[RESOLU] Install 5.0 = écran 1900x1200, 1er reboot = écran 8

[Eric75]

Bonjour à tous,

Après une install d’une Lenny 5.0.0 sans aucun souci sur un PC de récup, par défaut la première fois que je me suis logué, la page de login et mon bureau s’affichait en 1900x1200.
Suite au premier reboot, la page de login et mon bureau ne peuvent maintenant plus s’afficher qu’en 800x600 (C’est balo sur un Dell 24" !!!)
L’install ayant été faite par défaut, c’est Gnome que j’utilisais…
J’ai donc refais une nouvelle install (en écrasant la précédente) avec KDE cette fois mais le problème est exactement le même !!!

Après avoir parcouru ce forum, il semblerait que ce pb de 800x600 soit fréquent, mais pour les carte ATI & Nvidia…
Or ce n’est à priori pas ce que j’ai comme carte :

[code]lspci

00:00.0 Host bridge: Intel Corporation 82810E DC-133 (GMCH) Graphics Memory Controller Hub (rev 03)
00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02)
00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801AA IDE Controller (rev 02)
00:1f.2 USB Controller: Intel Corporation 82801AA USB Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801AA SMBus Controller (rev 02)
01:00.0 Multimedia audio controller: Creative Labs SB Live! EMU10k1 (rev 05)
01:00.1 Input device controller: Creative Labs SB Live! Game Port (rev 05)
01:01.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)[/code]

[code]cat /var/log/Xorg.0.log

X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10)
Current Operating System: Linux unixsys 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686
Build Date: 09 January 2009 02:57:16AM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.

Module Loader present
Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Thu Feb 19 16:52:47 2009
(==) Using config file: “/etc/X11/xorg.conf”
(==) No Layout section. Using the first Screen section.
() |–>Screen “Default Screen” (0)
() | |–>Monitor “Configured Monitor”
(==) No device specified for screen “Default Screen”.
Using the first device section listed.
() | |–>Device “Configured Video Device”
(==) |–>Input Device “Configured Mouse”
(==) |–>Input Device “Generic Keyboard”
(==) The core pointer device wasn’t specified explicitly in the layout.
Using the first mouse device.
(==) The core keyboard device wasn’t specified explicitly in the layout.
Using the first keyboard device.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
Entry deleted from font path.
(WW) The directory “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType” does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi
(==) RgbPath set to “/etc/X11/rgb”
(==) ModulePath set to “/usr/lib/xorg/modules”
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81e38c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: “pcidata”
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7124 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7125 card 1014,01e1 rev 03 class 03,00,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1102,0002 card 1102,0020 rev 05 class 04,01,00 hdr 80
(II) PCI: 01:00:1: chip 1102,7002 card 1102,0020 rev 05 class 09,80,00 hdr 80
(II) PCI: 01:01:0: chip 10b7,9055 card 10b7,9055 rev 30 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x00007000 - 0x00007fff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfeb00000 - 0xfebfffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(–) PCI:*(0:1:0) Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller rev 3, Mem @ 0xf8000000/26, 0xfea80000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xfebfff80 - 0xfebfffff (0x80) MX[B]
[1] -1 0 0xfea80000 - 0xfeafffff (0x80000) MXB
[2] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MXB
[3] -1 0 0x00007880 - 0x000078ff (0x80) IX[B]
[4] -1 0 0x00007858 - 0x0000785f (0x8) IX[B]
[5] -1 0 0x00007860 - 0x0000787f (0x20) IX[B]
[6] -1 0 0x0000fe00 - 0x0000fe0f (0x10) IX[B]
[7] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[8] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfebfff80 - 0xfebfffff (0x80) MX[B]
[1] -1 0 0xfea80000 - 0xfeafffff (0x80000) MXB
[2] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MXB
[3] -1 0 0x00007880 - 0x000078ff (0x80) IX[B]
[4] -1 0 0x00007858 - 0x0000785f (0x8) IX[B]
[5] -1 0 0x00007860 - 0x0000787f (0x20) IX[B]
[6] -1 0 0x0000fe00 - 0x0000fe0f (0x10) IX[B]
[7] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[8] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebfff80 - 0xfebfffff (0x80) MX[B]
[5] -1 0 0xfea80000 - 0xfeafffff (0x80000) MXB
[6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MXB
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0 0x00007880 - 0x000078ff (0x80) IX[B]
[10] -1 0 0x00007858 - 0x0000785f (0x8) IX[B]
[11] -1 0 0x00007860 - 0x0000787f (0x20) IX[B]
[12] -1 0 0x0000fe00 - 0x0000fe0f (0x10) IX[B]
[13] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[14] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]
(II) LoadModule: “extmod”
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “dbe”
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: “glx”
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: “freetype”
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: “record”
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: “dri”
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) Matched intel from file name intel.ids in autoconfig
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: “intel”
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: “mouse”
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: “kbd”
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00:01:0
(–) Assigning device section with no busID to primary device
(–) Chipset i810e found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebfff80 - 0xfebfffff (0x80) MX[B]
[5] -1 0 0xfea80000 - 0xfeafffff (0x80000) MXB
[6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MXB
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0 0x00007880 - 0x000078ff (0x80) IX[B]
[10] -1 0 0x00007858 - 0x0000785f (0x8) IX[B]
[11] -1 0 0x00007860 - 0x0000787f (0x20) IX[B]
[12] -1 0 0x0000fe00 - 0x0000fe0f (0x10) IX[B]
[13] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[14] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebfff80 - 0xfebfffff (0x80) MX[B]
[5] -1 0 0xfea80000 - 0xfeafffff (0x80000) MXB
[6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MXB
[7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x00007880 - 0x000078ff (0x80) IX[B]
[13] -1 0 0x00007858 - 0x0000785f (0x8) IX[B]
[14] -1 0 0x00007860 - 0x0000787f (0x20) IX[B]
[15] -1 0 0x0000fe00 - 0x0000fe0f (0x10) IX[B]
[16] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[17] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]
[18] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[19] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module “vgahw”
(II) LoadModule: “vgahw”
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor=“X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen” for depth/fbbpp 16/16
(==) intel(0): Depth 16, (==) framebuffer bpp 16
(==) intel(0): RGB weight 565
(==) intel(0): Default visual is TrueColor
(II) Loading sub module “xaa”
(II) LoadModule: “xaa”
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module “vbe”
(II) LoadModule: “vbe”
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module “int10”
(II) LoadModule: “int10”
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): initializing int10
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 2.0
(II) intel(0): VESA VBE Total Mem: 1024 kB
(II) intel(0): VESA VBE OEM: Intel810™ Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 3.1
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: i810 Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module “ddc”
(II) LoadModule: “ddc”(II) Module “ddc” already built-in
(II) intel(0): VESA VBE DDC supported
(II) intel(0): VESA VBE DDC Level none
(II) intel(0): VESA VBE DDC transfer in appr. 0 sec.
(II) intel(0): VESA VBE DDC read failed
(–) intel(0): Chipset: “i810e”
(–) intel(0): Linear framebuffer at 0xF8000000
(–) intel(0): IO registers at addr 0xFEA80000
(II) intel(0): Kernel reported 112128 total, 1 used
(II) intel(0): I810CheckAvailableMemory: 448508k available
(==) intel(0): Will alloc AGP framebuffer: 24576 kByte
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(II) intel(0): Configured Monitor: Using default hsync range of 31.50-37.90 kHz
(II) intel(0): Configured Monitor: Using default vrefresh range of 50.00-70.00 Hz
(WW) intel(0): Unable to estimate virtual size
(II) intel(0): Clock range: 9.50 to 163.00 MHz
(II) intel(0): Not using default mode “640x350” (vrefresh out of range)
(II) intel(0): Not using default mode “320x175” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “640x400” (vrefresh out of range)
(II) intel(0): Not using default mode “320x200” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “720x400” (vrefresh out of range)
(II) intel(0): Not using default mode “360x200” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “320x240” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “640x480” (vrefresh out of range)
(II) intel(0): Not using default mode “320x240” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “640x480” (vrefresh out of range)
(II) intel(0): Not using default mode “320x240” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “640x480” (hsync out of range)
(II) intel(0): Not using default mode “320x240” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “400x300” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “400x300” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “800x600” (hsync out of range)
(II) intel(0): Not using default mode “400x300” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “800x600” (hsync out of range)
(II) intel(0): Not using default mode “400x300” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “800x600” (hsync out of range)
(II) intel(0): Not using default mode “400x300” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1024x768” (unknown reason)
(II) intel(0): Not using default mode “512x384” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1024x768” (hsync out of range)
(II) intel(0): Not using default mode “512x384” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1024x768” (hsync out of range)
(II) intel(0): Not using default mode “512x384” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1024x768” (hsync out of range)
(II) intel(0): Not using default mode “512x384” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1024x768” (hsync out of range)
(II) intel(0): Not using default mode “512x384” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1152x864” (hsync out of range)
(II) intel(0): Not using default mode “576x432” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1280x960” (hsync out of range)
(II) intel(0): Not using default mode “640x480” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1280x960” (hsync out of range)
(II) intel(0): Not using default mode “640x480” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1280x1024” (hsync out of range)
(II) intel(0): Not using default mode “640x512” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1280x1024” (hsync out of range)
(II) intel(0): Not using default mode “640x512” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1280x1024” (hsync out of range)
(II) intel(0): Not using default mode “640x512” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1600x1200” (hsync out of range)
(II) intel(0): Not using default mode “800x600” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1600x1200” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “800x600” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1600x1200” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “800x600” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1600x1200” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “800x600” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1600x1200” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “800x600” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1792x1344” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “896x672” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1792x1344” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “896x672” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1856x1392” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “928x696” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1856x1392” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “928x696” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1920x1440” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “960x720” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1920x1440” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “960x720” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “832x624” (hsync out of range)
(II) intel(0): Not using default mode “416x312” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1280x768” (hsync out of range)
(II) intel(0): Not using default mode “640x384” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1280x800” (hsync out of range)
(II) intel(0): Not using default mode “640x400” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1152x768” (hsync out of range)
(II) intel(0): Not using default mode “576x384” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1152x864” (hsync out of range)
(II) intel(0): Not using default mode “576x432” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1400x1050” (hsync out of range)
(II) intel(0): Not using default mode “700x525” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1400x1050” (hsync out of range)
(II) intel(0): Not using default mode “700x525” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1400x1050” (hsync out of range)
(II) intel(0): Not using default mode “700x525” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1400x1050” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “700x525” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1440x900” (hsync out of range)
(II) intel(0): Not using default mode “720x450” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1600x1024” (hsync out of range)
(II) intel(0): Not using default mode “800x512” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1680x1050” (hsync out of range)
(II) intel(0): Not using default mode “840x525” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1920x1200” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “960x600” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1920x1200” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “960x600” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1920x1440” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “960x720” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “2048x1536” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1024x768” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “2048x1536” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1024x768” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “2048x1536” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1024x768” (bad mode clock/interlace/doublescan)
(–) intel(0): Virtual size is 800x600 (pitch 1024)
() intel(0): *Default mode “800x600”: 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
() intel(0): *Default mode “800x600”: 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
() intel(0): *Default mode “640x480”: 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module “fb”
(II) LoadModule: “fb”
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module “ramdac”
(II) LoadModule: “ramdac”(II) Module “ramdac” already built-in
() intel(0): page flipping disabled
(II) intel(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(II) do I need RAC? No, I don’t.
(II) resource ranges after preInit:
[0] 0 0 0xfea80000 - 0xfeafffff (0x80000) MS[B]
[1] 0 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xfebfff80 - 0xfebfffff (0x80) MX[B]
[7] -1 0 0xfea80000 - 0xfeafffff (0x80000) MXB
[8] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MXB
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MSB
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MSB
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MSB
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00007880 - 0x000078ff (0x80) IX[B]
[15] -1 0 0x00007858 - 0x0000785f (0x8) IX[B]
[16] -1 0 0x00007860 - 0x0000787f (0x20) IX[B]
[17] -1 0 0x0000fe00 - 0x0000fe0f (0x10) IX[B]
[18] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[19] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]
[20] 0 0 0x000003b0 - 0x000003bb (0xc) ISB
[21] 0 0 0x000003c0 - 0x000003df (0x20) ISB
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:01.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
(II) [drm] loaded kernel module for “i810” driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer handle = 0xf8000000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): [drm] Registers = 0xfea80000
(II) intel(0): [agp] dcacheHandle : 0x0
(II) intel(0): [agp] GART: no dcache memory found
(II) intel(0): [agp] Bound backbuffer memory
(II) intel(0): [agp] Bound depthbuffer memory
(II) intel(0): [agp] Bound System Texture Memory
(II) intel(0): [agp] GART: Allocated 4K for mouse cursor image
(II) intel(0): [agp] GART: Allocated 16K for ARGB mouse cursor image
(II) intel(0): Adding 768 scanlines for pixmap caching
(II) intel(0): Allocated Scratch Memory
(II) intel(0): [dri] Buffer map : 149b000
(II) intel(0): [drm] added 256 4096 byte DMA buffers
(II) intel(0): [drm] Init v1.4 interface.
(II) intel(0): [drm] dma control initialized, using IRQ -22
(II) intel(0): [dri] visual configs initialized.
(==) intel(0): Write-combining range (0xf8000000,0x4000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Setting dot clock to 40.0 MHz [ 0x8 0x1 0x30 ] [ 10 3 3 ]
(II) intel(0): chose watermark 0x22007000: (tab.freq 40.0)
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
28 128x128 slots
6 256x256 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): DPMS enabled
(II) intel(0): [DRI] installation complete
(II) intel(0): Direct rendering enabled
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:01.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/i810_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(WW) Configured Mouse: No Device specified, looking for one…
(II) Configured Mouse: Setting Device option to “/dev/input/mice”
(–) Configured Mouse: Device: “/dev/input/mice”
(==) Configured Mouse: Protocol: “Auto”
() Option “CorePointer”
() Configured Mouse: always reports core events
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
() Configured Mouse: ZAxisMapping: buttons 4 and 5
() Configured Mouse: Buttons: 9
() Configured Mouse: Sensitivity: 1
() Option “CoreKeyboard”
() Generic Keyboard: always reports core events
() Option “Protocol” “standard”
() Generic Keyboard: Protocol: standard
() Option “AutoRepeat” “500 30”
() Option “XkbRules” “xorg”
() Generic Keyboard: XkbRules: “xorg”
() Option “XkbModel” “pc105”
() Generic Keyboard: XkbModel: “pc105”
() Option “XkbLayout” “fr”
() Generic Keyboard: XkbLayout: “fr”
() Option “XkbVariant” “latin9”
() Generic Keyboard: XkbVariant: “latin9”
() Option “CustomKeycodes” “off”
() Generic Keyboard: CustomKeycodes disabled
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device “Configured Mouse” (type: MOUSE)
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device “Generic Keyboard” (type: KEYBOARD)
(–) Configured Mouse: PnP-detected protocol: “ExplorerPS/2”
(II) Configured Mouse: ps2EnableDataReporting: succeeded[/code]

Si jamais quelqu’un a une idée et veux bien m’aider svp ?
Merci d’avance,
@+
Eric

[bobzer]

tu n’aurais pas fait une mis a jour des drivers graphique ??
un truc avec xorg et intel dans le nom?
sinon verifie ton xorg.conf
parceque ton probleme est assez bizarre
a noté que dans le fichir de log il est ecrit que ton ecran n’est pas trouver donc reverifie donc xorg.conf

[fran.b]

À vue de nez, cela ressemble à un souci de fréquence de balayage, essaye de préciser les champs HorizSync et VertRefresh dans la section “Monitor” du Xorg.conf avec éventuellement un modeline.

[Eric75]

Tous d’abord, merci d’avoir bien voulu répondre à mon appel à l’aide !!!

@bobzer :
Non, je n’ai fais aucune mise à jour…
La seule chose que j’ai faite une fois la Debian installée, c’est de modifier le /proc/sys/net/ipv4/tcp_window_scaling et de le mettre à 0 (à cause de mon modem Alice) et c’est là que j’ai redémarré la première fois. (et donc que je suis passé en 800x600)
Après, j’ai modifié ma sources-list (vu que la Debian pendant l’install ne voyait pas le Net) afin de faire un apt-get update + apt-get upgrade, mais aucun paquet n’était à mettre à jour…
C’est tout ce que j’ai fait !

Pour info, voici mon xorg.conf :[code]# xorg.conf (X.Org X Window System server configuration file)

This file was generated by dexconf, the Debian X Configuration tool, using

values from the debconf database.

Edit this file with caution, and see the xorg.conf manual page.

(Type “man xorg.conf” at the shell prompt.)

This file is automatically updated on xserver-xorg package upgrades only

if it has not been modified since the last upgrade of the xserver-xorg

package.

If you have edited this file but would like it to be automatically updated

again, run the following command:

sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option “XkbRules” "xorg"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
Option “XkbVariant” "latin9"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Configured Video Device"
Option “UseFBDev” "true"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection
[/code]Par contre, si je dois le modifier, je ne sais pas quoi mettre !!!

Et effectivement, mon “problème est assez bizarre” car quand j’ai démarré mon PC aujourd’hui (il y a 1/2h) j’étais bien en 1920x1200@60Hz !!! (Pour être vraiment sur et certain de la résolution utilisée à ce moment, j’ai vérifié dans “Centre de configuration de KDE/Périphériques/Affichage”)
Par contre, dès que j’ai redémarré (“Redémarrer l’ordinateur” pas “Eteindre l’ordinateur”) je suis repassé en 800x600@60Hz !!!
J’ai aussi essayé en éteignant complètement l’ordinateur (et même en débranchant la prise secteur, histoire d’éliminer un éventuel problème matériel) et en le rallumant quelques minutes après, mais malheureusement je suis resté en 800x600@60Hz !

@fran.b :
Comme je disais plus haut, si je dois modifier le xorg.conf, je ne sais pas comment le faire…

J’ai cherché sur le Net un exemple de xorg.conf pour mon moniteur (Dell 2407WFP-HC) et j’ai récupéré la partie “Monitor”, “Modes” et “Screen” que j’ai inséré dans mon xorg.conf mais au 1er redémarrage, l’ordinateur à démarré en mode console…

Je sent que c’est pas gagné tous ça !!!

[fran.b]

Ta ligne Modeline serait

avec un hsync à 74,52kHz

[code]
Section "Monitor"
Identifier "Configured Monitor"
Modeline “1920x1200” 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -HSync +Vsync
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Modes “1920x600”

EndSection[/code]

[Eric75]

fran.b :
J’ai fais les changements que tu m’as indiqué dans xorg.conf et j’ai redémarré… mais malheureusement en mode console !

Par contre, j’ai pensé à faire un startx, et il apparait une erreur dans les déclarations que j’ai rajouté : le mot-clé “Modes” n’est pas reconnu ![code]X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10)
Current Operating System: Linux unixsys 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686
Build Date: 09 January 2009 02:57:16AM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.

Module Loader present
Markers: (–) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Mon Feb 23 17:51:24 2009
(==) Using config file: “/etc/X11/xorg.conf"
Parse error on line 44 of section Screen in file /etc/X11/xorg.conf
"Modes” is not a valid keyword in this section.
(EE) Problem parsing the config file
(EE) Error parsing the config file

Fatal server error:
no screens found
(WW) xf86CloseConsole: KDSETMODE failed: Bad file descriptor
(WW) xf86CloseConsole: VT_GETMODE failed: Bad file descriptor[/code]

Mon xorg.conf modifié avec kwrite : (au cas où j’aurais merdé quelque part…)[code]# xorg.conf (X.Org X Window System server configuration file)

This file was generated by dexconf, the Debian X Configuration tool, using

values from the debconf database.

Edit this file with caution, and see the xorg.conf manual page.

(Type “man xorg.conf” at the shell prompt.)

This file is automatically updated on xserver-xorg package upgrades only

if it has not been modified since the last upgrade of the xserver-xorg

package.

If you have edited this file but would like it to be automatically updated

again, run the following command:

sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option “XkbRules” "xorg"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
Option “XkbVariant” "latin9"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Configured Video Device"
Option “UseFBDev” "true"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
Modeline “1920x1200” 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -HSync +Vsync
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Modes "1920x600"
EndSection[/code]

[fran.b]

remplace

Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Modes "1920x600" EndSectionpar

Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" SubSection "Display" Modes "1920x1200" EndSubSection EndSection

[Eric75]

1er démarrage après cette modif : plus d’erreur et KDE en 1920x1200@60Hz !!!
J’ai cru un instant que c’était bon.

Après redémarrage du PC sans toucher à quoi que ce soit : KDE de nouveau en 800x600@60Hz…

[Eric75]

Pour info, voici le Xorg.0.log.old (donc celui quand j’étais en 1920x1200@60Hz) si ça peut aider :[code]
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux Debian (xorg-server 2:1.4.2-10)
Current Operating System: Linux unixsys 2.6.26-1-686 #1 SMP Sat Jan 10 18:29:31 UTC 2009 i686
Build Date: 09 January 2009 02:57:16AM

Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.

Module Loader present
Markers: (–) probed, () from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: “/var/log/Xorg.0.log”, Time: Mon Feb 23 20:42:58 2009
(==) Using config file: “/etc/X11/xorg.conf”
(==) No Layout section. Using the first Screen section.
() |–>Screen “Default Screen” (0)
() | |–>Monitor “Configured Monitor”
(==) No device specified for screen “Default Screen”.
Using the first device section listed.
() | |–>Device “Configured Video Device”
(==) |–>Input Device “Configured Mouse”
(==) |–>Input Device “Generic Keyboard”
(==) The core pointer device wasn’t specified explicitly in the layout.
Using the first mouse device.
(==) The core keyboard device wasn’t specified explicitly in the layout.
Using the first keyboard device.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory “/usr/share/fonts/X11/cyrillic” does not exist.
Entry deleted from font path.
(WW) The directory “/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType” does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi
(==) RgbPath set to “/etc/X11/rgb”
(==) ModulePath set to “/usr/lib/xorg/modules”
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81e38c0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: “pcidata”
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,7124 card 0000,0000 rev 03 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,7125 card 1014,01e1 rev 03 class 03,00,00 hdr 00
(II) PCI: 00:1e:0: chip 8086,2418 card 0000,0000 rev 02 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,2410 card 0000,0000 rev 02 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,2411 card 8086,2411 rev 02 class 01,01,80 hdr 00
(II) PCI: 00:1f:2: chip 8086,2412 card 8086,2412 rev 02 class 0c,03,00 hdr 00
(II) PCI: 00:1f:3: chip 8086,2413 card 8086,2413 rev 02 class 0c,05,00 hdr 00
(II) PCI: 01:00:0: chip 1102,0002 card 1102,0020 rev 05 class 04,01,00 hdr 80
(II) PCI: 01:00:1: chip 1102,7002 card 1102,0020 rev 05 class 09,80,00 hdr 80
(II) PCI: 01:01:0: chip 10b7,9055 card 10b7,9055 rev 30 class 02,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:30:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x00007000 - 0x00007fff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfeb00000 - 0xfebfffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(–) PCI:*(0:1:0) Intel Corporation 82810E DC-133 (CGC) Chipset Graphics Controller rev 3, Mem @ 0xf8000000/26, 0xfea80000/19
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) Active PCI resource ranges:
[0] -1 0 0xfebfff80 - 0xfebfffff (0x80) MX[B]
[1] -1 0 0xfea80000 - 0xfeafffff (0x80000) MXB
[2] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MXB
[3] -1 0 0x00007880 - 0x000078ff (0x80) IX[B]
[4] -1 0 0x00007858 - 0x0000785f (0x8) IX[B]
[5] -1 0 0x00007860 - 0x0000787f (0x20) IX[B]
[6] -1 0 0x0000fe00 - 0x0000fe0f (0x10) IX[B]
[7] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[8] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfebfff80 - 0xfebfffff (0x80) MX[B]
[1] -1 0 0xfea80000 - 0xfeafffff (0x80000) MXB
[2] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MXB
[3] -1 0 0x00007880 - 0x000078ff (0x80) IX[B]
[4] -1 0 0x00007858 - 0x0000785f (0x8) IX[B]
[5] -1 0 0x00007860 - 0x0000787f (0x20) IX[B]
[6] -1 0 0x0000fe00 - 0x0000fe0f (0x10) IX[B]
[7] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[8] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebfff80 - 0xfebfffff (0x80) MX[B]
[5] -1 0 0xfea80000 - 0xfeafffff (0x80000) MXB
[6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MXB
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0 0x00007880 - 0x000078ff (0x80) IX[B]
[10] -1 0 0x00007858 - 0x0000785f (0x8) IX[B]
[11] -1 0 0x00007860 - 0x0000787f (0x20) IX[B]
[12] -1 0 0x0000fe00 - 0x0000fe0f (0x10) IX[B]
[13] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[14] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]
(II) LoadModule: “extmod”
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: “dbe”
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: “glx”
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: “freetype”
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: “record”
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: “dri”
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) Matched intel from file name intel.ids in autoconfig
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: “intel”
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 2.0
(II) LoadModule: “mouse”
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: “kbd”
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.0.90, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) Primary Device is: PCI 00:01:0
(–) Assigning device section with no busID to primary device
(–) Chipset i810e found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebfff80 - 0xfebfffff (0x80) MX[B]
[5] -1 0 0xfea80000 - 0xfeafffff (0x80000) MXB
[6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MXB
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[9] -1 0 0x00007880 - 0x000078ff (0x80) IX[B]
[10] -1 0 0x00007858 - 0x0000785f (0x8) IX[B]
[11] -1 0 0x00007860 - 0x0000787f (0x20) IX[B]
[12] -1 0 0x0000fe00 - 0x0000fe0f (0x10) IX[B]
[13] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[14] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0xfebfff80 - 0xfebfffff (0x80) MX[B]
[5] -1 0 0xfea80000 - 0xfeafffff (0x80000) MXB
[6] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MXB
[7] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[8] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[9] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x00007880 - 0x000078ff (0x80) IX[B]
[13] -1 0 0x00007858 - 0x0000785f (0x8) IX[B]
[14] -1 0 0x00007860 - 0x0000787f (0x20) IX[B]
[15] -1 0 0x0000fe00 - 0x0000fe0f (0x10) IX[B]
[16] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[17] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]
[18] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[19] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module “vgahw”
(II) LoadModule: “vgahw”
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(==) intel(0): Depth 16, (==) framebuffer bpp 16
(==) intel(0): RGB weight 565
(==) intel(0): Default visual is TrueColor
(II) Loading sub module “xaa”
(II) LoadModule: “xaa”
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module “vbe”
(II) LoadModule: “vbe”
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) Loading sub module “int10”
(II) LoadModule: “int10”
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(II) intel(0): initializing int10
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 2.0
(II) intel(0): VESA VBE Total Mem: 1024 kB
(II) intel(0): VESA VBE OEM: Intel810™ Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 3.1
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: i810 Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module “ddc”
(II) LoadModule: “ddc”(II) Module “ddc” already built-in
(II) intel(0): VESA VBE DDC supported
(II) intel(0): VESA VBE DDC Level 2
(II) intel(0): VESA VBE DDC transfer in appr. 1 sec.
(II) intel(0): VESA VBE DDC read successfully
(II) intel(0): Manufacturer: DEL Model: a025 Serial#: 809915731
(II) intel(0): Year: 2007 Week: 45
(II) intel(0): EDID Version: 1.3
(II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) intel(0): Sync: Separate Composite SyncOnGreen
(II) intel(0): Max H-Image Size [cm]: horiz.: 52 vert.: 33
(II) intel(0): Gamma: 2.20
(II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
(II) intel(0): Default color space is primary color space
(II) intel(0): First detailed timing is preferred mode
(II) intel(0): redX: 0.662 redY: 0.329 greenX: 0.205 greenY: 0.683
(II) intel(0): blueX: 0.146 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
(II) intel(0): Supported VESA Video Modes:
(II) intel(0): 720x400@70Hz
(II) intel(0): 640x480@60Hz
(II) intel(0): 640x480@75Hz
(II) intel(0): 800x600@60Hz
(II) intel(0): 800x600@75Hz
(II) intel(0): 1024x768@60Hz
(II) intel(0): 1024x768@75Hz
(II) intel(0): 1280x1024@75Hz
(II) intel(0): Manufacturer’s mask: 0
(II) intel(0): Supported Future Video Modes:
(II) intel(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) intel(0): #1: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
(II) intel(0): #2: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) intel(0): #3: hsize: 1680 vsize 1050 refresh: 60 vid: 179
(II) intel(0): Supported additional Video Mode:
(II) intel(0): clock: 154.0 MHz Image Size: 519 x 324 mm
(II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
(II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
(II) intel(0): Serial No: DR4747B50FUS
(II) intel(0): Monitor name: DELL2407WFPHC
(II) intel(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 170 MHz
(II) intel(0): EDID (in hex):
(II) intel(0): 00ffffffffffff0010ac25a053554630
(II) intel(0): 2d1101030e342178ee9bb5a95434ae25
(II) intel(0): 135054a54b008180a940714fb3000101
(II) intel(0): 010101010101283c80a070b023403020
(II) intel(0): 360007442100001a000000ff00445234
(II) intel(0): 37343742353046555320000000fc0044
(II) intel(0): 454c4c323430375746504843000000fd
(II) intel(0): 00384c1e5311000a202020202020009a
(II) intel(0): EDID vendor “DEL”, prod id 40997
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1920x1200"x0.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
(II) intel(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz)
(II) intel(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)
(II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
(–) intel(0): Chipset: “i810e”
(–) intel(0): Linear framebuffer at 0xF8000000
(–) intel(0): IO registers at addr 0xFEA80000
(II) intel(0): Kernel reported 112128 total, 1 used
(II) intel(0): I810CheckAvailableMemory: 448508k available
(==) intel(0): Will alloc AGP framebuffer: 24576 kByte
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(II) intel(0): Configured Monitor: Using hsync range of 30.00-83.00 kHz
(II) intel(0): Configured Monitor: Using vrefresh range of 56.00-76.00 Hz
(II) intel(0): Configured Monitor: Using maximum pixel clock of 170.00 MHz
(II) intel(0): Clock range: 9.50 to 163.00 MHz
(II) intel(0): Not using mode “1920x1200” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “640x350” (vrefresh out of range)
(II) intel(0): Not using default mode “320x175” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “640x400” (vrefresh out of range)
(II) intel(0): Not using default mode “320x200” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “720x400” (vrefresh out of range)
(II) intel(0): Not using default mode “360x200” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “320x240” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “320x240” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “320x240” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “640x480” (vrefresh out of range)
(II) intel(0): Not using default mode “320x240” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “400x300” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “400x300” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “400x300” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “400x300” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “800x600” (vrefresh out of range)
(II) intel(0): Not using default mode “400x300” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1024x768” (unknown reason)
(II) intel(0): Not using default mode “512x384” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “512x384” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “512x384” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “512x384” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1024x768” (vrefresh out of range)
(II) intel(0): Not using default mode “512x384” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “576x432” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “640x480” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1280x960” (hsync out of range)
(II) intel(0): Not using default mode “640x480” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “640x512” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “640x512” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1280x1024” (hsync out of range)
(II) intel(0): Not using default mode “640x512” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “800x600” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1600x1200” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “800x600” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1600x1200” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “800x600” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1600x1200” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “800x600” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1600x1200” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “800x600” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1792x1344” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “896x672” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1792x1344” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “896x672” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1856x1392” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “928x696” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1856x1392” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “928x696” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1920x1440” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “960x720” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1920x1440” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “960x720” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “416x312” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “640x384” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “640x400” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1152x768” (vrefresh out of range)
(II) intel(0): Not using default mode “576x384” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1152x864” (vrefresh out of range)
(II) intel(0): Not using default mode “576x432” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “700x525” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “700x525” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “700x525” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1400x1050” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “700x525” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “720x450” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “800x512” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “840x525” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “960x600” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “960x600” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1920x1440” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “960x720” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “2048x1536” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1024x768” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “2048x1536” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1024x768” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “2048x1536” (bad mode clock/interlace/doublescan)
(II) intel(0): Not using default mode “1024x768” (bad mode clock/interlace/doublescan)
(–) intel(0): Virtual size is 1920x1200 (pitch 2048)
() intel(0): *Driver mode “1920x1200”: 154.0 MHz, 74.0 kHz, 60.0 Hz
(II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz)
() intel(0): Driver mode “1600x1200”: 161.0 MHz, 74.5 kHz, 59.9 Hz
(II) intel(0): Modeline "1600x1200"x59.9 161.00 1600 1712 1880 2160 1200 1203 1207 1245 -hsync +vsync (74.5 kHz)
() intel(0): Default mode “1600x1200”: 162.0 MHz, 75.0 kHz, 60.0 Hz
(II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
() intel(0): Driver mode “1680x1050”: 146.2 MHz, 65.3 kHz, 60.0 Hz
(II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz)
() intel(0): Default mode “1680x1050”: 147.1 MHz, 65.2 kHz, 60.0 Hz
(II) intel(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 (65.2 kHz)
() intel(0): Default mode “1400x1050”: 155.8 MHz, 81.5 kHz, 74.8 Hz
(II) intel(0): Modeline "1400x1050"x74.8 155.80 1400 1464 1784 1912 1050 1052 1064 1090 +hsync +vsync (81.5 kHz)
() intel(0): Default mode “1400x1050”: 151.0 MHz, 77.0 kHz, 70.0 Hz
(II) intel(0): Modeline "1400x1050"x70.0 151.00 1400 1464 1656 1960 1050 1051 1054 1100 +hsync +vsync (77.0 kHz)
() intel(0): Default mode “1400x1050”: 122.0 MHz, 64.9 kHz, 60.0 Hz
(II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz)
() intel(0): Driver mode “1280x1024”: 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
() intel(0): Driver mode “1280x1024”: 109.0 MHz, 63.7 kHz, 59.9 Hz
(II) intel(0): Modeline "1280x1024"x59.9 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync (63.7 kHz)
() intel(0): Default mode “1280x1024”: 135.0 MHz, 80.0 kHz, 75.0 Hz
(II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
() intel(0): Default mode “1280x1024”: 108.0 MHz, 64.0 kHz, 60.0 Hz
(II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
() intel(0): Default mode “1440x900”: 108.8 MHz, 56.9 kHz, 60.2 Hz
(II) intel(0): Modeline "1440x900"x60.2 108.84 1440 1472 1880 1912 900 918 927 946 +hsync +vsync (56.9 kHz)
() intel(0): Default mode “1280x960”: 108.0 MHz, 60.0 kHz, 60.0 Hz
(II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
() intel(0): Default mode “1280x800”: 83.5 MHz, 49.7 kHz, 60.0 Hz
(II) intel(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 (49.7 kHz)
() intel(0): Driver mode “1152x864”: 104.0 MHz, 67.7 kHz, 74.8 Hz
(II) intel(0): Modeline "1152x864"x74.8 104.00 1152 1224 1344 1536 864 867 871 905 -hsync +vsync (67.7 kHz)
() intel(0): Default mode “1152x864”: 108.0 MHz, 67.5 kHz, 75.0 Hz
(II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
() intel(0): Default mode “1280x768”: 80.1 MHz, 47.7 kHz, 60.0 Hz
(II) intel(0): Modeline "1280x768"x60.0 80.14 1280 1344 1480 1680 768 769 772 795 (47.7 kHz)
() intel(0): Driver mode “1024x768”: 78.8 MHz, 60.1 kHz, 75.1 Hz
(II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
() intel(0): Driver mode “1024x768”: 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
() intel(0): Default mode “1024x768”: 78.8 MHz, 60.0 kHz, 75.0 Hz
(II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
() intel(0): Default mode “1024x768”: 75.0 MHz, 56.5 kHz, 70.1 Hz
(II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
() intel(0): Default mode “1024x768”: 65.0 MHz, 48.4 kHz, 60.0 Hz
(II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
() intel(0): Default mode “832x624”: 57.3 MHz, 49.7 kHz, 74.6 Hz
(II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
() intel(0): Driver mode “800x600”: 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
() intel(0): Driver mode “800x600”: 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
() intel(0): Default mode “800x600”: 49.5 MHz, 46.9 kHz, 75.0 Hz
(II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
() intel(0): Default mode “800x600”: 50.0 MHz, 48.1 kHz, 72.2 Hz
(II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
() intel(0): Default mode “800x600”: 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
() intel(0): Default mode “800x600”: 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
() intel(0): Driver mode “640x480”: 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
() intel(0): Driver mode “640x480”: 25.2 MHz, 31.5 kHz, 60.0 Hz
(II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
() intel(0): Default mode “640x480”: 31.5 MHz, 37.5 kHz, 75.0 Hz
(II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
() intel(0): Default mode “640x480”: 31.5 MHz, 37.9 kHz, 72.8 Hz
(II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
() intel(0): Default mode “640x480”: 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
() intel(0): Driver mode “720x400”: 28.3 MHz, 31.5 kHz, 70.1 Hz
(II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
() intel(0): Display dimensions: (520, 330) mm
() intel(0): DPI set to (93, 92)
(II) Loading sub module “fb”
(II) LoadModule: “fb”
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module “ramdac”
(II) LoadModule: “ramdac”(II) Module “ramdac” already built-in
() intel(0): page flipping disabled
(II) intel(0): XvMC is Disabled: use XvMCSurfaces config option to enable.
(II) do I need RAC? No, I don’t.
(II) resource ranges after preInit:
[0] 0 0 0xfea80000 - 0xfeafffff (0x80000) MS[B]
[1] 0 0 0xf8000000 - 0xfbffffff (0x4000000) MS[B]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[6] -1 0 0xfebfff80 - 0xfebfffff (0x80) MX[B]
[7] -1 0 0xfea80000 - 0xfeafffff (0x80000) MXB
[8] -1 0 0xf8000000 - 0xfbffffff (0x4000000) MXB
[9] 0 0 0x000a0000 - 0x000affff (0x10000) MSB
[10] 0 0 0x000b0000 - 0x000b7fff (0x8000) MSB
[11] 0 0 0x000b8000 - 0x000bffff (0x8000) MSB
[12] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[13] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[14] -1 0 0x00007880 - 0x000078ff (0x80) IX[B]
[15] -1 0 0x00007858 - 0x0000785f (0x8) IX[B]
[16] -1 0 0x00007860 - 0x0000787f (0x20) IX[B]
[17] -1 0 0x0000fe00 - 0x0000fe0f (0x10) IX[B]
[18] -1 0 0x0000ff00 - 0x0000ff1f (0x20) IX[B]
[19] -1 0 0x0000fff0 - 0x0000ffff (0x10) IX[B]
[20] 0 0 0x000003b0 - 0x000003bb (0xc) ISB
[21] 0 0 0x000003c0 - 0x000003df (0x20) ISB
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenByBusid: Searching for BusID pci:0000:00:01.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 9, (OK)
drmOpenByBusid: drmOpenMinor returns 9
drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
(II) [drm] loaded kernel module for “i810” driver.
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer handle = 0xf8000000
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(II) intel(0): [drm] Registers = 0xfea80000
(II) intel(0): [agp] dcacheHandle : 0x0
(II) intel(0): [agp] GART: no dcache memory found
(II) intel(0): [agp] Bound backbuffer memory
(II) intel(0): [agp] Bound depthbuffer memory
(II) intel(0): [agp] Bound System Texture Memory
(II) intel(0): [agp] GART: Allocated 4K for mouse cursor image
(II) intel(0): [agp] GART: Allocated 16K for ARGB mouse cursor image
(II) intel(0): Adding 384 scanlines for pixmap caching
(II) intel(0): Allocated Scratch Memory
(II) intel(0): [dri] Buffer map : d9b000
(II) intel(0): [drm] added 256 4096 byte DMA buffers
(II) intel(0): [drm] Init v1.4 interface.
(II) intel(0): [drm] dma control initialized, using IRQ -22
(II) intel(0): [dri] visual configs initialized.
(==) intel(0): Write-combining range (0xf8000000,0x4000000)
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) intel(0): Setting dot clock to 154.1 MHz [ 0x3b 0x11 0x10 ] [ 61 19 1 ]
(II) intel(0): chose watermark 0x22415000: (tab.freq 157.5)
(II) intel(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
29 128x128 slots
7 256x256 slots
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): DPMS enabled
(II) intel(0): [DRI] installation complete
(II) intel(0): Direct rendering enabled
(WW) intel(0): Option “UseFBDev” is not used
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:01.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:01.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/i810_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(WW) Configured Mouse: No Device specified, looking for one…
(II) Configured Mouse: Setting Device option to “/dev/input/mice”
(–) Configured Mouse: Device: “/dev/input/mice”
(==) Configured Mouse: Protocol: “Auto”
() Option “CorePointer”
() Configured Mouse: always reports core events
(==) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
() Configured Mouse: ZAxisMapping: buttons 4 and 5
() Configured Mouse: Buttons: 9
() Configured Mouse: Sensitivity: 1
() Option “CoreKeyboard”
() Generic Keyboard: always reports core events
() Option “Protocol” “standard”
() Generic Keyboard: Protocol: standard
() Option “AutoRepeat” “500 30”
() Option “XkbRules” “xorg”
() Generic Keyboard: XkbRules: “xorg”
() Option “XkbModel” “pc105”
() Generic Keyboard: XkbModel: “pc105”
() Option “XkbLayout” “fr”
() Generic Keyboard: XkbLayout: “fr”
() Option “XkbVariant” “latin9”
() Generic Keyboard: XkbVariant: “latin9”
() Option “CustomKeycodes” “off”
(**) Generic Keyboard: CustomKeycodes disabled
(II) evaluating device (Configured Mouse)
(II) XINPUT: Adding extended input device “Configured Mouse” (type: MOUSE)
(II) evaluating device (Generic Keyboard)
(II) XINPUT: Adding extended input device “Generic Keyboard” (type: KEYBOARD)
(–) Configured Mouse: PnP-detected protocol: “ExplorerPS/2”
(II) Configured Mouse: ps2EnableDataReporting: succeeded
(II) intel(0): [drm] removed 1 reserved context for kernel
(II) intel(0): [drm] unmapping 8192 bytes of SAREA 0xe0c12000 at 0xb7b85000
(II) intel(0): [drm] Closed DRM master.
(WW) intel(0): xf86UnMapVidMem: cannot find region for [0xb3944000,0x3000000]
FreeFontPath: FPE “/usr/share/fonts/X11/misc” refcount is 2, should be 1; fixing.
[/code]

[bobzer]

désolé mais la il va falloir que je refile le flambeau parceque je ne serais pas t’aider plus

[Mimoza]

Ayant une config en 1920*1200 je te met les partie qui peuvent t’intéresser

[code]Section "Device"
Identifier "carteVideo0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce 7600 GT"
BusID "PCI:3:0:0"
Screen 0
EndSection

Section "Monitor"
Identifier "LCD"
VendorName "Hanns.G"
ModelName "HSD Hanns.G HG281"
HorizSync 24.0 - 80.0
VertRefresh 56.0 - 75.0
Option “PreferredMode” "1920x1200"
EndSection

Section "Screen"
Identifier "ecran0"
Device "carteVideo0"
Monitor "LCD"
DefaultDepth 24
Option “TwinView” "0"
Option “metamodes” "DFP: 1920x1200 +0+0"
SubSection "Display"
Depth 24
Modes "1920x1200_60"
EndSubSection
EndSection[/code]

Sinon essaye un dpkg-reconfigure xserver-xorg pour refaire un fichier de configuration avec l’assitant

[Eric75]

Mimoza, je viens de faire un dpkg-reconfigure comme tu as indiqué mais il ne m’a posé que des questions à propos du clavier !!!

Voici mon nouvel xorg.conf : [code]# xorg.conf (X.Org X Window System server configuration file)

This file was generated by dexconf, the Debian X Configuration tool, using

values from the debconf database.

Edit this file with caution, and see the xorg.conf manual page.

(Type “man xorg.conf” at the shell prompt.)

This file is automatically updated on xserver-xorg package upgrades only

if it has not been modified since the last upgrade of the xserver-xorg

package.

If you have edited this file but would like it to be automatically updated

again, run the following command:

sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option “XkbRules” "xorg"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
Option “XkbVariant” "latin9"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
EndSection
[/code]En fait, il m’a viré ce que fran.b m’avait dit de mettre !

[fran.b]

Il suggérait une autre ligne modeline:

Essaye cette ligne. Mais je pense que ta carte se met de temps à autre dans un état second. Essaye de voir si c’est lié au fait qu’elle était en mode graphique ou en mode texte à l’arret…

[Mimoza]

Il me semblait qu’il demandait quand même la résolution voulu … et as tu essayer de configurer la résolution de l’ecran par le panneau de config KDE ? Dsl je ne peu pas essayer car je suis avec Gnome :smt002
Et avec cette modif ?

Section "Monitor" Identifier "Configured Monitor" Option "PreferredMode" "1920x1200" EndSection

[Eric75]

@fran.b : je crois que tu as mis le doigt sur le pb !

Pour info, la modif que tu m’as suggéré plante : le (74.0 kHz) fait une parse error !
J’ai donc du remettre l’ancienne version du xorg.conf et là, j’ai eu l’idée de démarrer le serveur X juste après la modif (en mode console donc, car d’habitude je redémarrais le PC) et là je suis en 1900x1200@60Hz !
Et après plusieurs essais, (en user normal et en root) à chaque fois que je démarre le X à partir de la console, je suis en 1900x1200@60Hz !!!
Histoire de, je retente un reboot complet du PC (donc démarrage auto en mode graphique) et bingo : je suis en 800x600@60Hz !
Je quitte la session (et arrive donc en mode console) je tape startx et je passe en… 1900x1200@60Hz !

C’est donc bien une histoire de démarrage à partir du mode texte/graphique comme tu le pensais…

Voici le xorg.conf qui fonctionne systhématiquement en mode console :[code]# xorg.conf (X.Org X Window System server configuration file)

This file was generated by dexconf, the Debian X Configuration tool, using

values from the debconf database.

Edit this file with caution, and see the xorg.conf manual page.

(Type “man xorg.conf” at the shell prompt.)

This file is automatically updated on xserver-xorg package upgrades only

if it has not been modified since the last upgrade of the xserver-xorg

package.

If you have edited this file but would like it to be automatically updated

again, run the following command:

sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option “XkbRules” "xorg"
Option “XkbModel” "pc105"
Option “XkbLayout” "fr"
Option “XkbVariant” "latin9"
EndSection

Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection

Section "Device"
Identifier "Configured Video Device"
EndSection

Section "Monitor"
Identifier "Configured Monitor"
Modeline “1920x1200” 193.16 1920 2048 2256 2592 1200 1201 1204 1242 -HSync +Vsync
EndSection

Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
SubSection "Display"
Modes "1920x1200"
EndSubSection
EndSection
[/code]

@Mimoza : si tu le veux, bien je vais essayer ta modif demain car là je pique sérieusement du nez !

[fran.b]

Vires le (74kHz), je n’avais pas fait attention (j’ai piqué la ligne dans ton Xorg.conf). Bon il s’agit de comprendre ce qui coince.

Essaye quand ça coince de faire

xrandr --newmode "1920x1200"  154.00  1920 1968 2000 2080  1200 1203 1209 1235 +hsync -vsync
xrandr --addmode VGA 1920x1200
xrandr --output VGA --mode 1920x1200

[Eric75]

Hello fran.b !

La première ligne de commande (en mode console) passe mais pas la deuxième :xrandr --addmode VGA 1920x1200 xrandr: cannot find output "VGA"

[fran.b]

[quote=“Eric75”]Hello fran.b !

La première ligne de commande (en mode console) passe mais pas la deuxième :xrandr --addmode VGA 1920x1200 xrandr: cannot find output "VGA"[/quote]
Que donne

[Eric75]

Quand je suis en 800x600@60Hz :Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm 800x600 60.0* 56.0 640x480 60.0Et quand je suis en 1920x1200@60Hz :Screen 0: minimum 640 x 400, current 1920 x 1200, maximum 1920 x 1200 default connected 1920x1200+0+0 0mm x 0mm 1920x1200 60.0* 1600x1200 60.0 1680x1050 60.0 1400x1050 75.0 70.0 60.0 1280x1024 75.0 60.0 1440x900 60.0 1280x960 60.0 1280x800 60.0 1152x864 75.0 1280x768 60.0 1024x768 75.0 60.0 70.0 832x624 75.0 800x600 75.0 60.0 72.0 56.0 640x480 75.0 60.0 73.0 720x400 70.0

[fran.b]

Remplace VGA par default dans mes commandes:

xrandr --newmode "1920x1200" 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync xrandr --addmode default 1920x1200 xrandr --output default --mode 1920x1200