[quote=“Monaliza78170”]et surtout à ce que toutes les fenêtres ‘rentrent dans l’écran’[/quote] 
… ça… c’est un problème de taille… 
(oui c’est pas drôle mais c’est vrai… 
)… par contre (au cas où)… pour déplacer “confortablement” une fenêtre: +clic(gauche) fait des merveilles…
Bon courage à tous et toutes… 
mona…
pour l’instant je ne pense pas que tu est vraiment besoin de compiz
mieux vaut un systeme fonctionel en premier
n’est-il pas ?
:smt003 
Certes, je suis d’accord avec toi. Pour l’installation, je n’ai pas installé acpi, je vais tester pour le bug de la température… Il me faudrait un moyen de voir précisément l’état de la batterie et le wifi…
Compiz, c’est pratique, je l’ai essayé pas mal de temps, et c’est aussi pour montrer les capacités de linux à quelques potes ^^…
Quel web browser me conseillez-vous? avec flash et java?? J’ai entendu parler du plugin tiny pour firefox. Qu’en est-il??
[quote=“Monaliza78170”] J’ai entendu parler du plugin tiny pour firefox. Qu’en est-il??[/quote]Ben il est pas mal… Je l’avais mis sous xandros, et c’est vrai que l’on gagne un peu en “place” sur l’écran (pas grand chose mais c’est déjà ça… )
Pour le navigateur, sur la Debian, j’avais mis iceweasel (=firefox…), il y a peut-être plus léger… Pour le flash et le java => les dépots “non-free”…
Bon courage à tous et toutes…
Num’s, je pensais à un label qu’on obtient avec un commande comme celle-ci :
Il ne me semble pas que cela ait rapport avec les UUID.
Après tu mets ta partoche (dans notre cas la carte SD)en montage automatique avec une ligne de ce style dans le /etc/fstab :
Pôôôôôô gentil de se moquer.
Pour moi l’utilité du truc vient dans un cas plus simple, c’est-à-dire quand tu bootes à la fois avec une clé USB (que tu aurais oublié de débrancher par inadvertance, j’ai pas de tête) et ta SD (/home).
J’ai déjà eu le tour une fois mon /home n’était pas monté car la clé USB à squatté sdb et donc la SD était reconnue en sdc 
Pôôôôôô gentil de se moquer.
Pour moi l’utilité du truc vient dans un cas plus simple, c’est-à-dire quand tu bootes à la fois avec une clé USB (que tu aurais oublié de débrancher par inadvertance, j’ai pas de tête) et ta SD (/home).
J’ai déjà eu le tour une fois mon /home n’était pas monté car la clé USB à squatté sdb et donc la SD était reconnue en sdc [/quote]Je ne me moquais pas… … j’ai déjà pensé à avoir plusieur sd pour avoir des /home différent… (un peu sdf quoi… ). Par contre, il me semblait que le lecteur “interne” (celui sur le coté) avait “toujours” comme “nom” /dev/sdb… mais bon… après, les rares fois où je démarre la bête avec une clé usb, c’est pour booter sur la-dite clé… … mais c’est vrai que celà pourrait être une “solution” pour être sûr d’avoir son /home à la bonne place…
Bon courage à tous et toutes…
En fait le gag s’est produit chez moi car j’avais mis une copie de mon cv sur ma clé et j’ai éteint la bête de temps d’aller acheter quelque pitance.
Après être rentré (et avoir rangé mes victuailles) j’avais allumé la machine et j’ai ralé un bon coup
slt ,
pour en revenir au changement de la carte sdd interne sur un 701 , c’est donc possible mais aparament on ne pourrais pas mettre plus de 12 Giga …
je continue les recherches
Salut à tous!!!
Je suis de retour!!!
Je suis en week-end en famille, avec un accès internet… Je suis donc en Ethernet, le wifi n’est pas configuré.
J’ai essayé d’installer firefox (iceweasel) mais il ne télécharge rien, j’ai alors installé epiphany, mis j’amerais bien le virer (proprement avec purge et clean) pour mettre iceweasel avec le plug-in tiny…
Il me faut aussi paramétrer le wifi (la hotkey wifi fonctionne, la diode bleue est allumée), ainsi que la natification de la puissance du processeur (dois-je installer cpufrequtils pour le faire fonctionner à 630 Mhz??)
Merci.
Je poste les logs de modules :
# /etc/modules: kernel modules to load at boot time.
#
# This file contains the names of kernel modules that should be loaded
# at boot time, one per line. Lines beginning with "#" are ignored.
# Parameters can be specified after the module name.
laptop_eeepcRe-Merci
Mona
Bonjour,
pour ne pas dépasser les 4Go d’install de Debian.
j’ai vu sur ce forum => http://forum.eee-pc.fr/sujet-1085-debian-lenny-eeepc
une liste de programme dont l’install fait 2,4Go
il n’y a pas beaucoup de détail sur l’installation
Je cherche un moyen efficace pour le wifi. J’ai téléchargé madwifi-modules-eeepc-2.6-686 et ajouté dans /etc/modules la ligne madwifi-modules-eeepc-2.6-686. J’ai ensuite installé knetworkmanager mais il ne se lance pas, et je ne trouve pas wicd…
Je dois pouvoir me connecter à tous les réseaux internet (clés WEP principalement) maisons, fac…
Merci
Bonjour
Retire là, ça n’a rien à voir.
Donnes les ligne de «dmesg» et du syslog en rapport avec ta carte wifi (est ce une atheros?)
voilà le dmesg
EeeMona:/home/monaliza# dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-5) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Wed Sep 10 16:46:13 UTC 2008
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001f780000 (usable)
[ 0.000000] BIOS-e820: 000000001f780000 - 000000001f790000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001f790000 - 000000001f7d0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001f7d0000 - 000000001f7de000 (reserved)
[ 0.000000] BIOS-e820: 000000001f7e0000 - 000000001f800000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 503MB LOWMEM available.
[ 0.000000] found SMP MP-table at [c00ff780] 000ff780
[ 0.000000] Entering add_active_range(0, 0, 128896) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 128896
[ 0.000000] HighMem 128896 -> 128896
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 128896
[ 0.000000] On node 0 totalpages: 128896
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 975 pages used for memmap
[ 0.000000] Normal zone: 123825 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI present.
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] Virtual Wire compatibility mode.
[ 0.000000] MPTABLE: OEM ID: INTEL Product ID: <6>MPTABLE: Product ID: <6>MPTABLE: APIC at: 0xFEE00000
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] I/O APIC #1 Version 32 at 0xFEC00000.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Processors: 1
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1f800000:df600000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
[ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
[ 0.000000] NR_CPUS: 8, nr_cpu_ids: 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127889
[ 0.000000] Kernel command line: root=/dev/sda1 ro quiet acpi=off
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 630.082 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.004000] Memory: 501580k/515584k available (1768k kernel code, 13492k reserved, 749k data, 244k init, 0k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
[ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.004000] vmalloc : 0xe0000000 - 0xff7fe000 ( 503 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xdf780000 ( 503 MB)
[ 0.004000] .init : 0xc037d000 - 0xc03ba000 ( 244 kB)
[ 0.004000] .data : 0xc02ba033 - 0xc0375620 ( 749 kB)
[ 0.004000] .text : 0xc0100000 - 0xc02ba033 (1768 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.084318] Calibrating delay using timer specific routine.. 1262.32 BogoMIPS (lpj=2524641)
[ 0.084409] Security Framework initialized
[ 0.084422] SELinux: Disabled at boot.
[ 0.084432] Capability LSM initialized
[ 0.084468] Mount-cache hash table entries: 512
[ 0.084825] Initializing cgroup subsys ns
[ 0.084834] Initializing cgroup subsys cpuacct
[ 0.084843] Initializing cgroup subsys devices
[ 0.084890] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.084898] CPU: L2 cache: 512K
[ 0.084910] Intel machine check architecture supported.
[ 0.084923] Intel machine check reporting enabled on CPU#0.
[ 0.084950] Checking 'hlt' instruction... OK.
[ 0.101069] SMP alternatives: switching to UP code
[ 0.114970] Freeing SMP alternatives: 16k freed
[ 0.115184] ExtINT not setup in hardware but reported by MP table
[ 0.115287] ENABLING IO-APIC IRQs
[ 0.115556] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.155309] CPU0: Intel(R) Celeron(R) M processor 900MHz stepping 08
[ 0.264016] Brought up 1 CPUs
[ 0.264016] Total of 1 processors activated (1262.32 BogoMIPS).
[ 0.264016] CPU0 attaching sched-domain:
[ 0.264016] domain 0: span 0
[ 0.264016] groups: 0
[ 0.264016] net_namespace: 660 bytes
[ 0.264016] Booting paravirtualized kernel on bare hardware
[ 0.264016] NET: Registered protocol family 16
[ 0.264016] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.264016] PCI: Using configuration type 1 for base access
[ 0.264016] Setting up standard PCI resources
[ 0.280964] ACPI: Interpreter disabled.
[ 0.280975] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.281056] pnp: PnP ACPI: disabled
[ 0.281067] PnPBIOS: Scanning system for PnP BIOS support...
[ 0.281132] PnPBIOS: Found PnP BIOS installation structure at 0xc00f7810
[ 0.281141] PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x88ca, dseg 0xf0000
[ 0.282852] PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
[ 0.283558] PCI: Probing PCI hardware
[ 0.283567] PCI: Probing PCI hardware (bus 00)
[ 0.284740] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.284757] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
[ 0.284767] pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
[ 0.285433] PCI: Transparent bridge - 0000:00:1e.0
[ 0.287971] PCI: Using IRQ router PIIX/ICH [8086/2641] at 0000:00:1f.0
[ 0.288005] PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 16
[ 0.288017] PCI->APIC IRQ transform: 0000:00:1b.0[A] -> IRQ 16
[ 0.288042] PCI->APIC IRQ transform: 0000:00:1c.0[A] -> IRQ 16
[ 0.288051] PCI->APIC IRQ transform: 0000:00:1c.1[B] -> IRQ 17
[ 0.288060] PCI->APIC IRQ transform: 0000:00:1c.2[C] -> IRQ 18
[ 0.288069] PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 23
[ 0.288078] PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 19
[ 0.288087] PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 18
[ 0.288097] PCI->APIC IRQ transform: 0000:00:1d.3[D] -> IRQ 16
[ 0.288105] PCI->APIC IRQ transform: 0000:00:1d.7[A] -> IRQ 23
[ 0.288119] PCI->APIC IRQ transform: 0000:00:1f.2[B] -> IRQ 19
[ 0.288128] PCI->APIC IRQ transform: 0000:00:1f.3[B] -> IRQ 19
[ 0.288138] PCI->APIC IRQ transform: 0000:03:00.0[A] -> IRQ 17
[ 0.288147] PCI->APIC IRQ transform: 0000:01:00.0[A] -> IRQ 18
[ 0.288996] hpet clockevent registered
[ 0.289009] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.289022] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.290127] system 00:00: iomem range 0x0-0x9fbff could not be reserved
[ 0.290136] system 00:00: iomem range 0x9fc00-0x9ffff could not be reserved
[ 0.290146] system 00:00: iomem range 0xe4000-0xfffff could not be reserved
[ 0.290155] system 00:00: iomem range 0x100000-0x1f77ffff could not be reserved
[ 0.290164] system 00:00: iomem range 0x1f780000-0x1f78ffff could not be reserved
[ 0.290173] system 00:00: iomem range 0x1f790000-0x1f7cffff could not be reserved
[ 0.290182] system 00:00: iomem range 0x1f7d0000-0x1f7ddfff could not be reserved
[ 0.290191] system 00:00: iomem range 0x1f7e0000-0x1f7fffff could not be reserved
[ 0.290201] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
[ 0.290210] system 00:00: iomem range 0xfff80000-0xffffffff could not be reserved
[ 0.290244] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.290252] system 00:0b: ioport range 0xcf8-0xcff could not be reserved
[ 0.290261] system 00:0b: ioport range 0x480-0x4bf has been reserved
[ 0.290269] system 00:0b: ioport range 0x800-0x87f has been reserved
[ 0.290277] system 00:0b: ioport range 0x400-0x41f has been reserved
[ 0.290286] system 00:0b: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.290302] system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.291388] PCI: Bridge: 0000:00:1c.0
[ 0.291394] IO window: disabled.
[ 0.291403] MEM window: disabled.
[ 0.291411] PREFETCH window: disabled.
[ 0.291422] PCI: Bridge: 0000:00:1c.1
[ 0.291426] IO window: disabled.
[ 0.291436] MEM window: 0xfbf00000-0xfbffffff
[ 0.291443] PREFETCH window: disabled.
[ 0.291454] PCI: Bridge: 0000:00:1c.2
[ 0.291458] IO window: disabled.
[ 0.291467] MEM window: 0xf8000000-0xfbefffff
[ 0.291476] PREFETCH window: 0x00000000f0000000-0x00000000f6ffffff
[ 0.291488] PCI: Bridge: 0000:00:1e.0
[ 0.291492] IO window: disabled.
[ 0.291501] MEM window: disabled.
[ 0.291508] PREFETCH window: disabled.
[ 0.291551] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.291583] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.291616] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.291635] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.291691] NET: Registered protocol family 2
[ 0.291934] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.292479] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.292748] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.293018] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.293025] TCP reno registered
[ 0.293285] NET: Registered protocol family 1
[ 0.293603] checking if image is initramfs...<7>Switched to high resolution mode on CPU 0
[ 0.985426] it is
[ 1.735608] Freeing initrd memory: 5765k freed
[ 1.737240] audit: initializing netlink socket (disabled)
[ 1.737279] type=2000 audit(1223135321.736:1): initialized
[ 1.737564] Total HugeTLB memory allocated, 0
[ 1.737795] VFS: Disk quotas dquot_6.5.1
[ 1.737867] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.737962] msgmni has been set to 991
[ 1.738280] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.738290] io scheduler noop registered
[ 1.738295] io scheduler anticipatory registered
[ 1.738301] io scheduler deadline registered
[ 1.738336] io scheduler cfq registered (default)
[ 1.738369] pci 0000:00:02.0: Boot video device
[ 1.766678] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 1.766728] assign_interrupt_mode Found MSI capability
[ 1.766788] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1.766902] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1.767079] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1.767129] assign_interrupt_mode Found MSI capability
[ 1.767180] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1.767281] Allocate Port Service[0000:00:1c.1:pcie02]
[ 1.767451] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 1.767499] assign_interrupt_mode Found MSI capability
[ 1.767550] Allocate Port Service[0000:00:1c.2:pcie00]
[ 1.767651] Allocate Port Service[0000:00:1c.2:pcie02]
[ 1.768005] isapnp: Scanning for PnP cards...
[ 2.122186] isapnp: No Plug & Play device found
[ 2.126961] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 2.131867] brd: module loaded
[ 2.132178] PNP: PS/2 Controller [PNP0303,PNP0f13] at 0x60,0x64 irq 1,12
[ 2.168020] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.168035] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.168518] mice: PS/2 mouse device common for all mice
[ 2.170912] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.170946] rtc0: alarms up to one day
[ 2.171050] cpuidle: using governor ladder
[ 2.171057] cpuidle: using governor menu
[ 2.171069] No iBFT detected.
[ 2.172182] TCP cubic registered
[ 2.172191] NET: Registered protocol family 17
[ 2.172207] Using IPI No-Shortcut mode
[ 2.172537] registered taskstats version 1
[ 2.172701] rtc_cmos 00:04: setting system clock to 2008-10-04 15:48:43 UTC (1223135323)
[ 2.172701] Freeing unused kernel memory: 244k freed
[ 2.193842] input: AT Translated Set 2 keyboard as /class/input/input0
[ 2.414755] thermal: Unknown symbol acpi_processor_set_thermal_limit
[ 3.203279] usbcore: registered new interface driver usbfs
[ 3.203351] usbcore: registered new interface driver hub
[ 3.203440] usbcore: registered new device driver usb
[ 3.223001] USB Universal Host Controller Interface driver v3.0
[ 3.223108] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.223118] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.223353] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 3.223401] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000e400
[ 3.223609] usb usb1: configuration #1 chosen from 1 choice
[ 3.223683] hub 1-0:1.0: USB hub found
[ 3.223702] hub 1-0:1.0: 2 ports detected
[ 3.324374] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.324387] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.324396] usb usb1: Product: UHCI Host Controller
[ 3.324402] usb usb1: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 3.324408] usb usb1: SerialNumber: 0000:00:1d.0
[ 3.324502] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.324513] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.324582] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.324627] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e480
[ 3.324825] usb usb2: configuration #1 chosen from 1 choice
[ 3.324902] hub 2-0:1.0: USB hub found
[ 3.324920] hub 2-0:1.0: 2 ports detected
[ 3.413714] SCSI subsystem initialized
[ 3.436939] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.436951] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.436960] usb usb2: Product: UHCI Host Controller
[ 3.436966] usb usb2: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 3.436972] usb usb2: SerialNumber: 0000:00:1d.1
[ 3.437076] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.437087] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.437157] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.437204] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000e800
[ 3.437415] usb usb3: configuration #1 chosen from 1 choice
[ 3.437493] hub 3-0:1.0: USB hub found
[ 3.437510] hub 3-0:1.0: 2 ports detected
[ 3.540297] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.540309] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.540317] usb usb3: Product: UHCI Host Controller
[ 3.540323] usb usb3: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 3.540329] usb usb3: SerialNumber: 0000:00:1d.2
[ 3.540420] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.540432] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.540499] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.540546] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000e880
[ 3.540750] usb usb4: configuration #1 chosen from 1 choice
[ 3.540830] hub 4-0:1.0: USB hub found
[ 3.540847] hub 4-0:1.0: 2 ports detected
[ 3.550117] libata version 3.00 loaded.
[ 3.644372] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.644383] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.644392] usb usb4: Product: UHCI Host Controller
[ 3.644398] usb usb4: Manufacturer: Linux 2.6.26-1-686 uhci_hcd
[ 3.644404] usb usb4: SerialNumber: 0000:00:1d.3
[ 3.646539] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.646552] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.646644] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.650573] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.650585] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.650605] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
[ 3.664053] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.664282] usb usb5: configuration #1 chosen from 1 choice
[ 3.664373] hub 5-0:1.0: USB hub found
[ 3.664401] hub 5-0:1.0: 8 ports detected
[ 3.768298] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.768310] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.768318] usb usb5: Product: EHCI Host Controller
[ 3.768324] usb usb5: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
[ 3.768330] usb usb5: SerialNumber: 0000:00:1d.7
[ 3.768968] ahci 0000:00:1f.2: version 3.0
[ 3.769034] ahci: probe of 0000:00:1f.2 failed with error -22
[ 3.774719] ata_piix 0000:00:1f.2: version 2.12
[ 3.774748] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 3.774832] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.774961] scsi0 : ata_piix
[ 3.775159] scsi1 : ata_piix
[ 3.775236] ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 3.775244] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 4.036023] usb 5-5: new high speed USB device using ehci_hcd and address 2
[ 4.108414] ata2.00: ATA-4: SILICONMOTION SM223AC, , max UDMA/66
[ 4.108424] ata2.00: 7815024 sectors, multi 0: LBA
[ 4.124384] ata2.00: configured for UDMA/66
[ 4.124654] scsi 1:0:0:0: Direct-Access ATA SILICONMOTION SM n/a PQ: 0 ANSI: 5
[ 4.145670] Uniform Multi-Platform E-IDE driver
[ 4.145683] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 4.169309] usb 5-5: configuration #1 chosen from 1 choice
[ 4.169758] usb 5-5: New USB device found, idVendor=0951, idProduct=1606
[ 4.169767] usb 5-5: New USB device strings: Mfr=1, Product=2, SerialNumber=4
[ 4.169775] usb 5-5: Product: UB6225
[ 4.169780] usb 5-5: Manufacturer: ENE
[ 4.169785] usb 5-5: SerialNumber: 146030377350
[ 4.198117] Driver 'sd' needs updating - please use bus_type methods
[ 4.198348] sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors (4001 MB)
[ 4.198393] sd 1:0:0:0: [sda] Write Protect is off
[ 4.198401] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.198472] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.198619] sd 1:0:0:0: [sda] 7815024 512-byte hardware sectors (4001 MB)
[ 4.198658] sd 1:0:0:0: [sda] Write Protect is off
[ 4.198666] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.198735] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[ 4.198747] sda: sda1
[ 4.200067] sd 1:0:0:0: [sda] Attached SCSI disk
[ 4.261906] Initializing USB Mass Storage driver...
[ 4.262109] scsi2 : SCSI emulation for USB Mass Storage devices
[ 4.262282] usbcore: registered new interface driver usb-storage
[ 4.262292] USB Mass Storage support registered.
[ 4.266545] usb-storage: device found at 2
[ 4.266555] usb-storage: waiting for device to settle before scanning
[ 4.406045] kjournald starting. Commit interval 5 seconds
[ 4.406079] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.083633] udevd version 125 started
[ 7.020875] Linux agpgart interface v0.103
[ 7.026505] agpgart: Detected an Intel 915GM Chipset.
[ 7.026839] agpgart: Detected 7932K stolen memory.
[ 7.058600] agpgart: AGP aperture is 256M @ 0xd0000000
[ 7.064091] Atheros(R) L2 Ethernet Driver - version 2.0.5
[ 7.064100] Copyright (c) 2007 Atheros Corporation.
[ 7.064188] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 7.192565] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 7.216872] ath_hal: module license 'Proprietary' taints kernel.
[ 7.222225] AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133, RF2425, RF2417)
[ 7.710680] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 8.205309] MadWifi: ath_attach: Switching rfkill capability off.
[ 8.241975] input: PC Speaker as /class/input/input1
[ 8.960104] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 8.960278] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x0860)
[ 8.960337] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 9.014548] Error: Driver 'pcspkr' is already registered, aborting...
[ 9.264250] usb-storage: device scan complete
[ 9.264865] scsi 2:0:0:0: Direct-Access USB2.0 CardReader SD0 0100 PQ: 0 ANSI: 0
[ 9.266893] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 9.295879] intel_rng: FWH not detected
[ 9.865203] wifi0: Atheros AR2425 chip found (MAC 14.2, PHY SChip 7.0, Radio 10.2)
[ 9.875244] ath_pci: wifi0: Atheros 5424/2424: mem=0xfbef0000, irq=18
[ 10.232552] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1, caps: 0xa04751/0xa00000
[ 10.319102] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 10.984550] EXT3 FS on sda1, internal journal
[ 12.445657] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 16.380072] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 19.961458] [drm] Initialized drm 1.1.0 20060810
[ 19.970416] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 19.970642] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 68.583245] NET: Registered protocol family 10
[ 68.584493] lo: Disabled Privacy Extensions
[ 78.920019] eth0: no IPv6 routers present
[ 78.936015] ath0: no IPv6 routers present
[ 363.448402] xfce4-cpufreq-p[1977]: segfault at 65636674 ip b76926b2 sp bff63040 error 4 in libc-2.7.so[b7622000+155000]
[ 384.800039] ath0: no IPv6 routers present
[ 385.157882] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 385.158428] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 385.158561] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 395.880036] eth0: no IPv6 routers present
[ 492.856015] ath0: no IPv6 routers present
[ 533.483516] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 533.483999] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 533.484150] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 543.812014] eth0: no IPv6 routers present
[ 610.565367] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 610.566143] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 610.566254] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 618.740053] ath0: no IPv6 routers present
[ 620.624019] eth0: no IPv6 routers present
[ 645.880037] ath0: no IPv6 routers present
[ 660.695180] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 660.695672] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 660.695780] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 664.312030] ath0: no IPv6 routers present
[ 671.440017] eth0: no IPv6 routers present
[ 718.675527] ADDRCONF(NETDEV_UP): ath0: link is not ready
[ 720.847279] ADDRCONF(NETDEV_UP): ath0: link is not ready
[ 721.205572] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 721.206044] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 721.206154] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 722.782653] ADDRCONF(NETDEV_UP): ath0: link is not ready
[ 724.627485] ADDRCONF(NETDEV_UP): ath0: link is not ready
[ 731.616018] eth0: no IPv6 routers present
[ 826.048780] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 826.049371] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 826.049485] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 836.888045] eth0: no IPv6 routers present
[ 901.553981] atl2: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 901.554604] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 901.554717] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 912.488018] eth0: no IPv6 routers presentJ’ai réussi à installer Wicd à partir du dépôt, il voit la livebox, je rentre la clé wpa mais ne parvient pas à se connecter. Je lui ai indiqué l’interface ath0 et madwifi comme pilote wpa mais pareil…
Comment faire pour la fréquence??? éventuellement la faire varier en fonction de l’utilisation…
Merci.
[ 7.710680] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 8.205309] MadWifi: ath_attach: Switching rfkill capability off.
L’interrupteur est correctement mis?
La diode bleue est allumée…
je vais voir dans le bios…30secondes
EDIT : c’est bon ,le WLAN est ‘enabled’
Bonjour,
et le résultat de iwconfig donne quoi?
si tu veu utilisé networkmanager tu dois ajouter ton user au groupe netdev
[quote=“Num’s”][quote=“Monaliza78170”]et surtout à ce que toutes les fenêtres ‘rentrent dans l’écran’[/quote] … ça… c’est un problème de taille… (oui c’est pas drôle mais c’est vrai… )[/quote]Pour gagner un peu de place, tu peux diminuer la taille de la police “générale” (possible sous gnome via la personnalisation du thème utilisé, dans les “détails”, celà doit être possible aussi avec xfce…) On ne gagne pas grand chose, mais c’est déjà ça… … Surtout qu’une fois la police diminuée, on peut réduire aussi la tailles des barres haute et basse d’autant… (sous gnome… à voir pour xfce… note: les bordures des fenêtres, elles, diminuent “automatiquement” avec la taille de la police…)
Oui je sais, ça ne répond pas à ton problème de wifi ça… 
…
Par contre, pour le wifi, ce que j’ai remarqué pour l’instant (vu que pour moi le wifi n’est pas une priorité…) c’est que je ne “vois” ma carte wifi avec wifi-radar ou airmon-ng (nan c’est pas pour pirater ça… c’est juste un outil… ) que si elle est “activée” au boot (si je reboot l’eee en “laissant” le wifi allumé…), si je coupe le wifi avec la hotkey et que je le remets… plus rien… 
(mais ça… je verrais après…)
Bon courage à tous et toutes…
[quote=“fennec.”]Bonjour,
pour ne pas dépasser les 4Go d’install de Debian.
j’ai vu sur ce forum => forum.eee-pc.fr/sujet-1085-debian-lenny-eeepc
une liste de programme dont l’install fait 2,4Go
il n’y a pas beaucoup de détail sur l’installation[/quote]
Je viens d’installer en plus de mon install openoffice pour voir l’espace utilisé :
J’ai donc iceweasel, gimp, openoffice (writer, calc draw, impress, math, base), compiz-fusion, xmms, wine + 2-3 merdes sur un environnement gnome.
Pour gagner un peu de place, j’ai installé localepurge, réglé le apt.conf sur aptitude false. Après un petit aptitude clean, voilà le résultat :
$ df -h
Sys. de fich. Tail. Occ. Disp. %Occ. Monté sur
/dev/sda4 3,8G 1,8G 2,0G 48% /
tmpfs 502M 4,0K 502M 1% /lib/init/rw
udev 10M 68K 10M 1% /dev
tmpfs 502M 0 502M 0% /dev/shm
/dev/sdb1 16G 852M 15G 6% /home
Bonjour!!!
Je n’ai toujours rien pour le wifi…
Je poste le iwconfig :
lo no wireless extensions
eth0 no wireless extensions…
J’ai lu quelque part u’il fallait ‘patcher’ madwifi. J’ai installé madwifi-eeepc-modules-2.6-686
Dois-je installer l’acpi pour eeepc??
Merci
[quote=“Num’s”]pour le wifi, ce que j’ai remarqué pour l’instant (…) c’est que je ne “vois” ma carte wifi avec wifi-radar(…) que si elle est “activée” au boot (si je reboot l’eee en “laissant” le wifi allumé…), si je coupe le wifi avec la hotkey et que je le remets… plus rien… (…)[/quote] … ça donne quoi “chez toi”? (j’ai le même comportement avec iwconfig, je ne “vois” l’interface wifi que si elle est démarrée au boot = lumière bleue dès le “POST”…)
Pour l’acpi pour eeepc, essayes, pour l’instant perso, il veut pas s’installer… 
… pb de dépendances…
Bon courage à tous et toutes…