 00:05: RTC can wake from S4 [ 1.200518] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 [ 1.200546] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs [ 1.200557] cpuidle: using governor ladder [ 1.200560] cpuidle: using governor menu [ 1.200757] TCP cubic registered [ 1.200828] NET: Registered protocol family 10 [ 1.201311] Mobile IPv6 [ 1.201313] NET: Registered protocol family 17 [ 1.201317] Registering the dns_resolver key type [ 1.201433] PM: Hibernation image not present or could not be loaded. [ 1.201444] registered taskstats version 1 [ 1.201935] rtc_cmos 00:05: setting system clock to 2014-12-12 18:21:54 UTC (1418408514) [ 1.202005] Initializing network drop monitor service [ 1.203447] Freeing unused kernel memory: 580k freed [ 1.203536] Write protecting the kernel read-only data: 6144k [ 1.206582] Freeing unused kernel memory: 648k freed [ 1.209808] Freeing unused kernel memory: 688k freed [ 1.210461] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.221856] udevd[57]: starting version 175 [ 1.252302] usbcore: registered new interface driver usbfs [ 1.252339] usbcore: registered new interface driver hub [ 1.258369] SCSI subsystem initialized [ 1.258512] usbcore: registered new device driver usb [ 1.259488] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 [ 1.259497] xhci_hcd 0000:00:14.0: power state changed by ACPI to D0 [ 1.259505] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A [ 1.259508] xhci_hcd 0000:00:14.0: PCI INT A: no GSI [ 1.259549] xhci_hcd 0000:00:14.0: setting latency timer to 64 [ 1.259555] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.259897] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1 [ 1.260186] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported [ 1.260238] xhci_hcd 0000:00:14.0: irq 56 for MSI/MSI-X [ 1.260310] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.260315] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.260319] usb usb1: Product: xHCI Host Controller [ 1.260322] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd [ 1.260326] usb usb1: SerialNumber: 0000:00:14.0 [ 1.260469] xHCI xhci_add_endpoint called for root hub [ 1.260473] xHCI xhci_check_bandwidth called for root hub [ 1.260526] hub 1-0:1.0: USB hub found [ 1.260539] hub 1-0:1.0: 9 ports detected [ 1.260652] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 1.260663] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2 [ 1.260691] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003 [ 1.260695] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.260699] usb usb2: Product: xHCI Host Controller [ 1.260702] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd [ 1.260705] usb usb2: SerialNumber: 0000:00:14.0 [ 1.260838] xHCI xhci_add_endpoint called for root hub [ 1.260841] xHCI xhci_check_bandwidth called for root hub [ 1.260894] hub 2-0:1.0: USB hub found [ 1.260904] hub 2-0:1.0: 4 ports detected [ 1.261556] libata version 3.00 loaded. [ 1.266977] ACPI: Invalid active0 threshold [ 1.267461] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.267466] ACPI: Thermal Zone [TZ00] (0 C) [ 1.269948] thermal LNXTHERM:01: registered as thermal_zone1 [ 1.269954] ACPI: Thermal Zone [TZ01] (0 C) [ 1.281676] ahci 0000:00:1f.2: version 3.0 [ 1.281774] ahci 0000:00:1f.2: irq 57 for MSI/MSI-X [ 1.297524] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode [ 1.297530] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part apst [ 1.297535] ahci 0000:00:1f.2: setting latency timer to 64 [ 1.298122] scsi0 : ahci [ 1.298254] scsi1 : ahci [ 1.298332] scsi2 : ahci [ 1.298403] scsi3 : ahci [ 1.298665] ata1: SATA max UDMA/133 abar m2048@0xf0518000 port 0xf0518100 irq 57 [ 1.298668] ata2: DUMMY [ 1.298669] ata3: DUMMY [ 1.298671] ata4: DUMMY [ 1.569366] usb 1-2: new high-speed USB device number 2 using xhci_hcd [ 1.617344] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 1.673130] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.673135] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.673425] ata1.00: ATA-9: ST500UM001-1EK162, SP13, max UDMA/133 [ 1.673428] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.717424] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 1.717428] ata1.00: ACPI cmd b1/c1:00:00:00:00:a0 (DEVICE CONFIGURATION OVERLAY) filtered out [ 1.717716] ata1.00: configured for UDMA/133 [ 1.717849] scsi 0:0:0:0: Direct-Access ATA ST500UM001-1EK16 SP13 PQ: 0 ANSI: 5 [ 1.721466] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 1.721471] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.721514] sd 0:0:0:0: [sda] Write Protect is off [ 1.721519] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.721543] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.724581] sda: sda1 sda2 sda3 sda4 [ 1.724909] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.726637] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.001135] Refined TSC clocksource calibration: 2294.688 MHz. [ 2.001141] Switching to clocksource tsc [ 2.410806] PM: Starting manual resume from disk [ 2.410811] PM: Hibernation image partition 8:3 present [ 2.410813] PM: Looking for hibernation image. [ 2.411099] PM: Image not found (code -22) [ 2.411103] PM: Hibernation image not present or could not be loaded. [ 2.427082] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.846545] udevd[344]: starting version 175 [ 3.143977] ACPI: Requesting acpi_cpufreq [ 3.156378] Monitor-Mwait will be used to enter C-1 state [ 3.156391] Monitor-Mwait will be used to enter C-2 state [ 3.156402] ACPI: acpi_idle registered with cpuidle [ 3.158355] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1 [ 3.169781] input: Fujitsu FUJ02B1 as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/FUJ02B1:00/input/input2 [ 3.169795] fujitsu_laptop: ACPI: Fujitsu FUJ02B1 [FJEX] (on) [ 3.185961] EFI Variables Facility v0.08 2004-May-17 [ 3.187811] tpm_tis 00:0a: 1.2 TPM (device-id 0xB, rev-id 16) [ 3.189933] ACPI: Lid Switch [LID0] [ 3.190075] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 3.190084] ACPI: Power Button [PWRB] [ 3.190168] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 3.190174] ACPI: Power Button [PWRF] [ 3.205294] ACPI: AC Adapter [ADP1] (on-line) [ 3.205404] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/FUJ02E3:00/input/input5 [ 3.205415] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on) [ 3.206607] ACPI: Battery Slot [BAT1] (battery present) [ 3.214420] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 3.226270] fujitsu_laptop: BTNI: [0x80001] [ 3.226654] fujitsu_laptop: driver 0.6.0 successfully loaded [ 3.229043] snd_hda_intel 0000:00:03.0: irq 58 for MSI/MSI-X [ 3.229061] snd_hda_intel 0000:00:03.0: setting latency timer to 64 [ 3.233128] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 3.239186] cfg80211: Calling CRDA to update world regulatory domain [ 3.279416] ath9k 0000:02:00.0: setting latency timer to 64 [ 3.288107] ath: EEPROM regdomain: 0x6a [ 3.288109] ath: EEPROM indicates we should expect a direct regpair map [ 3.288111] ath: Country alpha2 being used: 00 [ 3.288112] ath: Regpair used: 0x6a [ 3.301744] cfg80211: World regulatory domain updated: [ 3.301747] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 3.301751] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3.301754] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 3.301756] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm) [ 3.301758] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 3.301761] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 3.301763] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm) [ 3.301765] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm) [ 3.301768] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm) [ 3.305546] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 3.306046] Registered led device: ath9k-phy0 [ 3.306057] ieee80211 phy0: Atheros AR9462 Rev:3 mem=0xffffc90005580000, irq=19 [ 4.148673] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input7 [ 6.254855] hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x000f0000 [ 6.614708] usb 1-2: unable to read config index 0 descriptor/start: -110 [ 6.614799] usb 1-2: chopping to 0 config(s) [ 7.258295] hda-intel: No response from codec, disabling MSI: last cmd=0x000f0000 [ 8.261736] hda-intel: Codec #0 probe error; disabling it... [ 9.281170] hda_intel: azx_get_response timeout, switching to single_cmd mode: last cmd=0x000f0001 [ 9.286624] snd_hda_intel 0000:00:1b.0: irq 58 for MSI/MSI-X [ 9.286693] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 [ 9.431763] hda_codec: ALC283: SKU not ready 0x909701f0 [ 9.433297] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8 [ 9.434952] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9 [ 9.435035] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10 [ 9.435251] ACPI: resource 0000:00:1f.3 [io 0xefa0-0xefbf] conflicts with ACPI region SMBI [io 0xefa0-0xefaf] [ 9.435257] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 16.609152] usb 1-2: string descriptor 0 read error: -110 [ 16.609235] usb 1-2: New USB device found, idVendor=0b95, idProduct=1790 [ 16.609242] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 16.609475] usb 1-2: no configuration chosen from 0 choices [ 16.721048] usb 1-5: new high-speed USB device number 3 using xhci_hcd [ 16.822404] usb 1-5: New USB device found, idVendor=04f2, idProduct=b3df [ 16.822413] usb 1-5: New USB device strings: Mfr=2, Product=1, SerialNumber=0 [ 16.822418] usb 1-5: Product: FJ Camera [ 16.822422] usb 1-5: Manufacturer: Chicony Electronics Co.,Ltd. [ 16.992888] usb 1-7: new full-speed USB device number 4 using xhci_hcd [ 17.010077] usb 1-7: New USB device found, idVendor=04c5, idProduct=1330 [ 17.010087] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 17.050957] Bluetooth: Core ver 2.16 [ 17.050978] NET: Registered protocol family 31 [ 17.050981] Bluetooth: HCI device and connection manager initialized [ 17.050984] Bluetooth: HCI socket layer initialized [ 17.050986] Bluetooth: L2CAP socket layer initialized [ 17.050995] Bluetooth: SCO socket layer initialized [ 17.071460] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 17.071516] usbcore: registered new interface driver btusb [ 17.072046] Bluetooth: Atheros AR30xx firmware driver ver 1.0 [ 17.088827] Linux media interface: v0.10 [ 17.091515] Linux video capture interface: v2.00 [ 17.093228] uvcvideo: Found UVC 1.00 device FJ Camera (04f2:b3df) [ 17.107349] usb 1-7: firmware: agent aborted loading ar3k/AthrBT_0x11020100.dfu (not found?) [ 17.107462] Bluetooth: Loading patch file failed [ 17.107499] ath3k: probe of 1-7:1.0 failed with error -2 [ 17.107527] usbcore: registered new interface driver ath3k [ 17.127381] input: FJ Camera as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input11 [ 17.127554] usbcore: registered new interface driver uvcvideo [ 17.127558] USB Video Class driver (1.1.1) [ 18.514105] Adding 8193020k swap on /dev/sda3. Priority:-1 extents:1 across:8193020k [ 18.527528] EXT4-fs (sda2): re-mounted. Opts: (null) [ 18.633687] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro [ 18.664029] loop: module loaded [ 19.269537] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 19.311332] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 19.786174] RPC: Registered named UNIX socket transport module. [ 19.786179] RPC: Registered udp transport module. [ 19.786182] RPC: Registered tcp transport module. [ 19.786184] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 19.792966] FS-Cache: Loaded [ 19.806339] FS-Cache: Netfs 'nfs' registered for caching [ 19.812422] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 20.883332] Bluetooth: RFCOMM TTY layer initialized [ 20.883339] Bluetooth: RFCOMM socket layer initialized [ 20.883342] Bluetooth: RFCOMM ver 1.11 [ 20.995032] lp: driver loaded but no devices found [ 21.001657] ppdev: user-space parallel port driver [ 21.075318] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 21.075321] Bluetooth: BNEP filters: protocol multicast [ 21.256714] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.307602] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12 [ 1075.680106] usb 1-1: new high-speed USB device number 5 using xhci_hcd [ 1075.702684] usb 1-1: New USB device found, idVendor=13fe, idProduct=4100 [ 1075.702693] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1075.702698] usb 1-1: Product: [ 1075.702702] usb 1-1: Manufacturer: [ 1075.702706] usb 1-1: SerialNumber: 25DE1F43425406D25DF82193 [ 1075.745934] Initializing USB Mass Storage driver... [ 1075.746056] scsi4 : usb-storage 1-1:1.0 [ 1075.746149] usbcore: registered new interface driver usb-storage [ 1075.746151] USB Mass Storage support registered. [ 1076.745997] scsi 4:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 6 [ 1076.747462] sd 4:0:0:0: Attached scsi generic sg1 type 0 [ 1078.044720] sd 4:0:0:0: [sdb] 15648759 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1078.045009] sd 4:0:0:0: [sdb] Write Protect is off [ 1078.045014] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 1078.045338] sd 4:0:0:0: [sdb] No Caching mode page found [ 1078.045342] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1078.048595] sd 4:0:0:0: [sdb] No Caching mode page found [ 1078.048604] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1078.058868] sdb: sdb1 [ 1078.060958] sd 4:0:0:0: [sdb] No Caching mode page found [ 1078.060968] sd 4:0:0:0: [sdb] Assuming drive cache: write through [ 1078.060974] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 1095.922841] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 1138.722417] sdb: detected capacity change from 8012164608 to 0 [ 1142.298865] usb 1-1: USB disconnect, device number 5 [ 1717.021278] usb 1-2: USB disconnect, device number 2 [ 9190.435013] usb 1-1: new high-speed USB device number 6 using xhci_hcd [ 9190.457646] usb 1-1: New USB device found, idVendor=13fe, idProduct=4100 [ 9190.457655] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9190.457661] usb 1-1: Product: [ 9190.457665] usb 1-1: Manufacturer: [ 9190.457669] usb 1-1: SerialNumber: 25DE1F43425406D25DF82193 [ 9190.458523] scsi5 : usb-storage 1-1:1.0 [ 9191.456941] scsi 5:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 6 [ 9191.459562] sd 5:0:0:0: Attached scsi generic sg1 type 0 [ 9192.832347] sd 5:0:0:0: [sdb] 15648759 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 9192.832680] sd 5:0:0:0: [sdb] Write Protect is off [ 9192.832689] sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 9192.832968] sd 5:0:0:0: [sdb] No Caching mode page found [ 9192.832977] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 9192.836721] sd 5:0:0:0: [sdb] No Caching mode page found [ 9192.836731] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 9192.846990] sdb: sdb1 [ 9192.848728] sd 5:0:0:0: [sdb] No Caching mode page found [ 9192.848731] sd 5:0:0:0: [sdb] Assuming drive cache: write through [ 9192.848733] sd 5:0:0:0: [sdb] Attached SCSI removable disk [ 9332.656888] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 9350.654270] sdb: detected capacity change from 8012164608 to 0 [ 9356.487696] usb 1-1: USB disconnect, device number 6 [ 9949.692745] usb 1-1: new high-speed USB device number 7 using xhci_hcd [ 9949.715388] usb 1-1: New USB device found, idVendor=13fe, idProduct=4100 [ 9949.715398] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 9949.715403] usb 1-1: Product: [ 9949.715408] usb 1-1: Manufacturer: [ 9949.715412] usb 1-1: SerialNumber: 25DE1F43425406D25DF82193 [ 9949.716294] scsi6 : usb-storage 1-1:1.0 [ 9950.714729] scsi 6:0:0:0: Direct-Access PMAP PQ: 0 ANSI: 6 [ 9950.716760] sd 6:0:0:0: Attached scsi generic sg1 type 0 [ 9952.076309] sd 6:0:0:0: [sdb] 15648759 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 9952.076662] sd 6:0:0:0: [sdb] Write Protect is off [ 9952.076672] sd 6:0:0:0: [sdb] Mode Sense: 23 00 00 00 [ 9952.077012] sd 6:0:0:0: [sdb] No Caching mode page found [ 9952.077021] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 9952.080672] sd 6:0:0:0: [sdb] No Caching mode page found [ 9952.080681] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 9952.091043] sdb: sdb1 [ 9952.092909] sd 6:0:0:0: [sdb] No Caching mode page found [ 9952.092918] sd 6:0:0:0: [sdb] Assuming drive cache: write through [ 9952.092924] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 9961.485826] FAT-fs (sdb1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!

#19

Je parlais de l’interface ethernet mentionnée par matiu (connexion RJ45).
Cette connexion était-elle branchée lors de l’exécution de [mono]lsusb[/mono] ?
Il y a deux périphériques non identifiés dans la base de données de lsusb, le Chicony est probablement un clavier, un pad ou une webcam. [mono]lsusb -v[/mono] en dira peut-être plus sur le type de ces périphériques.

#20

Alors,
lsusb -v
donne

[code] bAspectRatioY 0
bmInterlaceFlags 0x00
Interlaced stream or variable: No
Fields per frame: 1 fields
Field 1 first: No
Field pattern: Field 1 only
bCopyProtect 0
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 1
bmCapabilities 0x00
Still image unsupported
wWidth 640
wHeight 480
dwMinBitRate 73798680
dwMaxBitRate 147597360
dwMaxVideoFrameBufferSize 614989
dwDefaultFrameInterval 333333
bFrameIntervalType 2
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 2
bmCapabilities 0x00
Still image unsupported
wWidth 640
wHeight 360
dwMinBitRate 55366680
dwMaxBitRate 110733360
dwMaxVideoFrameBufferSize 461389
dwDefaultFrameInterval 333333
bFrameIntervalType 2
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 3
bmCapabilities 0x00
Still image unsupported
wWidth 352
wHeight 288
dwMinBitRate 24400920
dwMaxBitRate 48801840
dwMaxVideoFrameBufferSize 203341
dwDefaultFrameInterval 333333
bFrameIntervalType 2
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 4
bmCapabilities 0x00
Still image unsupported
wWidth 320
wHeight 240
dwMinBitRate 18502680
dwMaxBitRate 37005360
dwMaxVideoFrameBufferSize 154189
dwDefaultFrameInterval 333333
bFrameIntervalType 2
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 5
bmCapabilities 0x00
Still image unsupported
wWidth 320
wHeight 180
dwMinBitRate 13894680
dwMaxBitRate 27789360
dwMaxVideoFrameBufferSize 115789
dwDefaultFrameInterval 333333
bFrameIntervalType 2
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 6
bmCapabilities 0x00
Still image unsupported
wWidth 176
wHeight 144
dwMinBitRate 6153240
dwMaxBitRate 12306480
dwMaxVideoFrameBufferSize 51277
dwDefaultFrameInterval 333333
bFrameIntervalType 2
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 7
bmCapabilities 0x00
Still image unsupported
wWidth 160
wHeight 120
dwMinBitRate 4678680
dwMaxBitRate 9357360
dwMaxVideoFrameBufferSize 38989
dwDefaultFrameInterval 333333
bFrameIntervalType 2
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
VideoStreaming Interface Descriptor:
bLength 34
bDescriptorType 36
bDescriptorSubtype 7 (FRAME_MJPEG)
bFrameIndex 8
bmCapabilities 0x00
Still image unsupported
wWidth 1280
wHeight 720
dwMinBitRate 221254680
dwMaxBitRate 442509360
dwMaxVideoFrameBufferSize 1843789
dwDefaultFrameInterval 333333
bFrameIntervalType 2
dwFrameInterval( 0) 333333
dwFrameInterval( 1) 666666
VideoStreaming Interface Descriptor:
bLength 6
bDescriptorType 36
bDescriptorSubtype 13 (COLORFORMAT)
bColorPrimaries 1 (BT.709,sRGB)
bTransferCharacteristics 1 (BT.709)
bMatrixCoefficients 4 (SMPTE 170M (BT.601))
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0080 1x 128 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0100 1x 256 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0320 1x 800 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x0b20 2x 800 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1320 3x 800 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 6
bNumEndpoints 1
bInterfaceClass 14 Video
bInterfaceSubClass 2 Video Streaming
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x1400 3x 1024 bytes
bInterval 1

Bus 001 Device 004: ID 04c5:1330 Fujitsu, Ltd
Couldn’t open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x04c5 Fujitsu, Ltd
idProduct 0x1330
bcdDevice 0.01
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 177
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
[/code]